Professional Documents
Culture Documents
Results
________________________________________________________________________________________________________________________
________________________________________________________________________________
DEMANDS
Description Pu Mu22 Mu33 Vu2 Vu3
[Kip] [Kip*ft] [Kip*ft] [Kip] [Kip]
----------------------------------------------------------------------------
DL 0.00 0.00 0.00 0.00 0.00
----------------------------------------------------------------------------
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CHECK 1 - Design capacity for bearing on concrete support
Concrete base bearing [Kip] 363.35 0.00 DL 0.00 SCNZ 14.1 XVII.D.5.
CHECK 3 - Design capacity of weld at column base
Weld capacity [Kip] 158.59 0.00 DL 0.00 Cl. 9.7.3.10.3,
Cl 9.7.3.10
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.00
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Major axis
Anchors
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anchor tension [Kip] 20.65 0.00 DL 0.00 NZS 3101:2006 cl. 16.3.1
Breakout of anchor in tension [Kip] 1.49 0.00 DL 0.00 Eq. 17-7,
Cl. 17.5.7.2
Pullout of anchor in tension [Kip] 28.12 0.00 DL 0.00 Cl. 17.5.7.3
Side-face blowout of anchor in tension [Kip] 12.05 0.00 DL 0.00 Cl. 17.5.7.4
Anchor shear [Kip] 8.59 0.00 DL 0.00 ACI 318-08 Eq. D-20,
Sec. D.6.1.3
Breakout of anchor in shear [Kip] 12.55 0.00 DL 0.00 Cl. 17.5.8.1
Pryout of anchor in shear [Kip] 1.29 0.00 DL 0.00 Eq. 17-7,
Cl. 17.5.8.4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------
Maximum bearing pressure 0.00 [psi]
Minimum bearing pressure 0.00 [psi]
Maximum anchor tension 0.00 [Kip]
Minimum anchor tension 0.00 [Kip]
Neutral axis angle 0.00
Bearing length 0.00 [in]
------------------------------------------------------------
Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[in] [in] [Kip] [Kip]
-----------------------------------------------------------------------------
1 -4.72 -2.95 0.00 0.00
2 4.72 -2.95 0.00 0.00
3 4.72 2.95 0.00 0.00
4 -4.72 2.95 0.00 0.00
-----------------------------------------------------------------------------