Professional Documents
Culture Documents
Accumulators
Accumulators maximize the energy • Piston, bladder and diaphragm designs
efficiency of hydraulic systems by • Shock suppressors
increasing productivity, reducing • Reservoir isolators
maintenance and lowering overall • Gas bottles
operating cost. These systems last • Charging kits and accessories
longer and provide better
performance than comparable
systems without accumulators
Rotary Actuators
Hydraulic and pneumatic rotary • Rack and pinion
actuators featuring long-life, • Non-tie rod rack & pinion
durability and high efficiency • Single and double vane
for low cost operation. Offering • Custom engineered housings
a full range of torque options and shafts
and pressure ratings matched to • Materials: titanium, monel,
the application for an optimum stainless, bronze
solution. • Special environments and
applications
Cylinders
From off-the-shelf mobile or • Industrial Tie Rod
quick-delivery tie rod to highly • Mobile
engineered cylinders for your • Mill Type
specific applications, the wide array • Electrohydraulic
of hydraulic cylinders from Parker • Telescopic
reduce your cost by providing the • Custom
optimum hydraulic actuator solution.
Filtration
Parker’s hydraulic filters deliver • Pressure & return filters
positive protection against • Off-line & purification systems
contamination, providing reliability • Reservoir accessories
for your hydraulic systems and • Fluid condition monitoring
components. On-line particle analysis, • Fluid analysis
off-line bottle sampling and water • Competitive interchanges
contamination analysis are perfect
complements to high performance.
Motors
Parker’s complete line of long life • Low speed high
hydraulic motors provides solutions to torque motors
almost any rotary power application. — Gerotor
Piston units deliver unmatched — Radial piston
performance and efficiency. Gear • High speed motors
and gerotor motors are a lower — Piston - fixed & variable
cost answer for many applications. displacement
Pressures to 420 bar (6000 PSI). — Vane
Horsepower from 5 to over 600. — Gear
Pumps
Designed to handle a wide range • Gear pumps
of applications, Parker pumps are • Piston and Vane pumps
available with a full complement of • Fixed and variable
computer and electronic controls. displacement pumps
Manufactured with the finest • Gold Cup hydrostatic
materials under the strictest control, transmission pumps
these pumps deliver high efficiency • Flow dividers/intensifiers
and low maintenance under the
toughest operating conditions.
Compact Hydraulics
Compact, powerful and efficient • Electro-hydraulic actuators
performance are delivered • Miniature power units
from Oildyne products. Robust, • Fluid power systems
simple designs provide power • Gear motors
density, easy installation and • Piston pumps
flexibility for use across a wide • Cartridge piston pumps
variety of applications. • Hand pumps
Threaded Cartridge Valves
Parker has one of the broadest lines • Solenoid valves
of cartridge valves and manifold • Pressure controls
systems in the industry. With expert • Flow controls
applications engineering assistance, • Check and Shuttle valves
we can develop and design virtually • Logic elements
any solution to meet your needs. From • Load and motor controls
simple cartridge valve applications to • Proportional control valves
complex integrated manifold systems, • Integrated manifold solutions
we can handle it all.
Flow controls, flow dividers, pilot • Flows to 225 LPM (60 GPM)
operated check valves, relief • Pressures to 207 Bar (3000 PSI)
valves, selector valves and • Cast iron bodies
bankable/stackable directional
control valves
Colorflow Valves
• Inline mounted flow, check, • Maximum operating pressures up
needle, gauge isolator and to 345 Bar (5000 PSI)
snubber valves • Flows up to 568 LPM (150 GPM)
• Flow controls available in • Steel bodies; some models also
pressure compensated models available with brass or stainless
• Sizes ¹⁄₈"–2" steel
• Choice of NPTF, SAE, BSPP and
ISO 6149 metric ports
Ball Valves
• Designed for hydraulic, • Assortment of port
pneumatic and other media configurations including
• Features full-port design threaded, manifold
for low pressure drop mounted, SAE split flange
and maximum system and a unique 4-bolt rotating
efficiency SAE flange design
• Blowout-proof stems
P1D Series Non-Lube ISO Cylinders 2MA with Linear Position Feedback
ARVI HITECH
No: 210, Anna Street, Devar Nagar, Padi,
Chennai - 600 050.
Tel Fax no: +91-44-26543738
Mobile: 9884802547 & 9840601278
Pneumatic Cylinders
P1M Swing Clamp Cylinders LP/LPM Series Low Profile Cylinders
ARVI HITECH
No: 210, Anna Street, Devar Nagar, Padi,
Chennai - 600 050.
Tel Fax no: +91-44-26543738
Mobile: 9884802547 & 9840601278
Pneumatic Valves
Parker PHS Series Solenoid pilot actuated in-line valves N Series High-Speed Poppet Valves
Compact inline design in three body
sizes features a short stroke poppet
3/2, 5/2 and 5/3 configurations
for fast, consistent response. Prelubed
Sizes 1/8”, 1/4”, 3/8” and 1/2”
for non-lube service. Suitable
Higher flow rates, compact design
for low pressure and vacuum
Solenoids are available with locking or
service with external pilot. Special
non-locking manual over rides.
service pilots available for applications
Max operating pressure 10 Bar
requiring continuous duty
Working Temperature +5˚c to +60˚c
operation. Pressures up to 250 PSIG.
Flow rates up to 3000 LPM
2 and 3-way, 2-position
• Three body sizes
• Normally open or normally closed
• Inline mounted
PVL Series
ADEX Series
Easy in, easy out stack assembly
speeds installation and makes future Valves utilize 0.6 watt solenoids
configuration changes or service with LED and surge suppression.
fast and simple. Output ports The collective wiring system
available either threaded or with available for A05 and A12 valves
instant tube fittings. Thin valve accommodates up to 12 stations
cross sections allow for more valve and connects with Sub-D 25 or
outputs in a smaller package. Stack 26-pin ribbon.
has two common exhaust galleries. • 4-way, 2 and 3-position and 3-way,
• Three body sizes 2 position (NO or NC)
• Stacking manifold valves designed • Inline or bar manifold mounted
for DIN rail mounting • Collective wiring system - Sub-D
• Single and double solenoid or 25 or 20-pin Multi connector
air pilot operated
ARVI HITECH
No: 210, Anna Street, Devar Nagar, Padi,
Chennai - 600 050.
Tel Fax no: +91-44-26543738
Mobile: 9884802547 & 9840601278
Fluid Connectors
DIN Fittings Adapter High Pressure Hydraulic Flanges
ARVI HITECH
No: 210, Anna Street, Devar Nagar, Padi,
Chennai - 600 050.
Tel Fax no: +91-44-26543738
Mobile: 9884802547 & 9840601278
Parker Electromechanical Products
ET Series Electric Cylinders ER Series Rodless Actuators
The ET Series Electric Cylinder is built The HPLA is a rugged “next genera-
to last. Its robust design, which tion” linear module that offers high
includes angular contact thrust speed, high acceleration, and long
bearings and roller bearing travel, combined with stiff, rigid
anti-rotation rod bearing carriage, construction characteristics. It is
ensures durability in the most ideally suited as a single axis product
demanding application. Available in or as a component for high speed
four sizes, the ET Series offers the multiaxis gantries. The HPLA carriage
choice of ball screw or acme lead is rigidly supported on three sides by
screw transmissions. heavy duty roller bearings, housed in a
rugged aluminum housing. The
bearing wheels are pre-loaded via
eccentric bushings to eliminate play in
the system, and are strategically
located to evenly distribute the load
across the length of the carriage.
ARVI HITECH
No: 210, Anna Street, Devar Nagar, Padi,
Chennai - 600 050.
Tel Fax no: +91-44-26543738
Mobile: 9962342042 & 9840601278
Rotary Indexing Tables Servo Driven Indexing Tables
Autorotor Rotary Indexing Table series The same mechanism, the same
5 is a mechanical square axis unit to reliability, the same precision as the
transform the uniform rotation of inlet mechanical indexing tables Series 5.
shaft in an intermittent rotation of On the top of it, totally programmable
output disk. The number of standard by means of a PC, PLC or a dedicated
indexing ranges from 2 up to 32. From panel. It is possible to set the angle of
32 up to 540 indexing on request. rotation, the turning speed and the
Indexing tables are generally mounted acceleration ramp.
on: The servo motor which moves the
table is driven by a digital gear with
• Assembling machines integrated axis card.
• Packing equipments The TE table can operate both within a
• Manufacturing equipments bigger system (in this case its brand of
• Automated welding machines electronics will be the same as the
• Movement devices system’s) and autonomously, in
• Machining isles medium-small very flexible structures.
• Filling machines
• Printing machines
Square axis Intermittent
Rotary Rings and Oscillating Drives
The IT series intermittent drives and
Rotary indexing table series 5 and
the OT series oscillating drives are
Indexing Rings are mechanical square
mechanical square axis devices.
axis devices which transform the
A mechanical barrel cam and followers
uniform rotation of inlet shaft in an
transform the inlet shaft uniform
intermittent rotation of output disk.
rotation into intermittent rotation (as
These commonly used tables are
regards IT series), or an intermittent
characterized by high speed, continu-
oscillation (as regards OT series), at the
ous and totally controlled displace-
outlet. Also for the IT series, the
ment, smooth running also at high
number of standard indexing can
frequency, self-locking in dwell
range from 2 up to 32, over 32, up to
position, high repeatability, absence
540 on request (it is also available the
of vibrations, low maintenance and
continuous type). Standard oscillating
low installed power.
angle of the OT series can be up to 90°.
As a rule for all the production, Auto
High Speed Intermittent rotor applies the most suitable motion
Oscillating Drives law for specific customer's need,
following exact mathematical
functions.
The Autorotor high speed intermittent
drive ITV series 5 is a mechanical Parallel axis Intermittent and
square axis device. A mechanical cam Oscillating Drives
with followers transforms the inlet
Intermittent drives series AP( PARAL-
shaft uniform rotation into a predeter-
LEL AXIS ) and oscillating drives series
mined intermittent rotation or oscilla-
OP are mechanical parallel axis units
tion at the outlet. High speed intermit-
which transform the uniform rotation
tent drives ITV series are mechanical
of the inlet shaft in an intermittent
square axis devices, whose operating
rotation of the output shaft.
principle is almost the same as the IT
The output shaft is hollow, so hoses,
series above. Their peculiar manufac-
wires, etc. can pass through it.
turing feature, however, make them a
The number of AP indexing ranges
class of products apart. At Present
from 1 to 8; standard OP oscillation
their speed can reach 700/800
angle can reach 45°.
cycles/min. (excellent speed for tablet
press, high speed press/shears feeder,
etc.), although featuring high repeat-
ability and absence of vibrations
which are peculiar to Auto rotor
production.
ARVI HITECH
No: 210, Anna Street, Devar Nagar, Padi,
Chennai - 600 050.
Tel Fax no: +91-44-26543738
Mobile: 9884802547 & 9840601278
Manipulators
ARVI HITECH
No: 210, Anna Street, Devar Nagar, Padi,
Chennai - 600 050.
Tel Fax no: +91-44-26543738
Mobile: 9884802547 & 9840601278
Solutions
Oven Endurance Testing fixture Refrigeration Type de-humidifier Refrigerated Air Dryer