Professional Documents
Culture Documents
MODEL WRS5200
MODEL WRSPUDF
RIDE-ON ROLLER SCREED
(KUBOTA WG972GL-E3 DUAL FUEL
GAS AND PROPANE ENGINE)
Revision #1 (06/29/15)
PN: 46189
TABLE OF CONTENTS
WRS5200/WRSPUDF Frame Section Drawings
5' Frame Assembly. (Operator End) .................. 72-73
Ride-On Roller Screed 5' Frame Assembly. (Engine End) ..................... 74-75
Table of Contents...................................................... 2
3', 4', 6', 8' and 9' Frame Section Assemblies.... 76-77
Parts Ordering Procedures....................................... 3
WRS1400LP Assembly...................................... 78-79
Explanation of Code in Remarks Column................ 4
WRS1600LP Assembly...................................... 80-81
Suggested Spare Parts............................................ 5
WRS1800LP Assembly...................................... 82-83
Component Drawings WRS2200LP Assembly...................................... 84-85
Nameplate And Decals Assembly (Screed).......... 6-9 WRS2600LP Assembly...................................... 86-87
Nameplate And Decals Assembly (Power Unit).10-11 WRS2800LP Assembly...................................... 88-89
Operator Seat Assembly................................... 12-13 WRS3200LP Assembly...................................... 90-91
Throttle Assembly.............................................. 14-15 WRS3600LP Assembly...................................... 92-93
Stack Valve Assembly........................................ 16-17 WRS4000LP Assembly...................................... 94-95
Speed Control Valve Assembly.......................... 18-19 WRS4400LP Assembly...................................... 96-97
Solenoid Valve Assembly................................... 20-21 WRS4800LP Assembly...................................... 98-99
Drive Tube Motor Assembly............................... 22-23 WRS5200LP Assembly.................................. 100-101
Control Box Assembly........................................ 24-25 Shaft Puller Assembly.................................... 102-103
Control Box Lid Assembly.................................. 26-27 Screed Length Parts Matrix........................... 104-105
Emergency Stop/Module/Eng.Igniter Assy........ 28-29
Power Unit Frame And Lights Assembly........... 30-31 Terms And Conditions of Sale — Parts................ 106
Lift Bale Assembly.............................................. 32-33
NOTICE
Fuel Hose Assembly.......................................... 34-35
LPG Fuel Hose Assembly.................................. 36-37 Specifications are subject to change without notice.
LPG Fuel Components Assembly..................... 38-39
Battery Assembly.............................................. 40-41
Hydraulic Tank/Cooler Assembly........................ 42-43
Hydraulic Pump Assembly................................. 44-45
Control Valve Assembly..................................... 46-47
Loop Flushing Valve Assembly.......................... 48-49
Strike Tube Motor Assembly............................... 50-51
Radiator Guard Assembly.................................. 52-53
Radiator Assembly............................................. 54-55
Engine And Air Cleaner Mounting Assembly..... 56-57
Pump/Housing/Coupler Assembly..................... 58-59
Choke And Throttle Assembly............................ 60-61
Engine Assembly............................................... 62-63
Power Cable/Engine Controller Assembly......... 64-65
Pressure Washer Assembly.............................. 66-67
Caster Assembly. .............................................. 68-69
Tarp Assemblies................................................ 70-71
Goto www.multiquip.com and click on Use the internet and qualify for a 5% Discount
Order Parts to log in and save! on Standard orders for all orders which include
complete part numbers.*
Note: Discounts Are Subject To Change
Order via Fax (Dealers Only): Fax your order in and qualify for a 2% Discount
All customers are welcome to order parts via Fax. on Standard orders for all orders which include
Domestic (US) Customers dial: complete part numbers.*
1-800-6-PARTS-7 (800-672-7877) Note: Discounts Are Subject To Change
Non-Dealer Customers:
Contact your local Multiquip Dealer for International Customers should contact
parts or call 800-427-1244 for help in their local Multiquip Representatives for
locating a dealer near you. Parts Ordering information.
NOTICE
NOTICE
Part numbers on this Suggested Spare Parts list may
supersede/replace the part numbers shown in the
following parts lists.
P/N 36096
CAUTION
3
LIFTING
11
POINT
P/N 36093
6 5
4
LUBE
10 11
4
Keep hands and feet
clear of drive tube
7
while in operation.
9
5
8
4
4
8
5
2
3
Operator must be seated for operation.
Insure all levers are in neutral postion
before screed is put into operation.
1
36826
P/N 36481
12 7
26 5,4,9,3,5 L, L18, L14, R8, R 18,8 79.90
28 5,9,3,6,5 L, L14, R8, R14, R 14,14 79.24
30 5,9,8,3,5 L, L14, RM8, R8, R 14,16 78.62
32 5,9,3,6,4,5 L, L14, R8, R14, R18, R 14 78.05
36 5,9,8,3,6,5 L, L14, RM8, R8, R14, R 14, 8, 14 77.00
40 5,9,8,3,6,4,5 L, L14, RM8, R8, R14, R18, R 14, 8, 18 76.06
44 5,9,8,8,3,6,5 L, L14, LM8, RM8, R8, R14, R 14, 16,14 75.22
6
44 5,4,9,8,3,6,4,5 L, L18, L14, RM8, R8, R14, R18, R 18, 8, 18 75.22
48 5,9,8,8,3,6,4,5 L, L14, LM8, RM8, R8, R14, R18, R 14, 16, 18 74.45
52 5,4,9,8,8,3,6,4,5 L, L18, L14, LM8, RM8, R8, R14, R18, R 18, 16, 18 73.74
11 8
10
4
11
3 !
WARNING
GASOLINE can cause
fire or explosion.
Stop engine before fueling
Keep cigarettes, sparks
and flame away.
P/N 36699
MODEL
1
SERIAL NO. 5
SERIAL NO.
CAUTION 9
7
P/N 36093
10
1
4 2
3
4
6
5
8
15 16
14
10
14
12
13
11
23
14
19
13
22
9
18
18 17
20
7
19
21
22
4
3
6
5
6
HYDRAULIC 7
PUMP
9
11
8
10
6
12
POWER UNIT
FRAME
13
17
16
18
19
20
HYDRAULIC
TANK SPEED CONTROL
13 VALVE
9 9
4 4
8 29
6
5 7
11 3
9
28
4
27 1
29
5
7
10
11
15
DRIVE TUBE
MOTORS
5
STACK
8 VALVE 6 4
11 7
17 9 3
10
9
11 8 2
1
12
13
14
11 14 13
17 SOLENOID
VALVE
9 9
8 10
16 11
8
15 16
HYDRAULIC
TANK
SPEED
CONTROL
VALVE
6
5
7
4 1
3
2
3
STACK
VALVE
1
2
4
1
3 1
4
21
18
1 BRIDGE TB1-TB4
BRIDGE TB5-TB8
8
12 TB1
6 TB21
TB1-4 14
TB5-8
13
10 11
TB9-16 12
14
1 TB17-21
4
2
5 2
16
POWER UNIT
20
19
14-PIN
24 RECEPTACLE
22
23
3
15
NOTES:
5
1
14
!
3
9
13
7 4
10 6
7 7
10 12
8
10
38
11
2
37 32
40
42
1 A
36 41 A
42
5 IGNITER
4
17
42
22
21
20
15
RIGHT SIDE
NOTES:
10
1 PART OF 5’ FRAME ASSY 4
(ENGINE END)
3
10 1 2
7
9
8
LEFT SIDE
REAR 19
29
23 28
11
18
22
23 27
11 11
23
23 26
FRONT
11
11
24 11
24
RIGHT SIDE
13
31
12
29 33
7
11
6
41 8
46
42
8
43
9 A 2
38
4 8
47
39 21
32
41
40 22
VAPORIZER 17
6 ASSY
42 20
34 5
25
3 16
37
37 27
A
36
9 24 SOLENOID
28 VALVE
A
11A
10 11
7
1
2 7A
8
9
12
2A
3 CONNECT
POSITVE
1 BATTERY
CABLE TO
POWER RELAY
4 MODULE
7
6
8
CONNECT
TO FLYWHEEL
HOUSING
9
A TO CHASSIS
GROUND
10 RED
17 BLA
CK
16 11
TO TERMINAL 12
BATTERY
JUMP 15
14
17
A
13
18
3
1
45
7
4
27 9 9
45
11 7
47 28 11
8
35 15 18
11 16
14 12
13 8
10
17
6
HYDRAULIC
PUMP
44
19 43
40
42
STRIKE TUBE
INTERFACE PLATE
41
42
29 41
28
29
29
46
28
32
LOOP FLUSHING
VALVE 30 36
CONTROL
VALVE
HYDRAULIC
PUMP
STRIKE TUBE
MOTOR PLATE
STRIKE TUBE
INTERFACE PLATE
LOOP
FLUSHING
VALVE
4
5
11
6
10
12
8 CONTROL
VALVE
13
7
14
9
HYDRAULIC
TANK
STRIKE TUBE
MOTOR
2
3
15
FORWARD/REVERSE
CABLE
NOTES:
1 RUBBER WRAP HOLDS HYDRAULIC
SCREED HOSES TOGETHER.
3
1
12
16
15 11
HYDRAULIC
10 10 TANK
PRESSURE WASHER
INTERFACE PLATE 7
9
18 1
4
6
13
17
14
HYDRAULIC
PUMP
10
8
STRIKE TUBE
INTERFACE PLATE
9
9
5
HYDRAULIC
TANK
4
1
7 PRESSURE WASHER
INTERFACE PLATE
2
4
HYDRAULIC
PUMP
2
1 3
20 STRIKE
5 TUBE
7
6 4
18
10 OUTER
8
PLATE
(ENGINE END)
9
9
11
STRIKE TUBE
INTERFACE PLATE
19
14
13 12
21
15
17
17
16
12
6 27
25
31
39 33
5
26
6
12
5
35
34
RIGHT SIDE
42 18
17 OVERFLOW
BOTTLE
44
5
C
B
1
16
29 43
D
RADIATOR
BRACKET
25 C
D 26
A
2
B 23
24
13
19 28
30
5
45
14
7
AIR
CLEANER
7 RIGHT
8
MUFFLER
51
24
43 30
1
A
25 44
OPPOSITE SIDE 21
OF ENGINE
14
20
27 6
14
31
24
for
choke
NOTES:
A
SPACER PLATE 24
1 FITS BEHIND COIL PACK
22
29 LEFT
22
3
53B
53C 5
7
RIGHT SIDE
19 15 6
36
7 10 7
4 2
6
54
BLUE
16 5
1
LOCTITE
1 9 5 3
6 4 3 1 2
1 23
40
1
7
8 16
13
LEFT SIDE
52
NOTES: 42
1 USE LOCTITE BLUE #246.
2 TORQUE TO 20-25 FT-LBS.
3 TORQUE TO 13-15 FT-LBS.
4 INSTALLATION INSTRUCTIONS
22 WHEN REPLACING THE MAGNETIC
PICK UP, TOUCH OFF ON TOP OF
FLYWHEEL TOOTH, THE BACK OUT
3/4 TURN.
52
B
53 15
54 35
48
18 46
2
51
CARBURETOR
A 26
39
C 41
B
33
A 12
34
5
C
55 37
45 3
38
50
13
12
11 18
10
9 2
7
6
17
5 3
15
14
19
16
3 4
PRESSURE WASHER
INTERFACE PLATE
5
3
20
15 21
13
19
1 18
17
2
4
5
3
6 6
10 7
8
9
10
11 10
14 11
16 12
ENGINE END
NOTES
OPERATOR END
CASTER LOCK ASSEMBLY
1 ONLY FOR USE ON CASTERS
WITH ROUND BASES
3ft
4ft
1 2
6ft
8ft
3
4
9ft
13
11 11
12
10
12
7
6
9 15 12
8
16
33
39
1
40
3
2
4
2
4 5
17
12
12
17
18
25
18
20
22 21
24 23
21 24
23 25
22
36
35 17 26 12
12 27
17
28 37
33 37
34 26
31 39
32 12
31 26
20
20 38
29
10
42
42
44
41
41
35
4 36
38
4 43 20
33
37 20
17 31
28 32
27
1 12 39 31
17
26
10 7 6 12
11 34
26 26
12
8 4
2
9
3
2
4
5
3
25
21 18
13 23
22 18
20
24 23
11 12
21
12 22 25
33 17
15 17
20
39
12
12 16
3 FT. SECTION 4 3 4 3
8 FT. SECTION (ENGINE SIDE)
5 1 5
2
1
6 2
6
8 8 7 8
7
8
9 7
6 FT. SECTION
2
1
8 9
8
3 4
9 FT. SECTION
5
2
1
8 6
7
ENGINE
END
33 5ft 35
43
36
32
42
39 40 41
33
32 4ft 1
20
10
32 19
5ft
31 16
ft
14
18
17
36 37
OPERATOR
END
35
ENGINE
END
33 5ft 35
43
36
32
42
31 39 40 41
3ft
33
5
44
20 19 38
t
8f
16
18
17
7
23
31 22
24
3ft 21
33 5
32 14
5ft
31
t
8f
38
35
OPERATOR
END
36
43
39
40
42 41
ENGINE
END
33 5ft 35
43
36
32
42
39 40 41
32
31 13
8ft
20
33 4
32
32 19
5ft
ft
18
31 16
18
17
36
OPERATOR
END 8
35
ENGINE
33 5ft END
32 35
36
32 37
31 11
9ft
33 2
ft
32 14
20
12
19
16
18
17 7
23
31 22
24
3ft 21
33 5
32 14
5ft
31
t
8f
38
36
OPERATOR
END
35
43
39
40
42 41
ENGINE
31
5ft END
32 35
36
33
32 4ft 8
1
10
32
ft
18
34 11
9ft
33 2
32
20
12
19
16
18 17
7
23
31 22
24
3ft 21
33 5
32 14
5ft
31
t
8f
38
36
OPERATOR
END
35
43
39
40
42 41
ENGINE
33 5ft END
32 35
36
32 37
31 11
9ft
33 2
ft
14
32
20
12
19
16 7
18 23
17 31 22
24
3ft 21
33 5
14
34
6ft
33 6
15
32
32
5ft
ft
14
31
37
36
OPERATOR
END
35
ENGINE
33 5ft END
32 35
36
32 37
31 11
9ft
33 2
ft
14
32
20
12
19
16 7
18 23
17 31 22
24
3ft 21
33 5
14
34
6ft
33 6
15
32
34
4ft
33 1
10
32
ft
18
5ft
31
8
36
OPERATOR
END
35
ENGINE
33 5ft END
32 35
36
32 37
31 11
9ft
33 2 ft
14
32
20
12
19
16
7
18 23
17
22
32
24
21
31 13
8ft
33 4
32
38 31
3ft
t
8f
33 5
7
14
34
23
22 21 6ft
33 6
15
t
24 32
8f
1
32
43
5ft 41 39
ft
14
31
40
42
37
NOTES
36
OPERATOR
1 THE ITEMS WITHIN THE DASHED LINES ARE
END
INCLUDED WITH THE PURCHASE OF A
35 WRS3600LP SCREED BUT ARE NOT REQUIRED
FOR THE ASSEMBLY OF THE SCREED.
ENGINE
33 5ft END
32 35
36
32 37
31 11
9ft
33 2
ft
14
32
20
12
19
7
23
16
22
18 32
24
21
17
31
8ft
33 4
32 31
13 38 3ft
33 5
t
8f
7 14
34
23 6ft
21 33 6
22 15
32
24
34
4ft
33 1
10
32
ft
18
5ft
31
8
36
OPERATOR
END
35
ENGINE
33 5ft END
32 35
36
32 37
31 11
9ft
33 2 7
ft
14
32 32
23
31
22
20
12 8ft 3 21
19
33 24
32
16
18 9
17
32
34 13
8ft
ft
16
33 4
32
31
3ft
33 5
7
14
23 34
22 21
6ft
33 6
24 15
32
32
5ft
ft
14
31
37
36
OPERATOR
END
35
ENGINE
33 5ft END
32 35
36
32 37
31 11
9ft
32 7
23
33 2
ft
31
14
32 22
8ft 3 21
20 33
12 24
19
32
16 9
18 32
17
34 13
8ft
ft
16
33 4
31
32
3ft
33 5
14
7
34
6ft
23 33 6
22 21 15
32
24
34
4ft
33 1
10
32
ft
18
5ft
31
8
36
OPERATOR
END
35
ENGINE
31
5ft END
32 35
36
33
32 4ft 8
1
10
32
25
32 7
ft 23
18
34 11 31
9ft 22
33 2 8ft 3 21
32
33 24
32
20
12
19 9
32
16
1
18 17 34 13 31
8ft
ft
3ft 36
16
33 4 33 5 35
32
14
34
7 6ft
33 6
15
32
23
21
t f
14
22
34
ft
24
14
38
t
4ft
8f
33
10
32
43
ft
18
37 41 39
5ft 37
1 35 40
31
35 36 36 42
8 NOTES
36 1 THE ITEMS WITHIN THE DASHED LINES ARE
OPERATOR INCLUDED WITH THE PURCHASE OF A
END WRS5200LP SCREED BUT ARE NOT REQUIRED
35 FOR THE ASSEMBLY OF THE SCREED.
PAGE 100 — WRS5200DFPU HYDRAULIC ROLLER SCREED • PARTS MANUAL — REV. #1 (06/29/15)
WRS5200LP ASSY.
NO. PART NO. PART NAME QTY. REMARKS
1 36225 4' FRAME SECTION 2
2 36224 9' FRAME SECTION 1
3 36223 8' FRAME SECTION, ENG END 1
4 36222 8' FRAME SECTION, OP END 1
5 36221 3' FRAME SECTION 1
6 36226 6' FRAME SECTION 1
7 36227 MIDDLE BRACKET 2
8 36529 TUBE, STRIKE 18' .25 WALL 2
9 36528 TUBE, STRIKE 16' .25 WALL 1
10 26212 SCRAPER, 4' 2
11 26221 SCRAPER, 9' LEFT 1
12 26222 SCRAPER, 9' RIGHT 1
13 26217 SCRAPER, 8' 2
14 26209 SCRAPER, 3' 1
15 26225 SCRAPER, 6' 1
16 16695 ARM, SCRAPER 16
17 0655 SCREW, 5/16 X 3/4" 32
18 0300 B WASHER, FLAT 5/16" 64
19 5283 NUT, NYLOC 5/16" 32
20 16524 SCREW, HHC 1/2-13 X 1-1/4" GRD 8 16
21 16224 BEARING, BROWNING VF2S-120M 4
22 16222 SHAFT, SPLINED 10T 2
23 16677 NUT, NYLOC 7/16-14 GRD 8 4
24 16676 SCREW, HHC 7/16-14 X 2" GRD 8 4
31 16526 SCREW, HHC 1/2-13 X 1-3/4" 48
32 16630 WASHER, FLAT 1/2" 192
33 16629 NUT, NYLOC 1/2-13 96
34 16525 BOLT, 1/2 X 1-1/2" 48
35 16458 NUT, HEX 1-5/8-12 5
36 16459 NUT, HEX JAM 1-5/8-12 PLTD YLR ZN 5
37 36527 TUBE, STRIKE 14' .25 WALL 2
38 36526 TUBE, STRIKE 8' .25 WALL 1
39 36163 HUB, AUXILIARY .25 WALL 2
40 16630 WASHER, FLAT 1/2" SAE HARDENED 4
41 5054 A WASHER, LOCK 1/2" MED 4
42 16781 SCREW, HHC 1/2-13 X 2-1/4" 4
43 16786 SCREW, SHS 1/2-13 X 3/4" 4
WRS5200DFPU HYDRAULIC ROLLER SCREED • PARTS MANUAL — REV. #1 (06/29/15) — PAGE 101
SHAFT PULLER ASSY.
PAGE 102 — WRS5200DFPU HYDRAULIC ROLLER SCREED • PARTS MANUAL — REV. #1 (06/29/15)
SHAFT PULLER ASSY.
NO. PART NO. PART NAME QTY. REMARKS
1@ 20438 SCREW, HHC 3/8-16 X 5" 1
2@ 36845 WEIGHT, SHAFT PULLER 1
3@ 1456 NUT, HEX FINISH 3/8-16 1
4 36846 SHAFT PULLER ASSY.......................................1................INCLUDES ITEMS W/@
WRS5200DFPU HYDRAULIC ROLLER SCREED • PARTS MANUAL — REV. #1 (06/29/15) — PAGE 103
SCREED LENGTH PARTS MATRIX
Table 1 lists the necessary parts that make up each screed. To determine the model number of a screed, add "WRS"
This table can be utilized for changing the size of an existing in front of and "00LP" behind the length in feet provided.
screed. The different screed models are indicated in the For example, the model number of a 28 ft. screed is
table by their lengths in feet (ft). "WRS2800LP."
PAGE 104 — WRS5200DFPU HYDRAULIC ROLLER SCREED • PARTS MANUAL — REV. #1 (06/29/15)
SCREED LENGTH PARTS MATRIX
WRS5200DFPU HYDRAULIC ROLLER SCREED • PARTS MANUAL — REV. #1 (06/29/15) — PAGE 105
TERMS AND CONDITIONS OF SALE — PARTS
PAYMENT TERMS 5. Parts must be in new and resalable Multiquip reserves the right to quote and
Terms of payment for parts are net 30 days. condition, in the original Multiquip sell direct to Government agencies, and to
package (if any), and with Multiquip part Original Equipment Manufacturer accounts
FREIGHT POLICY numbers clearly marked. who use our products as integral parts of their
6. The following items are not returnable: own products.
All parts orders will be shipped collect or
prepaid with the charges added to the invoice. a. Obsolete parts. (If an item is in the SPECIAL EXPEDITING SERVICE
All shipments are F.O.B. point of origin. price book and shows as being
Multiquip’s responsibility ceases when a A $35.00 surcharge will be added to the
replaced by another item, it is
signed manifest has been obtained from the invoice for special handling including bus
obsolete.)
carrier, and any claim for shortage or damage shipments, insured parcel post or in cases
b. Any parts with a limited shelf life where Multiquip must personally deliver the
must be settled between the consignee and
(such as gaskets, seals, “O” rings, parts to the carrier.
the carrier.
and other rubber parts) that were
MINIMUM ORDER purchased more than six months LIMITATIONS OF SELLER’S LIABILITY
prior to the return date. Multiquip shall not be liable hereunder for
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for c. Any line item with an extended damages in excess of the purchase price of
instructions regarding handling of orders not dealer net price of less than the item with respect to which damages are
meeting this requirement. $5.00. claimed, and in no event shall Multiquip be
d. Special order items. liable for loss of profit or good will or for any
RETURNED GOODS POLICY other special, consequential or incidental
e. Electrical components. damages.
Return shipments will be accepted and
credit will be allowed, subject to the following f. Paint, chemicals, and lubricants.
LIMITATION OF WARRANTIES
provisions: g. Decals and paper products.
No warranties, express or implied, are
1. A Returned Material Authorization h. Items purchased in kits. made in connection with the sale of parts or
must be approved by Multiquip prior to 7. The sender will be notified of any material trade accessories nor as to any engine not
shipment. received that is not acceptable. manufactured by Multiquip. Such warranties
2. To obtain a Return Material Authorization, 8. Such material will be held for five made in connection with the sale of new,
a list must be provided to Multiquip working days from notification, pending complete units are made exclusively by a
Parts Sales that defines item numbers, instructions. If a reply is not received statement of warranty packaged with such
quantities, and descriptions of the items within five days, the material will be units, and Multiquip neither assumes nor
to be returned. returned to the sender at his expense. authorizes any person to assume for it
any other obligation or liability whatever in
a. The parts numbers and descriptions 9. Credit on returned parts will be issued
connection with the sale of its products. Apart
must match the current parts price at dealer net price at time of the original
from such written statement of warranty,
list. purchase, less a 15% restocking
there are no warranties, express, implied or
b. The list must be typed or computer charge.
statutory, which extend beyond the description
generated. 10. In cases where an item is accepted, for of the products on the face hereof.
c. The list must state the reason(s) which the original purchase document
for the return. can not be determined, the price will be
based on the list price that was effective Effective: February 22, 2006
d. The list must reference the sales twelve months prior to the RMA date.
order(s) or invoice (s) under
which the items were originally 11. Credit issued will be applied to future
purchased. purchases only.
e. The list must include the name PRICING AND REBATES
and phone number of the person Prices are subject to change without prior
requesting the RMA. notice. Price changes are effective on a
3. A copy of the Return Material Authorization specific date and all orders received on or
must accompany the return shipment. after that date will be billed at the revised price.
Rebates for price declines and added charges
4. Freight is at the sender’s expense. All for price increases will not be made for stock
parts must be returned freight prepaid to on hand at the time of any price change.
Multiquip’s designated receiving point.
PAGE 106 — WRS5200DFPU HYDRAULIC ROLLER SCREED • PARTS MANUAL — REV. #1 (06/29/15)
NOTES
WRS5200DFPU HYDRAULIC ROLLER SCREED • PARTS MANUAL — REV. #1 (06/29/15) — PAGE 107
PARTS MANUAL
Multiquip Inc, the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property
of their respective owners and used with permission.
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.