Professional Documents
Culture Documents
TNPSC Engineering Service 2019 Notificaiton PDF
TNPSC Engineering Service 2019 Notificaiton PDF
COMMISSION
Notification No.: 18/2019 DATED: 29.05.2019
Applications are invited from eligible candidates only through online mode upto
28.06.2019 for direct recruitment to the following posts included in the Combined
Engineering Services Examination.
Sl. Name of the
Name of the Post No. of Vacancies Scale of Pay
No. Service
1. Assistant Electrical Inspector Tamil Nadu 10+2*c/f (Pre-Revised)
(Post Code No.1728) Electrical Rs.15,600- 39,100
Inspectorate *SC(G) -2 + Grade pay
Service (2008-2019) Rs.5,400/- p.m.
(Service Code Level – 22
No.026) Rs.56,100 –
1,77,500/- p.m.
2. Assistant Engineer Tamil Nadu
(Agricultural Engineering) Agricultural 93+1*c/f
(Post Code No. 1667) Engineering *GT(G)(HI/HH)
Service (Service (2017-19)
Code No.011)
3. Assistant Engineer(Civil),
(Water Resources Department, 120
PWD) (2014-19)
(Post Code No. 1656) Tamil Nadu
Engineering
4. Assistant Engineer(Civil), Service 73
(Buildings, PWD) (Service Code (2016-17) - 40
(Post Code No. 3656) No.011) (2018-19) - 33
5. Assistant Engineer(Electrical)
13
(PWD) (Post Code No.1657)
(2018-2019)
(Pre-Revised)
6. Assistant Director of Industrial Tamil Nadu Rs. 9300 - 34800
Safety and Health Factory 26 + Grade pay
(Formerly known as Assistant Service (2018-2019) Rs.5100/- p.m.
Inspector of Factories) (Service Code No.
(Post Code - 1664) 011) Level – 20
7. Assistant Engineer (Civil) Tamil Nadu Rs.37,700 –
(Highways Department) Highways 1,19,500/- p.m.
123
(Post Code No.1661) Engineering
(2018-2019)
Service
(Service Code
No.011)
8. Assistant Engineer (Fisheries) Tamil Nadu
3*c/f
(Post Code No. 3017) Fisheries
SC (G) -2
Engineering
BC(G) -1
Service
(Service Code.011)
9. Assistant Engineer (Civil) Tamil Nadu
(Maritime Board) Port Service
2
(Post Code No. 3024) (Service Code
(2010 & 2017)
No.011)
It is mandatory for the applicants to register their basic particulars through one -
time online registration system on payment of Rs. 150/- (Rupees One hundred and fifty
only) towards registration fee and then they should apply online for this recruitment. [The
one-time registration will be valid for five years from the date of registration. Thereafter,
the registration should be renewed by paying the prescribed fee. One Time Registration
will not be considered as an application for any post.]
2. DISTRIBUTION OF VACANCIES
The category wise breakup details, in respect of the vacancies for the above posts
are as follows
BC (OBCM) (W)
BC (OBCM) (G)
GT (G) PSTM
TOTAL
MBC/DC (G)
BC (M) (G)
GT (W)
SC (W)
SC (G)
1 1 1 1 1 1 1 1 1 1 10
CURRENT VACANCIES: 93
BC (OBCM) (W)(LD/LC/DF/AC)
BC (OBCM) (G)(LD/LC/DF/AC)
BC (OBCM) (W) (PSTM)
BC (OBCM) (G) (PSTM)
SC (W) (PSTM)
BC (OBCM) (G)
SC (G) (PSTM)
GT (W) PSTM
GT (G) PSTM
MBC/DC (W)
MBC/DC (G)
SC (G) (LV)
BC (M) (W)
BC (M) (G)
SC(A)(W)
SC(A)(G)
GT (W)
SC (W)
GT (G)
SC (G)
ST (G)
TOTAL
16 4 7 2 13 4 6 1 1 1 2 1 9 2 5 1 1 7 2 2 1 1 2 1 1 93
GT (G) GT (G)
12
20
3
6
GT (G) PSTM GT (G) PSTM
(v)
6
9
(iv)
(iii)
GT (W) GT (W)
1
2
GT (G) GT (W) PSTM GT (W) PSTM
2
1
GT (G) (DAP) GT (G)(DAP)
1
GT (G) PSTM
BC (OBCM) (G)
17
1
GT (W) BC (OBCM) (G)
10
4
BC (OBCM) (PSTM)
1
GT (W) PSTM
4
BC (OBCM) (PSTM)
8
BC (OBCM) (W)
1
BC (OBCM) (G) (PSTM)
3
BC (OBCM) (W)
BC (OBCM) (W) (PSTM)
1
BC (OBCM) (W)
1
BC (OBCM) (W) (PSTM)
1
1
BC (OBCM) (G) (DAP) BC (OBCM) (DAP)
1
BC (OBCM)(G) (DAP)
BC (M) (G)(PSTM) 2 BC (M) (G)
1
2
BC (M) (G)
2
BC (M) (W)
1
MBC/DC (G) BC (M) (W)
3
MBC/DC (G)
12
1
MBC/DC(G) (PSTM) MBC/DC (G)
3
Assistant Engineer(Electrical)(PWD)
MBC/DC(G) (PSTM)
1
SC (G) MBC/DC(G) (PSTM)
6
MBC/DC (W)
Assistant Engineer(Civil) Buildings, PWD
4
SC (A) (W)(PSTM) MBC/DC (W)
1
2
MBC/DC (W)(PSTM)
1
MBC/DC (W) (PSTM)
1
13
1
MBC/DC (G) (DAP)
9
SC (G)
7
SC (G)
2
SC (G) (PSTM)
1
SC (G) (PSTM)
4
SC (W)
3
1
SC (W)
Assistant Engineer(Civil)Water Resources Department, PWD
SC (W) (PSTM)
1
1
SC (A)(G) SC(G) (DAP)
3
SC (A)(G)
1
ST (W)(PSTM)
1
SC (A)(W)(PSTM)
TOTAL
73
1
ST (G)
TOTAL
120
GT (G)
21
5
GT (G) PSTM
(vi)
GT (W)
10
(ix)
GT (G)
2
GT (W) PSTM
1
1
GT (G) (HH) GT (G) PSTM
2
GT (G) BC (OBCM) (G) GT (W)
16
1
GT (W) PSTM
1
GT (G) PSTM
5
BC (OBCM) (G) (PSTM)
1
GT (W) (LV)
1
1
GT (W)
8
GT (W) BC (OBCM) (W)
Junior Architect
BC (OBCM) (G)
1
GT (G) (HI) BC (OBCM) (W) (PSTM)
1
1
1
BC (G) (HH )
2
BC (OBCM) (G) BC (OBCM) (G) BC (OBCM)(G)(PSTM)
2
BC (M) (G)
2
BC (OBCM) (W)
1
BC (OBCM) (W)
2
BC (M) (W)
2
1
2
MBC/DC (G)
4
MBC/DC (G)
13
3
MBC/DC (G)
1
MBC/DC (W)
2
MBC/DC (W)
1
MBC/DC(G) (PSTM)
(vii) Assistant Engineer (Civil)(Highways)
SC (G)
2
SC (G)
1
SC (G) (PSTM) MBC/DC (W)
SC (G) (PSTM)
2
MBC/DC (W) (PSTM)
1
SC (W)
1
SC (W)
1
MBC/DC (G) (HI/HH)
1
SC (A)(G)(PSTM)
1
SC (G) SC (W)(PSTM)
10
Assistant Director of Industrial Safety and Health
TOTAL
15
TOTAL
26
2
SC (G) (PSTM)
5
SC (W)
1
SC (G) (HH)
3
SC (A)(G)
1
SC (A)(W)(PSTM)
1
ST (G)
TOTAL
123
5
Abbreviations:-
GT- General Turn; BC(OBCM) - Backward Class (Other than Backward Class Muslims); BC-M - Backward Class
Muslims; MBC/DC - Most Backward Class / De-notified Community; SC - Scheduled Caste; SC(A) -
Scheduled Caste - Arunthathiar; ST –Scheduled Tribes; G – General; W – Women; PSTM- Persons Studied
in Tamil Medium LD-Loco-motor Disability (O.A-One Arm, OL-One Leg, BL-Both Legs, BA-Both Arms, OAL-One
Arm One leg, BLOA-Both Leg One Arm, BABL – Both Arm Both leg)/LC-Leprosy Cured/DF-Dwarfism/AC-Acid
attack victims HI-Hearing Impaired/HH-Hard of Hearing DAP - Differently Abled Persons.
Note
Refer Annexure-V of this notification regarding tentative timeline for the
recruitment process.
4.QUALIFICATIONS
(A) AGE LIMIT (as on 01.07.2019)
Maximum Age
Category of Applicants
SCs, SC(A)s, „Others‟ [i.e. applicants not
Sl. STs, MBCs/DCs, belonging to SCs, SC(A)s,
Name of the posts
No. BCs, BCMs and STs, MBCs/DCs,
Destitute Widows BC(OBCM)s and BCMs].
of all Castes. (should not have
completed)
1. Assistant Electrical Inspector
39 Years
2. Assistant Engineer
(Agricultural Engineering)
3. Assistant Engineer(Civil),
(Water Resources Department,
PWD)
4. Assistant Engineer(Civil),
(Buildings, PWD)
5. Assistant Engineer(Electrical) 30 Years
(PWD) No Age Limit
Note
“Others” [i.e Applicants not belonging to SCs, SC(A)s, STs, MBCs/DCs, BC(OBCM)s,
BCMs] who have put in five years and more of service in the State/Central Government
are not eligible even if they are within the age limit.
(For further details regarding Age Limit refer para 5 of “Instructions to Applicants” and
Section 3(r) of Tamil Nadu Government Servants (conditions of Service) Act, 2016)
Explanation: No maximum age limit shall mean that the applicants should not have
completed 58 years of age either on the date of notification or at the time of selection
/appointment to the post.
(For further details refer Section 28 of Tamil Nadu Government Servants (conditions of
Service) Act, 2016.
Age Concession
(i) For Differently Abled Persons
(a) No maximum age limit for applicants who belong to SCs, SC(A)s, STs, MBCs/DCs,
BC(OBCM)s and BCMs.
(b) “Others” not belonging to any of the categories mentioned in item“a” above are
eligible for age concession upto 10 years over and above the maximum age limit
prescribed.
(For further details to refer Section 64 of Tamil Nadu Government Servants
(conditions of Service) Act, 2016)
(c) The above mentioned age concession will not apply to the Ex-servicemen applicants
those who have already been recruited to any class or service or category.
(For further details to refer Section 3(j) of Tamil Nadu Government Servants
(conditions of Service) Act, 2016)
7
Applicants should possess the following or its equivalent qualification awarded by any
University or Institution recognized by the University Grants Commission/AITUC as the
case may be.
Sl.
No. Name of the post Qualification
3. Assistant Engineer(Civil),
(Water Resources
Department, PWD)
4 Assistant Engineer(Civil), Standard-III or
(Buildings, PWD) better
5 Assistant
Engineer(Electrical) (PWD) Form prescribed for
Executive post.
6. Assistant Director of
Industrial Safety and Health
Standard-II or
better
7. Assistant Engineer (Civil)
(Highways Department)
8. Assistant Engineer
(Fisheries)
9. Assistant Engineer(Civil) Standard-III or
(Maritime Board) better
10. Junior Architect
For appointment to any of the above posts, colour blindness will be a disqualification.
Night blindness will also be a disqualification for the post of Assistant Director of
Industrial Safety and Health. Candidates with defective vision should produce eye
fitness certificate from a qualified eye specialist.
5. FEES
a) Registration Fee
For One Time Registration (Revised with effect from 01.03.2017 vide Rs.150/-
G.O.(Ms).No.32, Personnel and Administrative Reforms (M) Department,
dated 01.03.2017).
Note
ii) Those who have registered in One-Time Registration system and paid
the registration fee of Rs.150/- and received the registration ID need
not pay the registration fee i.e., Rs.150/- and it is enough to pay the
examination fee alone.
b) Examination Fee Rs.200/-
Note
The Examination fee should be paid at the time of submitting the online
application for this recruitment if they are not eligible for the concession
noted below.
Note:
(i) Applicants who have registered under one - time registration system must pay the
prescribed examination fee for this recruitment. (One – time registration is only to
avail exemption from payment of registration fee for a period of five years from the
date of registration and it will not be considered as prescribed examination fee for
this recruitment)
(ii) Applicants who had already registered under one time registration system by
paying Rs.50/- before 01.03.2017 and having validity are exempted from paying
the registration fee for this recruitment.
EXAMINATION FEE CONCESSION
Applicants can avail exemption from payment of the examination fee as per the
following eligibility criteria:-
Category Concession Condition
Note:
(i) The three / two free chances referred to above are not for EACH POST but for ANY
THREE / TWO APPLICATIONS ONLY. The claim for exemption from payment of
examination fee made in any application which has been rejected / admitted or
withdrawn will be counted as free chance availed.
(ii) Failure to pay the prescribed fee along with the application in-time, will result in the
rejection of application.
(iii) The number of free chances availed by the applicant means, the total number of
free chances hitherto availed by the applicant in his/her earlier applications
submitted to the Commission for any post / recruitment.
(iv) If the examination fee concession claimed in the application is found to exceed the
admissible limits, as announced above, the application will be rejected at any
stage of selection. The number of free chances availed by the applicants will be
counted from all the previous applications submitted through One Time Registration
and / or submitted directly without One Time Registration.
(For further details regarding examination fee concession, refer to para. 12 of the
“Instructions to Applicants”).
Examination fee of Rs.200/- (Rupees Two hundred only) is payable online through
Net Banking / Credit card / Debit card or it can be paid offline at the State Bank of
India / HDFC Bank within two days from the date of submission of online
application by choosing the option in the online application.
Offline mode of payment in the form of demand draft / postal order etc. will not
be accepted and the applications forwarded with such modes of payment will be
summarily rejected.
7.CONCESSIONS:
(i) Concessions with regard to age and examination fees allowed to SCs, SC(A)s, STs,
MBCs/DCs, BC(OBCM)s, BCMs, Destitute Widows, Differently Abled Persons and
Ex-servicemen are given in paras. 12 to 14 of the 'Instructions to Applicants'.
(ii) Persons claiming concessions referred to above and other claims made in the
application have to produce evidence for such claims when called for, otherwise
their application will be rejected.
Note:
Minimum Qualifying
Marks for selection
Subject SCs, SC(A)s,
Maximum
Duration STs, MBCs/ Others
Marks
DCs,
BC(OBCM)s
and BCMs
Total 570
13
Note
i. The questions in Paper-I (Subject Paper) will be set in English only. The questions
in Paper-I for Civil & Mechanical will be set both in Tamil and English. The
questions in Paper-II (General Studies) will be set both in Tamil and English.
ii. The applicants who possess the equivalent educational qualification should choose
the subject to which his/her qualification is declared as equivalent for appearing in
Paper-I (Subject Paper).
iii. The syllabus for Subject Paper (Paper I) &General Studies (Paper II) are furnished
at Annexure-III to this Notification.
Name of the Centre Name of the Centre Centre Name of the Centre Centre
Centre Code Code Code
Note
(i) Request for change of examination centre / venue will not be entertained with (For
further details refer “Instructions to Applicants”).
(ii) The Commission reserves the right to increase/ decrease the number of
examination centres and to re-allot the applicants accordingly.
(iii) Applicants should appear for the written examinations / certificate verification/
Counselling/oral test at their own expenses.
14
Note:
With respect to the posts of Assistant Electrical Inspector & Assistant Engineer in
Agricultural Engineering, firstly the selection will be made for carried forward vacancy.
[Section 27 of the Tamil Nadu Government Servants (Conditions of Service) Act, 2016].
Secondly, the selection will be made for regular vacancies following the rule of
reservation.
C. The selection for appointment to the said post is purely provisional subject to final
orders on pending Writ Petitions, if any pending on the files of the Hon‟ble High
Court of Madras and its Madurai Bench.
i. Except the permitted writing material (i.e. pen), applicants are not allowed to
bring cellular phones, electronic or any other type of calculators, watches
and rings with inbuilt memory notes, recording devices either as a separate
piece or part of something used by the applicant such as watch or ring etc or
any other electronic devices and non - electronic devices such as P&G design
data book, mathematical and drawing instruments, log tables, stencils of
maps, slide rules books, notes, loose sheets, rough sheets, hand bags etc.,
into the examination hall / room.
17
ii. If they are found to be in possession of any such things or instruments, they
will not be allowed to write the examination further, besides invalidation of
answer paper and / or debarment. If it is considered necessary, they will be
subjected to thorough physical search including frisking on the spot (For
further details refer to the “Instructions to Applicants”).
iii. Applicants are advised, in their own interest, not to bring any of the banned
items including mobile phones to the venue of the examination, as
arrangements for safekeeping of the same cannot be assured.
f) Unless specific instruction is given, applicants are not required to submit along with
their application any certificates (in support of their claims regarding age, educational
qualifications, physical qualification, community, physical disability etc.,) which should
be submitted when called for by the Commission. The applicants applying for the
examination should ensure that they fulfil all the eligibility conditions for admission to
the Examination. Their admission at all the stages of examination for which they are
admitted by the Commission viz. Written Examination and Oral Test will be purely
provisional, subject to their satisfying the prescribed eligibility conditions. If, on
verification at any time before or after Written Examination/ Certificate Verification
and Oral Test, it is found that they do not fulfil any of the eligibility conditions, their
candidature for the examination will be liable for rejection / cancellation by the
Commission. (For further details refer to the “Instructions to Applicants”)
g) If any of their claims is found to be incorrect, it will lead to rejection of their
candidature and suitable penal action including debarment.
h) Unfair means strictly prohibited: No applicant shall copy from the papers of any
other applicant or permit his/her papers to be copied or give or attempt to give or
obtain or attempt to obtain irregular assistance of any description. (For further details
refer to the “Instructions to Applicants”)
i) Conduct in Examination Hall: No applicant should misbehave in any manner or
create a disorderly scene in the Examination Hall or harass the staff employed by the
Commission for the conduct of the examination. Any such misconduct will be severely
viewed and penalised. (For further details refer to the “Instructions to Applicants”)
c) Need not send the printout of the online application or any other
supporting documents to the Commission. The application and certificates will
be verified only when the applicants come up for next stage of selection.
Applicants should upload / submit the required documents for proof in respect of all
the claims made in the application with reference to this notification as and when
called for. If the required certificates are not uploaded or submitted by the applicants,
within the stipulated time, their applications will be rejected.
16. LAST DATE FOR SUBMITTING APPLICATION
The Online Application can be submitted upto 28.06.2019 till 11.59 p.m.,after which
the link will be disabled.
17. WARNING
All recruitments by the Tamil Nadu Public Service Commission are purely merit
based.
Tamil Nadu Public Service Commission hereby cautions the candidates against touts
and agents cheating by making false promises of securing job through unfair means.
Tamil Nadu Public Service Commission shall not be responsible or liable for any loss
that may be caused to any candidate on account of indulging in any sort of actions
with such unscrupulous elements.
vr;rhpf;if
Secretary
20
DISCLAIMER
Secretary
21
ANNEXURE-I
EXPERIENCE CERTIFICATE
Yes / No
9 Whether Attendance Register / Attendance Rolls / Pay
Register and other records /available for this Employee :
Office Seal:
Date:
Place: Signature
ANNEXURE-II
1. Agricultural Engineering
2. Architectural Engineering
3. Chemical Engineering
4. Civil Engineering
5. Electrical Engineering.
6. Electronics and Communication
Engineering
7. Mechanical Engineering
8. Production Engineering
9. Textile Engineering
ANNEXURE-III
ARCHITECTURE
PAPER - I (DEGREE STANDARD)
SUBJECT CODE: 324
Egyptian, West Asian, Greek & Roman Architecture – factors influencing the styles,
understanding the architectural character with examples,
Buddhist Architecture.
Evolution of Hindu Temple and Architectural contributions of Dravidian, Pallava,
Chola,Pandya and Indo-Aryan Periods – Outstanding examples of these periods.
Development of Indo - Islamic Architecture – Delhi Sultanate, Provincial & Mughal
styles.
Modern Architecture – various philosophies & schools of thought in Europe, three
generations of modern architects & their contributions.
CIAM, TEAM X, Post Modern Architecture, Deconstruction, High-Tech Architecture,
Critical Regionalism
Architecture of India under Colonial rule
Post independent architecture of India
Contemporary World Architecture & Parametric Design
UNIT – III : MATERIALS AND CONSTRUCTION TECHNIQUES
Properties, characteristics, strengths, manufacturing, components & applications of
materials & methods of construction & detailing for the following -
Stone – Brick & Clay Products – Lime – Cement – Mortar – Timber – Concrete –
Ferrous and Non-Ferrous Metals – Glass – Plastics – Asphalt, Sealants & Adhesives
– Protective and Decorative Coatings – Surface finishing & flooring materials -
Water Proofing and Damps Proofing Materials – Rural Building Materials(Bamboo,
Soil, etc.)
UNIT – IV: BUILDING SYSTEMS AND SERVICES – CURRENT DEVELOPMENT
& NEW TRENDS
Water Supply & Plumbing – Sources, treatment & distribution systems,
Sources of water, Quality of water & treatment methods, water requirements for
different building typologies, Distribution of water – Choice of pipe materials,
fittings & fixtures, Systems of plumbing in all types of buildings Types of pumps –
Reciprocating, centrifugal, deepwell, submersible automatic pumps, sewerage
pump, compressors vacuum pump.
26
Fire safety – Fire detection system, Fire alarm system, Fire fighting systems, Dry
and wet risers, Automatic Sprinklers, Smoke detectors, NBC guidelines.
Origin of Human settlements In India & the rest of the world – River valley
civilizations(Indus Valley, Mesopotamia, Egyptian & Chinese) – Traditional
planning principles in India – Vernacular architecture of India – approaches &
concepts – Classical & Medieval planning in Europe - Evolution of modern planning
concepts – Garden city concept, Neighbourhood concept, Geddesian triad, etc.
Urban Planning & Renewal – Master planning, Zoning regulations, SEZ, PUD,
Urban Renewal Plan, Redevelopment, Rehabilitation & Conservation, JNNURM.
DCR, CRZ for coastal areas.
Issues in contemporary Urban planning.
27
Climate & Human comfort, Solar Control, Heat flow through materials & building
envelope design, Air movement patterns through natural & built forms, Design
strategies for different climate types.
Energy Efficiency – Importance & Significance, Passive Heating & Cooling
techniques, case studies, day Lighting & Natural ventilation, Use of Renewable
energy systems – Current & future trends.
28
Architectural profession – Code of conduct & ethics, role of COA & IIA – Architect‟s
Services, Scale of fees, Architectural Competitions - Tender & Contracts – Legal
aspects – Important Legislations & current trends.
------
29
Farm machinery - Primary tillage implements – Mould board plough, disc plough
and chisel plough - Secondary tillage implements – Cultivators, harrows and rotary
tillers - Land shaping machinery – Leveller, ridger and bund former - Sowing and
transplanting – Seed drills, planters and rice transplanters - Interculture
implements - Plant protection equipment – Sprayers and dusters - Harvesting,
threshing and combining equipment - Machinery for earth moving and land
development - Machinery for horticulture, agro-forestry and forages – Haulage of
agricultural and forest produces - Management of farm machinery - Cost
estimation for farm operations.
UNIT-VIII: UNIT OPERATIONS IN FOOD AND AGRICULTURAL PROCESSING
Heat transfer principles – Conduction, convection and radiation - Types of heat
exchangers - Unit operations – Evaporators - Types - Mechanical separation –
Filtration – Sedimentation – Settling – Centrifugal separation – Cyclone separation
- Size reduction – Mixing – Blending – emulsification - Food processing operations
- Pasteurization – Sterilization – Canning - Retort processing - Extrusion
processing of foods - Methods of drying of foods – Preservation of food by
irradiation - Microwave and dielectric heating - Fats and oil processing – Extraction
methods and equipments - Food packaging – Materials and characteristics –
Suitability - Processing of milk and milk products, packaging of milk - Principles of
refrigeration and applications in food industries – Cold storage of fruits and
vegetables - Design aspects.
31
UNIT - I: ENGINES
Petrol engine – principle and construction – diesel engine- principle and
construction – four stroke and two stroke. Carburettors – types, working principle,
different circuits – compensation circuits. Cooling system – air and water cooling
system- forced circulation and pressure cooling system. Lubrication system –
pressure lubrication – splash lubrication – wet and dry sump lubrication.
Properties of lubricants and coolants. Combustion in SI and CI engines – stages of
combustion –flame propagation – detonation in SI engine and knocking in CI
engines. Combustion chambers – Turbo and super chargers.
UNIT – II: AUTOMOTIVE CHASSIS
Types of chassis layout – various types of frames – front axles – types, stub axle,
front wheel geometry – Ackermann & Davis steering mechanism – steering gear
boxes. Power Assisted steering. Hutch kiss and torque tube drive. Propeller shaft
– final drive – types. Differential –principle and construction details- non slip
differential – differential lock. Rear axle - types – full floating – ¾ quarter & semi.
Wheels and rims – types and construction. Tyres – types and construction details.
Constitution of alloys and phase diagrams, steels, cast iron, TTT diagram, heat
treatment of ferrous and non-ferrous metal, surface modification techniques, non-
metallic materials, mechanical properties and testing, crystal defects and
strengthening mechanisms, conducting and semi conducting materials, magnetic
and dielectric materials, Engineering ceramics, Engineering and commodity
polymers, composites.
UNIT – VII : PRODUCTION TECHNOLOGY
Foundry Technology- types of pattern, moulding and casting methods, design of
castings, defects, Hot and Cold working, metal forming processes- types and
defects, metal joining processes, types and design of weldment, welding
metallurgy, welding defects, Metal cutting, machine tools - center lathe, drilling,
milling, grinding, gear cutting and broaching, unconventional machining
processes, CNC machine tools, Part programming.
--------------------
43
Unit - V: Weaving:
i) Warp winding - random and precision winding, winding parameters
ii) Yarn clearers and Tensioners; yarn splicing
iii) Types of warping - beam and sectional warping, pirn winding process;
iv) Sizing Techniques, sizing of spun and filament yarns
v) Primary, Secondary and Tertiary motions of loom, Loom timings.
vi) Tappet, Dobby and Jacquard shedding;
vii) Principles of Shuttleless Weft insertion systems.
viii) Principles of Circular and Multiphase weaving
ix) Basic woven fabric constructions and its derivatives
46
PAPER-II
GENERAL STUDIES (DEGREE STANDARD/OBJECTIVE TYPE)
(Code No: 003)
UNIT-I: GENERAL SCIENCE
ANNEXURE-IV
I
51
52
ANNEXURE-V
Secretary