externally applied forces so that it is which prestressed membrane structure held completely taut under all is stretched. anticipated load conditions. To avoid a. Distribution cap extremely high tensile forces, a b. Net structure membrane structure should have c. Tent structure relatively sharp curvatures in opposite d. Air supported structure directions. 7. An air-supported structure that uses a a. Net structure net of cables placed in tension by the b. Tent structure inflating force to restrain the c. Air supported structure membrane from developing its natural d. Pneumatic membrane inflated profile. 2. A membrane structure that is placed in a. Cable structure tension and stabilized by the pressure b. Net structure of compressed air. c. Cable-restrained pneumatic a. Net structure structure b. Tent structure d. Cable pneumatic structure c. Air supported structure a. Water supply source d. Pneumatic membrane b. Water main 3. A membrane structure having a surface c. Water service pipe of closely spaced cables instead of a d. Building supply pipe fabric material. a. Net structure b. Tent structure c. Air supported structure d. Pneumatic membrane 4. A reinforcing edge cable tied to the mast support of a membrane structure. a. Cable loop b. Reinforcing edge cable c. Cable-restrained pneumatic structure d. None of the above 5. A cable stiffening the free edges of a prestressed membrane structure. a. Cable loop b. Reinforcing edge cable c. Cable-restrained pneumatic structure d. Cable pneumatic structure