Professional Documents
Culture Documents
BEZAPRINT Yellow RR
Colour-intense, golden-yellow pigment with very good fastness level and thermostability. Very suitable for all applications.
Colour
g/kg
20
100
16
12 90
K/S
8 80
4 70
Reflectance [%]
0
60
0 20 40 60 80 100
Concentration [g/kg] 50
40
20
Discharging agent 10
Tubiscreen DC Agent + 0
Ecological profile
bluesign approved
®
yes
Formaldehyde free
** The use of pigments that contain one of the mentioned substances may lead to the detection of restricted arylamines on the finished textile. Please, follow carefully below
application instructions, especially these for the temperature conditions, and contact our Technical Department in case of need for further clarification.
** Combinations of C.I. Pigment Orange 13 or 34 with C.I. Pigment Black 7 should be avoided, as 3.3’-dichlorobenzidine can be released with these combinations under the
conditions of the testing method for amines.
The BEZAPRINT range fully complies with the requirements on the limits for impurities or by-products as specified in the ZDHC Manufacturing Restricted Substances List
(ZDHC MRSL, current version 3.1, March 2023, refer to www.roadmaptozero.com).
Application information
Recommended maximum concentrations of pigments are around 50 g/kg for colours and 60 g/kg for black, and can also reach 100 g/kg for opaque printing pastes. Temperature
for fixation of the prints should not exceed 180 °C (standard: 150 °C / 5 minutes).
Contact fastness levels depend on a reasonable ratio between concentration of pigment and self-crosslinking binder - the following formula shows a possible example.
Addition of fixing agents could help to intensify crosslinking.
Fastness
Suitability for PVC coating DIN EN ISO 105-X10 PVC 4-5 4-5 4-5
Saliva Perspiration
Fastness to saliva and perspiration BVL B 82.10
CO 30 g/kg fast fast
CC on cotton CC on polyester
Sample
1 g/kg 30 g/kg 1 g/kg 30 g/kg
150 °C 4 min cured 5 5 5 5
CC on cotton CC on polyester
Sample
1 g/kg 30 g/kg 1 g/kg 30 g/kg
C = clearer
B = bluer
G = greener
R = redder
Y = yellower
CC = colour change
CO = staining of cotton
PA = staining of polyamide
PES = staining of polyester
PVC = staining of the PVC-foil
SO = staining of the solvent
n.s. = not suitable
This data is given to the best of our knowledge and belief. It does not guarantee specific product properties. All information is subject to change without notice.
CHT SWITZERLAND AG | Kriessernstrasse 20 | 9462 Montlingen | Switzerland | Phone +41 71 7638811 | Fax +41 71 7638888 | www.cht.com | info.switzerland@cht.com
08 / 2023 CHT GERMANY GMBH | Bismarckstraße 102 | 72072 Tübingen | Germany | Phone +49 7071 154-0 | Fax +49 7071 154-290 | www.cht.com | info@cht.com