Professional Documents
Culture Documents
Make sure the cartridge chip is clean, free of ink smear and debris.
Make sure the printer's contact pin is clean, free of ink smear and debris
Verify that the cartridge is seated in the printer securely. Push it down hard until you hear a
click. Once it is inside, wiggle it with your finger back and forth. If the cartridge seems to be
loose, insert folded paper to the back and thus push the cartridge forward to have good
contact with the printer.
Installation
Possible Causes:
If you installed cartridge with power off, then printer won't know you changed the cartridge. It
will confuse the printer and thus cause cartridge error.
Sometimes Epson printer won't erase previous error code. When it has a depleted OEM
cartridge error, and a non-OEM cartridge warning come together, it causes the printer to
display "cartridge not recognized".
Things to try:
Install non-OEM cartridge early. Do not wait till OEM cartridges empty.
Put the OEM cartridge back and use on-screen prompt to change cartridges.
Power off the printer and leave it about 1 hour then power it on
Remove all cartridges. Let the printer run without any cartridge. It will create a "no cartridge
installed" error and thus erase the "ink cartridge empty" error. After the printer settles down,
use on-screen prompt to change cartridges.