Professional Documents
Culture Documents
ASTM Standards PDF
ASTM Standards PDF
TM er
1
P
M 00
et
Certified ho
ds
Reference
E Standards
4th Edition
T
R Member
O
L
E
U
M AccuStandard
®
Notice the Difference with AccuStandard
Experience in Petrochemical Requirements
• Years of Round Robin Studies with ASTM
• Ampulled over 300 gallons of ASTM fuel sets including
over 35 gasoline and hydrocarbon blends
• Standards for over 100 ASTM Methods
• 17 years of Manufacturing, Organic & Inorganic Standards
• Synthesizes rare Hydrocarbons not otherwise available
Resources
• Low Sulfur Analyzers (such as XOS) for Measurements to ppb Levels
• Instrumention for Analyzing Standards for ICP, ICP-MS, AA, GC/MS,
GC/FID, GC/EC, GC/NPD, Karl Fischer Titrator, and others
• NIST/NVLAP Accredited (Lab Code 200389-0) as a PT Provider
• ISO 9001:2000 Certified (ISO 9001 for the last 10 years)
• Extensive Inventory of ASTM and Related Standards
QC
Analytical Capabilities III D-5442 Petroleum Waxes by GC 31
On-Line Ordering IV D-5443 PNA Analysis by Multidimensional GC 31
Quality Control 1-2 D-5453 Sulfur by Ultra Violet Fluorescence 31
D-56 Flash Point Standards 3 D-5480 Engine Oil Volatility by GC 32
D-86 Synthetic Distillation Standard 3 D-5482 Vapor Pressure Standards 29, 32
D-92 Flash Point Standards (COC) 3 D-5501 Ethanol Analysis by GC 32
D-93 Flash Point Standards (PMCC) 3 D-5580 Aromatics by GC 32-33
ASTM
D-445 Viscosity Calibration Standard 3 D-5599 Oxygenates by OFID 34-36
D-611 Aniline Point Standard 4 D-5600 Trace Metals by ICP 37
D-1015 Freezing Point Standards 4 D-5622 Oxygenates by Reductive Pyrolysis 37
D-1319 Olefin Analysis by FIA 4 D-5623 Sulfur Compounds by Sulfur Selective Detection 38
D-1744 Water in Liquid Petroleum Products 5 D-5708 Trace Metals by ICP 39, 62
D-2386 Freezing Point Calibration Standards 5 D-5762 Nitrogen by Chemiluminescence 40
D-2500 Cloud Point Calibration Standards 5 D-5769 Aromatics by GC/MS 42-51
D-2622 Sulfur by XRF 10 D-5771 Cloud Point of Petro Products 52
D-2789 Hydrocarbon Analysis in Gasoline by GC/MS 11 D-5772 Cloud Point of Petro Products (Linear Cooling Rate) 52
SULFUR
PIANO, PONA, PNA by GC 12-13 D-5773 Cloud Point of Petro Products (Constant Cooling Rate) 52
Proposed Method for Detailed Hydrocarbon Analysis 14 D-5863 Trace Metals by AA 52
Detailed Hydrocarbon Analysis PONA VI 14 D-5901 Freezing Point Aviation Fuels (Auto Optical Method) 53
D-2887 Boiling Range by GC 14 D-5972 Freezing Point Aviation Fuels 53
Simulated Distillation (SIM DIS) by GC 15 D-5986 Oxygenates and Aromatics by GC/FTIR 53
D-3120 Sulfur by Oxidative Microcoulometry 16 D-6160 PCBs by GC 54
D-3230 Salts in Crude Oil 16 D-6258 Solvent Red 164 Dye Concentration in Diesel Fuels 54
D-3231 Phosphorus in Gasoline 16 D-6277 Benzene in Spark Ignition Fuels 54
WEAR METALS
D-3237 Lead in Gasoline by AA 16 D-6293 Oxygenates (O-PONA) in Engine Fuels by GC 55
D-3246 Sulfur in Petroleum Gas by Oxidative Microcoulometry 17 D-6296 Total Olefins in Spark Ignition Engine Fuels by GC 55
D-3340 Li & Na in Lubricating Greases by Flame Photometer 17 D-6304 Water in Liquid Petro Products 5
D-3524 Diesel Fuel Analysis by GC 17 D-6334 Sulfur in Gasoline by Wavelength WD-XRF 10, 56
D-3605 Trace Metal in Gas Turbine Fuels by AA 17 D-6352 Boiling Range Distribution of Petroleum 56
D-3606 Aromatics in Gasoline by GC 18 D-6378 Vapor Pressure 56
D-3610 Total Co Analysis by Potentiometric Titration 18 D-6379 Aromatic Hydrocarbon by HPLC 57
D-3710 Boiling Range by GC 20 D-6417 Engine Oil by GC 57
D-3798 p-Xylene Analysis by GC 20 D-6428 Sulfur by ECD 57
D-3831 Manganese in Gasoline by AA 20 D-6443 Metals in Oil 58-65
D-4059 PCB Analysis by GC 21 D-6445 Sulfur in Gasoline by ED-XRF 10, 58
PIANO
D-4110 Ion Chrom 76 D-6481 Lube Oils by ED-XRF 58, 63, 64
D-4291 Ethylene Glycol by GC 21 D-6550 Olefin Content of Gasoline by SFC 58
D-4294 Sulfur by ED-XRF 7-11, 21 D-6591 Aromatic Hydrocarbon by HPLC 57
D-4377 Water in Liquid Petroleum Products 5, 21 (IP 391)
D-4420 Aromatics in Gasoline by GC 22 E-1064 Water in Petroleum 6
D-4628 Wear Metals in Lube Oil 22 ISO/CD V & Ni with Mn 62
D-4629 Nitrogen by Chemiluminescence 23
D-4815 Oxygenates in Gasoline by GC 24 Organometallic (Wear Metals) Analysis by AA, ICP, DCP, XRF 26, 28, 59-66
ORGANOMETALLIC
D-4927 Wear Metals and Additives by WD-XRF 25,63 Plasma Emission Spectroscopy (ICP) 67-71
D-4928 Water in Liquid Petroleum Products 6, 25 ICP (No Haz Fee) New 67-71
D-4929 Chlorine in Crude Oil by Microcoulometry 25 Atomic Absorption Spectroscopy (AA) 67, 73-75
D-4951 Wear Metals and Additives by ICP 26 AA (No Haz Fee) New 67, 73-75
D-5056 Trace Metals in Petroleum Coke by AA 26 Plasma Emission / Mass Spectroscopy (ICP/MS) 72
D-5059 Lead in Gasoline by X-Ray Spectroscopy 27 Trace Metals, Chlorine in Lube Oil, and Organo Tin New 66
D-5134 Petroleum Naphthas through n-Nonane by GC 27 Ion Chrom 76-79
D-5184 Al and Si by ICP-AES & AA 28
D-5185 Wear Metals and Additives by ICP 28 LUFT/LUST and TPH (New Section) 81-98
D-5186 Aromatics by SFC 28
D-5188 Vapor - Liquid Ratio Temperature 29 Index i-vii
ICP & AA
D-5191 Vapor Pressure Standards 29 Quote Form back
D-5307 Boiling Range Distribution of Crude Petroleum by GC 29 Order Information back
Quality System is Certified to comply with the International ISO 9001:2000 Quality Standard
QUOTE FORM
Cross Reference Table Sorted by ASTM Method
Use the AccuStandard Cross ANALYSIS ASTM IP ISO DIN JIS AFNOR PAGE
Reference Tables to Match
Tag Flash Point D-56 51411 K 2580 M07-003 3
various International
Methods for known Distillation D-86 123 3405 51751 K 2254 M07-002 3
Petrochemical analysis. COC Flash Point D-92 36 2592 51376 K 2265 T60-118 3
Metals 14597 62
Miscellaneous
Ion Chromatograph, Waters 600E with
Conductivity detector 431, Alltech 335 Ion
Suppressor
Automatic Polarimeter, Zuzi W22
Karl Fischer Titrator
Lab Resources
Milligram to Kilogram Scale Glassware
Equipment to work under N2/Ar
Flash and Liquid Solid Phase Chrom. (mg to 2 kg)
Preparative TLC
Buchi Rotary Evaporator
Vacuum Drying Oven
Parr Pressure Reactor (high pressure reaction, hydrogenation)
Distillation Equipment - High Vacuum Distillation, Molecular
Distillation (Kugelrohr), Spinning Band Columns,
Packed and Vigreaux columns
Melting Point Apparatus
pH meter
Viscometer
Centrifuge
III
On-Line Ordering
There is an easier way to get Chemical Reference Standards
®
e-Standards from AccuStandard.com
5 Ways to Search
“e-Standards” is the Fastest, Most Comprehensive Search Engine
available and contains over 30,000 products.
Search by:
Catalog Number
Single or Multiple Components,
Method (EPA, ASTM, etc.)
Chemical Category (Organic, Inorganic, Petroleum, etc.)
Other Companys’ Part Number
Log on to www.accustandard.com and see how easy it is.
Custom Formulations
AccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a custom
formulation. Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. To
make an inquiry for Custom Quotes visit our website.
You can also Email your requirements to techservice@accustandard.com or Fax us at 203-786-5287. Please include the following
information: List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (milliliters
per ampule, bottle, or vial).
Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.
IV
Quality Control Standards Real World
Gasoline
QC D-02.03
D-02.04
QC
In cooperation with ASTM D-02 subcommittee 3 and 4, AccuStandard ampulled 21 Real World gasoline reference fuels. Consensus Values have
been determined for these reference fuels by various ASTM Round Robins to provide Petrochemical Laboratories with a source of well
characterized gasoline standards for use in QA/QC applications and as Single Blind test samples over an extended period of time. As new ASTM
D-02.03 and D-02.04 Test methods are promulgated they require mandatory Quality Control testing of real world samples. AccuStandard’s
PetroTest & PetroCheck standards are being successfully used to achieve these new Quality Control requirements.
AccuPetroCheck QC Standards
AccuPetroCheck Consensus Value QC Standards Two of the fuels are available as
AccuPetroCheck Consensus Value QC
CARB Low Sulfur RFG QC Conventional Gasoline QC Standards. The AccuPetroCheck CARB and
Standard Standard Conventional gasoline reference materials have
ASTM-FUEL-QCS-01-PAK $ 60 / 5 x 15 mL ASTM-FUEL-QCS-02-PAK $ 60 / 5 x 15 mL
all parameters listed on the certificate with the
Parameter Method Value Conc. Parameter Method Value Conc.
Total Aromatics D-1319 34.6 Vol.%
Consensus Values and the regression equations
Total Aromatics D-1319 24.5 Vol.%
Total Olefins D-1319 5.3 Vol.% Total Olefins D-1319 12.4 Vol.% for reproducability. Use of these Reference
Total Saturates D-1319 58.3 Vol.% Total Saturates D-1319 62.8 Vol.% Materials improve the quality of laboratory
Sulfur D-2622 0.0057 Wt.% Sulfur D-2622 0.0338 Wt.% results. The Consensus Values listed reflect
Sulfur D-4294 0.0078 Wt.% Sulfur D-4294 0.0368 Wt.%
Sulfur D-5453 55.76 µg/g Sulfur D-5453 317.36 µg/g initial statistical treatment of the data at the time
Sulfur D-6344 59.31 µg/g Sulfur D-6344 338.78 µg/g the catalog was published. The actual certificate
Benzene D-5769 0.80 Vol.% Benzene D-5769 0.55 Vol.% provided with the AccuPetroCheck QC standard
Toluene D-5769 4.92 Vol.% Toluene D-5769 5.53 Vol.%
Total Aromatics D-5769 32.51 Vol.%
will have the accepted Consensus Value based on
Total Aromatics D-5769 23.42 Vol.%
Benzene D-6277 0.78 Vol.% Benzene D-6277 0.52 Vol.% statistical treatment of the data.
Total Olefins D-6550 5.3 Vol.% Total Olefins D-6550 12.4 Vol.%
AccuPetroTest Gasoline
Technical Note
Comprehensive Single Blind Gasoline QC Sample This comprehensive
SBPT-COMP $ 50 / 2 x 15 mL
single blind gasoline QC
Parameter Method Approx. Range Conc.
sample tests for more
Total Aromatics D-1319 8 - 60 Vol.%
Total Olefins D-1319 1 - 40 Vol.%
parameters from a single
Total Saturates D-1319 30 - 80 Vol.% sample. The actual
Sulfur D-2622 0.0001 - 0.0930 Wt.% gasoline sample will have
Sulfur D-4294 0.0016 - 0.0930 Wt.% consensus values listed
Sulfur D-5453 0.5 -500 µg/g on the datasheet that fall
Sulfur D-6344 1.0 - 1000 µg/g within the range listed for
Benzene D-5769 0.1 - 2.0 Vol.%
each parameter.
Toluene D-5769 1.0 - 15 Vol.%
Total Aromatics D-5769 8 - 60 Vol.%
Benzene D-6277 0.1 - 2.0 Vol.%
Total Olefins D-6550 1 - 40 Vol.%
Quality Control Standards
continue on next page
2 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Physical Properties Method 56, 92, 93
86
445
Member
QC
ASTM D-56, D-92, D-93 Flash Point Standards
Verified by consensus analysis using ASTM Method # referenced Originally designed for
ASTM D-56-98a,
Cat. No. ASTM # Nominal Flash Point Price / Unit D-92-98a, D-93-99b
ASTM
ASTM-P-132-01 PMCC D93 65°C $ 110 / 250 mL
ASTM-P-132-02 PMCC D93 93°C 110 / 250 mL
ASTM-P-132-03 COC D92 200°C 110 / 250 mL
ASTM-P-132-04 COC D92 230°C 110 / 250 mL
ASTM D-92 & Flash & Fire Points by Cleveland Open Cup (COC) &
ASTM D-93 Flash Point by Pensky Martin Closed Cup (PMCC)
See Method D-56 on this page for the comprehensive line of flash point standards
Cat. No. Nominal Aniline Point Price / Unit Originally designed for
D-611-82
D-611-SET Set include 5 Standards listed below $ 90 / 5 x 20 mL
Aniline Point Verification Set
Method 611(A)
D-611-01 0°C 20 mL
D-611-02 30°C 20 mL
D-611-03 55°C 20 mL
D-611-04 68°C 20 mL
D-611-05 94°C 20 mL
Cat. No. Nominal Aniline Point Price / Unit
ASTM D-1319 Calibration Standards by Fluorescent Indicator Adsorption FIA Technical Note
Originally
The following set of standards
Olefin FIA Calibration Curve designed for have been prepared for the
FIA-CAL-SET $ 300 / Set of 7 x 1 mL D-1319-99 determination of Aromatics,
Olefins, Oxygenates and
Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7
Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Saturates in petroleum fractions
D-1319 by Fluorescent Indicator
Total Olefins 2.0 4.0 5.0 6.0 8.0 10.0 12.0
Meets Adsorption (FIA) IP designation
Total Paraffins 57.0 55.0 52.0 51.0 45.0 45.0 40.0 es
EPA Guidelin 156/95.
Total Aromatics 23.0 24.0 25.0 26.0 29.0 28.0 30.0 for RFG
Total Oxygenate 18.0 17.0 18.0 17.0 18.0 17.0 18.0 Analysis
The final certificate for the FIA
calibration curve lists not only
the volume percents for the
FIA Paraffin Standard FIA Olefin Standard hydrocarbon types, but also the
FIA-PAR $ 30 / 1 x 1 mL FIA-OLE $ 40 / 1 x 1 mL individual volume percents for
FIA-PAR-5ML SAVE 33% $ 100 / 1 x 5 mL FIA-OLE-5ML SAVE 40% $ 120 / 1 x 5 mL
each analyte in the functional
8 comps. 3 comps.
group.
Vol. % Vol. % Vol. % Vol. %
n-Pentane 8 2,3-Dimethylpentane 14 1-Pentene 33.3 1-Heptene 33.3 To further assist the
n-Hexane 9 Isooctane 16 2,3-Dimethyl-2-butene 33.3 Petrochemist, the weight fraction
Cyclohexane 15 n-Octane 14 for each hydrocarbon type and
n-Heptane 14 n-Decane 7 individual analyte is listed on the
Standards of Interest
final certificate. By providing the
For the mandatory real world QC samples individual weights the
FIA Aromatic Standard stipulated in the Method, see page 1-2 Petrochemical chemist can use
FIA-ARO $ 30 / 1 x 1 mL the FIA standards for other
FIA-ARO-5ML SAVE 33% $ 100 / 1 x 5 mL
types of instrumentation
10 comps.
measuring these Petroleum
mix ratio mix ratio
fractions.
Benzene 4 m-Xylene 16
Toluene 32 1,2,4-Trimethylbenzene 8
Ethylbenzene 8 1,3,5-Trimethylbenzene 8
p-Xylene 8 1,2,4,5-Tetramethylbenzene 4
o-Xylene 8 Naphthalene 4
4 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Physical Properties Method 1744-
6304
2386
Member 2500
ASTM
Many ASTM Petrochemical
Cat. No. Description Price / Unit methods and specifications
reference using QA/QC
KF-0.6X-5ML-VAP Water content 60 µg/g $ 65 / 10 x 5 mL Value Added Paks (Cat. No.’s
standards for water content
KF-1X-2ML-VAP Water content 100 µg/g 40 / 10 x 2 mL ending in -VAP) provide
measurements. AccuStandard
KF-1X-5ML-VAP Water content 100 µg/g 45 / 10 x 5 mL multiple single units packaged
KF-1X-20ML-PAK Water content 100 µg/g 50 / 5 x 20 mL has formulated a comprehensive
together for both greater
KF-10X-2ML-VAP Water content 1000 µg/g 40 / 10 x 2 mL
range of water standards
stability and cost savings.
KF-10X-5ML-VAP Water content 1000 µg/g 45 / 10 x 5 mL packaged in convenient sizes to
KF-10X-20ML-PAK Water content 1000 µg/g 50 / 5 x 20 mL meet the various referenced
KF-50X-2ML-VAP Water content 5000 µg/g 40 / 10 x 2 mL methods.
KF-50X-5ML-VAP Water content 5000 µg/g 45 / 10 x 5 mL
KF-50X-20ML-PAK Water content 5000 µg/g 50 / 5 x 20 mL
D-2622-98, D-3120-96, D-3246-96, D-4294-98, D-5453-00, D-6334-98, D-6445-99 & Proposed ASTM Sulfur Methods
AccuStandard offers the Petroleum Industry the most complete line of calibration standards designed for today’s Proposed &
Promulgated test methods for Sulfur analysis. These calibration standards are designed specifically for the analysis of Sulfur in a
wide variety of matrices such as #2 diesel fuel, white mineral oil, kerosene, gasoline, crude oil & residual oil.
ASTM
Convenient Packaging
Since applicable concentration ranges will vary based on the instrumentation used & the nature of the sample the standards can be
ordered as complete sets, individual bottles, or Ready-to-Aspirate AccuShots.
ASTM D-5453
Test to Low ppb
Sulfur
6 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Analytical Capabilities
MWD XRF Sulfur Analyzer
in Diesel and Gasoline Fuels
SULFUR
Dynamic range: 0-1000 ppm in one
calibration.
Exceptional signal-to-background
provides high sensitivity for
low-level sulfur fuels
X-Ray Optical Systems, Inc.
15 Tech Valley Drive
East Greenbush, NY 12061
Tel. 518-880-1500
website: www.xos.com
SULFUR ANALYSIS IN
XOS SINDIE Analyzer ULTRA LOW SULFUR FUELS
X-Ray optics enable detection capability well Repeatability:
beyond traditional XRF techniques. The 1 ppm 0.5 ppm
same Monochromatic WD XRF technology 10 ppm 1.7 ppm
of the SINDIE bench-top sulfur analyzer is 100 ppm 5.3 ppm
available in an on-line sulfur analyzer. 500 ppm 11.7 ppm
7
Sulfur in
Mineral Oil
Diesel Fuel
Sulfur Standards
ASTM Methods
Sulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &
Proposed ASTM Sulfur Methods
Sulfur in Heavy Weight Mineral Oil (75 cSt) Sulfur in Light Weight Mineral Oil (20 cSt)
Sulfur in Ready-to-Use Sulfur in Ready-to-Use
Concentration White Mineral Oil Sulfur AccuShots Concentration White Mineral Oil Sulfur AccuShots
µg/g Wt. % Cat. No. Cat. No. µg/g Wt. % Cat. No. Cat. No.
Blank 0.000 SWMO-BL-4 SWMO-BL-SHOT Blank 0.000 SWMO-LT-BL-4 SWMO-LT-BL-SHOT
100 0.010 SWMO-1X-4 SWMO-1X-SHOT 100 0.010 SWMO-LT-1X-4 SWMO-LT-1X-SHOT
200 0.020 SWMO-2X-4 SWMO-2X-SHOT 200 0.020 SWMO-LT-2X-4 SWMO-LT-2X-SHOT
SULFUR
Technical Note
Cross Reference Table
ASTM IP ISO DIN JIS AFNOR sorted by
Sulfur conc. calculated from % sulfur in di-n-butyl sulfide
ASTM Method see beginning of Catalog
8 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Method
Sulfur Standards ASTM
SulfurMethods for
Kerosene
in
Sulfur
ASTM Methods
Sulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &
Proposed ASTM Sulfur Methods
ASTM
Sulfur in Light Distillate Kerosene Sulfur in Heavy Distillate Kerosene
Sulfur concentration
Sulfur in Light Ready-to-Use Sulfur in Heavy calculated from % sulfur
Concentration Distillate Kerosene Sulfur AccuShots Concentration Distillate Kerosene
in di-n-butyl sulfide.
µg/g Wt. % Cat. No. Cat. No. µg/g Wt. % Cat. No.
Blank 0.000 SK-BL-4 SK-BL-SHOT Blank 0.000 SK-HD-BL-4
100 0.010 SK-1X-4 SK-1X-SHOT 100 0.010 SK-HD-1X-4
200 0.020 --------------- 200 0.020 SK-HD-2X-4 Standards of Interest
SULFUR
300 0.030 SK-3X-4 SK-3X-SHOT 300 0.030 SK-HD-3X-4
400 0.040 --------------- 400 0.040 SK-HD-4X-4 For the mandatory real
500 0.050 SK-5X-4 SK-5X-SHOT 500 0.050 SK-HD-5X-4 world QC samples
750 0.075 SK-7.5X-4 SK-7.5X-SHOT 750 0.075 SK-HD-7.5X-4 stipulated in the Method,
1,000 0.10 SK-10X-4 SK-10X-SHOT 1,000 0.10 SK-HD-10X-4 see pages 1- 2.
1,500 0.15 --------------- 1,500 0.15 SK-HD-15X-4
2,000 0.20 SK-20X-4 SK-20X-SHOT 2,000 0.20 SK-HD-20X-4
3,000 0.30 SK-30X-4 SK-30X-SHOT 3,000 0.30 SK-HD-30X-4
4,000 0.40 SK-40X-4 SK-40X-SHOT 4,000 0.40 SK-HD-40X-4
5,000 0.50 SK-50X-4 SK-50X-SHOT 5,000 0.50 SK-HD-50X-4
7,000 0.70 --------------- 7,000 0.70 SK-HD-70X-4
10,000 1.00 SK-100X-4 SK-100X-SHOT 10,000 1.00 SK-HD-100X-4
15,000 1.50 --------------- 15,000 1.50 SK-HD-150X-4
20,000 2.00 SK-200X-4 SK-200X-SHOT 20,000 2.00 SK-HD-200X-4
30,000 3.00 --------------- 30,000 3.00 SK-HD-300X-4
40,000 4.00 --------------- 40,000 4.00 SK-HD-400X-4
50,000 5.00 --------------- 50,000 5.00 SK-HD-500X-4
60,000 6.00 --------------- 60,000 6.00 SK-HD-600X-4
Set of above SK-CAL-SET-4 Each AccuShot product Set of above SK-HD-CAL-SET-4
Cat. No.’s 12 x 4 oz. $ 500 contains 5 x 20 mL Cat. No.’s 21 x 4 oz. $ 950
ampules at the stated Individual Sulfur 1 -10 units 10 +units
Individual Sulfur 1 -10 units 10 +units
conc. for $ 60 Standards 4 oz Bottle $ 55 ea $ 50 ea
Standards 4 oz Bottle $ 55 ea $ 50 ea
ASTM D-2622, D-4294 Sulfur Calibration Standards ASTM D-2622, D-6334, Low Level Sulfur
D-6445 Calibration Standards
Sulfur Calibration Standards in Isooctane for
Gasoline & Reformulated Gasoline Analysis Low Level Sulfur Calibration Standards for use on
XRF Energy Dispersive or Wavelength Instruments
ASTM
Technical Note
Technical Note
Well characterized Thiophene & 2-Methyl thiophene are used
A well characterized di-n-butyl sulfide starting mat’l is used with a in a low sulfur Isooctane/Toluene matrix for this calibration set.
low sulfur Isooctane matrix for RFG/gasoline sulfur standards.
ASTM D-3120, D-3246 Sulfur Calibration Set ASTM D-2622, D-6334, Mid Level Sulfur
D-6445 Calibration Standards
Sulfur Calibration Set
D-3120-92-CAL-SET $ 75 / set of 8 x 1 mL New Requested Additions for use on XRF Energy
In Isooctane Dispersive or Wavelength Instruments
Cat. No. Sulfur Conc. Sulfur Wt. % Originally Standards can be mixed for quantity discounts Originally
D-3120-92-BL Blank ——— designed for
1 to 4 units $ 60 each per Sulfur Standard designed for
D-3120-92-1X 1 µg/g 0.0001 D-3120-96
5 to 10 units $ 55 each per Sulfur Standard D-2622-98
D-3120-92-3X 3 µg/g 0.0003 D-3246-96
more than 10 units $ 50 each per Sulfur Standard D-6334-98
D-3120-92-10X 10 µg/g 0.0010
D-6445-99
D-3120-92-30X 30 µg/g 0.0030
D-3120-92-50X 50 µg/g 0.0050 Cat. No. Sulfur Conc. Sulfur Wt. % Unit
D-3120-92-75X 75 µg/g 0.0075 D-2622-LL-200X-4 200 µg/g 0.020 4 oz
D-3120-92-100X 100 µg/g 0.010 D-2622-LL-400X-4 400 µg/g 0.040 4 oz
D-2622-LL-600X-4 600 µg/g 0.060 4 oz
D-2622-LL-700X-4 700 µg/g 0.070 4 oz
Technical Note D-2622-LL-800X-4 800 µg/g 0.080 4 oz
D-2622-LL-900X-4 900 µg/g 0.090 4 oz
Well characterized di-n-butyl sulfide is used in a low sulfur D-2622-LL-1100X-4 1100 µg/g 0.110 4 oz
Isooctane matrix for this calibration set. D-2622-LL-1200X-4 1200 µg/g 0.120 4 oz
Technical Note
Standards of Interest Well characterized Thiophene & 2-Methyl thiophene are used
For the mandatory real world QC samples stipulated in many in a low sulfur Isooctane/Toluene matrix for this calibration set.
ASTM Sulfur Methods, see page 1-2
10 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Sulfur Standards ASTM 2789
ASTM Methods
Sulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 &
Proposed ASTM Sulfur Methods
ASTM
1,000 0.10 SCO-10X-4 3,500 0.35 SRO-35X-4 calibration standards to meet
2,500 0.25 SCO-25X-4 7,000 0.70 SRO-70X-4 unique laboratory applications.
5,000 0.50 SCO-50X-4 10,000 1.00 SRO-100X-4 Call or fax us your standard
10,000 1.00 SCO-100X-4 15,000 1.50 SRO-150X-4 requirements.
20,000 2.00 SCO-200X-4 20,000 2.00 SRO-200X-4
30,000 3.00 SCO-300X-4 30,000 3.00 SRO-300X-4
40,000 4.00 SCO-400X-4 40,000 4.00 SRO-400X-4
50,000 5.00 SCO-500X-4
SULFUR
Set of above SCO-CAL-SET-4 Set of above SRO-CAL-SET-4
Cat. No.’s 8 x 4 oz. $ 500 Cat. No.’s 7 x 4 oz. $ 450
Individual Sulfur 1 -10 units 10 +units Individual Sulfur 1 -10 units 10 +units
Standards 4 oz Bottle $ 75 ea $ 65 ea Standards 4 oz Bottle $ 75 ea $ 65 ea
ASTM-SSTD-A/B-SET $ 100 / 10 x 2 mL
The set contains the following 10 standards in isooctane
BOOK-TPH $ 35 S-3571 $ 25
12 Quality System is Certified to comply with the International ISO 9001 Quality Standard
PIANO, PONA, PNA PIANO
PONA
PNA
PIANO
PIONA
The actual certificate will have the exact actual certificate will have the exact Wt. % for The actual certificate will have the exact Wt. %
Wt. % for each analyte. each analyte. for each analyte.
Typ. Wt. % Typ. Wt. %
Typ. Wt. %
Cyclopentane 4.9143 3-Methyl-1-butene 1.9396
Benzene 7.1437
Methylcyclopentane 3.2829 1-Pentene 4.1355
Toluene 4.5738
Cyclohexane 5.3268 2-Methyl-1-butene 1.4440
EthylBenzene 6.7670
1,1-Dimethylcyclopentane 3.4612 2-Methyl-1,3-butadiene 2.3889
m-Xylene 2.2259
cis-1,3-Dimethylcyclopentane 0.5963 trans-2-Pentene 1.8034
p-Xylene 4.4815
trans-1,2-Dimethylcyclopentane 1.4715 cis-2-Pentene 1.9792
o-Xylene 2.2519
trans-1,3-Dimethylcyclopentane 2.7531 4-Methylpentene-1 3.4372
Isopropylbenzene 2.2248
Methylcyclohexane 5.6091 1-Hexene 7.0484
n-Propylbenzene 4.4979
Ethylcyclopentane 3.5534 trans-2-Hexene 1.7302
1-Methyl-3-ethylbenzene 2.2243
ctc-1,2,3-Trimethylcyclopentane 1.5859 2-Methylpentene-2 3.3901
1-Methyl-4-ethylbenzene 2.2206
cct-1,2,4-Trimethylcyclopentane 3.7208 cis-2-Hexene 3.8765
1,3,5-Trimethylbenzene 1.1076
ctc-1,2,4-Trimethylcyclopentane 1.6467 1-Heptene 7.6134
1-Methyl-2-ethylbenzene 2.2611
trans-1,4-Dimethylcyclohexane 3.6499 trans-3-Heptene 3.3469
1,2,4-Trimethylbenzene 2.2535
1-Ethyl-1-methylcyclopentane 1.0554 cis-3-Heptene 5.8657
tert-Butylbenzene 4.5310
trans-1,2-Dimethylcyclohexane 1.6537 trans-2-Heptene 3.7217
Isobutylbenzene 4.4216
ccc-1,2,3-Trimethylcyclopentane 0.7971 cis-2-Heptene 5.7679
sec-Butylbenzene 2.2368
Isopropylcyclopentane 3.5042 1-Octene 7.6901
1-Methyl-3-isopropylbenzene 1.1066
cis-1,2-Dimethylcyclohexane 3.7159 trans-2-Octene 1.9432
1-Methyl-4-isopropylbenzene 1.0668
n-Propylcyclopentane 3.6438 cis-2-Octene 3.9502
1-Methyl-2-isopropylbenzene 1.1241
ccc-1,3,5-Trimethylcyclohexane 3.5263 1-Nonene 7.6425
1-Methyl-3-n-propylbenzene 2.1135
1,1,4-Trimethylcyclohexane 3.6791 trans-3-Nonene 1.9972
1-Methyl-4-n-propylbenzene 2.2336
ctt-1,2,4-Trimethylcyclohexane 3.6107 cis-3-Nonene 4.0042
n-Butylbenzene 2.2087
ctc-1,2,4-Trimethylcyclohexane 3.5069 trans-2-Nonene 1.9848
1,2-Diethylbenzene 1.0947
1,1,2-Trimethylcyclohexane 3.3354 cis-2-Nonene 2.7952
1-Methyl-2-n-propylbenzene 2.2641
Isobutylcyclopentane 3.7123 1-Decene 8.2053
1,4-Dimethyl-2-ethylbenzene 2.2803
Isopropylcyclohexane 5.7233
1,3-Dimethyl-5-ethylbenzene 2.2858
n-Butylcyclopentane 3.6944
1,2-Dimethyl-4-ethylbenzene 2.2558
Isobutylcyclohexane 5.6729 Production Note
1,3-Dimethyl-2-ethylbenzene 1.1416
t-1-Methyl-2-propylcyclohexane 3.8434 AccuStandard may add and/or subtract
1,2-Dimethyl-3-ethylbenzene 2.1864
t-1-Methyl-2-(4MP)cyclopentane 3.7534
1,2,4,5-Tetramethylbenzene 0.2360 PIANO Analytes and vary the weight %
2-Methylbutylbenzene 1.1453 for each Analyte. The certificate will
trans-1-Butyl-2-methylbenzene 0.7641 PIANO Mixture reflect the exact Analyte composition.
n-Pentylbenzene 4.4828
ASTM-P-0030 $ 250 / 100 µL (135 comps.)
t-1-Butyl,3,5-dimethylbenzene 2.1641
The PIANO formulation contains the n-Paraffins, Isoparaffins,Aromatics, Naphthenes, and Olefins from
t-1-butyl-ethylbenzene 2.2322
1,3,5-Triethylbenzene 4.5671 the Five Cat. No.’s: ASTM-P-0031, ASTM-P-0032, ASTM-P-0033, ASTM-P-0034, ASTM-P-0035
1,2,4-Triethylbenzene 1.1087 Approximate weight %’s for the total: n-Paraffins 18.5%, Isoparaffins 17.9%, Aromatics 23.6%,
n-Hexylbenzene 4.5029 Naphthenes 20.9%, Olefins 19.0%. The certificate lists the weight % for all analytes in the formulation.
Technical Note
Fuel Oil Degradation/Retention
AccuStandard offers a hydrocarbon window defining standard with the C8 to C40 odd and
Time Mix for Quantification of even Alkanes. As an added benefit, AccuStandard included pristane and phytane in the
C17/Pristane & C18/Phytane ratios formulation. Use of this one standard measuring the C17/ pristane and C18/ phytane ratio
DRH-005S-10X $ 20 / 1 x 1 mL can be used to estimate degradation of fuel oil.
2.0 mg/mL each in CH2Cl2 : CS2 (1:1) 4 comps.
If you prefer, AccuStandard has also developed a fuel oil degradation mixture containing
Heptadecane just the four required analytes to determine the C17/pristane and C8/ phytane ratio
Octadecane Catalog Numbers DRH-005S-10X.
Phytane (2,6,10,14-Tetramethylhexadecane)
Pristane (2,6,10,14-Tetramethylpentadecane)
NEW NEW
Calibration Solution * Calibration Solution *
DRH-002S-R1 $ 50 / 1 x 1 mL DRH-002S-R2 $ 50 / 1 x 1 gm
DRH-002S-R1-PAK SAVE 20% $ 200 / 5 x 1 mL DRH-002S-R2-PAK SAVE 20% $ 200 / 5 x 1 gm
At stated conc. in Chloroform 17 comps. 1 % Wt./Wt. each in Chloroform 20 comps.
14 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Petrochemical Standards Method SIM DIS
Member
Simulated Distillation (SIM DIS) and Proposed Motor Oil Volatility Method
AccuStandard has developed an extensive line of SIM DIS standards for normal and high temperature analytical requirements when generating
boiling point versus retention time calibration curves. Since normal paraffins above Alkane C60 are not readily available, Polywax 500, Polywax
655, Polywax 850 and Polywax 1000 standards have been incorporated to perform SIM DIS analysis of heavy petroleum fractions with boiling
points up to 1350 °F. If you require additional analytes added to the formulations for extended SIM DIS work, use our custom quotation request
ASTM
form located in the back of the catalog.
,
3230
3231
ASTM Standards
Member 3237
ASTM D-3120 & D-3246 Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
Sulfur Calibration Set Originally designed for
D-3120-96
D-3120-92-CAL-SET $ 75 / set of 8 x 1 mL
D-3246-96
Standards of Interests
In Isooctane
ASTM
16 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 3246
3340
3524
Member 3605
ASTM
ASTM D-3340 Lithium & Na in Lubricating Greases by Flame Photometer
AccuStandard AccuTrace brand AA standards are produced under our rigorous ISO 9001 quality system to
exacting specifications. Each standard is prepared from high purity starting materials; deionized water and
high purity acids. Every standard is instrumentally assayed to verify 1000 ppm concentration of specified
element; Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease of
record keeping and availability at audits. Originally designed for
D-3340-98
Element Unit Cat. No. Price
Matrix 1,000 µg/mL Technical Note
Lithium * 100 mL AA30H-1 $ 12 * For your convenience these elements are
HCl 500 mL AA30H-5 30 also available in HNO3. To order HNO3
WEAR METALS
Sodium * 100 mL AA54H-1 13 change the H to N at the end of the Cat. No.
HCl 500 mL AA54H-5 33
ASTM D-3524 (Reapproved 1999) Diesel Fuel Diluent in Used Diesel Engine Oils by GC
Test to
D-3524 Calibration Curve Originally designed for Low ppb
D-3524-CAL-SET-5ML $ 150 / set of 6 x 5 mL D-3524-90
D-3524-CAL-SET-10ML $ 250 / set of 6 x 10 mL Sulfur
Analyte Standard 1 Standard 2 Standard 3 Standard 4 Standard 5 Standard 6 See Pages 6-11
Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. %
,
3610 ASTM Standards
Member
uidelin
Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % EPA G FG
for R
is
Benzene 0.06 - 5.0 5.00 2.50 1.25 0.67 0.33 0.12 0.06 Analys
Toluene 0.5 - 20 20.00 15.00 10.00 5.00 2.50 1.00 0.50
Isooctane 75.00 82.50 88.75 94.33 97.17 98.88 99.44
Aromatics Quantitative Calibration Standard (w/ Internal Standard: sec Butanol) Technical Note
D-3606/IS2-SET $ 115 / set of 7 x 1 mL Due to changes in the possible
D-3606/IS2-SET-PAK $ 500 / 5 x (7 x 1) mL
use of other oxygenates like
Analyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7 ethanol added to gasoline,
Calibr. range Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % AccuStandard formulated a
new calibration curve using
Benzene 0.06 - 5.0 4.8 2.4 1.2 0.6432 0.3168 0.1152 0.0576 sec-butanol as an Internal
Toluene 0.5 - 20 19.2 14.4 9.6 4.8000 2.4000 0.9600 0.4800 Standard. The use of this new
Isooctane 72.0 79.2 85.2 90.5568 93.2832 94.9248 95.4624 ISTD minimizes coelution
sec Butanol (Internal Standard) 4.0 4.0 4.0 4.0 4.0 4.0 4.0
caused by the oxygenate(s)
and pre column - standard
Gasoline Refinery Quality Control Standards column configuration in the GC
system.
Daily Quality Control Standard Daily Quality Control Standard
(with Internal Standard: sec Butanol) (without Internal Standard)
D-3606-QC-IS2-25ML $ 125 / 1 x 25 mL D-3606-QC-25ML $ 125 / 1 x 25 mL
D-3606-QC-IS2-25ML-PAK $ 600 / 5 x 25 mL D-3606-QC-25ML-PAK $ 600 / 5 x 25 mL
Each at stated quantities 4 comps. Each at stated quantities 3 comps.
Compound Target Vol. % Compound Target Vol. %
Benzene 0.6432 Benzene 0.67
Toluene 4.8000 Toluene 5.00
Isooctane 90.5568 Isooctane 94.33
sec-Butanol (ISTD) 4.0
100
100
18 Quality System is Certified to comply with the International ISO 9001 Quality Standard
On-Line Ordering
There is an easier way to get Chemical Reference Standards
®
e-Standards from AccuStandard.com
ASTM
5 Ways to Search
“e-Standards” is the Fastest, Most Comprehensive Search Engine
available and contains over 30,000 products.
Search by:
Catalog Number
Single or Multiple Components,
Method (EPA, ASTM, etc.)
Chemical Category (Organic, Inorganic, Petroleum, etc.)
Other Companies’ Part Number
Log on to www.accustandard.com and see how easy it is.
Test to
Low ppb
Sulfur
See Pages 6-11
,
3798
3831
ASTM Standards
Member
ASTM D-3710 (Reapproved 1999) Boiling Range Distribution of Gasoline & Gasoline Fractions by GC
Originally designed for
This SIM DIS (Simulated Distillation or GCD) Method is used to determine the boiling range distribution of D-3710-95
gasoline and gasoline components. ASTM Method D-3710 is used for petroleum products and fractions
with a final boiling point of 500°F (260°C) or lower. By having an insight into the composition of the
ASTM
gasoline blend, essential data for the calculation of vapor pressure and a prediction of the D-86 distillation
curve can be made.
Standards of Interests
Qualitative Calibration Standard Quantitative Calibration Standard See page 3 for AccuStandard’s
D-3710-QUAL $ 30 / 1 x 1 mL ASTM-D3710 $ 25 / 1 x 1 mL new D-86 QA/QC Standards.
D-3710-QUAL-PAK SAVE 20% $ 120 / 5 x 1 mL ASTM-D3710-PAK SAVE 36% $ 80 / 5 x 1 mL
19 comps. 16 comps.
Approx. Approx. Vol./Vol. % n-Octane 5.8
Wt./ Wt. % Wt./ Wt. % n-Butylbenzene 3.5 n-Pentadecane 2.3
n-Butane 4.5 n-Octane 5.4 n-Decane 3.5 n-Pentane 8.1
n-Butylbenzene 3.2 n-Pentadecane 2.2 2,4-Dimethylpentane 5.8 n-Propylbenzene 4.7
n-Decane 3.2 n-Pentane 7.6 n-Dodecane 3.5 n-Tetradecane 2.3
2,4-Dimethylpentane 5.4 n-Propane 1.5 n-Heptane 10.5 Toluene 11.6
n-Dodecane 3.2 n-Propylbenzene 4.3 n-Hexane 5.8 n-Tridecane 2.3
n-Heptane 9.7 n-Tetradecane 2.2 2-Methylbutane 10.5 p-Xylene 14.0
n-Hexane 5.4 Toluene 10.8 2-Methylpentane 5.8
2-Methylbutane 9.7 n-Tridecane 2.2 Vol./Vol. %
2-Methylpentane 5.4 p-Xylene 13
2-Methylpropane 1.5
NEW
ASTM D-2887-99 Boiling Range Distribution of Petroleum Fractions by GC
Calibration Solution *
DRH-002S-R1 $ 50 / 1 x 1 mL
DRH-002S-R1-PAK SAVE 20% $ 200 / 5 x 1 mL
At stated conc. in Chloroform 17 comps.
µg/mL µg/mL µg/mL µg/mL
n-Hexane 600 n-Undecane 1200 n-Octadecane 500 n-Dotriacontane 100
n-Heptane 600 n-Dodecane 1200 n-Eicosane 200 n-Hexatriacontane 100
n-Octane 800 n-Tetradecane 1200 n-Tetracosane 200 n-Tetracontane 100
n-Nonane 800 n-Hexadecane 1000 n-Octacosane 100 n-Tetratetracontane100
n-Decane 1200
* Can be shipped by Air and Sea
20 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 4059
4291
4294
Member 4377
ASTM
Aroclor # Cat. No. PAK Cat. No.
ASTM D-4291 (Reapproved 1998) Trace Ethylene Glycol in Used Engine Oil
Ethylene Glycol Stock Standard Originally designed for
D-4291-93 $ 20 / 1 x 1 mL D-4291-93
D-4291-93-PAK SAVE 20% $ 80 / 5 x 1 mL
,
4628 ASTM Standards
Member
ASTM D-4628 Barium, Calcium, Magnesium & Zinc in Unused Lubricating Oil
Lubricating Oil, Elements (Nominal Value) Wt.% listed below Originally designed for Standards of Interests
ASTM-P-0113-SET $ 2850 / 17 x 100 mL D-4628-97 See Table of Contents for the
Ba Ca Mg P S Zn Wear Metals Group pages.
Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0113-01 0.025 0.600 0.100 0.005 0.175 0.060
ASTM-P-0113-02 0.000 0.500 0.150 0.200 0.050 0.080
ASTM-P-0113-03 0.100 0.400 0.350 0.150 0.300 0.180
ASTM-P-0113-04 0.175 0.260 0.225 0.250 0.150 0.120
ASTM-P-0113-05 0.150 0.005 0.450 0.005 0.450 0.070
ASTM-P-0113-06 0.000 0.400 0.500 0.025 0.350 0.100
ASTM-P-0113-07 0.100 0.300 0.325 0.060 0.250 0.120
ASTM-P-0113-08 0.200 0.200 0.250 0.100 0.450 0.100
ASTM-P-0113-09 0.050 0.060 0.100 0.080 0.300 0.130
ASTM-P-0113-10 0.075 0.060 0.400 0.050 0.200 0.050
ASTM-P-0113-11 0.010 0.050 0.300 0.120 0.100 0.075
ASTM-P-0113-12 0.000 0.025 0.200 0.150 0.200 0.130
ASTM-P-0113-13 0.175 0.005 0.375 0.200 0.400 0.150
ASTM-P-0113-14 0.005 0.170 0.175 0.250 0.550 0.110
ASTM-P-0113-15 0.000 0.100 0.425 0.100 0.200 0.200
ASTM-P-0113-16 0.005 0.010 0.275 0.010 0.600 0.250
ASTM-P-0113-17 0.000 0.000 0.000 0.000 0.000 0.000
22 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 4629
Member
ASTM D-4629 Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Originally designed for
Combustion and Chemiluminescence Detection. IP Designation 379/88 D-4629-96
Method D-4629 is used to determine trace total nitrogen naturally found in liquid hydrocarbons boiling from
ASTM
50 to 400°C with viscosities between 0.2 and 10 cSt. This method monitors feed stocks for nitrogen to
prevent the poisoning of some process catalysts when trace nitrogenous materials are present.
,
ASTM Standards
Member
Custom Formulations
AccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a custom formulation.
Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. To make an inquiry for Custom
Quotes visit our website.
You can also Email your requirements to techservice@accustandard.com or Fax us at 203-786-5287. Please include the following information:
List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (milliliters per ampule, bottle, or vial).
Quality Control Options
1. Gravimetric/Volumetric Certification: Each standard is measured gravimetrically and then QC’ed instrumentally (where available). Every
component in the standard is guaranteed to be within ±0.5% of the requested value unless otherwise stated. The solutions are made up to volume
using class A glassware. A certificate comes with each standard and documents the gravimetric values used.
2. Quantitative Validation: Full QA/QC method includes extended GC analysis using both internal and calibration standards plus statistical
analysis. A data package is provided containing analytical and gravimetric data (Organic customs only).
Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.
24 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 4927
4928
4929
Member
ASTM
D-4927-96 See Table of Contents for the
ASTM-P-0110-SET $ 2300 / 17 x 100 mL
Wear Metals Group pages
Ba Ca P S Zn
Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0110-01 0.100 0.600 0.005 0.175 0.060
ASTM-P-0110-02 0.175 0.500 0.200 0.050 0.080
ASTM-P-0110-03 0.000 0.400 0.150 0.300 0.180
ASTM-P-0110-04 0.025 0.260 0.250 0.150 0.120
ASTM-P-0110-05 0.150 0.005 0.005 0.450 0.070
ASTM-P-0110-06 0.000 0.400 0.025 0.350 0.100
ASTM-P-0110-07 0.200 0.300 0.060 0.250 0.120
ASTM-P-0110-08 0.000 0.200 0.100 0.450 0.100
ASTM-P-0110-09 0.100 0.060 0.080 0.300 0.130
ASTM-P-0110-10 0.050 0.060 0.050 0.200 0.050
ASTM-P-0110-11 0.075 0.050 0.120 0.100 0.075
ASTM-P-0110-12 0.010 0.025 0.150 0.200 0.130
ASTM-P-0110-13 0.005 0.005 0.200 0.400 0.150
WEAR METALS
ASTM-P-0110-14 0.000 0.170 0.250 0.550 0.110
ASTM-P-0110-15 0.000 0.100 0.100 0.200 0.200
ASTM-P-0110-16 0.005 0.010 0.010 0.600 0.250
ASTM-P-0110-17 0.000 0.000 0.000 0.000 0.000
ASTM D-4929 Organic Chloride Content in Crude Oil - Test Method B Originally designed for
D-4929-99
Combustion and Microcoulometry
Standards of Interests
Working Level Chlorine Standard Stock Chlorine Standard
D-4929-94 $ 10 / 1 x 5 mL D-4929-94-100X $ 15 / 1 x 5 mL See page 66 for additional
D-4929-94-PAK SAVE 20% $ 40 / 5 x 5 mL D-4929-94-100X-PAK SAVE 20% $ 60 / 5 x 5 mL proposed and promulgated
Chlorine in Lube Oil standards
Chlorine @ 10 µg/mL in Isooctane Chlorine @ 1000 µg/mL in Isooctane
,
5056 ASTM Standards
Member
Nickel 100 mL AA37N-1 12 * For your convenience these elements are available
HNO3 500 mL AA37N-5 30 in HCl. To order, change the N to H at the end of
the catalog numbers.
26 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5059
5134
Member
Technical Notes
9
D-505
AccuStandard has formulated the following standards to measure the lead content in gasoline for both Meets es
ASTM
uidelin
high and low concentrations using bismuth as an internal standard. For long term stability and ease of EPA G FG
for R
use AccuStandard provides the internal standard in two convenient packaging sizes. The bulk 4 oz. is
Analys
bottles are designed for laboratories analyzing many samples while the 10 mL ampules are for
laboratories that have limited requests for the test method. Should you require bulk quantities of the
internal standard conveniently packaged in single-use ampules, contact AccuStandard’s technical
department for a quotation. Bulk volumes of 250 mL or more can be sealed into ampules (your choice
up to 20 mL size). Use of our ampulling services can provide substantial saving for the Laboratory.
,
5185
5186
ASTM Standards
Member
ASTM D-5185 Additive Elements, Wear Metals, & Contaminants in Used Lubricating Oils by ICP-AES
Originally designed for
21 Wear Metal Multi-Element Standard Each Wear Metal Standard contains D-5185-97
Containing No Metallic Sulfonates the below list of 21 elements in
hydrocarbon oil at the stated
Conc. Cat. No. Price concentration
(µg/g) Standards of Interests
Ag (Silver) Mo (Molybdenum)
10 WM-21-NMS-1X-1 $ 160 Al (Aluminum) Na (Sodium) See Table of Contents for the
30 WM-21-NMS-3X-1 160 B (Boron) Ni (Nickel) Wear Metals Group pages
50 WM-21-NMS-5X-1 160 Ba (Barium) P (Phosphorus)
100 WM-21-NMS-10X-1 180 Ca (Calcium) Pb (Lead)
300 WM-21-NMS-30X-1 240 Cd (Cadmium) Si (Silicon)
500 WM-21-NMS-50X-1 350 Cr (Chromium) Sn (Tin)
Cu (Copper) Ti (Titanium)
WM-21-NMS-SET-1 $ 1050
Fe (Iron) V (Vanadium)
set of above 6 x 100 mL
Mg (Magnesium) Zn (Zinc)
Mn (Manganese) Technical Notes
This calibration curve has been
Recommended Internal Standard (IS)
formulated with starting
materials containing no metal
Sulfur free Organometallic (IS) Sulfur free Organometallic (IS)
sulfonates. So a sulfur
Element @ 1000 µg/g Price @ 5000 µg/g Price
Cat. No. 50 mL Cat. No. 50 mL calibration curve can easily be
developed using a high
Cobalt WM-NMS-14 $ 75 WM-NMS-14-5X $ 110 concentration sulfur standard.
ASTM D-5186 Aromatic Content & Polynuclear Aromatic Content of Originally designed for
D-5186-99
Diesel Fuels & Aviation Turbine Fuels by SFC
ISO 9001:2000
Certificate Number: 31692
28 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5188
5191 &
5482
Member 5307
ASTM
Cat. No. V/L Temp Price / Set
D-5188-99
ASTM-P-125-01-VAP 36.1˚C (96.9˚F) $ 45 / 5 x 20 mL
ASTM-P-125-02-VAP 68.0˚C (155.7˚F) 45 / 5 x 20 mL
The ASTM Committee D-02 on Petroleum Products and Lubricants has issued the Standard Method
D-5441-98 for the determination of the purity of methyl tert-butyl ether (MtBE) by Gas Chromatography.
This method provides a procedure to measure impurities in MtBE such as C4 to C12 olefins, methyl,
ASTM
isopropyl and tert-butyl alcohols, methyl sec-butyl & methyl tert-amyl ethers, acetone, and methyl ethyl
ketones. The presence of these impurities in MtBE can have a direct effect upon the value of the MtBE as
a gasoline additive. AccuStandard has formulated the following reference standards to meet the method
specifications. Different packaging sizes are available to meet various sample testing capacities .
trans-2-Pentene cis-Pentene
tert-Butanol
30 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5442
5443
5453
Member
ASTM
D-5442-CR-PAK $ 40 / 5 x 1 mL
Wt./Wt. % Wt./Wt. % Wt./Wt. % At stated Wt. % in Cyclohexane calibration standards for
n-Dodecane 0.02 n-Tetracosane 0.10 n-Hexatriacontane 0.06 2 comps. hydrocarbon analysis or page 15
n-Tetradecane 0.03 n-Hexacosane 0.12 n-Tetracontane 0.05 for new proposed methods.
n-Hexadecane 0.04 n-Octacosane 0.12 n-Tetratetracontane 0.04 Wt./Wt. %
n-Octadecane 0.05 n-Triacontane 0.10 n-Pentacontane 0.03 n-Eicosane 0.05
n-Eicosane 0.06 n-Dotriacontane 0.08 n-Hexacontane 0.02 n-Tetracontane 0.05
n-Docosane 0.08
NEW
NEW Retention Time Standard Mix 2
Retention Time Standard Mix 1
D-5442-RT1 $ 50 / 500 mg D-5442-RT2 $ 55 / 500 mg
Equal parts by weight 12 comps. Equal parts by weight 16 comps.
n-Dodecane (c12) n-Octacosane (c28)
n-Hexadecane (c16) n-Octacosane (c28)
n-Tetradecane (c14) n-Triacontane (c30)
n-Octadecane (c18) n-Triacontane (c30)
n-Hexadecane (c16) n-Dotriacontane (c32)
n-Eicosane (c20) n-Dotriacontane (c32)
n-Octadecane (c18) n-Hexatriacontane (c36)
n-Docosane(c22) n-Hexatriacontane (c36)
n-Eicosane (c20) n-Tetracontane (c40)
n-Tetracosane (c24) n-Tetracontane (c40)
n-Docosane (c22) n-Tetratetracontane (c44)
n-Hexacosane (c26) n-Tetratetracontane (c44)
n-Tetracosane (c24) n-Pentacontane (c50)
n-Hexacosane (c26) n-Hexacontane (c60)
ASTM D-5443 Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Originally designed for
D-5443-93
(Reapproved 1998) Petroleum Distillates through 200°C by Multi-dimensional GC
Hydrocarbon Test Mixture
D-5443-93-HTM $ 100 / 1 x 1 mL
At stated Wt. % 28 comps.
Wt./Wt. % Wt./Wt. % Wt./Wt. %
Cyclopentane 1.00 1cis,2-Dimethylcyclohexane 5.00 trans-Decahydronaphthelene 4.25
n-Pentane 1.00 Isooctane 5.00 n-Tetradecane 4.50
Standards of Interests
Cyclohexane 2.00 n-Octane 5.00 Ethylbenzene 4.50 See pages 6-11 for a
2,3-Dimethylbutane 2.00 1cis,2 cis,4-Trimethylcyclohexane 4.25 o-Xylene 4.25 comprehensive line of Certified
n-Hexane 2.00 n-Nonane 4.50 n-Propylbenzene 5.00 Sulfur Calibration Standards,
n-Hexene 1.50 n-Decane 4.25 1,2,4-Trimethylbenzene 4.50
n-Undecane 3.50 1,2,3-Trimethylbenzene 5.00
Petrocheck, & Petrotest quality
Methylcyclohexane 4.25
4-Methyl-1-hexene 1.50 n-Dodecane 3.25 1,2,4,5-Tetramethylbenzene 5.00 control products, pages 1-2.
n-Heptane 3.50 Benzene 2.25 Pentamethylbenzene 5.00
Toluene 2.25
Technical Note
ASTM D-5501 Ethanol Content of Denatured Fuel Ethanol by GC Additional Oxygenate calibration,
Originally designed for check standards, and
Denatured Fuel Ethanol Calibration Set D-5501-94 independent reference standards
D-5501-94-SET $ 75 / set of 7 x 1 mL can be found in ASTM method
Cat. No. Comp.1 Wt./ Wt.% Comp.2 Wt./ Wt.% Comp.3 Wt./ Wt.% Unit D-4815 (page 24) or D-5622-94
D-5501-94-01 Ethanol 92 Methanol 0.6 Heptane 7.4 1 x 1 mL (page 37). The required QA/QC
D-5501-94-02 Ethanol 93 Methanol 0.5 Heptane 6.5 1 x 1 mL procedures in EPA methods
D-5501-94-03 Ethanol 94 Methanol 0.4 Heptane 5.6 1 x 1 mL stipulate a calibration check
D-5501-94-04 Ethanol 95 Methanol 0.3 Heptane 4.7 1 x 1 mL
standard be used once per
D-5501-94-05 Ethanol 96 Methanol 0.2 Heptane 3.8 1 x 1 mL
D-5501-94-06 Ethanol 97 Methanol 0.1 Heptane 2.9 1 x 1 mL analytical batch or per 10 sample
D-5501-94-07 Ethanol 98 Methanol 0.05 Heptane 1.95 1 x 1 mL set. AccuStandard has bulk
packaged check standards to
meet this increased usage.
ASTM D-5580 Benzene, Toluene, Ethylbenzene, m/p-Xylene, o-Xylene, C9 and
Heavier Aromatics, & Total Aromatics in Finished Gasoline by GC Originally designed for
D-5580-00
Aromatics Quantitative Calibration Mixes (without Internal Standard)
D-5580-95-CAL-SET-10ML $ 300 / set of 5 x 10 mL of 6 component mix
Member
Valve Timing Calibration Mix Valve Timing Calibration Mix Technical Note
ASTM
(with Internal Standard) (without Internal Standard)
M-GRA-VT/IS-AS $ 25 / 1 x 1 mL
ASTM D-5580 Gasoline
M-GRA-VT-AS-10ML $ 100 / 1 x 10 mL
M-GRA-VT/IS-AS-PAK SAVE 20% $ 100 / 5 x 1 mL M-GRA-VT-AS-10ML-PAK SAVE 20% $ 400 / 5 x 10 mL Refinery Quality Control
Each at stated conc. 6 comps. Each at stated conc. 5 comps. Standard
Wt./Wt. % Wt./Wt. % AccuStandard was requested by
Benzene 4.5 Benzene 5.0 the Petrochemical Industry to
Toluene 4.5 Toluene 5.0 manufacture the following QA/QC
Ethylbenzene 9.0 Ethylbenzene 10.0 standards for ASTM Method
o-Xylene 9.0 o-Xylene 10.0
2-Hexanone (Internal Std.) 10.0
D-5580. The configuration of your
Isooctane 70.0
Isooctane 63.0 instrument valve time switching and
the pre-column incorporated
Selectivity Check Standard determines which QA/QC standard
Internal Standard M-GRA-SCS-AS $ 10 / 1 x 1 mL provides optimum performance
M-GRA-IS-AS-5ML $ 10 / 1 x 5 mL M-GRA-SCS-AS-PAK SAVE 20% $ 40 / 5 x 1 mL when analyzing gasolines samples
M-GRA-IS-AS-5ML-PAK SAVE 20% $ 40 / 5 x 5 mL Each at stated conc. 2 comps.
by Method D-5580. Use of the
Wt./Wt. % D-5580 standards in conjunction
2-Hexanone (Neat) n-Dodecane 1.5
with the real world gasoline
Isooctane 98.5
AccuPetroTest & AccuPetroCheck
Consensus Value Reference
Daily Quality Control Standard Daily Quality Control Standard Material (see pages 1-2) can
provide added assurance that the
without Internal Standard without Internal Standard analytical results being generated
D-5580-QC-R1 $ 125 / 1 x 10 mL D-5580-QC $ 125 / 1 x 10 mL
D-5580-QC-R1-PAK SAVE 20% $ 500 / 5 x 10 mL D-5580-QC-PAK $ 500 / 5 x 10 mL
by the laboratory are reproducible
14 comps. 14 comps. and the analytical system is
performing to method specifications.
Wt./Wt. % Wt./Wt. % Wt./Wt. % Wt./Wt. %
n-Hexane 12 Toluene 9 n-Hexane 12 Toluene 9
n-Heptane 20 Ethylbenzene 2 n-Heptane 20 Ethylbenzene 2
n-Octane 15 p-Xylene 3 n-Octane 15 p-Xylene 3
n-Decane 10 o-Xylene 2 n-Decane 10 o-Xylene 2
n-Dodecane 1 1,2,4-Trimethylbenzene 3 n-Triadecane 1 1,2,4-Trimethylbenzene 3
Isooctane 20 1,2,4,5-Tetramethylbenzene 1 Isooctane 20 1,2,4,5-Tetramethylbenzene 1
Benzene 1 Naphthalene 1 Benzene 1 Naphthalene 1
Weights and weight percents provided Ease of use in performing back calculations.
All necessary solutions included Provides single source for sample analysis.
7 stds. used to generate 5 point curve Generate a 5 point curve in 30% less time than competitors' 10 standard set.
34 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5599
Member
Continued Meets es
uidelin
EPA G FG
for R
is
ASTM/EPA Oxygenate Quality Control Standards Analys
ASTM
Daily Quality Control Standard Revised Daily Quality Control Standard
(without Internal Standard) (without Internal Standard) Technical Note
M-GRO-QC-10ML $ 100 / 1 x 10 mL M-GRO-QC-R-10ML $ 100 / 1 x 10 mL
M-GRO-QC-10ML-PAK SAVE 20% $ 400 / 5 x 10 mL The Daily Quality Control
M-GRO-QC-R-10ML-PAK SAVE 20% $ 400 / 5 x 10 mL
Standard M-GRO-QC-R was
Compound Target Compound Target Compound Target Compound Target
Oxygenate Wt. % Oxygenate Wt. % Oxygenate Wt. % Oxygenate Wt. %
developed in response to your
requests for a QC mix
Methanol 1 iso-Butanol 1 Methanol 1 iso-Butanol 1
Ethanol 1 EtBE 3 Ethanol 1 EtBE 3 bracketed by the Calibration
Isopropanol 1 t-Pentanol 1 Isopropanol 1 t-Pentanol 1 Curve.
t-Butanol 1 Butanol 1 t-Butanol 1 Butanol 1
Propanol 1 TAME 3 Propanol 1 TAME 3 AccuStandard reduced the
MtBE 3 MtBE 3 diisopropyl ether content from 3
sec-Butanol 1 RFA Gasoline 79 sec-Butanol 1 RFA Gasoline 81 Wt. % to 1 Wt. % to meet the
Di-isopropyl ether 3 Di-isopropyl ether 1 method specifications.
14 comps. 100 14 comps. 100
Daily Quality Control Standard Revised Daily Quality Control Standard Technical Note
(with Internal Standard) (with Internal Standard) Additional Oxygenate calibration,
M-GRO-QC/IS-5ML $ 75 / 1 x 5 mL M-GRO-QC-R/IS-5ML $ 75 / 1 x 5 mL check standards, and
M-GRO-QC/IS-5ML-PAK SAVE 27% $ 275 / 5 x 5 mL M-GRO-QC-R/IS-5ML-PAK SAVE 27% $ 275 / 5 x 5 mL independent reference standards
Compound Target Compound Target Compound Target Compound Target can be found in ASTM method
Oxygenate Wt. % Oxygenate Wt. % Oxygenate Wt. % Oxygenate Wt. % D-4815 (page 24) or D-5622
Methanol 1 Di-isopropyl ether 3 Methanol 1 Di-isopropyl ether 1 (page 37). The required QA/QC
Ethanol 1 iso-Butanol 1 Ethanol 1 iso-Butanol 1 procedures in EPA methods
Isopropanol 1 EtBE 3 Isopropanol 1 EtBE 3 stipulate a calibration check
t-Butanol 1 t-Pentanol 1 t-Butanol 1 t-Pentanol 1
standard be used once per
Propanol 1 Butanol 1 Propanol 1 Butanol 1
MtBE 3 TAME 3 MtBE 3 TAME 3 analytical batch or per 10 sample
sec-Butanol 1 sec-Butanol 1 set. AccuStandard has bulk
RFA Gasoline 79 RFA Gasoline 81 packaged check standards to
meet this increased usage.
1,2-Dimethoxyethane (ISTD) is combined with 100 1,2-Dimethoxyethane (ISTD) is combined with 100
the above 14 comps. in a 4 to 100 weight ratio the above 14 comps. in a 4 to 100 weight ratio
15 comps. 15 comps.
Internal Standard
M-GRO-IS-5ML $ 10 / 1 x 10 mL
M-GRO-IS-5ML-PAK SAVE 20% $ 40 / 5 x 10 mL
1,2-Dimethoxyethane (ISTD)
36 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5600
5622
Member
ASTM
Aluminum Magnesium Sodium
ASTM Method D-5600. We have
20% HCl in ASTM Type II water
Barium Manganese Titanium prepared numerous Ready-to-
Calcium Nickel Vanadium Aspirate ICP multi-element
Iron Silicon Zinc solutions. Should your company
Lithium Borate Diluent want to eliminate the preparation
D-5600-LIB-1 $ 125 / 1 x 100 mL
Standards of Interest D-5600-LIB-5 $ 180 / 1 x 500 mL
process for Inorganic standards
contact our Technical Department
Individual ICP Standards are on pages 67-72. for a quote on a Ready-to-
2.0% Lithium Borate in 10% HCl
Aspirate working level Inorganic
standard.
ASTM D-5622 Total Oxygen in Gasoline & MeOH Fuels by Reductive Pyrolysis Originally designed for
D-5622-95
Oxygenate Unit
Cat. No. Description (2 x 10 mL, plus an RFA gasoline blank) Wt. % Price
ASTM-P-0061-SET * Ethanol in Oxygenate free RFA gasoline 5.0 3 x 10 mL $ 50
ASTM-P-0062-SET * Ethanol in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50
ASTM-P-0063-SET * t-Amyl methyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50 Technical Note
ASTM-P-0064-SET * t-Amyl methyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50 AccuStandard’s Oxygenate
ASTM-P-0065-SET * Ethyl t-butyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50 reference fuel line was
ASTM-P-0066-SET * Ethyl t-butyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50
ASTM-P-0067-SET * Methyl t-butyl ether in Oxygenate free RFA gasoline 10.0 3 x 10 mL 50
designed as a cost effective
ASTM-P-0068-SET * Methyl t-butyl ether in Oxygenate free RFA gasoline 15.0 3 x 10 mL 50 alternative for Petrochemical
ASTM-P-0069-SET * Methanol & t-Butanol in Oxygenate free RFA gasoline 10.0 & 5.0 3 x 10 mL 50 Laboratories. All oxygenate
blends come with a certificate
to maintain traceability links to
* Each Set includes M-GRO-BLNK-10ML Technical Note NIST SRMs (when available).
Oxygenate Free Gasoline Refinery Blank By packaging the standard in
Use M-GRO-BLNK-10ML as an
M-GRO-BLNK-10ML $ 10 / 1 x 10 mL 10 mL sealed ampules your
oxygenate free RFA gasoline matrix to
laboratory will realize cost
make up your own oxygenate standards
RFA Gasoline (neat) savings. The 10 mL size
or call our Technical Dept. to have a
avoids having special
Standard custom made for you.
Standards of Interests packaging and hazardous
material fees billed to your
See ASTM Methods D-4815 (page 24) and D-5599
invoice.
(pages 34-36) for additional oxygenate calibration
standards.
We can reduce your costs by using the Cozzoli Auto Filling/Sealing Machine to
package just the right size product for your application.
38 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5599
Member
ASTM
ASTM-P-0102-SET $ 1850 / 100 mL Mineral Oil
Sulfur Iron Nickel Vanadium D-5708-A-10X $ 150 / 4 oz.
Cat. No. Conc. Conc. Conc. Conc. Price 100 µg/g in 20 cSt mineral oil
(Wt. %) (µg/g) (µg/g) (µg/g) 100 mL 3 comps.
ASTM-P-0102-01 0.00 0 0 0 $ 200 Iron
ASTM-P-0102-02 0.50 300 10 500 200 Nickel
ASTM-P-0102-03 1.00 500 100 25 200 Vanadium
ASTM-P-0102-04 - 100 80 250 200
ASTM-P-0102-05 2.00 200 40 100 200
ASTM-P-0102-06 2.50 400 5 400 200 Standards of Interests For our complete line of
ASTM-P-0102-07 3.00 0 60 300 200 Inorganic Standards,
ASTM-P-0102-08 3.50 500 0 200 200 See Table of Contents for
ASTM-P-0102-09 - 100 100 0 200 the Wear Metals Group request a copy of our
ASTM-P-0102-10 4.50 300 50 250 200 pages. Inorganics Catalog
ASTM-P-0102-11 5.00 200 20 500 200
ASTM-P-0102-12 5.50 50 100 50 200
WEAR METALS
Sulfur and Metals in Residual Fuel Oil
ASTM-P-0103-SET $ 2100 / 100 mL
Sulfur Iron Nickel Vanadium
Cat. No. Conc. Conc. Conc. Conc. Price
(Wt. %) (µg/g) (µg/g) (µg/g) 100 mL
ASTM-P-0103-01 0.00 0 0 0 $ 200
ASTM-P-0103-02 0.50 300 10 500 200
ASTM-P-0103-03 1.00 500 100 25 200
ASTM-P-0103-04 - 100 80 250 200
ASTM-P-0103-05 2.00 200 40 100 200
ASTM-P-0103-06 2.50 400 5 400 200
ASTM-P-0103-07 3.00 0 60 300 200
ASTM-P-0103-08 3.50 500 0 200 200
ASTM-P-0103-09 - 100 100 0 200
ASTM-P-0103-10 4.50 300 50 250 200
ASTM-P-0103-11 5.00 200 20 500 200
ASTM-P-0103-12 5.50 50 100 50 200
AccuPetroCheck QC Standards
QC Standards Two of the fuels are available as AccuPetroCheck
Consensus Value QC Standards. The
CARB Low Sulfur RFG QC Conventional Gasoline QC AccuPetroCheck CARB and Conventional
Standard Standard gasoline reference materials have all parameters
ASTM-FUEL-QCS-01-PAK $ 60 / 5 x 15 mL ASTM-FUEL-QCS-02-PAK $ 60 / 5 x 15 mL
listed on the certificate with the Consensus Values
Parameter Method Value Conc. Parameter Method Value Conc.
Total Aromatics D-1319 24.5 Vol.% Total Aromatics D-1319 34.6 Vol.%
and the regression equations for reproducability.
Total Olefins D-1319 5.3 Vol.% Total Olefins D-1319 12.4 Vol.% Use of these Reference Materials improve the
Total Saturates D-1319 58.3 Vol.% Total Saturates D-1319 62.8 Vol.% quality of laboratory results. The Consensus
Sulfur D-2622 0.0057 Wt.% Sulfur D-2622 0.0338 Wt.% Values listed reflect initial statistical treatment of
Sulfur D-4294 0.0078 Wt.% Sulfur D-4294 0.0368 Wt.%
Sulfur D-5453 55.76 µg/g Sulfur D-5453 317.36 µg/g the data at the time the catalog was published.
Sulfur D-6344 59.31 µg/g Sulfur D-6344 338.78 µg/g The actual certificate provided with the
Benzene D-5769 0.80 Vol.% Benzene D-5769 0.55 Vol.% AccuPetroCheck QC standard will have the
Toluene D-5769 4.92 Vol.% Toluene D-5769 5.53 Vol.%
Total Aromatics D-5769 23.42 Vol.% Total Aromatics D-5769 32.51 Vol.%
accepted Consensus Value based on statistical
Benzene D-6227 0.78 Vol.% Benzene D-6227 0.52 Vol.% treatment of the data.
Total Olefins D-6550 5.3 Vol.% Total Olefins D-6550 12.4 Vol.%
40 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Petrochemical Standards
Member
ASTM
Parameter Approx. Range SBPT-SWMO $ 25 / 2 x 15 mL
Sulfur 20 - 11000 mg/kg
Parameter Approx. Range amount of Sulfur. Use of these alternative
See ASTM Methods D-2622, D-3120, D-3246-92, Sulfur 20 - 11000 mg/kg matrix materials can provide further evaluation
D-4294, D-5453, for Sulfur Calibration Standards of the QA/QC process in the laboratory. Two
See ASTM Methods D-2622, D-3120,
D-3246-92, D-4294, D-5453 for Sulfur samples will be sent for the test parameter and
Calibration Standards
a separate sealed envelope containing the
gravimetrically prepared sulfur values is also
provided. The second sample is for
repeatability testing or for use as a future
AccuPetroTest Gasoline QA/QC reference.
All of your standards requirements for ASTM Method D-5769 have been put together in the
following 10 pages. These standards and methods are used in the monitoring of Total
Aromatics according to the latest methods and amendments to the US Clean Air Act.
A set of Amendments, containing more stringent specifications became effective January 1,
1995 limiting the volatility and composition of reformulated gasoline.
The D-02 Committee of the American Society of Testing Materials, developed a standard test
method D-5769 for the determination of the analyte composition by GC/MS of reformulated
gasoline.
Features: Benefits:
Purity and Identity of all analytes verified .......... Impurity interferences in analyte retention time
under identical operating conditions window are compensated.
Certified method specific calibration standards . Increased confidence in analytical results.
Eliminates preparation of calibration standards ..Time is utilized quantifying actual samples.
Internal Standards Incorporated .........................Saves time.
Weights and weight percents provided .............. Ease of use in performing back calculations.
Includes all necessary solutions .........................Complete single source for reference materials.
Variations in packaging size .............................. Meet laboratory sample volumes and demands.
Low Cost ............................................................ More economical to purchase than to prepare standards.
Flexibility ............................................................ Meet your lab requirements/method changes.
Only 5 standards needed for a 5 Point Curve ... Generate a full calibration curve in 1/2 the time of the
two set version composed of 10 standards.
No charge disk deliverable calibration curve .... Direct computer uploading eliminates the input of 135
weights (CALAMTS™) separate data points.
42 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5769
Member
Standards Designed for ASTM D-5769 as published in the 1997 Annual Book of ASTM Standards,
Vol. 05.03 Petroleum Products and Lubricants (III): D-4636-latest; Catalysts
The following M-GRA catalog numbers contain the necessary calibration curves, daily quality control, and
ASTM
internal standards designed to meet the promulgated GC/MS Aromatic method listed in the 1997 ASTM
Book of Standards.
AccuStandard offers two different versions of the M-GRA catalog numbers: M-GRA three component
internal standard version, and the M-GRA four component internal standard version.
The three component internal standard version contains the necessary deuterated analytes for full
qualitative and quantitative analysis of the 25 components listed in the published version.
The four component internal standard version was designed at the request of the petroleum refinery
laboratories. This four internal standard version incorporates not only the Benzene-d6, Ethyl benzene-d10,
Naphthalene-d8, but also Toluene-d8. Incorporating the Toluene-d8 as the internal standard for the
quantification of gasolines with higher Toluene levels has improved analytical results for this analyte.
Incorporation of a 6th Calibration Standard
A 6th calibration standard has been formulated for the M-GRA product line to improve the linearity at the
high end of the calibration curve see page 44. This sixth standard can be especially important in the
quantification of gasoline samples containing high toluene levels. The formulation contains an analyte
concentration between the high level standard and the next level, which is standard two. Use of the sixth
standard provides an additional calibration point that is desirable when the calibration curve is developed
using a quadratic fit.
44 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5769
Member
ASTM
M-GRA-CAL-R/IS-R-SET $ 425 / set of 5 x 1 mL Internal Standard Added
M-GRA-ADD/IS-R $ 100 / 1 x 1 mL
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Core Calibr. Mix Optional Std. 6
24 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. % 24 Comps. Target Wt. %
1,4-Diethyl benzene
Technical Note
Use with any M-GRA Calibration Curve.
The following D-5769 and M-GRA Standards were formulated to address proposed and promulgated
changes to ASTM Method D-5769-98 Aromatics by GC/MS. Many of these changes were evaluated and/
or adopted due to the results generated from the 1997 Round Robin, which used a select group of 21
ASTM
Modifications
A Sixth Standard was added to meet the latest D-5769 method requirements and provide improved
linearity at the high end of the Calibration curve
The Calibration Curve was packaged in two convenient sizes without the internal standard. This
packaging scheme allows for the addition of any ISTD formulation or oxygenate components.
The Quality Control Standard was reformulated in the latest D-5769 revision. The formulation
changes include reducing the 1,2,4,5-Tetramethylbenzene weight ratio and adding Naphthalene.
The Benzene Target Weight % has been increased to meet the latest D-5769 method requirements.
Disk Deliverable
Pentamethylbenzene has now been removed from the analyte list.
(At no additional charge)
Calibration Curve with No Internal Std. Added Optional Sixth Standard
D-5769-CAL-SET-5ML $ 1500 / Set of 5 x 5 mL D-5769-ADD-5ML $ 150 / 1 x 5 mL Eliminates hand keyed-in
D-5769-CAL-SET-10ML $ 2750 / Set of 5 x 10 mL D-5769-ADD-10ML $ 300 / 1 x 10 mL data.
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Core Calibration Mix Target
®
23 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. % 23 Comps. Wt. %
CALAMTS
Benzene 5.25 2.95 1.575 0.8144 0.4143 Benzene 4.16
Toluene 16.41
(Disk containing “Calibration
Toluene 19.67 11.06 5.898 3.0505 1.5519
Ethylbenzene 4.10 Amounts”)
Ethylbenzene 5.18 2.91 1.552 0.8026 0.4083
m-Xylene 6.19 3.48 1.856 0.9598 0.4883 m-Xylene 4.91
p-Xylene 6.19 3.48 1.856 0.9598 0.4883 p-Xylene 4.91 Each analyte in each
o-Xylene 6.30 3.54 1.890 0.9776 0.4973 o-Xylene 5.00
Isopropylbenzene 2.45
standard is individually
Isopropylbenzene 3.09 1.74 0.925 0.4786 0.2435
n-Propylbenzene 3.09 1.74 0.926 0.4787 0.2435 n-Propylbenzene 2.45 weighed. Actual weights
3-Ethyltoluene 3.10 1.74 0.928 0.4801 0.2442 3-Ethyltoluene 2.45 and weight percents are
4-Ethyltoluene 3.08 1.73 0.925 0.4782 0.2433 4-Ethyltoluene 2.44 provided.
1,3,5-Trimethylbenzene 3.10 1.74 0.929 0.4804 0.2444 1,3,5-Trimethylbenzene 2.46
2-Ethyltoluene 3.15 1.77 0.945 0.4890 0.2488 2-Ethyltoluene 2.50
1,2,4-Trimethylbenzene 5.23 2.94 1.567 0.8104 0.4123 1,2,4-Trimethylbenzene 4.14
1,2,3-Trimethylbenzene 3.20 1.80 0.960 0.4965 0.2526 1,2,3-Trimethylbenzene 2.54
Indan 3.45 1.94 1.034 0.5350 0.2722 Indan 2.73
1,4-Diethylbenzene 3.09 1.74 0.925 0.4786 0.2435 1,4-Diethylbenzene 2.45
n-Butylbenzene 3.08 1.73 0.923 0.4776 0.2430 n-Butylbenzene 2.44
1,2-Diethylbenzene 3.15 1.77 0.945 0.4885 0.2485 1,2-Diethylbenzene 2.50
1,2,4,5-Tetramethylbenzene 2.12 1.19 0.635 0.3284 0.1671 1,2,4,5-Tetramethylbenzene 1.68
1,2,3,5-Tetramethylbenzene 2.12 1.19 0.637 0.3295 0.1676 1,2,3,5-Tetramethylbenzene 1.68
Naphthalene 2.37 1.34 0.712 0.3683 0.1874 Naphthalene 1.88
1-Methylnaphthalene 2.37 1.34 0.712 0.3683 0.1874 1-Methylnaphthalene 1.88
2-Methylnaphthalene 2.43 1.37 0.730 0.3773 0.1919 2-Methylnaphthalene 1.93
Isooctane ----- 43.77 70.015 84.4922 92.1105 Isooctane 19.92
46 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5769
Member
ASTM
Internal Standard added
D-5769-ADD/IS $ 100 / 1 x 1 mL
D-5769-CAL/IS-SET $ 375 / 5 x 1 mL Test to
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Core Calibration Mix
24 Comps.
Target
Wt. %
Low ppb
24 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. %
Internal Standard Compound Mix ratio The 3 Comp. Internal Standard Mix (M-GRA-IS) is
M-GRA-IS Benzene-d6 2 mL combined with the 24 Comp. Core Calibration Curve Mixes
Ethylbenzene-d10 2 mL above in a 5 to 100 weight ratio to formulate these
Naphthalene-d8 1 gm 27 Comp. calibration solutions.
Toluene
Internal Standard Compound Mix ratio The 4 Comp. Internal Standard Mix (M-GRA-IS-R) is
Benzene-d6 2 mL combined with the 24 component core calibration
M-GRA-IS-R
Ethylbenzene-d10 2 mL
curve mixtures above in a 12 to 100 weight ratio to
Naphthalene-d8 1 gm
formulate these 28 component calibration solutions.
Toluene-d8 7 mL
48 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5769
Member
ASTM
D-5769-CAL/IS-R2-SET $ 375 / 5 x 1 mL
D-5769-ADD/IS-R2 $ 100 / 1 x 1 mL
Core Calibr. Mix Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Core Calibration Mix Target
24 Comps. Target Wt. % Wt. % Wt. % Wt. % Wt. % 24 Component Wt.%
Internal Standard Compound Mix ratio The 3 Comp. Internal Standard Mix (M-GRA-IS-R2) Each analyte in each
Chlorobenzene 2 mL is combined with the 24 Comp. Core Calibration standard is individually
M-GRA-IS-R2
1,2-Dichlorobenzene 2 mL
Curve mixtures above in a 5 to 100 weight ratio to weighed. Actual weights
1,2,4-Trichlorobenzene 1 mL
formulate these 27 Comp. calibration solutions. and weight percents are
provided.
Daily Quality Control Standard Sensitivity Test Solution
(with Internal Standard) M-GRA-ST $ 10 / 1 x 1 mL
D-5769-QC/IS-R2-5ML $ 100 / 1 x 5 mL M-GRA-ST-PAK SAVE 20% $ 40 / 5 x 1 mL
D-5769-QC/IS-R2-5ML-PAKSAVE 20% $400/5 x 5 mL 100 µg/mL in Isooctane
17 comps. Standards of Interest
Wt. Wt. 1,4-Diethyl benzene
For the mandatory real world
Compound Ratio Compound Ratio
QC samples stipulated in the
n-Hexane 12 Toluene 9
n-Heptane 17 Ethylbenzene 3 Fragmentation Pattern Standard Method, see pages 1-2.
n-Octane 17 m-Xylene 3 M-GRA-FP $ 20 / 1 x 1 mL
n-Decane 12 o-Xylene 3 M-GRA-FP-PAK SAVE 20% $ 80 / 5 x 1 mL
n-Dodecane 5 1,2,4-Trimethylbenzene 3 3.0 w/w in Isooctane
Isooctane 12 1,2,4,5-Tetramethylbenzene 2
1,2,3-Trimethylbenzene
Benzene 1 Naphthalene 1
M-GRA-QC-R-10ML $ 125 / 1 x 10 mL
M-GRA-QC-R-10ML-PAK SAVE 20% $ 500 / 5 x 10 mL
Standards originally designed in response to Save 20-40%
client requests for QC mixes that bracket the
Wt. Wt. curve and contain more C9+ analytes to verify Buy AccuPAKs
Compound Ratio Compound Ratio the instrument and QC solution integrity.
n-Hexane 12 Ethylbenzene 3
n-Heptane 17 m-Xylene 3
n-Octane 17 o-Xylene 3
n-Decane 12 1,2,4-Trimethylbenzene 3
n-Dodecane 5 1,2,4,5-Tetramethylbenzene 1
Isooctane 12 Pentamethylbenzene 1
Benzene 1 1-Methylnaphthalene 1
Toluene 9
15 Comp. Core Mix 100
3 Comp. Deuterated Internal Std. Mix 4 Comp. Deuterated Internal Std. Mix
M-GRA-IS-5ML $ 150 / 1 x 5 mL M-GRA-IS-R-10ML $ 225 / 1 x 10 mL
M-GRA-IS-5ML-PAK SAVE 20% $ 600 / 5 x 5 mL M-GRA-IS-R-10ML-PAK SAVE 20% $ 900 / 5 x 10 mL
3 comps. 4 comps.
Compound Mix Ratio Compound Mix Ratio
Benzene-d6 2 mL Benzene-d6 2 mL
Ethylbenzene-d10 2 mL Ethylbenzene-d10 2 mL
Naphthalene-d8 1 gm Naphthalene-d8 1 gm
Toluene-d8 7 mL
50 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5769
Member
Through a collaborative effort involving the instrument manufactures, Petrochemical end users, and Chemical Reference Standard manufacturers,
the following proposed D-5769 method is under consideration. A number of end users would like to evaluate this proposed D-5769 method and
have asked AccuStandard to make the standards. We have formulated the following certified standards to meet those requests.
ASTM
• Calibration standards when combined with internal standards are diluted into significantly more isooctane.
• The analytes in the Performance Standard have been expanded to better tune the GC/MS system for optimum performance.
• The number of components in the QA/QC mix has been reduced with new QA/QC tolerances.
• The number of analytes in the calibration mix has been reduced.
• Samples that exceed the linear range are to be diluted, reducing the number of extra calibration points required.
A
A
ST
ST
ST
ST
ST
M
M
-P
-P
-P
-P
-P
-0
-0
-0
-0
-0
14
14
14
14
14
0-
0-
0-
0-
0-
02
03
04
05
01
ASTM D-5772 Cloud Point of Petroleum Products (Linear Cooling Rate Method)
See page 5 for AccuStandard’s comprehensive line of certified Cloud Point Standards.
ASTM D-5773 Cloud Point of Petroleum Products (Constant Cooling Rate Method)
See page 5 for AccuStandard’s comprehensive line of certified Cloud Point Standards.
WEAR METALS
Test Method A - Sample Decomposition with Acid for Total Ni, V and Fe
Determination
Stock Multi-Element Matrix Blank
Aqueous Standard Nitric Acid Blank
D-5863-95A-10X-1 $ 75 / 1 x 100 mL CLP-BLN-5 $ 30 / 500 mL
2-5% HNO3 3 comps. CLP-BLN-L SAVE 33% $ 45 / L (2 x 500 mL)
µg/mL µg/mL
5% HNO3 in ASTM Type I Water
Iron 100 Vanadium 200
Nickel 200
Test Method B - Sample Dilution with Organic Solvent for the Determination of
Ni, V and Na using Oil-Soluble Metals as Calibrants.
Stock Multi-Element Standard in Standards of Interest
Mineral Oil
D-5863-95B-10X $ 160 / 1 x 4 oz
See pages 59-65 for AccuStandard’s
At stated conc. in 20 cst Mineral Oil 3 comps. comprehensive line of Certified Oil Dissolved
Wear Metal calibration standards designed for
µg/g µg/g
flame AA Applications.
Sodium 50 Vanadium 150
Nickel 200
52 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 5901 -
5986
Member
ASTM
on page 5.
ASTM D-5972 Freezing Point Aviation Fuels (Automated Phase Transition Method)
See page 5 for AccuStandard’s comprehensive line of Certified Freezing Point Standards.
ASTM D-5986 Oxygenates, Benzene, Toluene, C8-C12, Aromatics & Total Aromatics in Finished Gasolines by GC/FTIR
Originally designed for
D-5986-96
Daily Quality Control Standard Technical Note
(without Internal Standard) AccuStandard formulated this quality control
M-GRA-QC-10ML $ 125 / 1 x 10 mL standard to meet Section 11 of ASTM
M-GRA-QC-10ML-PAK SAVE 20% $ 500 / 5 x 10 mL Standards of Interest
D-5986-96 specifications stipulating to
Wt. Wt. “analyze the quality control reference material See page 34 for AccuStandard’s
Compound Ratio Compound Ratio before every batch of samples. Bracket the Oxygenate Calibration Curve
n-Hexane 12 Toluene 9 samples with the reference materials”. (Cat. No. M-GRO-CAL-SET)
n-Heptane 17 Ethylbenzene 3 and page 46 for AccuStandard’s
n-Octane 17 m-Xylene 3 Aromatic Calibration Curve (Cat.
n-Decane 12 o-Xylene 3 Oxygenate QC samples are available on
pages 1- 2 or can be custom formulated. No. D-5769-CAL-SET-5ML).
n-Dodecane 5 1,2,4-Trimethylbenzene 3
Isooctane 12 1,2,4,5-Tetramethylbenzene 3
Benzene 1
13 Comp. Core Mix 100
SAVE 20%
Aroclor Solutions (Individual and Kit) in PAK
ASTM
54 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 6293
6296
Member
ASTM D-6293 Oxygenates & Paraffin, Olefin, Naphthene, Aromatics (O-PONA) Hydrocarbon
types in Low-Olefin Spark-Ignition Engine Fuels by GC
Originally designed for
D-6293-98
O-PONA System Validation Mixture O-PONA Olefin Mix
ASTM
ASTM-P-0080 $ 135 / 1 x 1 mL ASTM-P-0081 $ 45 / 1 x 1 mL
ASTM-P-0080-PAK SAVE 26% $ 500 / 5 x 1 mL ASTM-P-0081-PAK $ 180 / 5 x 1 mL
33 comps. At stated conc. in Hexane : Heptane (1:1)
Wt./Wt. % Wt./Wt. % 5 comps.
Wt./Wt. %
Cyclopentane 1.5 Benzene 2.5
1-Pentene 5.0
n-Pentane 1.5 Toluene 2.5
1-Hexene 2.0
Cyclohexane 2.0 trans-Decahydronaphthelene 3.5
1-Heptene 2.0
2,3-Dimethylbutane 2.0 n-Tetradecane 2.0
1-Octene 2.0
n-Hexane 2.0 Ethylbenzene 3.5
1-Nonene 3.0
1-Hexene 1.5 o-Xylene 3.0
Methylcyclohexane 3.5 n-Propylbenzene 3.5
4-Methyl-1-hexene 1.5 1,2,4-Trimethylbenzene 3.0
n-Heptane 3.0 1,2,3-Trimethylbenzene 2.0 O-PONA Paraffin Mix
cis-1,2-Dimethylcyclohexane 4.5 1,2,4,5-Tetramethylbenzene 2.0 ASTM-P-0082 $ 25 / 1 x 1 mL
Isooctane 4.0 Pentamethylbenzene 2.5 ASTM-P-0082-PAK $ 100 / 5 x 1 mL
n-Octane 4.0 Ethanol 5.0 At stated conc. in Hexane : Heptane (1:1)
1,2,4-Trimethylcyclohexane 3.5 t-Butanol 4.0 2 comps.
n-Nonane 3.0 MtBE 8.0 Wt./Wt. %
n-Decane 3.5 ETBE 3.0 n-Nonane 5.0
n-Undecane 2.0 TAME 5.0 n-Decane 2.0
n-Dodecane 2.0
ASTM D-6296 Total Olefins in Spark-Ignition Engine Fuels by Multidimensional GC Originally designed for
D-6296-98
System Setup & Verification Standards System Setup & Verification Standards
D-6296-VER1 1 x 1 mL D-6296-VER2 1 x 1 mL
Wt. % 2 comps. Wt. % 2 comps.
MTBE 5% ETBE 5%
Isooctane 95% Isooctane 95%
Isooctane (Neat)
See Sulfur Standards Group listing in the Table of Contents for AccuStandard’s comprehensive
line of Certified Sulfur Calibration Standards.
ASTM D-6352 Boiling Range Distribution of Petroleum Distillates from 174 to 700ºC by GC Originally designed for
D-6352-98
56 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ASTM Standards Method 6379
IP 391
6417
Member 6428
ASTM D-6379 Aromatic Hydrocarbon Types in Aviation Fuels & Petroleum Distillates - Originally designed for
HPLC method with Refractive Index D-6379-99
ASTM
D-6379-SRS $ 40 / 1 x 1 mL D-6379-SET $ 100 / 4 x 1 mL
D-6379-SRS-PAK SAVE 30% $ 140 / 5 x 1 mL D-6379-SET-PAK SAVE 30% $ 350 / 5 x (4 x 1 mL)
At stated Conc. in n-Heptane 3 comps. At stated Conc. in n-Heptane
Cyclohexane 10 mg/mL
Analyte Std. 1 Std. 2 Std. 3 Std. 4
o-Xylene 0.5 mg/mL
1-Methyl naphthalene 0.05 mg/mL (mg/mL) (mg/mL) (mg/mL) (mg/mL)
Cyclohexane 5 2 0.5 0.1
o-Xylene 15 5 1.0 0.1
1-Methyl naphthalene 5 1.0 0.2 0.05
D-6428-R1-4-SET D-6428-R1-SET
Description Cat. No. Unit Cat. No. Unit
D-6428-R2-4-SET $ 275 / 6 x 4 oz
D-6428-R2-SET $ 65 / 6 x 1 mL
Sulfur as Dibenzothiophene
D-6428-R2-4-SET D-6428-R2-SET
Description Cat. No. Unit Cat. No. Unit
58 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Organometallic Standards Wear Metals
ORGANOMETALLIC
@ 1000 µg/g in @ 1000 µg/g in 20 cSt @ 5000 µg/g in 75 cSt 75 cSt Oil MOSOL-75-16 $ 10 / 16 oz.
hydrocarbon oil base oil base oil
100 mL 2 oz. bottle 2 oz. bottle 20 cSt Oil MOSOL-20-16 $ 10 / 16 oz.
C
Element Cat. No. Price Cat. No. Price Cat. No. Price
Aluminum WM-AA-01 $ 36 WM-20CST-01 $ 32 WM-75CST-01-5X $ 45 Stabilizer
Antimony WM-AA-02 36 WM-20CST-02 32 WM-75CST-02-5X 45 IS-7281-2OZ $ 95 / 1 x 2 oz.
Arsenic -------------- WM-20CST-03 40 ------------------------
Barium WM-AA-04 36 WM-20CST-04 32 WM-75CST-04-5X 45
Bismuth -------------- WM-20CST-06 32 WM-75CST-06-5X 45
Boron WM-AA-07 36 WM-20CST-07 32 WM-75CST-07-5X 45 Metals Additives Standards
Cadmium WM-AA-08 36 WM-20CST-08 32 WM-75CST-08-5X 45 MA-900-4 $ 100 / 4 oz.
Calcium WM-AA-09 36 WM-20CST-09 32 WM-75CST-09-5X 45 MA-900-8 $ 140 / 8 oz.
Chromium WM-AA-13 36 WM-20CST-13 32 WM-75CST-13-5X 45
Cobalt WM-AA-14 36 -------------------- ------------------------ Ba, Ca, Mg, P and Zn at 900 µg/g each in
Copper WM-AA-15 36 WM-20CST-15 56 WM-75CST-15-5X 170 Hydrocarbon oil
Iron WM-AA-27 36 WM-20CST-27 32 WM-75CST-27-5X 45
Lead WM-AA-29 36 WM-20CST-29 32 WM-75CST-29-5X 45
Lithium WM-AA-30 36 WM-20CST-30 32 WM-75CST-30-5X 45
Magnesium WM-AA-32 36 WM-20CST-32 32 WM-75CST-32-5X 45
Manganese WM-AA-33 36 WM-20CST-33 32 WM-75CST-33-5X 45
Mercury -------------- WM-20CST-34 42 ------------------------
Molybdenum WM-AA-35 36 WM-20CST-35 32 WM-75CST-35-5X 45
Nickel WM-AA-37 36 WM-20CST-37 32 WM-75CST-37-5X 45
Phosphorous WM-AA-41 36 WM-20CST-41 32 WM-75CST-41-5X 45
Potassium WM-AA-43 36 WM-20CST-43 32 WM-75CST-43-5X 45 Test to
Scandium -------------- WM-20CST-50 130 ------------------------
Silicon WM-AA-52 36 WM-20CST-52 56 WM-75CST-52-5X 170 Low ppb
Silver WM-AA-53 36 WM-20CST-53 56 WM-75CST-53-5X 170
Sodium
Strontium
WM-AA-54
WM-AA-55
36
36
WM-20CST-54
WM-20CST-55
32
32
WM-75CST-54-5X
------------------------
45 Sulfur
Thallium -------------- WM-20CST-60 42 ------------------------ See Pages 6-11
Tin WM-AA-63 36 WM-20CST-63 32 WM-75CST-63-5X 45
Titanium WM-AA-64 36 WM-20CST-64 32 WM-75CST-64-5X 45
Vanadium WM-AA-67 36 WM-20CST-67 32 WM-75CST-67-5X 45
Zinc WM-AA-70 36 WM-20CST-70 32 WM-75CST-70-5X 45
Zirconium -------------- WM-20CST-71 32 WM-75CST-71-5X 45
These highly concentrated stabilized solutions can be used for customer specific formulations of additive elements in lubricating oils, iron, nickel and vanadium
in residual oil, and wear metals in oils. These organometallic solutions can also be used to prepare single element or multi-element standards for plasma
emission (ICP or DCP), rotating disk (rotrode), or atomic absorption spectroscopy (AA). The starting materials for the standards are PURE REAGENTS and
have been certified against NIST SRM’s whenever available. THEY DO NOT CONTAIN PHOSPHORUS OR SULFUR. TRACE IMPURITIES ARE
DOCUMENTED ON THE CERTIFICATE OF ANALYSIS.
Element @ 1000 µg/g Price @ 5000 µg/g Price detection limits) organometallic standards
Cat. No. 50 mL Cat. No. 50 mL for X-ray Fluorescence (XRF), plasma
Aluminum WM-NMS-01 $ 50 WM-NMS-01-5X $ 90 emission (ICP or DCP), rotating disk
Antimony WM-NMS-02 50 WM-NMS-02-5X 90 (rotrode), or atomic absorption (AA). They
Barium WM-NMS-04 50 WM-NMS-04-5X 90 are stabilized for blending together with
Cadmium WM-NMS-08 50 WM-NMS-08-5X 90 other Analytes to prepare multi-element
Calcium WM-NMS-09 50 WM-NMS-09-5X 90 standards.
Chromium WM-NMS-13 50 WM-NMS-13-5X 90
Cobalt WM-NMS-14 75 WM-NMS-14-5X 110
Copper WM-NMS-15 75 WM-NMS-15-5X 110
Iron WM-NMS-27 50 WM-NMS-27-5X 90
Lead WM-NMS-29 50 WM-NMS-29-5X 90 Stabilization Solutions
Magnesium WM-NMS-32 50 WM-NMS-32-5X 90
Manganese WM-NMS-33 50 WM-NMS-33-5X 90 The solutions were specifically
Molybdenum WM-NMS-35 50 WM-NMS-35-5X 90
Nickel WM-NMS-37 50 WM-NMS-37-5X 90 designed for chelating and solubilizing
Phosphorous WM-NMS-41 50 WM-NMS-41-5X 90 the organometallic line of solids and
Potassium WM-NMS-43 50 WM-NMS-43-5X 90 solutions for single and multi-element
Selenium WM-NMS-51 60 WM-NMS-51-5X 100
Silicon WM-NMS-52 75 WM-NMS-52-5X 110
standards.
Sodium WM-NMS-54 50 WM-NMS-54-5X 90 Stabilizer Solutions A
Strontium WM-NMS-55 50 WM-NMS-55-5X 90 ASTM-P-0122-0.5 $ 80 / 50 mL
Thallium WM-NMS-60 60 WM-NMS-60-5X 100 ASTM-P-0122-1 $ 120 / 100 mL
Tin WM-NMS-63 50 WM-NMS-63-5X 90
Titanium WM-NMS-64 50 WM-NMS-64-5X 90
Vanadium WM-NMS-67 50 WM-NMS-67-5X 90
Yttrium WM-NMS-68 60 WM-NMS-68-5X 100
Stabilizer Solutions B
Zinc WM-NMS-70 50 WM-NMS-70-5X 90 ASTM-P-0123-0.5 $ 80 / 50 mL
Zirconium WM-NMS-71 50 WM-NMS-71-5X 90 ASTM-P-0123-1 $ 120 / 100 mL
(use in conjunction with stabilizer solution A)
60 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Organometallic Standards Wear Metals
Premium Sulfur-Free
ORGANOMETALLIC
300 WM-20-NMS-30X-1 230 300 WM-21-NMS-30X-1 240
500 WM-20-NMS-50X-1 350 500 WM-21-NMS-50X-1 350
900 WM-20-NMS-90X-1 500
WM-21-NMS-SET-1 $ 1050
C
WM-20-NMS-SET-1 $ 1450 set of above 6 x 100 mL
set of above 7 x 100 mL
Each Wear Metal Standard contains Each Wear Metal Standard contains
20 elements in hydrocarbon oil at 21 elements in hydrocarbon oil at
the stated concentration the stated concentration
Ag (Silver) Mo (Molybdenum)
Al (Aluminum) Mo (Molybdenum) Al (Aluminum) Na (Sodium)
B (Boron) Na (Sodium) B (Boron) Ni (Nickel)
Ba (Barium) Ni (Nickel) Ba (Barium) P (Phosphorus)
Ca (Calcium) P (Phosphorus) Ca (Calcium) Pb (Lead)
Cd (Cadmium) Pb (Lead) Cd (Cadmium) Si (Silicon)
Cr (Chromium) Si (Silicon) Cr (Chromium) Sn (Tin)
Cu (Copper) Sn (Tin) Cu (Copper) Ti (Titanium)
Fe (Iron) Ti (Titanium) Fe (Iron) V (Vanadium)
Mg (Magnesium) V (Vanadium) Mg (Magnesium) Zn (Zinc)
Mn (Manganese) Zn (Zinc) Mn (Manganese)
Test to
Low ppb
Sulfur
See Pages 6-11
ed for ed for
Design 08-95a Design 08-95a
-57
S T M D-57 ASTM
D
A
Sulfur and Metals in Mineral Oil Sulfur and Metals in Residual Fuel Oil
ASTM-P-0102-SET $ 1850 / 12 x 100 mL ASTM-P-0103-SET $ 2100 / 12 x 100 mL
Sulfur Iron Nickel Vanadium Sulfur Iron Nickel Vanadium
Cat. No. Conc. Conc. Conc. Conc. Price Cat. No. Conc. Conc. Conc. Conc. Price
(Wt. %) (µg/g) (µg/g) (µg/g) 100 mL (Wt. %) (µg/g) (µg/g) (µg/g) 100 mL
ASTM-P-0102-09 ----- 100 100 0 200 ASTM-P-0103-09 ----- 100 100 0 200
ASTM-P-0102-10 4.50 300 50 250 200 ASTM-P-0103-10 4.50 300 50 250 200
ASTM-P-0102-11 5.00 200 20 500 200 ASTM-P-0103-11 5.00 200 20 500 200
C
ISO/CD 14597
Vanadium and Nickel Standards with Manganese Internal Standard for ISO/CD 14597
Vanadium Standards - Low Range for ISO/CD Vanadium Standards - High Range for ISO/CD Nickel Standards for ISO/CD 14597 with 0.05%
14597 with 0.05% Manganese Internal Standard 14597 with 0.05% Manganese Internal Standard Manganese Internal Standard in Xylene-Mineral Oil
in Xylene-Mineral Oil in Xylene-Mineral Oil
ASTM-P-0104-SET $ 1050 / 9 x 100 mL ASTM-P-0105-SET $ 780 / 7 x 100 mL ASTM-P-0106-SET $ 780 / 7 x 100 mL
Vanadium Price Vanadium Price Nickel Price
Cat. No. Conc. (Wt.%) 100 mL Cat. No. Conc. (Wt.%) 100 mL Cat. No. Conc. (Wt.%) 100 mL
ASTM-P-0104-01 0.0005 $ 150 ASTM-P-0106-01 0.0000 $ 135
ASTM-P-0104-02 0.0025 150 ASTM-P-0105-01 0.0000 $ 135
ASTM-P-0105-02 0.0300 135 ASTM-P-0106-02 0.0005 135
ASTM-P-0104-03 0.0050 150
ASTM-P-0104-04 0.0075 150 ASTM-P-0105-03 0.0400 135 ASTM-P-0106-03 0.0010 135
ASTM-P-0104-05 0.0100 150 ASTM-P-0105-04 0.0500 135 ASTM-P-0106-04 0.0025 135
ASTM-P-0104-06 0.0125 150 ASTM-P-0105-05 0.0600 135 ASTM-P-0106-05 0.0050 135
ASTM-P-0104-07 0.0150 150 ASTM-P-0105-06 0.0800 135 ASTM-P-0106-06 0.0075 135
ASTM-P-0104-08 0.0175 150 ASTM-P-0105-07 0.1000 135 ASTM-P-0106-07 0.0100 135
ASTM-P-0104-09 0.0200 150
Internal Standard
ASTM-P-0107-5 $ 235 / 500 mL
62 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Organometallic Standards Wear Metals
Lubricating Oil, Elements Wt.% (Nominal Value) listed below Lubricating Oil, Elements Wt.% (Nominal Value) listed below
ASTM-P-0108-SET $ 1900 / 17 x 100 mL ASTM-P-0109-SET $ 1600 / 17 x 100 mL
Ca P S Zn Standard Ca Cl P S Zn
Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0108-01 0.600 0.005 0.175 0.060 ASTM-P-0109-01 0.600 0.100 0.005 0.175 0.060
ASTM-P-0108-02 0.500 0.200 0.050 0.080 ASTM-P-0109-02 0.500 0.000 0.200 0.050 0.080
ASTM-P-0108-03 0.400 0.150 0.300 0.180 ASTM-P-0109-03 0.400 0.010 0.150 0.300 0.180
ASTM-P-0108-04 0.260 0.250 0.150 0.120 ASTM-P-0109-04 0.260 0.500 0.250 0.150 0.120
ASTM-P-0108-05 0.005 0.005 0.450 0.070 ASTM-P-0109-05 0.005 1.000 0.005 0.450 0.070
ASTM-P-0108-06 0.400 0.025 0.350 0.100 ASTM-P-0109-06 0.400 0.400 0.025 0.350 0.100
ASTM-P-0108-07 0.300 0.060 0.250 0.120 ASTM-P-0109-07 0.300 0.100 0.060 0.250 0.120
ASTM-P-0108-08 0.200 0.100 0.450 0.100 ASTM-P-0109-08 0.200 0.010 0.100 0.450 0.100
ASTM-P-0108-09 0.060 0.080 0.300 0.130 ASTM-P-0109-09 0.060 0.050 0.080 0.300 0.130
ASTM-P-0108-10 0.060 0.050 0.200 0.050 ASTM-P-0109-10 0.060 0.200 0.050 0.200 0.050
ASTM-P-0108-11 0.050 0.120 0.100 0.075 ASTM-P-0109-11 0.050 0.500 0.120 0.100 0.075
ASTM-P-0108-12 0.025 0.150 0.200 0.130 ASTM-P-0109-12 0.025 0.800 0.150 0.200 0.130
ASTM-P-0108-13 0.005 0.200 0.400 0.150 ASTM-P-0109-13 0.005 1.000 0.200 0.400 0.150
WEAR METALS
ASTM-P-0108-14 0.170 0.250 0.550 0.110 ASTM-P-0109-14 0.170 0.600 0.250 0.550 0.110
ASTM-P-0108-15 0.100 0.100 0.200 0.200 ASTM-P-0109-15 0.100 0.200 0.100 0.200 0.200
ASTM-P-0108-16 0.010 0.010 0.600 0.250 ASTM-P-0109-16 0.010 0.400 0.010 0.600 0.250
ASTM-P-0108-17 0.000 0.000 0.000 0.000 ASTM-P-0109-17 0.000 0.000 0.000 0.000 0.000
ed for
Design 927-96
D -4 ed for
ASTM Design 927-96
D -4
Lubricating Oil, Elements Wt.% (Nominal Value) listed below Lubricating Oil, Elements Wt.% (Nominal Value) listed below ASTM
ASTM-P-0110-SET $ 2300 / 17 x 100 mL ASTM-P-0111-SET $ 2800 / 17 x 100 mL
Ba Ca P S Zn Ba Ca Cl P S Zn
Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0110-01 0.100 0.600 0.005 0.175 0.060 ASTM-P-0111-01 0.100 0.600 0.100 0.005 0.175 0.060
ASTM-P-0110-02 0.175 0.500 0.200 0.050 0.080 ASTM-P-0111-02 0.175 0.500 0.000 0.200 0.050 0.080
ASTM-P-0110-03 0.000 0.400 0.150 0.300 0.180 ASTM-P-0111-03 0.000 0.400 0.010 0.150 0.300 0.180
ASTM-P-0110-04 0.025 0.260 0.250 0.150 0.120 ASTM-P-0111-04 0.025 0.260 0.500 0.250 0.150 0.120
ASTM-P-0110-05 0.150 0.005 0.005 0.450 0.070 ASTM-P-0111-05 0.150 0.005 1.000 0.005 0.450 0.070
ASTM-P-0110-06 0.000 0.400 0.025 0.350 0.100 ASTM-P-0111-06 0.000 0.400 0.400 0.025 0.350 0.100
ORGANOMETALLIC
ASTM-P-0110-07 0.200 0.300 0.060 0.250 0.120 ASTM-P-0111-07 0.200 0.300 0.100 0.060 0.250 0.120
ASTM-P-0110-08 0.000 0.200 0.100 0.450 0.100 ASTM-P-0111-08 0.000 0.200 0.010 0.100 0.450 0.100
ASTM-P-0110-09 0.100 0.060 0.080 0.300 0.130 ASTM-P-0111-09 0.100 0.060 0.050 0.080 0.300 0.130
ASTM-P-0110-10 0.050 0.060 0.050 0.200 0.050 ASTM-P-0111-10 0.050 0.060 0.200 0.050 0.200 0.050
C
ASTM-P-0110-11 0.075 0.050 0.120 0.100 0.075 ASTM-P-0111-11 0.075 0.050 0.500 0.120 0.100 0.075
ASTM-P-0110-12 0.010 0.025 0.150 0.200 0.130 ASTM-P-0111-12 0.010 0.025 0.800 0.150 0.200 0.130
ASTM-P-0110-13 0.005 0.005 0.200 0.400 0.150 ASTM-P-0111-13 0.005 0.005 1.000 0.200 0.400 0.150
ASTM-P-0110-14 0.000 0.170 0.250 0.550 0.110 ASTM-P-0111-14 0.000 0.170 0.600 0.250 0.550 0.110
ASTM-P-0110-15 0.000 0.100 0.100 0.200 0.200 ASTM-P-0111-15 0.000 0.100 0.200 0.100 0.200 0.200
ASTM-P-0110-16 0.005 0.010 0.010 0.600 0.250 ASTM-P-0111-16 0.005 0.010 0.400 0.010 0.600 0.250
ASTM-P-0110-17 0.000 0.000 0.000 0.000 0.000 ASTM-P-0111-17 0.000 0.000 0.000 0.000 0.000 0.000
A S TM
ed for
Design & D-4927-96
-97
Lubricating Oil, Elements Wt.% (Nominal Value) listed below Lubricating Oil, Elements Wt.% (Nominal Value) listed below D-4628
ASTM-P-0112-SET $ 2300 / 16 x 100 mL ASTM-P-0113-SET $ 2850 / 17 x 100 mL
Ca Mg P S Zn Ba Ca Mg P S Zn
Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)
ASTM-P-0112-01 0.600 0.100 0.005 0.175 0.060 ASTM-P-0113-01 0.025 0.600 0.100 0.005 0.175 0.060
ASTM-P-0112-02 0.500 0.150 0.200 0.050 0.080 ASTM-P-0113-02 0.000 0.500 0.150 0.200 0.050 0.080
ASTM-P-0112-03 0.400 0.350 0.150 0.300 0.180 ASTM-P-0113-03 0.100 0.400 0.350 0.150 0.300 0.180
ASTM-P-0112-04 0.260 0.225 0.250 0.150 0.120 ASTM-P-0113-04 0.175 0.260 0.225 0.250 0.150 0.120
ASTM-P-0112-05 0.005 0.450 0.005 0.450 0.070 ASTM-P-0113-05 0.150 0.005 0.450 0.005 0.450 0.070
ASTM-P-0112-06 0.400 0.500 0.025 0.350 0.100 ASTM-P-0113-06 0.000 0.400 0.500 0.025 0.350 0.100
ASTM-P-0112-07 0.300 0.325 0.060 0.250 0.120 ASTM-P-0113-07 0.100 0.300 0.325 0.060 0.250 0.120
ASTM-P-0112-08 0.200 0.250 0.100 0.450 0.100 ASTM-P-0113-08 0.200 0.200 0.250 0.100 0.450 0.100
ASTM-P-0112-09 0.060 0.100 0.080 0.300 0.130 ASTM-P-0113-09 0.050 0.060 0.100 0.080 0.300 0.130
ASTM-P-0112-10 0.060 0.400 0.050 0.200 0.050 ASTM-P-0113-10 0.075 0.060 0.400 0.050 0.200 0.050
ASTM-P-0112-11 0.050 0.300 0.120 0.100 0.075 ASTM-P-0113-11 0.010 0.050 0.300 0.120 0.100 0.075
ASTM-P-0112-12 0.025 0.200 0.150 0.200 0.130 ASTM-P-0113-12 0.000 0.025 0.200 0.150 0.200 0.130
ASTM-P-0112-13 0.005 0.375 0.200 0.400 0.150 ASTM-P-0113-13 0.175 0.005 0.375 0.200 0.400 0.150
ASTM-P-0112-14 0.170 0.175 0.250 0.550 0.110 ASTM-P-0113-14 0.005 0.170 0.175 0.250 0.550 0.110
ASTM-P-0112-15 0.100 0.425 0.100 0.200 0.200 ASTM-P-0113-15 0.000 0.100 0.425 0.100 0.200 0.200
ASTM-P-0112-16 0.010 0.275 0.010 0.600 0.250 ASTM-P-0113-16 0.005 0.010 0.275 0.010 0.600 0.250
ASTM-P-0112-17 0.000 0.000 0.000 0.000 0.000 ASTM-P-0113-17 0.000 0.000 0.000 0.000 0.000 0.000
ASTM-P-0114-16 0.400 0.050 0.600 0.250 ASTM-P-0115-16 0.400 0.050 0.600 0.250 0.275
ASTM-P-0114-17 0.000 0.000 0.000 0.000 ASTM-P-0115-17 0.000 0.000 0.000 0.000 0.000
Lubricating Oil, Elements, WLXRF ASTM Method Wt.% (Nominal Value) listed below
C
Lubricating Oil, Elements, WLXRF ASTM Method Wt.% (Nominal Value) listed below
ASTM-P-0118-SET $ 2400 / 10 x 100 mL
Ba Ca Cl Cu Mg P S Zn
STM
Cat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) for A 6
s i g ned -4927-9
ASTM-P-0118-01 0.020 0.020 0.030 0.010 0.200 0.250 1.000 0.020 De -97, D 43-99
28 64
ASTM-P-0118-02 0.250 0.020 0.020 0.050 0.200 0.020 0.020 0.250 D-46 1-96, D-
- 4 9 5
ASTM-P-0118-03 0.020 0.020 0.200 0.010 0.040 0.250 0.150 0.250 D
ASTM-P-0118-04 0.250 0.020 0.200 0.050 0.040 0.020 1.000 0.020
ASTM-P-0118-05 0.020 0.400 0.020 0.010 0.040 0.020 1.000 0.250
ASTM-P-0118-06 0.250 0.400 0.020 0.050 0.040 0.250 0.020 0.020
ASTM-P-0118-07 0.020 0.400 0.200 0.010 0.200 0.020 0.020 0.050
ASTM-P-0118-08 0.250 0.400 0.200 0.050 0.200 0.250 1.000 0.250
ASTM-P-0118-09 0.130 0.200 0.100 0.025 0.080 0.150 0.500 0.100
ASTM-P-0118-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
64 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Organometallic Standards for Wear Metals
ORGANOMETALLIC
ASTM-P-0120-09 0.000 0.250 0.150 0.010 0.160 0.000 0.350 0.080
ASTM-P-0120-10 0.000 0.110 0.150 0.040 0.005 0.030 0.750 0.150
ASTM-P-0120-11 0.100 0.260 0.050 0.000 0.000 0.000 0.750 0.000
ASTM-P-0120-12 0.050 0.200 0.000 0.005 0.140 0.080 0.500 0.080
C
ASTM-P-0120-13 0.000 0.000 0.000 0.005 0.020 0.020 0.200 0.020
ASTM-P-0120-14 0.080 0.070 0.150 0.020 0.080 0.140 0.650 0.150
ASTM-P-0120-15 0.010 0.050 0.000 0.000 0.000 0.150 0.000 0.000
ASTM-P-0120-16 0.000 0.400 0.000 0.001 0.080 0.000 0.500 0.020
ASTM-P-0120-17 0.000 0.180 0.020 0.020 0.000 0.020 0.600 0.060
ASTM-P-0120-18 0.000 0.400 0.010 0.001 0.010 0.020 0.000 0.000
ASTM-P-0120-19 0.150 0.010 0.020 0.040 0.010 0.020 0.200 0.100
ASTM-P-0120-20 0.005 0.050 0.005 0.050 0.000 0.008 0.000 0.120
ASTM-P-0120-21 0.100 0.200 0.050 0.020 0.080 0.050 0.275 0.050
ASTM-P-0120-22 0.120 0.200 0.000 0.000 0.000 0.000 0.750 0.000
ASTM-P-0120-23 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Proposed ASTM Method Trace Metals Phosphorous, Sulfur, Calcium, & Zinc in Lubrication Oils by XRF
ASTM-P-0090-SET $ 1600 / 16 x 4 oz.
Proposed ASTM Method for Chlorine in Lube Oils Chlorine in Lube Oils
ASTM-P-0092-SET $ 400 / 7 x 4 oz.
Cat. No. Chlorine Chlorine Unit Price
Wt. % µg/g
ASTM-P-0092-BL Blank Blank 4 oz. $ 10
ASTM-P-0092-0.1X 0.001 10 4 oz. 75
ASTM-P-0092-1X 0.01 100 4 oz. 75
ASTM-P-0092-5X 0.05 500 4 oz. 75
ASTM-P-0092-10X 0.1 1,000 4 oz. 75
ASTM-P-0092-100X 1 10,000 4 oz. 75
ASTM-P-0092-500X 5 50,000 4 oz. 75
The Organo Tin standards shown below were developed in response to concerns about Organo Tin as an endocrine disrupter. Organo Tin
ORGANOMETALLIC
compounds such as Tributyl Tin were used as marine antifouling agents and Triphenyl Tin as a crop pesticide.
C
Organo Tin Analysis Sample Extraction, Derivatization & Cleanup with Analysis by Flame-Photometric Detector
Butyltin Chloride Standard Tri-n-propyltin Chloride Tetra-n-propyltin chloride
OMT-001 $ 40 / 1 x 1 mL Surrogate Standard Internal Standard
OMT-001-PAK SAVE 20% $ 160 / 5 x 1 mL OMT-003 $ 30 / 1 x 1 mL OMT-005 $ 40 / 1 x 1 mL
2000 µg/mL each in CH2Cl2 4 comps. OMT-003-PAK SAVE 20% $ 120 / 5 x 1 mL OMT-005-PAK SAVE 20% $ 160 / 5 x 1 mL
2000 µg/mL in CH2Cl2 2000 µg/mL in CH2Cl2
Butyltin trichloride Tetrabutyltin
Dibutyltin dichloride Tributyltin chloride
Tri-n-propyltin chloride Tetra-n-propyl tin chloride
66 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Inorganic Standards
INO
• Formulated from High Purity Starting Materials, Water & Acids Inorganic Petrochemical
• Concentration verified by Wet Chemical & Instrumental Analysis
• Certificate of Analysis provided with each Standard
Reference Standards
• Actual Lot Analysis provided on label & Certificate of Analysis page
• Packaged in specially prepared pre-cleaned bottles ICP 68-71
• 18 Month Stability Dating IPC/MS 72
AA 73-75
Ion Chrom 76-79
INORGANIC
20 mL of concentrate, pre-cleaned and pre-
labeled dilution bottle, instructions and
Certificate of Analysis
69 elements at 10K µg/mL &
Empty 59 elements at 25K µg/mL
Pre-Washed HAZ see pages 68-71
500 mL
Bottle FEE AA
20 mL
Concentrate 69 elements at 10K µg/mL &
59 elements at 25K µg/mL
see pages 73-75
20 mL meets the Excepted Quantity rule under DOT & IATA regulations which
do not require hazardous shipping fees.
68 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ICP Single Element Standards
Plasma Emission Spectroscopy
Element NoHaz Package (No Hazardous Charges) *
Starting Mat'l 1000 µg/mL 10,000 µg/mL 10,000 µg/mL 25,000 µg/mL
Matrix Unit Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. Price
Gallium 20 mL ------ -- ------ -- ICP-20N-10X-20ML $ 55 ------ --
Ga 50 mL ------ -- ICP-20N-0.5-10X $ 45 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-20N-1 $ 42 ICP-20N-1-10X 75 ------ -- ------ --
500 mL ICP-20N-5 82 ICP-20N-5-10X 165 ------ -- ------ --
Germanium 20 mL ------ -- ------ -- ICP-21W-10X-20ML 55 ------ --
(NH4)2GeF6 50 mL ------ -- ICP-21W-0.5-10X 52 ------ -- ------ --
Water tr. HF 100 mL ICP-21W-1 42 ICP-21W-1-10X 85 ------ -- ------ --
500 mL ICP-21W-5 82 ICP-21W-5-10X 231 ------ -- ------ --
Gold 20 mL ------ -- ------ -- ICP-22H-10X-20ML 95 ICP-22H-25X-20ML $ 165
Au 50 mL ------ -- ICP-22H-0.5-10X 175 ------ -- ------ --
10% HCl (min.) 100 mL ICP-22H-1 78 ICP-22H-1-10X 295 ------ -- ------ --
500 mL ICP-22H-5 152 ICP-22H-5-10X 695 ------ -- ------ --
Hafnium 20 mL ------ -- ------ -- ICP-23N-10X-20ML 75 ICP-23N-25X-20ML 135
HfO2 50 mL ------ -- ICP-23N-0.5-10X 80 ------ -- ------ --
2-5% Nitric acid tr. HF 100 mL ICP-23N-1 60 ICP-23N-1-10X 135 ------ -- ------ --
500 mL ICP-23N-5 118 ICP-23N-5-10X 364 ------ -- ------ --
Holmium 20 mL ------ -- ------ -- ICP-24N-10X-20ML 55 ICP-24N-25X-20ML 100
Ho2O3 50 mL ------ -- ICP-24N-0.5-10X 52 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-24N-1 42 ICP-24N-1-10X 85 ------ -- ------ --
500 mL ICP-24N-5 82 ICP-24N-5-10X 259 ------ -- ------ --
Indium 20 mL ------ -- ------ -- ICP-25N-10X-20ML 55 ICP-25N-25X-20ML 100
In 50 mL ------ -- ICP-25N-0.5-10X 52 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-25N-1 42 ICP-25N-1-10X 85 ------ -- ------ --
500 mL ICP-25N-5 82 ICP-25N-5-10X 185 ------ -- ------ --
Iridium 20 mL ------ -- ------ -- ICP-26H-10X-20ML 95 ICP-26H-25X-20ML 175
IrCl3 • 3H20 50 mL ------ -- ICP-26H-0.5-10X 175 ------ -- ------ --
10% HCl (min.) 100 mL ICP-26H-1 78 ICP-26H-1-10X 295 ------ -- ------ --
500 mL ICP-26H-5 152 ICP-26H-5-10X 695 ------ -- ------ --
Iron 20 mL ------ -- ------ -- ICP-27N-10X-20ML 37 ICP-27N-25X-20ML 70
Fe 50 mL ------ -- ICP-27N-0.5-10X 32 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-27N-1 34 ICP-27N-1-10X 54 ------ -- ------ --
500 mL ICP-27N-5 67 ICP-27N-5-10X 120 ------ -- ------ --
Lanthanum 20 mL ------ -- ------ -- ICP-28N-10X-20ML 37 ICP-28N-25X-20ML 80
La2O3 50 mL ------ -- ICP-28N-0.5-10X 32 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-28N-1 34 ICP-28N-1-10X 54 ------ -- ------ --
500 mL ICP-28N-5 67 ICP-28N-5-10X 168 ------ -- ------ --
Lead 20 mL ------ -- ------ -- ICP-29N-10X-20ML 37 ICP-29N-25X-20ML 70
Pb(NO3)2 50 mL ------ -- ICP-29N-0.5-10X 32 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-29N-1 34 ICP-29N-1-10X 54 ------ -- ------ --
500 mL ICP-29N-5 67 ICP-29N-5-10X 168 ------ -- ------ --
Lithium 20 mL ------ -- ------ -- ICP-30N-10X-20ML 37 ICP-30N-25X-20ML 70
Li2CO3 50 mL ------ -- ICP-30N-0.5-10X 32 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-30N-1 34 ICP-30N-1-10X 54 ------ -- ------ --
500 mL ICP-30N-5 67 ICP-30N-5-10X 120 ------ -- ------ --
Lutetium 20 mL ------ -- ------ -- ICP-31N-10X-20ML 90 ICP-31N-25X-20ML 300
Lu2O3 50 mL ------ -- ICP-31N-0.5-10X 175 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-31N-1 75 ICP-31N-1-10X 295 ------ -- ------ --
500 mL ICP-31N-5 285 ICP-31N-5-10X 1393 ------ -- ------ --
Magnesium 20 mL ------ -- ------ -- ICP-32N-10X-20ML 37 ICP-32N-25X-20ML 70
MgO 50 mL ------ -- ICP-32N-0.5-10X 32 ------ -- ------ --
ICP
2-5% Nitric acid 100 mL ICP-32N-1 34 ICP-32N-1-10X 54 ------ -- ------ --
500 mL ICP-32N-5 67 ICP-32N-5-10X 120 ------ -- ------ --
Manganese 20 mL ------ -- ------ -- ICP-33N-10X-20ML 37 ICP-33N-25X-20ML 70
Mn(C2H3O2)2 50 mL ------ -- ICP-33N-0.5-10X 32 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-33N-1 34 ICP-33N-1-10X 54 ------ -- ------ --
500 mL ICP-33N-5 67 ICP-33N-5-10X 168 ------ -- ------ --
Mercury 20 mL ------ -- ------ -- ICP-34N-10X-20ML 37 ICP-34N-25X-20ML 70
Hg 50 mL ------ -- ICP-34N-0.5-10X 32 ------ -- ------ --
10% Nitric acid 100 mL ICP-34N-1 34 ICP-34N-1-10X 54 ------ -- ------ --
500 mL ICP-34N-5 67 ICP-34N-5-10X 120 ------ -- ------ --
Molybdenum 20 mL ------ -- ------ -- ICP-35W-10X-20ML 37 ICP-35W-25X-20ML 70
(NH4)2MoO4 50 mL ------ -- ICP-35W-0.5-10X 32 ------ -- ------ --
Water tr. NH4OH 100 mL ICP-35W-1 34 ICP-35W-1-10X 54 ------ -- ------ --
500 mL ICP-35W-5 67 ICP-35W-5-10 120 ------ -- ------ --
Neodymium 20 mL ------ -- ------ -- ICP-36N-10X-20ML 37 ICP-36N-25X-20ML 80
Nd2O3 50 mL ------ -- ICP-36N-0.5-10X 45 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-36N-1 34 ICP-36N-1-10X 75 ------ -- ------ --
500 mL ICP-36N-5 67 ICP-36N-5-10X 203 ------ -- ------ --
Nickel 20 mL ------ -- ------ -- ICP-37N-10X-20ML 37 ICP-37N-25X-20ML 70
Ni 50 mL ------ -- ICP-37N-0.5-10X 32 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-37N-1 34 ICP-37N-1-10X 54 ------ -- ------ --
500 mL ICP-37N-5 67 ICP-37N-5-10X 120 ------ -- ------ --
Single Element Standards for Plasma Emission Spectroscopy Continued on Next Page
* see page 67 for details
70 Quality System is Certified to comply with the International ISO 9001 Quality Standard
ICP Single Element Standards
Plasma Emission Spectroscopy
Element NoHaz Package (No Hazardous Charges) *
Starting Mat'l 1000 µg/mL 10,000 µg/mL 10,000 µg/mL 25,000 µg/mL
Matrix Unit Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. Price
Tellurium 20 mL ------ -- ------ -- ICP-58H-10X-20ML $ 37 ------ --
Te 50 mL ------ -- ICP-58H-0.5-10X $ 46 ------ -- ------ --
10% HCl (min.) 100 mL ICP-58H-1 $ 34 ICP-58H-1-10X 78 ------ -- ------ --
500 mL ICP-58H-5 67 ICP-58H-5-10X 210 ------ -- ------ --
Terbium 20 mL ------ -- ------ -- ICP-59N-10X-20ML 55 ICP-59N-25X-20ML $ 100
Tb4O7 50 mL ------ -- ICP-59N-0.5-10X 69 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-59N-1 42 ICP-59N-1-10X 115 ------ -- ------ --
500 mL ICP-59N-5 82 ICP-59N-5-10X 315 ------ -- ------ --
Thallium 20 mL ------ -- ------ -- ICP-60N-10X-20ML 37 ICP-60N-25X-20ML 70
Tl 50 mL ------ -- ICP-60N-0.5-10X 32 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-60N-1 34 ICP-60N-1-10X 54 ------ -- ------ --
500 mL ICP-60N-5 67 ICP-60N-5-10X 125 ------ -- ------ --
Thorium 100 mL ICP-61N-1 34 ------ -- ------ -- ------ --
Th(NO3)4 • 4H2O 500 mL ICP-61N-5 67 ------ -- ------ -- ------ --
2-5% Nitric acid
ICP
500 mL ICP-69N-5 67 ICP-69N-5-10X 120 ------ -- ------ --
Zinc 20 mL ------ -- ------ -- ICP-70N-10X-20ML 37 ICP-70N-25X-20ML 70
Zn 50 mL ------ -- ICP-70N-0.5-10X 32 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-70N-1 34 ICP-70N-1-10X 54 ------ -- ------ --
500 mL ICP-70N-5 67 ICP-70N-5-10X 120 ------ -- ------ --
Zirconium 20 mL ------ -- ------ -- ICP-71N-10X-20ML 37 ICP-71N-25X-20ML 70
ZrO(NO3)2 50 mL ------ -- ICP-71N-0.5-10X 42 ------ -- ------ --
2-5% Nitric acid 100 mL ICP-71N-1 34 ICP-71N-1-10X 70 ------ -- ------ --
500 mL ICP-71N-5 67 ICP-71N-5-10X 203 ------ -- ------ --
5% HNO3 in ASTM Type I Water 5% HCl in ASTM Type I Water 5% HCl + 1% HNO3 in ASTM Type I Water
ASTM Type I Water
AccuStandard’s ICP/MS Standards are formulated to meet the needs of this very special instrument. As matrix effect is of utmost concern, each
standard is formulated in specially purified de-ionized 18 megohm water and Parts per Trillion acids; after both wet chemical and instrumental
analysis, the standards are packaged in acid leached FLPE containers to provide required protection and, of course, all standards are traceable to
the National Institute of Standards and Technology (NIST) weights and Reference Materials.
If you need an element that is not listed above or you require a different matrix, size or
concentration, our experienced chemists will provide you with a custom quotation.
Get exactly what you need.
72 Quality System is Certified to comply with the International ISO 9001 Quality Standard
AA Single Element Standards
Atomic Absorption Spectroscopy
Traceable to NIST Reference Materials Most available in either Nitric or Hydrochloric acid matrix
Certificate of Analysis included at No Charge with each Standard ISO 9001 Quality System
Actual Concentration Analysis
Each standard is prepared from high purity starting material, de-ionized water and high purity acids. Every standard is instrumentally assayed
to verify concentration of specified element. Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease of
record keeping and availability at audits.
AA
500 mL AA15N-5 30 ------ -- ------ --
Dysprosium 20 mL ------ -- AA16N-10X-20ML 35 AA16N-25X-20ML 60
2-5% Nitric acid 100 mL AA16N-1 20 ------ -- ------ --
500 mL AA16N-5 45 ------ -- ------ --
Erbium 20 mL ------ -- AA17N-10X-20ML 35 AA17N-25X-20ML 60
2-5% Nitric acid 100 mL AA17N-1 20 ------ -- ------ --
500 mL AA17N-5 45 ------ -- ------ --
Europium 20 mL ------ -- AA18N-10X-20ML 35 AA18N-25X-20ML 60
2-5% Nitric acid 100 mL AA18N-1 20 ------ -- ------ --
500 mL AA18N-5 45 ------ -- ------ --
Gadolinium 20 mL ------ -- AA19N-10X-20ML 35 AA19N-25X-20ML 60
2-5% Nitric acid 100 mL AA19N-1 20 ------ -- ------ --
500 mL AA19N-5 45 ------ -- ------ --
Gallium 20 mL ------ -- AA20N-10X-20ML 45 ------ --
2-5% Nitric acid 100 mL AA20N-1 15 ------ -- ------ --
500 mL AA20N-5 36 ------ -- ------ --
Germanium 20 mL ------ -- AA21W-10X-20ML 35 ------ --
Water tr. HF 100 mL AA21W-1 18 ------ -- ------ --
500 mL AA21W-5 40 ------ -- ------ --
Gold 20 mL ------ -- AA22H-10X-20ML 80 AA22H-25X-20ML 200
10% HCl (min.) 100 mL AA22H-1 66 ------ -- ------ --
500 mL AA22H-5 179 ------ -- ------ --
74 Quality System is Certified to comply with the International ISO 9001 Quality Standard
AA Single Element Standards
Atomic Absorption Spectroscopy
Element NoHaz Package (No Hazardous Charges) *
* see page 67
Starting Mat'l 1000 µg/mL 10,000 µg/mL 25,000 µg/mL for details
Matrix Unit Cat. No. Price Cat. No. Price Cat. No. Price
Samarium 20 mL ------ -- AA49N-10X-20ML $ 35 AA49N-25X-20ML $ 60
2-5% Nitric acid 100 mL AA49N-1 $ 20 ------ -- ------ --
500 mL AA49N-5 45 ------ -- ------ --
Scandium 20 mL ------ -- AA50N-10X-20ML 75 AA50N-25X-20ML 160
2-5% Nitric acid 100 mL AA50N-1 62 ------ -- ------ --
500 mL AA50N-5 145 ------ -- ------ --
Selenium 20 mL ------ -- AA51N-10X-20ML 20 AA51N-25X-20ML 50
2-5% Nitric acid 100 mL AA51N-1 19 ------ -- ------ --
500 mL AA51N-5 46 ------ -- ------ --
Silicon 20 mL ------ -- AA-52W-10X-20ML 20 ------ --
Water tr. HF 100 mL AA52W-1 13 ------ -- ------ --
500 mL AA52W-5 33 ------ -- ------ --
Silver 20 mL ------ -- AA53N-10X-20ML 20 AA53N-25X-20ML 45
2-5% Nitric acid 100 mL AA53N-1 16 ------ -- ------ --
500 mL AA53N-5 40 ------ -- ------ --
Sodium 20 mL ------ -- AA54N-10X-20ML 20 AA54N-25X-20ML 37
2-5% Nitric acid 100 mL AA54N-1 13 ------ -- ------ --
500 mL AA54N-5 33 ------ -- ------ --
Strontium 20 mL ------ -- AA55N-10X-20ML 20 AA55N-25X-20ML 37
2-5% Nitric acid 100 mL AA55N-1 12 ------ -- ------ --
500 mL AA55N-5 30 ------ -- ------ --
Sulfur 20 mL ------ -- AA56W-10X-20ML 20 AA56W-25X-20ML 37
Water 100 mL AA56W-1 15 ------ -- ------ --
500 mL AA56W-5 35 ------ -- ------ --
Tantalum 20 mL ------ -- AA57W-10X-20ML 35 AA57W-25X-20ML 60
Water tr. HF 100 mL AA57W-1 15 ------ -- ------ --
500 mL AA57W-5 35 ------ -- ------ --
Tellurium 20 mL ------ -- AA58H-10X-20ML 20
10% HCl (min.) 100 mL AA58H-1 15 ------ -- ------ --
500 mL AA58H-5 35 ------ -- ------ --
Terbium 20 mL ------ -- AA59N-10X-20ML 35 AA59N-25X-20ML 60
2-5% Nitric acid 100 mL AA59N-1 20 ------ -- ------ --
500 mL AA59N-5 45 ------ -- ------ --
Thallium 20 mL ------ -- AA60N-10X-20ML 20 AA60N-25X-20ML 37
2-5% Nitric acid 100 mL AA60N-1 15 ------ -- ------ --
500 mL AA60N-5 35 ------ -- ------ --
Thorium 20 mL ------ -- ------ -- ------ --
100 mL AA61N-1 20 ------ -- ------ --
2-5% Nitric acid 500 mL AA61N-5 45 ------ -- ------ --
Thulium 20 mL ------ -- AA62N-10X-20ML 65 AA62N-25X-20ML 150
2-5% Nitric acid 100 mL AA62N-1 60 ------ -- ------ --
500 mL AA62N-5 135 ------ -- ------ --
Tin 20 mL ------ -- AA63N-10X-20ML 20 AA63N-25X-20ML 50
2-5% Nitric acid tr. HF 100 mL AA63N-1 19 ------ -- ------ --
500 mL AA63N-5 46 ------ -- ------ --
Titanium 20 mL ------ -- AA64W-10X-20ML 20 ------ --
Water tr. HF 100 mL AA64W-1 13 ------ -- ------ --
500 mL AA64W-5 33 ------ -- ------ --
Tungsten 20 mL ------ -- AA65W-10X-20ML 20
Water tr. NH4OH 100 mL AA65W-1 15 ------ -- ------ --
500 mL AA65W-5 35 ------ -- ------ --
AA
Uranium 20 mL ------ -- ------ -- ------ --
2-5% Nitric acid 100 mL AA66N-1 15 ------ -- ------ --
500 mL AA66N-5 35 ------ -- ------ --
Vanadium 20 mL ------ -- AA67N-10X-20ML 20 AA67N-25X-20ML 37
2-5% Nitric acid 100 mL AA67N-1 13 ------ -- ------ --
500 mL AA67N-5 33 ------ -- ------ --
Ytterbium 20 mL ------ -- AA68N-10X-20ML 35 AA68N-25X-20ML 60
2-5% Nitric acid 100 mL AA68N-1 20 ------ -- ------ --
500 mL AA68N-5 45 ------ -- ------ --
Yttrium 20 mL ------ -- AA69N-10X-20ML 20 AA69N-25X-20ML 37
2-5% Nitric acid 100 mL AA69N-1 15 ------ -- ------ --
500 mL AA69N-5 35 ------ -- ------ --
Zinc 20 mL ------ -- AA70N-10X-20ML 20 AA70N-25X-20ML 37
2-5% Nitric acid 100 mL AA70N-1 13 ------ -- ------ --
500 mL AA70N-5 33 ------ -- ------ --
Zirconium 20 mL ------ -- AA71N-10X-20ML 20 AA71N-25X-20ML 37
2-5% Nitric acid 100 mL AA71N-1 15 ------ -- ------ --
500 mL AA71N-5 35 ------ -- ------ --
Kit Price SAVE 25% 100 mL IC-AN-KIT-1X-1 $ 75 IC-AN-KIT-2X-1 $ 130 IC-AN-KIT-10X-1$ 235
Kit = one bottle of each analyte 7 x 100 mL 7 x 100 mL 7 x 100 mL
IC-F-1X-1 IC-Cl-1X-1 IC-F-2X-1 IC-Cl-2X-1 IC-F-10X-1 IC-Cl-10X-1
IC-NO2-1X-1 IC-NO3-1X-1 IC-NO2-2X-1 IC-NO3-2X-1 IC-NO2-10X-1 IC-NO3-10X-1
IC-BR-1X-1 IC-PO4-1X-1 IC-BR-2X-1 IC-PO4-2X-1 IC-BR-10X-1 IC-PO4-10X-1
IC-SO4-1X-1 IC-SO4-2X-1 IC-SO4-10X-1
Kit Price SAVE 25% 500 mL IC-AN-KIT-1X-5 $ 285 IC-AN-KIT-2X-5 $ 315 IC-AN-KIT-10X-5$ 365
Kit = one bottle of each analyte 7 x 500 mL 7 x 500 mL 7 x 500 mL
IC-F-1X-5 IC-Cl-1X-5 IC-F-2X-5 IC-Cl-2X-5 IC-F-10X-5 IC-Cl-10X-5
IC-NO2-1X-5 IC-NO3-1X-5 IC-NO2-2X-5 IC-NO3-2X-5 IC-NO2-10X-5 IC-NO3-10X-5
IC-BR-1X-5 IC-PO4-1X-5 IC-BR-2X-5 IC-PO4-2X-5 IC-BR-10X-5 IC-PO4-10X-5
IC-SO4-1X-5 IC-SO4-2X-5 IC-SO4-10X-5
76 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Ion Chromatography
Anion Mixtures IC
IC
IC-NO2-0.2X-1 100 mL
NO2 (Nitrite) 20 µg/mL NO3 (Nitrate) 50 µg/mL IC-MAN-14-R2-1 $ 85 / 100 mL
PO4 (Phosphate) 50 µg/mL Water Matrix 6 comps.
SO4 (Sulfate) 50 µg/mL F (Fluoride) 20 µg/mL
IC-NO2-0.5X-1 100 mL Cl (Chloride) 30 µg/mL
Anion Mix #6 Br (Bromide) 100 µg/mL
NO2 (Nitrite) 50 µg/mL
IC-MAN-06-SET $ 100 / 2 x 100 mL N-NO3 (Nitrogen-Nitrate) 100 µg/mL
IC-MAN-06-R1-1 $ 85 / 100 mL
P-PO4 (Phosphorus-Phosphate) 150 µg/mL
Water Matrix 6 comps.
IC-MAN-CAL-SET $ 395 / 9 x 100 mL SO4 (Sulfate) 150 µg/mL
F (Fluoride) 1 µg/mL
Contains one each of: IC-NO2-N-1X-1 $ 15 / 100 mL
Cl (Chloride) 5 µg/mL
CLP-BLW-5 (500 mL) N-NO2 (Nitrogen-Nitrite) 100 µg/mL
Br (Bromide) 5 µg/mL
NO3 (Nitrate) 5 µg/mL IC-MAN-07-SET IC-MAN-09-SET
PO4 (Phosphate) 5 µg/mL IC-MAN-08-SET IC-MAN-10-SET
SO4 (Sulfate) 10 µg/mL Don't see the solution you need ?
Technical Note
IC-NO2-0.05X-1 100 mL Use our Custom Quotation FAX Form in the
NO2 (Nitrite) 5 µg/mL This Ready-to-Use set of
standards can be used to back of the catalog and take advantage of
Technical Note generate a 5 point calibration our technical experience to help you
curve (including blank).
In order to enhance the shelf life and formulate the solutions for your problems.
long term stability of our IC products.
AccuStandard has split the Nitrite out
of mixes that contain Nitrate.
Kit Price SAVE 25% 100 mL IC-CAT-KIT-1X-1 $ 75 IC-CAT-KIT-2X-1 $ 130 IC-CAT-KIT-10X-1 $ 235
Kit = one bottle of each analyte 8 x 100 mL 8 x 100 mL 8 x 100 mL
IC-CA-1X-1 IC-NH4-1X-1 IC-CA-2X-1 IC-NH4-2X-1 IC-CA-10X-1 IC-NH4-10X-1
IC-MG-1X-1 IC-K-1X-1 IC-MG-2X-1 IC-K-2X-1 IC-MG-10X-1 IC-K-10X-1
IC-NA-1X-1 IC-LI-1X-1 IC-NA-2X-1 IC-LI-2X-1 IC-NA-10X-1 IC-LI-10X-1
IC-BA-1X-1 IC-SR-1X-1 IC-BA-2X-1 IC-SR-2X-1 IC-BA-10X-1 IC-SR-10X-1
Kit Price SAVE 25% 500 mL IC-CAT-KIT-1X-5 $ 285 IC-CAT-KIT-2X-5 $ 315 IC-CAT-KIT-10X-5 $ 365
Kit = one bottle of each analyte 8 x 500 mL 8 x 500 mL 8 x 500 mL
IC-CA-1X-5 IC-NH4-1X-5 IC-CA-2X-5 IC-NH4-2X-5 IC-CA-10X-5 IC-NH4-10X-5
IC-MG-1X-5 IC-K-1X-5 IC-MG-2X-5 IC-K-2X-5 IC-MG-10X-5 IC-K-10X-5
IC-NA-1X-5 IC-LI-1X-5 IC-NA-2X-5 IC-LI-2X-5 IC-NA-10X-5 IC-LI-10X-5
IC-BA-1X-5 IC-SR-1X-5 IC-BA-2X-5 IC-SR-2X-5 IC-BA-10X-5 IC-SR-10X-5
Ca (Calcium) 1000 µg/mL K (Potassium) 200 µg/mL Ca (Calcium) 100 µg/mL NH4 (Ammonium) 3 µg/mL
NH4 (Ammonium) 400 µg/mL Na (Sodium) 200 µg/mL NH4 (Ammonium) 100 µg/mL K (Potassium) 6 µg/mL
Mg (Magnesium) 200 µg/mL Li (Lithium) 50 µg/mL Na (Sodium) 50 µg/mL Na (Sodium) 3 µg/mL
Li (Lithium) 10 µg/mL Li (Lithium) 0.5 µg/mL
78 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Ion Chromatography
IC
IC
Water Matrix 500 mL IC-FORM-1X-5 55 IC-FORM-10X-5 70
Acetate 100 mL IC-ACET-1X-1 $ 15 IC-ACET-10X-1 $ 45
Water Matrix 500 mL IC-ACET-1X-5 55 IC-ACET-10X-5 70
Oxalate 100 mL IC-OXAL-1X-1 $ 15 IC-OXAL-10X-1 $ 45
Water Matrix 500 mL IC-OXAL-1X-5 55 IC-OXAL-10X-5 70
Chlorate 100 mL IC-CHLR-1X-1 $ 15 IC-CHLR-10X-1 $ 45
Water Matrix 500 mL IC-CHLR-1X-5 55 IC-CHLR-10X-5 70
Chromate 100 mL IC-CHRM-1X-1 $ 15 IC-CHRM-10X-1 $ 45
Water Matrix 500 mL IC-CHRM-1X-5 55 IC-CHRM-10X-5 70
Custom Formulations
IC
AccuStandard offers over 30,000 different standards, and if you can't find the specific standard you need, we will prepare a custom
formulation. Our custom organic and inorganic standards are a fast, economical way to address your unique requirements. To
make an inquiry for Custom Quotes visit our website.
You can also Email your requirements to techservice@accustandard.com or Fax us at 203-786-5287. Please include the following
information: List of analytes and concentrations, Solvent or matrix, Quantity required (milliliters), Packaging unit size (milliliters
per ampule, bottle, or vial).
Also available: OEM Standards - Privately labeled standards manufactured and tested to your specifications.
80
LUFT/LUST Standards
State Methods
Alaska 82-84 Massachusetts 87-88
GRO Hydrocarbons EPH
DRO Hydrocarbons VPH
RRO Hydrocarbons Mississippi 86
Arizona 85 DRO
Diesel Range Multi-State 86
California 85 Hydrocarbon Window Defining
Gasoline Pensylvania 89
Connecticut 85 Storage Tank Monitoring Standards
Extractable TPH Tennessee 86
Florida 86 DRO
FTRPH Texas 89
Method 1005 (PST)
Washington 90-91
VPH
EPH
Wisconsin 91
Gasoline Range Hydrocarbons
LUFT/LUST
TPH Pattern Recognition Standards 92-93
Weathered LUFT/LUST Fuel Standards 93
Gasoline Range HC Analysis (CA, PA, WI) 94
Diesel Range HC Analysis 95
ASTM Method D-2887 95
Complete Hydrocarbon Analysis 95
Proficiency Test Samples 96
Method 1664, Oil, Grease & TPH Analysis 97
Methods 413.2, 418.1 & TPH Analysis 97
Method 8440 TPH Analysis 97 LUFT/LUST
Method 1004 Alcohol Oxidation Products in Engine Exhaust 98
ASTM E-1387 and E-1618 for Fire Debris Analysis 98
Skinner List Refinery Waste (ASTM#E1387) 98
NEW
Gasoline Calibration Mix Version 4/02
Surrogate Control Standard AK-101-GSC-R1 $ 25 / 1 x 1 mL
AK-101.0-SS $ 10 / 1 x 1 mL AK-101-GSC-R1-PAK SAVE 20% $ 100 / 5 x 1 mL
AK-101.0-SS-PAK SAVE 20% $ 40 / 5 x 1 mL Equal parts by weight of each
50 µg/mL each in MeOH
AK-101.0-SS-10X $ 20 / 1 x 1 mL Gasoline - Regular, unleaded
AK-101.0-SS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL Gasoline - Plus, unleaded
500 µg/mL each in MeOH Gasoline - Premium, unleaded
AK-101.0-SS-100X $ 20 / 1 x 1 mL
AK-101.0-SS-100X-PAK SAVE 20% $ 80 / 5 x 1 mL
5,000 µg/mL each in MeOH 2 comps. Internal Standard
AK-101.0-IS-10X $ 20 / 1 x 1 mL
p-Bromofluorobenzene a,a,a-Trifluorotoluene AK-101.0-IS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL
2.0 mg/mL in MeOH
1-Chloro-4-fluorobenzene
Alaska Method Determination of Aromatic & Aliphatic Hydrocarbons in Gasoline Range Organics
LUFT/LUST
82 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT/LUST
LUFT/LUST Standards Alaska
State Methods
Diesel Calibration Composite Mixture (low sulfur) Stock Concentrate Diesel Calibration
AK-102.0-DCS $ 25 / 1 x 1 mL
AK-102.0-DCS-PAK SAVE 20% $ 100 / 5 x 1 mL
Composite Mixture
Total 5.0 mg/mL in CH2Cl2 3 comps. AK-102.0-DCS-R1-10X $ 40 / 1 x 1 mL
AK-102.0-DCS-R1-10X-PAK SAVE 20% $ 160 / 5 x 1 mL
Diesel Fuel, Arctic (1.66 mg/mL) #2 Diesel - extra Low Sulfur (1.67 mg/mL) Total 50.0 mg/mL in CH2Cl2 3 comps.
#1 Diesel - Low Sulfur (1.67 mg/mL)
Diesel Fuel, Arctic (16.6 mg/mL) #2 Diesel - Conventional (16.7 mg/mL)
AK-102.0-DCS-10X $ 40 / 1 x 1 mL #1 Diesel - Low Sulfur (16.7 mg/mL)
AK-102.0-DCS-10X-PAK SAVE 20% $ 160 / 5 x 1 mL
Total 50.0 mg/mL in CH2Cl2 3 comps.
Diesel Fuel, Arctic (16.6 mg/mL) #2 Diesel - extra Low Sulfur (16.7 mg/mL)
Laboratory Control Standard
#1 Diesel - Low Sulfur (16.7 mg/mL) AK-102.0-LCS-R1-10X $ 20 / 1 x 1 mL
AK-102.0-LCS-R1-10X-PAK SAVE 20% $ 80 / 5 x 1 mL
50.0 mg/mL in Acetone
Laboratory Control Standard (low sulfur) #2 Diesel - Conventional
AK-102.0-LCS $ 10 / 1 x 1 mL
AK-102.0-LCS-PAK SAVE 20% $ 40 / 5 x 1 mL
5.0 mg/mL in Acetone Technical Note
AK102.0-LCS-10X $ 20 / 1 x 1 mL
AK-102.0-LCS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL The Laboratory Control Standard was prepared from an
50.0 mg/mL in Acetone independent source of material than what was used in the Diesel
#2 Diesel - extra Low Sulfur Calibration Composite mix.
Technical Note
AccuStandard originally formulated the Diesel Calibration Composite Mix and Laboratory Control Standard using two independent sources
of #2 Diesel as required by the Alaskan method. Unfortunately, the chromatographic patterns for the #2 diesel sources (conventional &
extra low sulfur) are different.
We have actively sought out and obtained independent sources of each type of #2 diesel to insure similar chromatographic patterns . We
recommend that when a customer is analyzing the Diesel Calibration Composite and Laboratory Control standard that the client orders
AK-102.0-DCS & AK-102.0-LCS products together to obtain similar chromatographic patterns for #2 diesel extra low sulfur patterns and
AK-102.0-DCS-R1-10X & AK-102.0-LCS-R1-10X products to obtain similar chromatographic patterns for #2 Diesel conventional patterns.
We believe most laboratories performing the Alaskan DRO analysis will find the #2 Diesel conventional chromatographic pattern more
closely resembles typical Diesel samples drawn from environmental sites.
Alaska Method Determination of Aromatic & Aliphatic Hydrocarbons in Diesel Range Organics
AK102AA DRO Standard AK102/103AA Retention Time AK102/103AA Surrogate Standard
AK-102AA-DRO $ 40 / 1 x 1 mL Marker Standard AK-102/103AA-SS $ 35 / 1 x 1 mL
AK-102AA-DRO-PAK SAVE 20% $ 160 / 5 x 1 mL AK-102/103AA-SS-PAK SAVE 20% $ 140 / 5 x 1 mL
AK-102/103AA-RT $ 25 / 1 x 1 mL
2000 µg/mL each in CH2Cl2 10 comps. 1000 µg/mL each in CH2Cl2 3 comps.
AK-102/103AA-RT-PAK $ 100 / 5 x 1 mL
n-Undecane Naphthalene 50 µg/mL each in CH2Cl2 3 comps.
Squalane
n-Pentadecane Acenaphthene o-Terphenyl
n-Heptadecane Fluorene n-Decane 5,6,7,8-Tetrahydro-1-naphthol
n-Octadecane Pyrene n-Pentacosane
n-Tetracosane Anthracene n-Hexatriacontane
AK-103.0-RCS-10X $ 40 / 1 x 1 mL
AK-103.0-RCS-10X-PAK SAVE 20% $ 160 / 5 x 1 mL Surrogate Control Standard
Total 50.0 mg/mL in CH2Cl2 3 comps.
AK-103.0-SS $ 20 / 1 x 1 mL
SAE 30W Motor Oil (16.6 mg) AK-103.0-SS-PAK SAVE 20% $ 80 / 5 x 1 mL
SAE 40W Motor Oil (16.7 mg) 500 µg/mL in Acetone
SAE 50W Motor Oil (16.7 mg) AK-103.0-SS-10X $ 30 / 1 x 1 mL
AK-103.0-SS-10X-PAK SAVE 20% $ 120 / 5 x 1 mL
5.0 mg/mL in THF : Acetone (1:3)
n-Triacontane-d62
Alaska Method Determination of Aromatic and Aliphatic Hydrocarbons in Residual Range Organics
84 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT/LUST Standards LUFT/LUST
Arizona
California
State Methods Connecticut
Arizona Method Determination of Diesel Range and Oil Range Organic Hydrocarbons
California Method
California - Gasoline Range Hydrocarbons Oxygenate Gasoline Additive Standard
S-603A-10X $ 25 / 1 x 1 mL OGAD-001 $ 30 / 1 x 1 mL
S-603A-10X-PAK SAVE 25% $ 90 / 5 x 1 mL OGAD-001-PAK SAVE 20% $ 120 / 5 x 1 mL
2.0 mg/mL each in MeOH 7 comps. At stated conc. in MeOH 5 comps.
Florida Method Total Recoverable Petroleum Hydrocarbon (FTRPH) Standard & Surrogates
Surrogate Standards
DRH-SS $ 30 / 1 x 1 mL GRH-SS $ 30 / 1 x 1 mL
DRH-SS-PAK SAVE 20% $ 120 / 5 x 1 mL GRH-SS-PAK SAVE 20% $ 120 / 5 x 1 mL
5.0 mg/mL in THF 2.0 mg/mL in Acetone
Technical Note
AccuStandard offers a hydrocarbon window defining standard with
the C8 to C40 odd and even alkanes. Use of this one standard should
meet the numerous state-to-state variations for hydrocarbon
validation and reporting. As an added benefit, AccuStandard has
included Pristane and Phytane in the formulation. Again, use of this
one standard can meet numerous LUFT/LUST programs requiring
that the C17 (Pristane) and C18 (Phytane) ratio be used to estimate
subsurface degradation of fuel oil spills.
86 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT/LUST
LUFT/LUST Standards Massachusetts
5-alpha Androstane
Benzene (5.0 mg/mL) n-Pentane (10.0 mg/mL) Benzene (500 µg/mL) n-Nonane (1,000 µg/mL)
Ethylbenzene (5.0 mg/mL) Toluene (15.0 mg/mL) 2,5-Dibromotoluene(Surrogate) (1,000 µg/mL) n-Pentane (1,000 µg/mL)
Isooctane (15.0 mg/mL) 1,2,4-Trimethylbenzene (10.0 mg/mL) Ethylbenzene (500 µg/mL) Toluene (1,500 µg/mL)
2-Methylpentane (15.0 mg/mL) o-Xylene (10.0 mg/mL) Isooctane (1,500 µg/mL) 1,2,4-Trimethylbenzene (1,000 µg/mL)
MtBE (15.0 mg/mL) m-Xylene (10.0 mg/mL) 2-Methylpentane (1,500 µg/mL) o-Xylene (1,000 µg/mL)
Naphthalene (10.0 mg/mL) p-Xylene (10.0 mg/mL) MtBE (1,500 µg/mL) m-Xylene (1,000 µg/mL)
n-Nonane (10.0 mg/mL) Naphthalene (1,000 µg/mL) p-Xylene (1,000 µg/mL)
2,5-Dibromotoluene using one AccuStandard primary dilution standard that includes the
surrogate.
VPH Matrix Spike Simultaneous BTEX / Gasoline QA/QC
GRH-004-MS $ 15 / 1 x 1 mL AccuStandard's QA/QC department has certified the benzene,
GRH-004-MS-PAK $ 60 / 5 x 1 mL toluene, ethyl benzene and xylene concentrations in our unleaded
50 µg/mL each in MeOH 8 comps. gasoline standard (GA-001-20X-BTEX). Use of this standard allows
GRH-004-MS-10X $ 25 / 1 x 1 mL the analytical chemist in a single injection to verify that the QA/QC
GRH-004-MS-10X-PAK $ 100 / 5 x 1 mL requirements are being met for the BTEX analytes as well as the
500 µg/mL each in MeOH 8 comps. gasoline.
GRH-004-MS-100X $ 25 / 1 x 1 mL AccuStandard's Product Development Team continues to look for
GRH-004-MS-100X-PAK $ 100 / 5 x 1 mL innovative approaches to save the analytical laboratory time and
5,000 µg/mL each in MeOH 8 comps. money.
Benzene Naphthalene m-Xylene
Ethylbenzene Toluene p-Xylene
MtBE o-Xylene
88 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT/LUST Standards LUFT/LUST
Penn
Texas
State Methods
Pennsylvania Method Storage Tank Site Closure & Monitoring Petroleum Standards
Technical Notes
Texas Method 1005 Rev. 03 and 1006
Over 22,000 notifications of leaking petroleum storage tanks have been received by the Texas Natural Resource Conservation Commission. At least 8000 of these leaks have
affected groundwater resulting in the testing and monitoring of the site. The capability to test for TPH concentration and identify the petrochemical product offers analytical
laboratories additional sources of revenue.
New State specific methods have been proposed and promulgated to determine the Total concentration of Petroleum Hydrocarbons (TPH). AccuStandard continues to support
the analytical community by developing these new formulations to meet both TNRCC method 1005 Rev. 3.0 and 1006. Additionally, QA/QC and Proficiency Testing samples are
now available to monitor sample handling/testing procedures or to receive certification to perform TPH analysis.
These new standards are in ready to use calibration curves, cost effective bulk quantities, and convenient concentrations to simplify the instrument calibration procedures.
VPH Solution VPH Primary Dilution Standard Stock Concentrate VPH Solutions
WA-VPH $ 30 / 1 x 1 mL with Surrogate WA-VPH-10X $ 30 / 1 x 1 mL
WA-VPH-PAK SAVE 20% $ 120 / 5 x 1 mL WA-VPH-10X-PAK SAVE 20% $ 120 / 5 x 1 mL
WA-VPH-10X-SS $ 35 / 1 x 1 mL
200 µg/mL each in MeOH 15 comps. 2,000 µg/mL each in MeOH 15 comps.
WA-VPH-10X-SS-PAKSAVE 20% $ 140 / 5 x 1 mL
2,000 µg/mL each in MeOH 16 comps. WA-VPH-100X $ 35 / 1 x 1 mL
Benzene n-Hexane
WA-VPH-100X-PAK SAVE 20% $ 140 / 5 x 1 mL
Ethylbenzene n-Octane
Benzene n-Octane 20.0 mg/mL each in MeOH 15 comps.
Toluene n-Decane
Ethylbenzene n-Decane
o-Xylene n-Dodecane
Toluene n-Dodecane Benzene n-Hexane
m-Xylene 1-Methylnaphthalene
o-Xylene 1-Methylnaphthalene Ethylbenzene n-Octane
p-Xylene Naphthalene
m-Xylene Naphthalene Toluene n-Decane
MtBE 1,2,3-Trimethylbenzene
p-Xylene 1,2,3-Trimethylbenzene o-Xylene n-Dodecane
n-Pentane
MtBE 2,5-Dibromotoluene (surrogate) m-Xylene 1-Methylnaphthalene
n-Pentane p-Xylene Naphthalene
n-Hexane MtBE 1,2,3-Trimethylbenzene
n-Pentane
VPH Matrix Spike VPH Surrogate Standard VPH Retention Time Marker
WA-VPH-MS $ 25 / 1 x 1 mL WA-VPH-RT $ 20 / 1 x 1 mL
GRH-004-SS $ 10 / 1 x 1 mL
WA-VPH-MS-PAK SAVE 20% $ 100 / 5 x 1 mL WA-VPH-RT-PAK SAVE 20% $ 80 / 5 x 1 mL
GRH-004-SS-PAK SAVE 20% $ 40 / 5 x 1 mL
Varied conc. in MeOH 11 comps. 2,000 µg/mL each in MeOH 6 comps.
50 µg/mL in MeOH
Benzene (60 µg/mL) GRH-004-SS-10X $ 20 / 1 x 1 mL n-Pentane n-Decane
Ethylbenzene (60 µg/mL) GRH-004-SS-10X-PAK SAVE 20% $ 80 / 5 x 1 mL n-Hexane n-Dodecane
MTBE (180 µg/mL) 500 µg/mL in MeOH n-Octane n-Tridecane
Naphthalene (360 µg/mL)
GRH-004-SS-100X $ 20 / 1 x 1 mL
n-Nonane (200 µg/mL)
GRH-004-SS-100X-PAKSAVE 20% $ 80 / 5 x 1 mL
n-Pentane (600 µg/mL)
Toluene (60 µg/mL)
5,000 µg/mL in MeOH 1,2,3-Trimethylbenzene Standard
1,2,3-Trimethylbenzene (60 µg/mL) V-028S-D-10X $ 20 / 1 x 1 mL
m-Xylene (60 µg/mL) 2,5-Dibromotoluene V-028S-D-10X-PAK SAVE 20% $ 80 / 5 x 1 mL
p-Xylene (60 µg/mL) 1000 µg/mL each in CH2Cl2
o-Xylene (60 µg/mL)
1,2,3-Trimethylbenzene
90 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT/LUST Standards LUFT/LUST
Washington
Wisconsin
State Methods
EPH Aromatic/PAH Standard EPH Aliphatic Check Mix EPH Fractionation Check Solution
WA-EPH-10X $ 75 / 1 x 1 mL WA-EPH-ALI $ 20 / 1 x 1 mL WA-EPH-FCS $ 45 / 1 x 1 mL
WA-EPH-10X-PAK SAVE 20% $ 300 / 5 x 1 mL WA-EPH-ALI-PAK SAVE 20% $ 80 / 5 x 1 mL WA-EPH-FCS-PAK SAVE 20% $ 180 / 5 x 1 mL
1.0 mg/mL each in CH2Cl2 18 comps. 1.0 mg/mL each in CH2Cl2 5 comps. 25 µg/mL each in Hexane 24 comps.
Wisconsin Method
Wisconsin DNR - Gasoline Range Hydrocarbons
GRH-003S $ 35 / 1 x 1 mL
GRH-003S-PAK SAVE 20% $ 140 / 5 x 1 mL
2.0 mg/mL each in MeOH 10 comps.
Benzene 1,2,4-Trimethylbenzene
Ethylbenzene 1,3,5-Trimethylbenzene
MtBE o-Xylene
Naphthalene m-Xylene
Toluene p-Xylene
Motor Fuels & Lubricating Oils Set Aviation Fuels & Oils Set
TPH-001-SET $ 180 / 11 x 1 mL (Set includes Cat. No.'s listed in Bold) TPH-003-SET $ 160 / 10 x 1 mL (Set includes Cat. No.'s listed in Bold)
Conc. 1 mL Conc. 1 mL
Description (mg/mL) Solv. Cat. No. Price Description (mg/mL) Solv. Cat. No. Price
Regular unleaded 0.5 MeOH GA-001 $ 10 Aviation (gas) 0.5 MeOH GA-004 $ 10
20 MeOH GA-001-40X 20 Grade 100 LL 20 MeOH GA-004-40X 20
20 CH2Cl2 GA-001-D-40X 20 20 CH2Cl2 GA-004-D-40X 20
Regular leaded 0.5 MeOH GA-002 10 JP-4 Fuel 0.5 MeOH FU-010 10
20 MeOH GA-002-40X 20 20 MeOH FU-010-40X 20
20 CH2Cl2 GA-002-D-40X 20 20 CH2Cl2 FU-010-D-40X 20
Premium 0.5 MeOH GA-003 10 JP-5 Fuel 0.5 MeOH FU-012 10
20 MeOH GA-003-40X 20 20 MeOH FU-012-40X 20
20 CH2Cl2 GA-003-D-40X 20 20 CH2Cl2 FU-012-D-40X 20
RFA Gasoline 0.5 MeOH GA-005 10 JP-7 Fuel 0.5 MeOH FU-014 10
(oxygenate free) 20 MeOH GA-005-40X 20 20 MeOH FU-014-40X 20
20 CH2Cl2 GA-005-D-40X 20 20 CH2Cl2 FU-014-D-40X 20
#2 Diesel 0.5 MeOH FU-009 10 JP-8 Fuel 0.5 MeOH FU-015 10
(conventional) 20 MeOH FU-009-40X 20 20 MeOH FU-015-40X 20
20 CH2Cl2 FU-009-D-40X 20 20 CH2Cl2 FU-015-D-40X 20
#1 Diesel 0.5 MeOH FU-013 10 JP-10 Fuel 0.5 MeOH FU-022 10
(low sulfur) 20 MeOH FU-013-40X 20 (Cruise Missile) 20 MeOH FU-022-40X 20
20 CH2Cl2 FU-013-D-40X 20 20 CH2Cl2 FU-022-D-40X 20
#2 Diesel 0.5 MeOH FU-017 10 JP-TS 0.5 MeOH FU-016 10
(extra low sulfur) 20 MeOH FU-017-40X 20 20 MeOH FU-016-40X 20
20 CH2Cl2 FU-017-D-40X 20 20 CH2Cl2 FU-016-D-40X 20
Arctic Diesel 0.5 MeOH FU-023 10 Jet Fuel (type 1) 0.5 MeOH FU-011 10
20 MeOH FU-023-40X 20 20 MeOH FU-011-40X 20
20 CH2Cl2 FU-023-D-40X 20 20 CH2Cl2 FU-011-D-40X 20
SAE 30 W motor oil 0.5 Hexane FU-018-H 10 Turbine (Jet A) Fuel 0.5 MeOH FU-006 10
20 Hexane FU-018-H-40X 20 20 MeOH FU-006-40X 20
20 CH2Cl2 FU-018-D-40X 20 20 CH2Cl2 FU-006-D-40X 20
SAE 40 W motor oil 0.5 Hexane FU-019-H 10 Hydraulic oil 0.5 Hexane FU-020-H 10
20 Hexane FU-019-H-40X 20 20 Hexane FU-020-H-40X 20
20 CH2Cl2 FU-019-D-40X 20 20 CH2Cl2 FU-020-D-40X 20
SAE 50 W motor oil 0.5 Hexane FU-021-H 10
20 Hexane FU-021-H-40X 20
20 CH2Cl2 FU-021-D-40X 20
Household & Industrial Solvent Set
TPH-004-SET $ 80 / 5 x 1 mL (Set includes Cat. No.'s listed in Bold)
Heating Fuel Oils Set Conc. 1 mL
TPH-002-SET $ 115 / 7 x 1 mL (Set includes Cat. No.'s listed in Bold) Description (mg/mL) Solv. Cat. No. Price
92 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT/LUST Standards LUFT/LUST TPH
Weathered
Fuels
Benzene Toluene
Chlorobenzene o-Xylene
Surrogate Standard 1,2-Dichlorobenzene p-Xylene
GARH-SS $ 20 / 1 x 1 mL 1,3-Dichlorobenzene m-Xylene
2.5 mg/mL in Acetone 1,4-Dichlorobenzene MtBE
4-Bromofluorobenzene Ethylbenzene
Benzene 1,2,4-Trimethylbenzene
Certified BTEX in Unleaded Gasoline Ethylbenzene 2,2,4-Trimethylpentane
GA-001-20X-BTEX $ 55 / 1 x 1 mL Heptane o-Xylene
10.0 mg/mL in MeOH 2-Methyl pentane m-Xylene
Toluene p-Xylene
Regular unleaded gasoline
94 Quality System is Certified to comply with the International ISO 9001 Quality Standard
LUFT/LUST Standards LUFT/LUST DRH
Diesel Range
Calibration Solution
DRH-002S $ 45 / 1 x 1 mL
FTRPH Calibration/Window Defining Standard
At stated conc. in CS2 17 comps. DRH-FTRPH $ 35 / 1 x 1 mL
DRH-FTRPH-PAK SAVE 15% $ 150 / 5 x 1 mL
Hexane (600 µg/mL) Dodecane (1,200 µg/mL) Octacosane (100 µg/mL) 500 µg/mL each in Hexane 17 comps.
Heptane (600 µg/mL) Tetradecane (1,200 µg/mL) Dotriacontane (100 µg/mL)
Octane (800 µg/mL) Hexadecane (1,000 µg/mL) Hexatriacontane (100 µg/mL) n-Octane n-Octadecane n-Octacosane n-Hexatriacontane
Nonane (800 µg/mL) Octadecane (500 µg/mL) Tetracontane (100 µg/mL) n-Decane n-Eicosane n-Triacontane n-Octatriacontane
Decane (1,200 µg/mL) Eicosane (200 µg/mL) Tetratetracontane (100 µg/mL) n-Dodecane n-Docosane n-Dotriacontane n-Tetracontane
Undecane (1,200 µg/mL) Tetracosane (200 µg/mL) n-Tetradecane n-Tetracosane n-Tetratriacontane
n-Hexadecane n-Hexacosane
96 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Method 1664
LUFT/LUST Standards 413 & 418
8440
Oil, Grease & TPH
Corn Oil
Method 1004 Carbonyl Compounds as DNPH deriv. by HPLC Skinner List for Refinery Waste
Carbonyl Compounds as DNPH deriv. by HPLC Semi-Volatiles
California Air Resources Board Method 1004 Base/Neutral Extractables
M-1004 $ 25 / 1 x 1 mL M-005B 0.2 mg/mL each in CH2Cl2 $ 150 / 1 x 1 mL
At stated conc. in AcCN 13 comps. M-005B-PAK 0.2 mg/mL each in CH2Cl2 SAVE 20% $ 600 / 5 x 1 mL
M-1004-10X $ 35 / 1 x 1 mL M-005B-10X 2.0 mg/mL each in CH2Cl2 $ 200 / 1 x 1 mL
At 10 times the stated conc. in AcCN 13 comps.
M-005B-10X-PAK 2.0 mg/mL each in CH2Cl2 SAVE 20% $ 1,000 / 5 x 1 mL
27 comps.
Carbonyl Compound DNPH Derivative
Acetaldehyde (3.0 µg/mL) (15.3 µg/mL) Anthracene 7,12-Dimethylbenz[a]anthracene
Acetone (3.0 µg/mL) (12.3 µg/mL) Benzo[a]anthracene Dimethyl phthalate
Acrolein (3.0 µg/mL) (12.7 µg/mL) Benzo[b]fluoranthene Di-n-butyl phthalate
Benzaldehyde (3.0 µg/mL) (8.1 µg/mL) Benzo[k]fluoranthene Di-n-octyl phthalate
2-Butanone (MEK) (3.0 µg/mL) (10.5 µg/mL) Benzo[a]pyrene Indene
n-Butyraldehyde (3.0 µg/mL) (10.5 µg/mL) bis(2-Ethylhexyl)phthalate Fluoranthene
Crotonaldehyde (3.0 µg/mL) (10.7 µg/mL) Butyl benzyl phthalate 6-Methylchrysene
Formaldehyde (3.0 µg/mL) (21.0 µg/mL) Chrysene 1-Methylnaphthalene
Hexanal (3.0 µg/mL) (8.4 µg/mL) Dibenz[a,h]acridine Naphthalene
Methacrolein (3.0 µg/mL) (10.7 µg/mL) Dibenz[a,h]anthracene Phenanthrene
Propionaldehyde (3.0 µg/mL) (12.3 µg/mL) o-Dichlorobenzene Pyrene
m-Tolualdehyde (3.0 µg/mL) (7.5 µg/mL) m-Dichlorobenzene Pyridine
Valeraldehyde (3.0 µg/mL) (9.3 µg/mL) p-Dichlorobenzene Quinoline
Diethyl phthalate
CAR-DNPH $ 20 / 1 x 1 mL
At stated conc. in AcCN as DNPH derivatives 7 comps.
Acid Extractables
M-005A 0.2 mg/mL each in CH2Cl2 $ 35 / 1 x 1 mL
Acetaldehyde (1000 µg/mL) Butyraldehyde (500 µg/mL) M-005A-PAK 0.2 mg/mL each in CH2Cl2 SAVE 20% $ 140 / 5 x 1 mL
Acetone (500 µg/mL) Formaldehyde (1500 µg/mL) M-005A-10X 2.0 mg/mL each in CH2Cl2 $ 40 / 1 x 1 mL
Acrolein (500 µg/mL) Propionaldehyde (500µg/mL) M-005A-10X-PAK 2.0 mg/mL each in CH2Cl2 SAVE 20% $ 160 / 5 x 1 mL
Benzaldehyde (500 µg/mL)
8 comps.
o-Cresol 4-Nitrophenol
m-Cresol Phenol
Reference Gas Oil Sample p-Cresol Thiophenol
RGS-001 $ 20 / 1 x 1 mL 2,4-Dimethylphenol
2,4-Dinitrophenol
Hydrocarbon Mixture
(boiling point range 250-850 °F)
Volatiles
M-005V 0.2 mg/mL each in MeOH $ 35 / 1 x 1 mL
M-005V-PAK 0.2 mg/mL each in MeOH SAVE 20% $ 140 / 5 x 1 mL
ASTM E-1387 Resolution Check Mix for Fire Debris Analysis M-005V-10X 2.0 mg/mL each in MeOH $ 40 / 1 x 1 mL
M-005V-10X-PAK 2.0 mg/mL each in MeOH SAVE 20% $ 160 / 5 x 1 mL
14 comps.
Resolution Check Mix
ASTM-E1387 $ 30 / 1 x 1 mL Benzene Ethylene dibromide
ASTM-E1387-PAK SAVE 20% $ 120 / 5 x 1 mL Carbon disulfide Methyl ethyl ketone
2.0 mg/mL each in CH2Cl2 13 comps. Chlorobenzene Styrene
Chloroform Toluene
Decane Hexadecane Tetradecane
1,2-Dichloroethane o-Xylene
Dodecane Hexane Toluene
1,4-Dioxane m-Xylene
Eicosane Octadecane 1,2,4-Trimethylbenzene
Ethyl benzene p-Xylene
2-Ethyltoluene Octane p-Xylene
3-Ethyltoluene
LUFT/LUST
98 Quality System is Certified to comply with the International ISO 9001 Quality Standard
Catalog Number Index
AA01N-1 73 AA22H-1 73 AA42H-1 74 AA62N-10X-20ML 75 AK-102AA-DRO 84
AA01N-5 73 AA22H-10X-20ML 73 AA42H-10X-20ML 74 AA62N-25X-20ML 75 AK-102AA-DRO-PAK 84
AA01N-1 26 AA22H-25X-20ML 73 AA42H-25X-20ML 74 AA62N-5 75 AK-103.0-LCS 84
AA01N-10X-20ML 73 AA22H-5 73 AA42H-5 74 AA63H-1 75 AK-103.0-LCS-5X 84
AA01N-25X-20ML 73 AA23N-1 74 AA43N-1 74 AA63H-5 75 AK-103.0-LCS-5X-PAK 84
AA01N-5 26 AA23N-10X-20ML 74 AA43N-5 74 AA63N-10X-20ML 75 AK-103.0-LCS-PAK 84
AA02N-1 73 AA23N-25X-20ML 74 AA43N-10X-20ML 74 AA63N-25X-20ML 75 AK-103.0-RCS 84
AA02N-5 73 AA23N-5 74 AA43N-25X-20ML 74 AA64W-1 75 AK-103.0-RCS-PAK 84
AA02W-10X-20ML 73 AA24N-1 74 AA44N-1 74 AA64W-10X-20ML 75 AK-103.0-SS-PAK 84
AA03N-10X-20ML 73 AA24N-10X-20ML 74 AA44N-10X-20ML 74 AA64W-5 75 AK-103AA-RRO 84
AA03N-25X-20ML 73 AA24N-25X-20ML 74 AA44N-25X-20ML 74 AA65W-1 75 AK-103AA-RRO-PAK 84
AA03N-1 73 AA24N-5 74 AA44N-5 74 AA65W-10X-20ML 75 ASTM-D2887 14
AA03N-5 73 AA25N-1 74 AA45W-1 74 AA65W-5 75 ASTM-D2887 95
AA04N-1 73 AA25N-10X-20ML 74 AA45W-10X-20ML 74 AA66N-1 75 ASTM-D3710 20
AA04N-5 73 AA25N-25X-20ML 74 AA45W-25X-20ML 74 AA66N-5 75 ASTM-D3710-PAK 20
AA04N-10X-20ML 73 AA25N-5 74 AA45W-5 74 AA67N-1 26, 75 ASTM-E1387 98
AA04N-25X-20ML 73 AA26H-1 74 AA46H-1 74 AA67N-10X-20ML 75 ASTM-E1387-PAK 98
AA05N-1 73 AA26H-10X-20ML 74 AA46H-10X-20ML 74 AA67N-25X-20ML 75 ASTM-E1618 98
AA05N-10X-20ML 73 AA26H-5 74 AA46H-25X-20ML 74 AA67N-5 26, 75 ASTM-E1618-PAK 98
AA05N-5 73 AA27N-1 74 AA46H-5 74 AA68N-1 75 ASTM-FUEL-QCS-01-PAK 1,40
AA06N-1 73 AA27N-5 74 AA47N-1 74 AA68N-10X-20ML 75 ASTM-FUEL-QCS-02-PAK 1,40
AA06N-10X-20ML 73 AA27N-1 26 AA47N-10X-20ML 74 AA68N-25X-20ML 75 ASTM-P-0010-PAK 11
AA06N-25X-20ML 73 AA27N-10X-20ML 74 AA47N-25X-20ML 74 AA68N-5 75 ASTM-P-0020-PAK 11
AA06N-5 73 AA27N-25X-20ML 74 AA47N-5 74 AA69N-1 75 ASTM-P-0030 12,13
AA07W-1 73 AA27N-5 26 AA48H-1 74 AA69N-10X-20ML 75 ASTM-P-0031 13
AA07W-10X-20ML 73 AA28N-1 74 AA48H-10X-20ML 74 AA69N-25X-20ML 75 ASTM-P-0032 13
AA07W-5 73 AA28N-10X-20ML 74 AA48H-25X-20ML 74 AA69N-5 75 ASTM-P-0033 13
AA08N-1 73 AA28N-25X-20ML 74 AA48H-5 74 AA70N-1 75 ASTM-P-0034 13
AA08N-5 73 AA28N-5 74 AA49N-1 75 AA70N-10X-20ML 75 ASTM-P-0035 13
AA08N-10X-20ML 73 AA29N-1 74 AA49N-10X-20ML 75 AA70N-25X-20ML 75 ASTM-P-0036 12
AA08N-25X-20ML 73 AA29N-10X-20ML 74 AA49N-25X-20ML 75 AA70N-5 75 ASTM-P-0037 12
AA09N-1 73 AA29N-25X-20ML 74 AA49N-5 75 AA71N-1 75 ASTM-P-0038 14
AA09N-5 73 AA29N-5 74 AA50N-1 75 AA71N-10X-20ML 75 ASTM-P-0050 15
AA09N-1 26 AA30N-1 17, 74 AA50N-10X-20ML 75 AA71N-25X-20ML 75 ASTM-P-0051N-2G 56
AA09N-10X-20ML 73 AA30N-5 17, 74 AA50N-25X-20ML 75 AA71N-5 75 ASTM-P-0051N-2G 15
AA09N-25X-20ML 73 AA30N-10X-20ML 74 AA50N-5 75 AK-101.0-GCS 82 ASTM-P-0052 15
AA09N-5 26 AA30N-25X-20ML 74 AA51N-1 75 AK-101.0-GCS-BTEX 82, 90 ASTM-P-0052-PAK 15
AA11N-1 73 AA31N-1 74 AA51N-10X-20ML 75 AK-101.0-GCS-PAK 82 ASTM-P-0053N-2G 56
AA11N-10X-20ML 73 AA31N-10X-20ML 74 AA51N-25X-20ML 75 AK-101.0-IS-10X 82 ASTM-P-0053N-2G 15
AA11N-25X-20ML 73 AA31N-25X-20ML 74 AA51N-5 75 AK-101.0-IS-10X-PAK 82 ASTM-P-0061-SET 37
AA11N-5 73 AA31N-5 74 AA52W-1 26, 75 AK-101.0-LCS 82 ASTM-P-0062-SET 37
AA12N-1 73 AA32N-1 74 AA-52W-10X-20ML 75 AK-101.0-LCS-PAK 82 ASTM-P-0063-SET 37
AA12N-10X-20ML 73 AA32N-5 74 AA52W-5 26, 75 AK-101.0-NAS-10X 82 ASTM-P-0064-SET 37
AA12N-25X-20ML 73 AA32N-10X-20ML 74 AA53N-1 75 AK-101.0-NAS-10X-PAK 82 ASTM-P-0065-SET 37
AA12N-5 73 AA32N-25X-20ML 74 AA53N-10X-20ML 75 AK-101.0-SS 82 ASTM-P-0066-SET 37
AA13N-1 73 AA33N-1 74 AA53N-25X-20ML 75 AK-101.0-SS-100X 82 ASTM-P-0067-SET 37
AA13N-5 73 AA33N-5 74 AA53N-5 75 AK-101.0-SS-100X-PAK 82 ASTM-P-0068-SET 37
AA13N-10X-20ML 73 AA33N-10X-20ML 74 AA54N-1 17, 75 AK-101.0-SS-10X 82 ASTM-P-0069-SET 37
AA13N-25X-20ML 73 AA33N-25X-20ML 74 AA54N-5 17, 75 AK-101.0-SS-10X-PAK 82 ASTM-P-0070-10X 23, 40
AA14N-1 73 AA34N-1 74 AA54N-1 26 AK-101.0-SS-PAK 82 ASTM-P-0070-1X 23, 40
AA14N-5 73 AA34N-10X-20ML 74 AA54N-10X-20ML 75 AK-101AA-ARO 82 ASTM-P-0070-20X 23, 40
AA14N-10X-20ML 73 AA34N-25X-20ML 74 AA54N-25X-20ML 75 AK-101AA-ARO-PAK 82 ASTM-P-0070-2X 23, 40
AA14N-25X-20ML 73 AA34N-5 74 AA54N-5 26 AK-101-GSC-R1 82 ASTM-P-0070-4X 23, 40
AA15N-1 73 AA35W-1 74 AA55N-1 75 AK-101-GSC-R1-PAK 82 ASTM-P-0070-BL 23, 40
AA15N-10X-20ML 73 AA35W-10X-20ML 74 AA55N-10X-20ML 75 AK-102.0-DCS 83 ASTM-P-0070-SET 23, 40
AA15N-25X-20ML 73 AA35W-25X-20ML 74 AA55N-25X-20ML 75 AK-102.0-DCS-10X 83 ASTM-P-0071-01 23, 40
AA15N-5 73 AA35W-5 74 AA55N-5 75 AK-102.0-DCS-10X-PAK 83 ASTM-P-0071-02 23, 40
AA16N-1 73 AA36N-1 74 AA56W-1 75 AK-102.0-DCS-PAK 83 ASTM-P-0071-03 23, 40
AA16N-10X-20ML 73 AA36N-10X-20ML 74 AA56W-10X-20ML 75 AK-102.0-DCS-R1-10X 83 ASTM-P-0071-BL 23, 40
AA16N-25X-20ML 73 AA36N-25X-20ML 74 AA56W-25X-20ML 75 AK-102.0-DCS-R1-10X-PAK 83 ASTM-P-0071-SET 23, 40
AA16N-5 73 AA36N-5 74 AA56W-5 75 AK-102.0-IS 83 ASTM-P-0080 55
AA17N-1 73 AA37N-1 26 AA57W-1 75 AK-102.0-IS-PAK 83 ASTM-P-0080-PAK 55
AA17N-10X-20ML 73 AA37N-1 74 AA57W-10X-20ML 75 AK-102.0-LCS 83 ASTM-P-0081 55
AA17N-25X-20ML 73 AA37N-10X-20ML 74 AA57W-25X-20ML 75 AK-102.0-LCS-10X 83 ASTM-P-0081-PAK 55
AA18N-1 73 AA37N-25X-20ML 74 AA57W-5 75 AK-102.0-LCS-10X-PAK 83 ASTM-P-0082 55
AA18N-10X-20ML 73 AA37N-5 26 AA58H-1 75 AK-102.0-LCS-PAK 83 ASTM-P-0082-PAK 55
AA18N-25X-20ML 73 AA37N-5 74 AA58H-10X-20ML 75 AK-102.0-LCS-R1-10X 83 ASTM-P-0082-R1 55
AA18N-5 73 AA38W-1 74 AA59N-1 75 AK-102.0-LCS-R1-10X-PAK 83 ASTM-P-0082-R1-PAK 55
AA19N-1 73 AA38W-10X-20ML 74 AA59N-10X-20ML 75 AK-102.0-NAS-10X 83, 86 ASTM-P-0090-01 66
AA19N-10X-20ML 73 AA38W-25X-20ML 74 AA59N-25X-20ML 75 AK-102.0-NAS-10X-PAK 83, 86 ASTM-P-0090-02 66
INDEX
WM-20CST-50 59
WM-20CST-52 59
WM-20CST-53 59
WM-20CST-54 59
WM-20CST-55 59
WM-20CST-60 59
WM-20CST-63 59
WM-20CST-64 59
WM-20CST-67 59 vii
On-Line Ordering
There is an easier way to get Chemical Reference Standards
®
e-Standards from AccuStandard.com
5 Ways to Search
“e-Standards®” is the Fastest, Most Comprehensive Search Engine
with over 30,000 products.
Search by:
• Catalog Number
• Single or Multiple Components,
• Method (EPA, ASTM, etc.)
• Chemical Category (Organic, Inorganic, Petroleum, etc.)
• Other Companies’ Part Number
Log on to www.accustandard.com. and see how easy, it is.
BOOK-TPH $ 35 S-3571 $ 25
Custom Quotation Request Form
From: Company Contact _______________________________________ Send to: AccuStandard, Inc.
125 Market Street
Company Name _______________________________________ New Haven, CT 06513
USA
Phone: ( ) _______________________ Ext. __________
FAX: 203-786-5287
FAX: ( ) _______________________
Page ___ of ___
Email: ______________________________________
YOU CAN ALSO USE OUR WEB SITE TO
For Internal Use Only REQUEST CUSTOM QUOTATIONS AT
www.accustandard.com
AS Tech. Rep. __________ Product Ordering # ____________
Quote Creation Date __________ Quoted price $ ____________
Requested Quantity
No. of Comps. ____ Organic Inorganic
5 x 1 mL 1 x 500 mL
___
Product Description ________________________________________ ___ x 500 mL
10 x 1 mL
Concentration ______________________ 20 x 1 mL
other ___ x ___
Solvent / Matrix ______________________
_____________________________________________
QR-PDN-001
_____________________________________________ Rev. AUG 11 2003
Placement of Orders
Visit our website at
www.accustandard.com
Easy Ordering 24/7
Request a custom quotation
Request or download literature
Find out what’s new
Get technical information
And more...
To Order: State Account No., Order No., Cat. No., and Quantity.
Custom orders, use our Website or FAX us using the Custom Quotation Request Form ON THE PREVIOUS PAGE
Fax: 877-786-5287 (Toll Free) or Place orders 24 hours per day, 7 days a week
203-786-5287
Email: orders@accustandard.com
Shipments
Orders shipped via UPS, Federal Express, or US Mail. Where applicable, other methods of transportation will be used
in accordance with DOT regulations. A handling fee is associated with each order. Hazardous Shipping charges may
apply
Conditions of Sale
Net 30 Days - FOB New Haven, Connecticut. Prices are in US dollars and are subject to change without notice. 1.5 % finance charge on
overdue accounts will be applied.
Liability
Products listed in this catalog are for research use only. No warranty for any particular application is expressed or implied. Due to their
hazardous nature, they should be handled by trained personnel. AccuStandard's liability will be limited to replacement of product or refund
of purchase price. Notice of claims must be made within thirty (30) days from date of delivery. PRINTED ON
RECYCLED PAPER
Trade Marks and Registered Trademarks Accu-Ion Aroclors NELAP Polywax 500
The following trademarks and registered trademarks are accurate to AccuShots ASTM NIST Polywax 655
the best of our knowledge at the time of printing. Please consult AccuPAK eStandards PetroCheck Polywax 850
AccuStandard CALAMTS PetroTest Polywax 1000
individual manufacturers and other resources for specific information.
AccuStandard, Inc. PRESORTED STANDARD
125 Market St. US POSTAGE
New Haven, CT 06513 PAID
BRIDGEPORT, CT
PERMIT NO. 38
Address Service Requested
In this Catalog
100 plus ASTM Methods: Low Level Sulfur,
Wear Metals, PIONA, DHA, Oxygenates, Aromatics,
Physical Properties, LUFT/LUST (New Section)
AccuStandard, Inc.
125 Market Street
New Haven, CT 06513 ISO 9001:2000
Certificate Number: 31692
USA MEMBER