SUZUKI
LrnrBawe:
SERVICE MANUALFOREWORD
The SUZUKI LT160E was designed to otter superi-
‘or performance through four stroke power, equipp-
ed with @ reverse gear. The suspension system con
sists of “wishbone” for front and “swingarm” for
This service manual has been produced primarily
Tor experienced mechanics wluse job is tw ine
spect, adjust, repair and service SUZUKI vehicles.
Apprentice mechanics and “do it yourself” me-
chanics will also find this manual to be an extreme-
ly useful guide.
The LT160E, manufactured to standard specifica-
tions, is the main subject matter of this manual
However, the LT160E machines distributed in your
country might differ in minor respects from the
standard-specification and, if they do, itis because
some minor modifications (which are of no con-
sequence in most cases as far as servicing is con-
cerned) had to be made to comply with the statu-
tory requirements of your country.
This manual contains up-to-date information at the
time of its issue, Later made modifications and
changes will be explained to each SUZUKI distrib-
tor in respective markets, to whom you are kindly
requested to make query about updated informa:
tion, if any.
SUZUKI MOTOR CORPORATION
C COPYRIGHT SUZUKI MOTOR CORPORATION 1990,
GENERAL INFORMATION Ea
AND TUNE-UP PROCEDURES
ENGINE Ei
FUEL AND LUBRICATION system a
ELECTRICAL SYSTEM Ee
CHASSIS: | 6.
SERVICING INFORMATION Ez
LT-F160EL (’90-MODEL) Ez
LT-F160L/M (’90,‘91-MODELS) EZ
LT160EM/N (’91,‘92-MODELS) a
(1994 to 1997-MODELS)
LT-F160Y/K1/K2 (‘00,'01,'02-MODELS) ZiVIEW OF LT160E
LEFT SIDE
IGHT SIDE
Este Medidor de Tensión Se Puede Utilizar para Ajustar La Tensión de Las Correas de Distribucion en El Que El Movimiento de La Correa de Distribución Se Mide Por NM de Carga