Professional Documents
Culture Documents
Washing Powder PDF
Washing Powder PDF
Formula.1
constituent % by weight
Process
constituent % by weight
constituent % by weight
Formula.4
constituent % by weight
Process
1. Mix all the contents in Ribbon mixture or mix in the iron drum manually.
2. Filter through iron filter.
constituent % by weight
Formula.6
constituent % by weight
Constituent % by weight
Sulfonic acid 150 Parts
Soda ash 250 Parts
CMC 10 Parts
Sodium silicate 100 Parts
SLS 50 Parts
STPP 150 Parts
Soda caustic 50 Parts
Sodium sulfate 150 Parts
Borex 20 Parts
Tinopall 1 Parts
DYE 10 Parts
Perfume 0.50 Parts
Water 68.50 Parts
Total 100.00 Parts
constituent % by weight
Constituent % by weight
Constituent % by weight
Process
1. Mix the sodium carbonate (dhobi soda), sodium silicate, CMC with each other.
2. Add the small quantity of sulfonic in it gradually.
3. Glove should be wear if you want to make it manually.
4. After neutralizing the sulfonic acid acid add the yellow color, sodium bi carbonate.
5. In end mix the water and keep the mixture for 10 mints.
6. Spread the mixture on the floor for drying
7. After drying about 3 to 4 hours.
8. Filter through iron filter.
9. Pack it after complete dry.
Formula.10
Constituent % by weight
Process
1. Mix all the contents in the pot manually.
2. The reaction is very exothermic (hot) for 10 mints.
3. After dying it pack with own brand name.
Constituent % by weight
Process
1. All three contents Sodium silicate ,STP ,and soda ash mix in the mixture machine.
2. Continuously add the little quantity of sulfonic acid in the machine.
3. After running the machine for 15 mints add the pine and perfume in the mixture.
4. Run the machine for 2 mints.
5. Speed the all compounds on the floor.
6. Dry for overnight.
7. Filter through the iron filter.
8. Pack it with after grinding.
Formula.9
constituent % by weight
Formula.10
constituent % by weight
Process
3. The process is same all the soap based formula which is given in the soap based cheap formula.
Formula.11
Formula.12
Process
1. Sunlight soap chips put on fire and melt these chips in the iron pot.
2. Add the half quantity of soda ash in the melted soap.
3. A homogenous mixture become adds the remaining soda in it.
4. In the end add the fats soap in it.
5. Synthesize well all the mixture.
6. Put all the liquid on the floor and dry for overnight.
7. Next day grind the mixture into fine powder
Floor Cleaning
constituent % by weight
Process
Liquid Detergents
Formula.1
constituent % by weight
Process
1. 10 KG Urea powder mix with caustic soda along with 20kg sulfonic acid.
2. All three contents mix with half quantity of given water.
3. When all contents mix well then mix remaining water into it.
4. Check the PH (8.00 to9.00)after cooling
5. Pack it.
Liquid Bluing
Formula.1
Constituent % by weight
Process
To increase the thickness add the Lisapol or TEA or sodium sulfate(10.00 grams) in the solution.
Formula.2
Constituent % by weight
LAUNDRY BLUING
Bluing powders
Formula.1
Constituent % by weight
Starch 1.00 kg
Process
Formula.2
Constituent % by weight
Starch 1.00 kg
Process