Professional Documents
Culture Documents
5~10% 7732-18-5
Water
- DI-30B :REMOVE INK
LW-N111
Characteristics and uses Solution composition and operating Packaging
conditions
1. It is specially used for hot dip chemical LW-N111 60-100g/L
degreasing of magnesium alloy. Temperature 60-80oC
2. Does not corrode the magnesium alloy
substrate
3. The penetration and emulsification ability
are strong for screw hole and blind hole
pieces, the service life is long.
4. If used with ultrasound, the effect will be Time 2-5 minutes
better
25kg/pail
LW-N112
Characteristics and uses Solution composition and operating Packaging
conditions
1. It is specially used for degreasing of LW-N112 60-100g/L
magnesium alloy. Temperature 50-70oC
2. Tolerance to high temperature, hot alkaline,
do not cause damage to the material.
3. It has strong penetration and degreasing
ability. If used with ultrasound, the effect
will be better. Time 1-3 minutes
25kg/pail
LW-N121
Characteristics and uses Solution composition and operating Packaging
conditions
1. Mainly used for magnesium alloy, can LW-N121 80-120ml/L
enhance the adhesion. Temperature 50-60oC
2. High stability and strong activation.
3. The erosion effect is good, the permeability
is strong.
25kg/pail
LW-N131
Characteristics and uses Solution composition and operating Packaging
conditions
25kg/pail
LW-N141
Characteristics and uses Solution composition and operating Packaging
conditions
1. Mainly used for chemical oxidation and LW-N141A 120-170ml/L
anodic oxidation for magnesium alloy. LW-N141B 1.5%A
2. No chromium and other heavy metals LW-N141C 1%
harmful substances, in line with ROHS PH 1.8-2.5
requirements. Temperature 40-45oC
3. The impedance of the film is low and the
electromagnetic shieling effect of the film is
good.
4. The film is uniform, gray and corrosion Time 30- 90s
resistant.
5. Spray the bottom, with good adhesion. 25kg/pail
LW-N142
Characteristics and uses Solution composition and operating Packaging
conditions
1. No chromium and other heavy metals LW-N142A 130-180ml/L
harmful substances, in line with ROHS LW-N142B 1.5%A
requirements. LW-N142C 1%
2. Designed for appearance parts and 3C
product interior components. Temperature 40-45oC
3. Salt spray test is very good.
4. The appearance is uniform and taupe.
Time 30- 90s
25kg/pail
LW-N151
Characteristics and uses Solution composition and operating Packaging
conditions
1. It is specially designed for post-treatment of LW-N151 150-200ml/L
magnesium alloy coating. Temperature 65-75oC
2. It greatly improves the Salt spray test
performance of magnesium alloy coating
3. Simple operation and maintenance, low cost
25kg/pail
LW-N211
Characteristics and uses Solution composition and operating Packaging
conditions
1. It is specially used for oil removal, film LW-N211 100-150ml/L
removal and wax removal for magnesium Temperature 60-80oC
alloy.
2. Tolerance to high temperature, alkaline, do
not cause damage to the material.
3. It has strong penetration and degreasing
ability. If used with ultrasound, the effect Time 1-5 minutes
will be better.
25kg/pail
LW-N221
Characteristics and uses Solution composition and operating Packaging
conditions
LW-N221 200-250ml/L
1. The products are non-toxic, tasteless and Temperature 50-60oC
environmentally friendly. It is easy to
operate.
2. It can disperse, emulsify and saponified a
variety of organic matter on the surface
magnesium alloy.
Time 1-3 minutes
3. The oxide film of AZ91D, AM60, AZ31 and
other magnesium alloys can be uniformly
removed without corroding the substrate.
4. If used with ultrasound, the effect will be 25kg/pail
better.
LW-N231
Characteristics and uses Solution composition and operating Packaging
conditions
LW-N231 200-250ml/L
1. It is dedicated to AZ91D, AM60 and AZ31 Temperature 25-40oC
of magnesium alloy.
2. Chromium-free and environmentally
friendly, is a low- temperature chemical
surface light brightener.
3. The solution is stable and does not corrode Time 90-120 s
the substrate
25kg/pail
LW-N241
Characteristics and uses Solution composition and operating Packaging
conditions
LW-N241 200-250ml/L
1. Dedicated to surface adjustment for Temperature 25-40oC
magnesium alloy, more suitable for AZ91D,
AM60, AZ31.
2. It can remove surface residues of workpiece
and low – porosity oxides to purify the
surface condition. Time 1-2 minutes
3. If used with ultrasound, the effect will be
better.
25kg/pail
LW-N251
Characteristics and uses Solution composition and operating Packaging
conditions
LW-N231 200-250ml/L
1. Dedicated to the activation for the surface of Temperature 25-40oC
magnesium alloy, do not corrode the
substrate.
2. Strong activation and can enhance the
adhesion with the substrate.
3. It is an environment-friendly activating Time 40-60 s
solution which is tasteless and non-volatile.
25kg/pail
LW-N9155
Characteristics and uses Solution composition and operating Packaging
conditions
1. Dedicated to the formation of the bottom LW-N9155A 100ml/L
layer of magnesium alloy, low temperature, LW-N9155B 150ml/L
alkaline. LW-N9155C 100ml/L
2. Deposition speed uniform, strong covering PH 6.5-7.5
ability, with the substrate with good Temperature 50-60oC
adhesion. Time 8-10 minutes
3. A stable solution and long service life.
4. No chromium and other heavy metals
harmful substances, in line with ROHS Loading
0.2-2.5 dm2/L
requirements. capacity
25kg/pail
LW-N9156
Characteristics and uses Solution composition and operating Packaging
conditions
1. The solution is stable, environmentally LW-N9156A 100ml/L
friendly and in line with ROHS LW-N9156B 150ml/L
requirements. LW-N9156C 100ml/L
2. Used in conjunction with the LW-N9155, it PH 4.2-4.8
is dedicated to magnesium alloys. Temperature 75-85oC
3. A stable solution and long service life. Time 8-10 minutes
4. The plating have a low stress.
Loading
0.2-2.5 dm2/L
capacity
25kg/pail
LW-N311
Characteristics and uses Solution composition and operating Packaging
conditions
LW-N311 100-150ml/L
1. It is specifically designed to remove wax Temperature 50-60oC
from magnesium alloys of various brands. 25kg/pail
2. Remove wax thoroughly, does not corrode
the base material, the permeability is strong. Time 3-5 minutes
3. If used with ultrasound, the effect will be
better
LW-N321
Characteristics and uses Solution composition and operating Packaging
conditions
1. It has a strong emulsifying effect and LW-N321 100-150ml/L
removes the oxide film on the surface of the Temperature 50-60oC
magnesium alloy.
2. The alkaline is moderate, especially suiable
for the oil removal magnesium alloy.
3. If used with ultrasound, the effect will be
better. Time 3-5 minutes
25kg/pail
LW-N331
Characteristics and uses Solution composition and operating Packaging
conditions
1. No chromium and other heavy metals LW-N331 100-150ml/L
harmful substances, in line with ROHS Temperature 50-60oC
requirements.
2. It can effectively remove the oxidized
material on the surface of magnesium alloy
without damaging the substrate.
3. Simple operation and maintenance, long Time 3-5 minutes
service life.
4. If used with ultrasound, the effect will be
better
25kg/pail
LW-N341
Characteristics and uses Solution composition and operating Packaging
conditions
1. No chromium and other heavy metals LW-N341 100-150ml/L
harmful substances, in line with ROHS Temperature 50-60oC
requirements.
2. It can effectively remove the surface
residues, enhance the adhesion.
3. If used with ultrasound, the effect will be Time 3-5 minutes
better
25kg/pail
LW-N351
Characteristics and uses Solution composition and operating Packaging
conditions
1. It is used for the activation of magnesium LW-N351 200-250ml/L
alloy and does not damage the substrate. Temperature 25-45oC
2. It forms a conversion coating on the surface
of the product to prevent the magnesium
alloy from being dissolved due to
replacement.
3. Does not contain heavy metals, in line with Time 3-5 minutes
ROHS requirements.
25kg/pail
LW-N361
Characteristics and uses Solution composition and operating Packaging
conditions
1. Does not contain cyanide, in line with LW-N361 500-550ml/L
ROHS requirements. Temperature 65-75oC
2. It can form a uniform dense zinc
replacement plating, with good adhesion.
3. Simple operation and maintenance, long
service life.
Time 2-5 minutes
25kg/pail
LW-N371
Characteristics and uses Solution composition and operating Packaging
conditions
1. The product is stable, easy to operate, in line LW-N371 200-250ml/L
with ROHS requirements. Temperature 25-45oC
2. The removal of zinc is fast and does not
damage the substrate.
3. Long service life.
25kg/pail
LW-N381
Characteristics and uses Solution composition and operating Packaging
conditions
1. It makes the surface of the product more LW-N381 100-150ml/L
uniform and increases the adhesion. Temperature 50-60oC
2. Do not corrode the substrate of magnesium
alloy
3. If used with ultrasound, the effect will be
better.
Time 3-5 minutes
25kg/pail
LW-N391
Characteristics and uses Solution composition and operating Packaging
conditions
1. Does not contain cyanide, in line with LW-N391 500-550ml/L
ROHS requirements. Temperature 65-75oC
2. The crystallization is homogeneous and
enhance the adhesion.
3. The solution is stable and has along service
life
Time 3-5 minutes
25kg/pail
LW-N711
Characteristics and uses Solution composition and operating Packaging
conditions
1. It is specially designed for pre-plated alkali CN- 20-25 g/L
copper for magnesium alloy. Cu+ 30-40 g/L
2. The bath is stable and the planting layer is LW-N711 500-550ml/L
dense. Temperature 50-60oC
3. High current efficiency, good adhesion.
25kg/pail
LW-N712
Characteristics and uses Solution composition and operating Packaging
conditions
1. The crystallization of the plating layer is CN- 15-20 g/L
fine. Cu+ 45-55 g/L
2. Operation and maintenance is simple. LW-N712 100-150ml/L
3. The dispersing ability and covering ability Temperature 50-60oC
of the bath are very good.
25kg/pail
LW-721
Characteristics and uses Solution composition and operating Packaging
conditions
1. It is specially designed for pre-plated alkali Copper
70-90 g/L
copper for magnesium alloy. pyrophosphate
2. The bath is stable and the planting layer is Potassium
250-280 g/L
dense. pyrophosphate
3. High current efficiency, good adhesion. LW-721 100-150ml/L
Temperature 50-60oC
PH 8.6-9.0
25kg/pail
LW-731
Characteristics and uses Solution composition and operating Packaging
conditions
1. The crystallization of the plating layer is Silver
40-55 g/L
fine, with little gap and have good reflective cyanide
properties. Potassium
100-120 g/L
2. The plating layer has good thermal cyanide
conductivity and weldability. LW-731 10-20ml/L
3. Fast deposition rate. Current
0.2-4A/dm2
density
Iron ≤ 0.005% -
Potassium
0.05% -
1. Used as material for the ≤
fireworks industry. 20kg/pail
2. Used as material for the Calcium ≤ 0.03% 7440-70-2
rocket launchers.
3. Used as material for the Magnesium
0.005% 7439-95-4
ceramics. ≤
4. Used as materials for glass 6 – 9 at
pH
softening process Iron ≤ 0.001% 7439-89-6 25ºC
Chloride
0.005% -
≤
Water
0.01%
Insolubles ≤
- Trisodium Phosphate Anhydrous
Product description:
- Chemical formula: KNO3
- Potassium nitrate-saltpeter decomposes used for the production of NPK fertilizers, glass,
conductive fire as explosives, making matchsticks…
- NaNO3 - Sodium nitrate
Magnesium
---
Nitrate
Iron 0.005
PRODUCT DESCRIPTION
Recipe: NaNO3
Other names: Matchstick Salt, Soda nitre, saltpeter from Chile, compact, Sodium saltpeter, Nitratine,
Nitric acid sodium salt, Natriumnitrat.
Shape: NaNO3 in the form of white beads.
Preservation: a dry, airy Place.
Application:
+ Sodium nitrate are used widely as fertilizer and raw materials in the manufacture of gunpowder. It can
combine with iron hydroxide form a kind of plastic.
+ Nitric acid used in the manufacture by the reaction with sulfuric acid.
+ A few other popular applications is Sodium nitrate can be used as alternative substances for Potassium
nitrate
+ Sodium nitrate is also used in combination with potassium nitrate in solar thermal panels.
+ Also, Sodium nitrate is also used to treat sewage water for nitrate supply thanks to the aerobic
microorganism arbitrarily, helps the process of sewage treatment thanks to microorganisms occurs more
quickly
- CeO2 – Cerium Oxide
- Polishing fast
- Easy to clean
Certificate of Analysis for CEO2 Polishing Powder (Pr 3%)
A nlysis Result
Name of Com FL-300 Specific Area 814.5 m²/kg
Refractivity 2.200 D [3,2] 1.05 μm
Absorptivity 0.1 D [4,3] 1.81 μm
Dispersant Water Dv (10) 0.480 μm
Refractivity of Dispersant 1.33 Dv (50) 1.53 μm
Scattering model Mie Dv (90) 3.58 μm
Analysis model MS2000/ MS2000E Dv (100) 6.33 μm
weighted residual 0.30%
Shading of Laser 10.41%
- IPA – ISOPROPYL ALCOHOL
Formula: C2H5OH
Concentration: 96%
Used in food technology (cleaning food processing tools, deodorizing food), producing beer,
alcohol, used in the medical field (producing antiseptic drugs, alcohol, disinfecting Medical
equipment in hospitals ....)
Alcohol is contained in plastic drums / iron drums or into tanks (depending on customers'
requirements)
+ Ethanol 99%:
Absolute Ethanol alcohol, also called ethyl alcohol, is pure alcohol, an organic compound in the
homogeneous range of alcohol methylic, a volatile, flammable, colorless liquid. Ethanol is one of
the common alcohols in the composition of alcoholic beverages.
Concentration:, 99.5%
2/ CLEANROOM PRODUCTS
+ Anti-static clothes
+ Anti-static shoes
+ Cleanroom gloves
+ Cleanroom mask
….
+ Dusty roller
+ Anti-static chair
3/RESIN
► Explanations
► Standard
Q/WGC007-2012
► Processing techniques
Normal extruding machine is applicable; can extruding in a normal PVC screw. In order to enhance
productivity, when the screw compressor in lower but more gum productivity, LD≥20, compression ratio
1.2 : 1 is recommended. As the melt temperature is concerned to the length, compressor ratio of
extruding machine and screw configuration. Melt extrusion temperature are recommended as follow
show:
Package:net weight (25±0.2)kg per bag. Foil/polyethylene complex film bag for inner and PP
woven bag for outer.
Storage and transport: keep away from the sunshine, rain and soaking during transport. Stored in
clean, dry and ventilated warehouses. If keep in the warehouse for over 60days, please make it dry at 60-
70℃ for at least 2 hours before using. Warranty: 12 months.
Standard Typical
Experiment item Unit Test method
value value
► Explanations
► Standard
Q/WGC007-2012
► Processing techniques
Normal extruding machine is applicable; can extruding in a normal PVC screw. In order to enhance
productivity, when the screw compressor in lower but more gum productivity, LD≥20, compression ratio
1.2 : 1 is recommended. As the melt temperature is concerned to the length, compressor ratio of
extruding machine and screw configuration. Melt extrusion temperature are recommended as follow
show:
Package:net weight (25±0.2)kg per bag. Foil/polyethylene complex film bag for inner and PP
woven bag for outer.
Storage and transport: keep away from the sunshine, rain and soaking during transport. Stored in
clean, dry and ventilated warehouses. If keep in the warehouse for over 60days, please make it dry at 60-
70℃ for at least 2 hours before using. Warranty: 12 months.
- UM-2910H 90 ℃ low-smoke halogen-free flame retardant cable compound for fiber optical cable
► Explanations
UM-2910H is a kind of low-smoke halogen-free thermoplastic compounds for polyolefin retardant
cables. This product is made from EVA, POE as the main base material, mixed with inorganic flame
retardant, lubricant, antioxidant etc. The product burns halogen free acid gas emission and with extremely
low smoke. It matches the ROSH、REACH standard. This product is applied to high requirement of
extrusion processing such as fiber optic, data cable electronic line. Die salivate less, suitable for high
speed extrusion process,can pass suitable proportion of single vertical burning testing.
► Standard
Q/WGC007-2016
► Processing techniques
Normal extruding machine is applicable; can extruding in a normal PVC screw. In order to enhance
productivity, when the screw compressor in lower but more gum productivity, LD≥20, compression ratio
1.2 : 1 is recommended. As the melt temperature is concerned to the length, compressor ratio of
extruding machine and screw configuration. Melt extrusion temperature are recommended as follow
show:
Package:net weight (25±0.2)kg per bag. Foil/polyethylene complex film bag for inner and PP
woven bag for outer.
Storage and transport: keep away from the sunshine, rain and soaking during transport. Stored in
clean, dry and ventilated warehouses. If keep in the warehouse for over 60days, please make it dry at 60-
70℃ for at least 2 hours before using. Warranty: 12 months.
Standard Typical
Experiment item Unit Test method
value value
4. Thermal deformation(90℃
% ≤50 5 GB/T 8815
× 4h)
► Explanations
► Standard
Q/WGC007-2013
► Processing techniques
Normal extruding machine is applicable; can extruding in a normal PVC screw. In order to enhance
productivity, when the screw compressor in lower but more gum productivity, LD≥20, compression ratio
1.2 : 1 is recommended. As the melt temperature is concerned to the length, compressor ratio of
extruding machine and screw configuration. Melt extrusion temperature are recommended as follow
show:
Package:net weight (25±0.2)kg per bag. Foil/polyethylene complex film bag for inner and PP
woven bag for outer.
Storage and transport: keep away from the sunshine, rain and soaking during transport. Stored in
clean, dry and ventilated warehouses. If keep in the warehouse for over 60days, please make it dry at 60-
70℃ for at least 2 hours before using. Warranty: 12 months.
► Product properties (see sheet 1)
Sheet 1: properties of 90 ℃ low-smoke halogen-free flame retardant cable compound for fiber optic
cable
Standard Typical
Experiment item Unit Test method
value value
% Max±30 +15
Change of tensile properties GB/T 2951
% Max±30 -8
4. Thermal deformation(90℃
% ≤25 20 GB/T 8815
× 4h)
- UMPE-3311H
General Information
Description:
Electricity-mark resistant black PE jacketing compounds for ADSS optical cables made by mixture,
plasticization and granulation with the polyethylene as the basic resin mixed with antioxidants、lubricant
and other additives. It has good weathering resistance, electrical and gas performance, waterproof and
moisture-proof, good environmental stress cracking performance and electric mark resistanc. It is used as
the jacketing compound of ADSS cable apply in HV electric field up to 110KV, the performance of
optical cable match DL/T 788.
Specification Sheet
Product Properties:
Processing Techniques:
This product has good process performance, the recommend L/D is 20-25, compression rate is 1.5-2.5, the
temperature set as below:
- Cylindrical Brush
- Cnc Brush
- Lapping film
- CeO2 pad
- CNC Jig
- Tool CNC
- Tape
Tape with kinds of materials: PU, PE, PET,Urethan, Poron, Foam ....
- Sandpaper
- PreScale film
Products information
Scale allows you to easily measure the balance, distribution, and magnitude of pressure. This type of
film is based on a high-tech thin film coating technique. The film will look like a pressure sensor and
in the blink of an eye it can see the distribution of pressure across the entire surface. The pressure area
will turn red depending on the pressure, so that the strength and pressure balance can be checked.
Scale allows measuring pressure in a wide range (from 0.006 to 300MPa).
Absorb a large amount of chemicals acid, base, corrosive or unknown sources, can even absorb 98%
Sulfuric Acid without burning;
Composed of 8 layers of 100% polypropylene material heat-pressed together, the most durable in the
market, not frayed or torn even when soaked with chemicals;
- Filter
- Vinyl