Professional Documents
Culture Documents
A43odopp PDF
A43odopp PDF
TROUBLESHOOTING FLOW–CHART
Trouble: No overdrive engagement with the main switch ON. (After warm–up)
With ignition switch ON, is there battery positive voltage to • Severance or short in wire
terminal 2 of the O/D relay connector? harness
• Severance in fuse
Yes
Is voltage between O/D relay terminal 1 and ground as Yes • Faulty transmission
follows? • Faulty O/D solenoid
O/D switch turn ON: 0–12V • Faulty O/D solenoid circuit
O/D switch turn OFF: 0 V
Is voltage between O/D relay terminal 3 and ground as • Faulty O/D main switch
follows? • Faulty O/D main switch
O/D switch turn ON: 0–12V circuit
O/D switch turn OFF: 0 V
Yes
Is there battery positive voltage between O/D relay terminal Yes • Faulty ECM
4 and ground with the ECM connector pulled out? • Faulty Engine coolant
temperature sensor
Terminal
SW Position
OFF