Professional Documents
Culture Documents
IHS KNGDM Gtwy PDF
IHS KNGDM Gtwy PDF
Note: Kingdom Gateway does not require any additional middleware or licenses.
Related topics
Requirements and Supported Objects
The Workspace
Transferring Objects from Kingdom
Transferring Objects from Petrel
Conflict Resolution
Requirements and Supported Objects
Transfer Requirements
• Both Kingdom and Petrel projects must be open
• Projects must have same:
- Coordinate Reference System (CRS)
- Depth Units (ft/m)
- Surface Units (ft/m)
- SRD (Seismic Reference Datum)
Supported Objects
The following table defines the data types that Kingdom Gateway supports for transfer
between Kingdom and Petrel.
Wells **
Formation Tops
Interpreted Grids
Faults
Survey Geometry
Horizons
The Workspace
The Kingdom Gateway workspace is determined by the direction that objects are being
transferred; Kingdom to Petrel or Petrel to Kingdom. The default direction is Kingdom to
Petrel. To change the view, click the Direction drop down.
Related Topics
Kingdom to Petrel
Petrel to Kingdom
Kingdom to Petrel
There are two options when transferring objects from Kingdom to Petrel:
• Transfer Now—Default mode used to transfer objects immediately when dropped onto
the workspace.
• Add to List—This mode provides controls and filters that allow you to select and modify
object attributes or set thresholds before they are transferred.
Transfer objects from Kingdom to Petrel by dragging and dropping object(s) from the
Kingdom Project Tree anywhere onto the Kingdom Gateway Workspace.
Transfer Now
Using this method accepts all of an objects attributes and assigns Petrel’s default templates.
Add to List
The Add to List option provides additional controls to filter and select associated data
preferences. In addition, additional Petrel templates can be selected.
1 Selected Drop down list to select object types displayed in the List Pane(s).
Kingdom objects You can add multiple types of objects when building a list but only
display one type at a time in the List Pane(s).
2 List Pane(s) Dynamic list that provides parameters and filters of selected object
types attributes.
Petrel to Kingdom
All data objects available for transfer are shown in the Petrel Input Tree panel and can be
selected by either double-clicking or selecting objects and using the move buttons.
2 Source Project Selects the open Petrel project to transfer data from
4 Status Indicator Indicates the number of objects transferred during the last
operation and displays status messages when clicked.
Background color indicates the status:
• Grey = Ready
• Green = All objects transferred successfully
• Red = Issues found during last operation
6 Petrel Input Tree Available objects (see supported data types) for transfer
Related Topics
Transfer Now
Add to List
Transfer Now
The Transfer Now option allows users to immediately transfer data objects from Kingdom to
Petrel. Simply drag single, multiple or entire folders of objects from Kingdom onto the IHS
Kingdom Gateway workspace.
Add to List
The Add to List option provides greater control of which and how Kingdom objects are
transferred. Filters and controls allow you to define the attributes and value ranges of an
object being transferred.
a. Wells
- When wells are transferred, the Well Log Definition dialog is displayed showing
the current minimum and maximum values for each type of log.
- Select type of log to display from the drop down list
- Verify or select a template and unit for each log type.
- Click OK to continue.
a. Duplicate Objects
- If a transferred object already exists in Petrel, the Data Issues Found dialog will
be displayed with the option to skip, update or add the duplicate object(s).
Conflict Resolution
A conflict occurs when Kingdom objects being transferred all ready exist in a Petrel project.
When a conflict occurs, the Data Issues Found window displays with a separate tab for each
conflict type and number of conflicts.
There are three possible resolutions for duplicate objects:
• Skip—Duplicate object is ignored and does not transfer
• Update—Updates attributes of the existing object in target project
• Add—Adds duplicate object with appended name in target project
Note: Canceling without selecting a resolution will transfer only the non-conflicting objects.
Resolving Conflicts
Conflict resolution procedures are the same for Kingdom and Petrel transfers. However,
conflicts will never occur the first time an object is transferred back to Kingdom because the
objects name is appended with [Petrel] and thus viewed as a different object. If the same
object is transferred again, it will appear as a duplicate and require a resolution.
Apply to All
1. In the Global Duplicate Option list, select the resolution option.