Professional Documents
Culture Documents
The device is able to prevent the jammer's disruption by so called null stearing. Null
stearing is an advanced method, which allows for transmition/reception antenna array to
direct zero (NULL) and prevent from wireless communication jamming. By using the
GPSdome the environmental noises, other transmitters interferences are reduced.
Advantages:
● Easy installation - The process of installation is not time consuming and does involve any changes in the current GPS installations.
● A variety of installation options – GPSdome can be installed almost everywhere due to its small size and low electricity
consumption
● High compatibility – GPSdome can be added to almost all GPS receivers with the GPS antenna.
GPSdome can be easily connected in-line between the existing GPS antenna and receiver. Additional antenna must be plugged in order
to take the power, which is provided by the receiver to the antenna. There is a LED indicator in the device, which produces a green light
when the jamming is detetected.
Specification
Specification of the GPSdome anti jammer
Enclosure: 70mm x 48mm x 24mm (excluding mounting lugs)
Weight: 175g
Mounting: 4 x M3 bolts (not supplied)
Operating temperature range: – 40°C to 85°C
Protection: IP67
Primary antenna input (P): 50Ω SMA (for active GPS antenna)
Auxiliary antenna input (A): 50Ω SMA (for active GPS antenna)
RF Output to GPS Receiver (R): 50Ω SMA 3-12VDC 0.75W
Protected signal: 1575.42 MHz (GPS L1 C/A Code)
Latency: < 1μs
Compression point: 25dBm
R&TTE 1999/5/EC : EN60950-1: 1575.42 MHz (GPS L1 C/A Code)
Safety and compliance: • EN301 489-1
• EN301 489-3
• EN300 440-2
• RoHS compliant
Inbox
● 1 x GPSdome module