Professional Documents
Culture Documents
Wire Rope Slings PDF
Wire Rope Slings PDF
S TA N D A R D E Y E & T H I M B L E
THIMBLE & SLIP-THRU THIMBLE
WIRE ROPE SLINGS
S TA N D A R D E Y E & H O O K
S TA N D A R D E Y E & O P E N S WA G E
SOCKET
S TA N D A R D E Y E & C L O S E D
S WA G E S O C K E T
30
Wire Rope Slings
BASKET AT DEGREES
ROPE
DIAMETER VERTICAL 60 45 30
(INCHES) VERTICAL CHOKER BASKET DEGREE DEGREE DEGREE
1/4 .65 .48 1.3 1.1 .91 .65
5/16 1 .74 2 1.7 1.4 1
3/8 1.4 1.1 2.9 2.5 2.0 1.4
7/16 1.9 1.4 3.9 3.4 2.7 1.9
31
Wire Rope Slings
32
Wire Rope Slings
33
Wire Rope Slings
34
Wire Rope Slings
ROPE DIAMETER
(INCHES) VERTICAL CHOKER VERTICAL BASKET
1/4 .61 .45 1.2
5/16 .86 .63 1.7
3/8 1.1 .84 2.3
7/16 1.5 1.1 3.1
1/2 2.2 1.6 4.3
9/16 2.7 2.0 5.4
35
Wire Rope Slings
ROPE DIAMETER
(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 1.1 0.86 0.61
WIRE ROPE SLINGS
2 48 39 28
2-1/8 52 42 30
2-1/4 57 46 33
Rated Capacities Basket Hitch based on D/d ratio of 25
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal
sling diameter.
Rated Capacities based on design factor of 5.
Horizontal Sling angles less than 30 degrees shall not be used.
36
Wire Rope Slings
ROPE DIAMETER
(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 1.6 1.3 0.91
2 72 58 41
2-1/8 78 63 45
2-1/4 85 69 49
Rated Capacities Basket Hitch based on D/d ratio of 25
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal
sling diameter.
Rated Capacities based on design factor of 5.
Horizontal Sling angles less than 30 degrees shall not be used.
37
Wire Rope Slings
ROPE DIAMETER
(INCHES) 60 DEGREE 45 DEGREE 30 DEGREE
1/4 2.1 1.7 1.2
WIRE ROPE SLINGS
2 95 78 55
2-1/8 104 85 60
2-1/4 113 93 66
Rated Capacities Basket Hitch based on D/d ratio of 25
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal
sling diameter.
Rated Capacities based on design factor of 5.
Horizontal Sling angles less than 30 degrees shall not be used.
38
Wire Rope Slings
39
Wire Rope Slings
Braided slings are formed by continuously plaiting, or braiding, several ropes together to form the sling body and both eyes
in a single fabrication operation. Ends of individual ropes are usually hand-tucked or mechanically spliced into component
ropes of the body. Eyes are wrapped and given a rubberized coating since eyes are not braided.
Braided slings are often selected where loads must be rolled or maneuvered, since the design creates friction to grip loads
and resist rotation.
WIRE ROPE SLINGS
42
Wire Rope Slings
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
43
Wire Rope Slings
3 - PA R T T W O - L E G W I R E R O P E C H O K E R S
RATED CAPACITY (TONS)*
SLIP THRU
ROPE 2-LEG CHOKER HITCH CHOKER THIMBLE
DIAMETER SLING SINGLE LEG HOOK
(INCHES) DIA. CHOKER** 60º 45º 30º NUMBER D L W
IPS IWRC #1/8 1/4 0.5 .64 .52 .37 1/4–5/16 1/2 5 2-1/2
IPS IWRC 3/16 3/8 0.8 1.1 .87 .61 3/8 1/2 5 2-1/2
IPS IWRC 1/4 1/2 1.5 1.9 1.5 1.1 1/2 5/8 6 3
IPS IWRC 5/16 5/8 2.3 2.9 2.4 1.7 5/8 3/4 5-1/2 2-3/4
IPS IWRC 3/8 3/4 3.3 4.2 3.4 2.4 3/4 1 8 4
IPS IWRC 7/16 7/8 4.4 5.7 4.6 3.3 7/8–1 1 8 4
IPS IWRC 1/2 1 5.7 7.3 6.0 4.2 7/8–1 1 8 4
IPS IWRC 9/16 1-1/8 5.0 9.2 7.5 5.3 1-1/8–1-1/4 1 8 4
IPS IWRC 5/8 1-1/4 6.1 11 9.3 6.6 1-1/8–1-1/4 1 8 4
IPS IWRC 3/4 1-1/2 8.7 16 13 9.4 1-3/8–1-1/2 1-1/2 12 4
# Made with 7 x 19 Galvanized component rope.
* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.
** See Choker Hitch Rated Capacity Adjustment.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.
Rated Capacities based on design factor of 5.
Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
44
Wire Rope Slings
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
45
Wire Rope Slings
F L AT B R A I D
WIRE ROPE SLINGS
6 - PA R T
RATED CAPACITY (TONS)*
ROPE WIDTH THICKNESS BASKET HITCH SLIP THRU HEAVY
DIAMETER OF OF CHOKER EYE THIMBLE THIMBLE
(INCHES) BODY BODY VERTICAL HITCH** 60º 45º 30º A B ST HT
# 3/32 7/16 1/4 0.42 0.37 0.84 0.73 0.59 0.42 2 4 W-2 1/4
# 1/8 9/16 3/8 0.84 0.74 1.7 1.5 1.2 0.84 3 6 W-2 5/16
# 3/16 13/16 1/2 1.4 1.2 2.8 2.4 2.0 1.4 4 8 W-3 1/2
# 1/4 1-1/8 11/16 2.5 2.2 4.9 4.3 3.5 2.5 5 10 W-4 5/8
# 5/16 1-3/8 7/8 3.8 3.4 7.7 6.7 5.4 3.8 6 12 W-4 3/4
# 3/8 1-11/16 1 5.5 4.8 11.0 9.5 7.8 5.5 7 14 W-5 7/8
7/16 2 1-3/16 7.5 6.5 15.0 13.0 11.0 7.5 8 16 W-5 1
IPS IWRC
1/2 2-1/4 1-5/16 9.7 8.5 19.0 17.0 14.0 9.7 9 18 W-6 1-1/8
9/16 2-1/2 1-1/2 12.0 11.0 24.0 21.0 17.0 12.0 10 20 W-6 1-3/8
5/8 2-13/16 1-11/16 15.0 13.0 30.0 26.0 21.0 15.0 11 22 W-7 1-1/2
3/4 3-3/8 2 22.0 19.0 43.0 37.0 30.0 22.0 12 24 W-8 1-5/8
7/8 4 2-5/16 29.0 25.0 58.0 50.0 41.0 29.0 14 28 W-9 2
1 4-1/2 2-11/16 38.0 33.0 75.0 65.0 53.0 38.0 16 32 W-10 –
# Made with 7 x 19 Galvanized component rope.
* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.
** See Choker Hitch Rated Capacity Adjustment.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.
Rated Capacities based on design factor of 5.
Sling angles less than 30 degrees shall not be used.
ALL CAPACITIES IN TONS OF 2,000 LBS. ALL EYE AND FITTING DIMENSIONS IN INCHES.
46
Wire Rope Slings
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
47
Wire Rope Slings
ROUND BRAID
WIRE ROPE SLINGS
8 - PA R T
RATED CAPACITY (TONS)*
ROPE SLING BASKET HITCH SLIP THRU HEAVY
DIAMETER DIAMETER CHOKER EYE THIMBLE THIMBLE
(INCHES) (INCHES) VERTICAL HITCH** 60º 45º 30º A B ST HT
# 3/32 7/16 .56 0.49 1.1 0.97 0.79 0.56 2 4 W-2 5/16
# 1/8 9/16 1.1 1.0 2.2 1.9 1.6 1.1 3 6 W-2 3/8
# 3/16 13/16 1.9 1.6 3.7 3.2 2.6 1.9 4 8 W-3 1/2
# 1/4 1-1/8 3.3 2.9 6.6 5.7 4.7 3.3 5 10 W-4 3/4
# 5/16 1-3/8 5.1 4.5 10.0 8.9 7.3 5.1 6 12 W-5 1
# 3/8 1-11/16 7.3 6.4 15.0 13.0 10.0 7.3 7 14 W-5 1-1/8
7/16 2 10.0 8.7 20.0 17.0 14.0 10.0 8 16 W-6 1-1/4
IPS IWRC
1/2 2-1/4 13.0 11.0 26.0 22.0 18.0 13.0 9 18 W-7 1-3/8
9/16 2-1/2 16.0 14.0 32.0 28.0 23.0 16.0 10 20 W-7 1-1/2
5/8 2-13/16 20.0 18.0 40.0 35.0 28.0 20.0 11 22 W-8 1-3/4
3/4 3-3/8 29.0 25.0 57.0 50.0 41.0 29.0 12 24 W-9 2
7/8 4 39.0 34.0 78.0 67.0 55.0 39.0 14 28 W-10 –
1 4-1/2 50.0 44.0 101.0 87.0 71.0 50.0 16 32 W-10 –
# Made with 7 x 19 Galvanized component rope.
* Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.
** See Choker Hitch Rated Capacity Adjustment.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.
Rated Capacities based on design factor of 5.
Sling angles less than 30 degrees shall not be used.
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
48
Wire Rope Slings
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
49
Wire Rope Slings
LEN
GTH
WIRE ROPE SLINGS
8 - PA R T
RATED CAPACITY (TONS)* ALLOY
ROPE OBLONG LINK HOOK
DIAMETER WWL
(INCHES) 60º 45º 30º D L W TONS** E R
# 3/32 0.97 0.79 0.56 1/2 5 2-1/2 3/4 15/16 3-7/32
# 1/8 1.9 1.6 1.1 1/2 5 2-1/2 1-1/2 1-1/16 4-3/32
# 3/16 3.2 2.6 1.9 3/4 5-1/2 2-3/4 3 1-1/2 5-3/4
# 1/4 5.7 4.7 3.3 1 8 4 5 1-7/8 7-3/8
# 5/16 8.9 7.3 5.1 1 8 4 AH-7 1-7/8 7-3/8
# 3/8 13.0 10.0 7.3 1-1/4 8-3/4 4-3/8 10 2-1/2 10-1/16
IPS IWRC
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
50
Wire Rope Slings
MECHANICAL SPLICE
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
51
Wire Rope Slings
LENGTH Rated Capacities Basket Hitch based on D/d ratio of 5 where "d" = diameter
of the finished grommet.
Rated Capacities based on pin diameter no smaller than 5 times the body
diameter.
Rated Capacities based on design factor of 5.
Horizontal Sling angles less than 30 degrees shall not be used.
52
Wire Rope Slings
E P O X Y C O M P O U N D S P E LT E R S O C K E T
ROPE
Epoxy compound is standard as the bonding medium DIAMETER VERTICAL
surrounding wires inside the socket. Steel forgings are used for (INCHES) VERTICAL BASKET
rope sizes 1/2" through 1-1/2", and cast steel fittings for larger 1/2 2.7 4.9
sizes. Larger than 4" available on special order. Assembly length 9/16 3.4 6.2
is measured from centerline of pin for open sockets and bearing 5/8 4.1 7.6
point for closed sockets. 3/4 5.9 11
53
Wire Rope Slings
7/16 2.04
from centerline of pins for both open and closed sockets. 1/2 2.66
9/16 3.36
LENGTH
54
Wire Rope Slings
55
Wire Rope Slings
T- 1 T R I - B R A I D S L I N G – S I N G L E P LY
Standard Eye/Eye Sling – Single Leg
Application: General purpose sling for straight or basket hitches.
T- 2 T R I - B R A I D S L I N G – S I N G L E P LY
Single Leg - With Sliding Choker Hook and Thimble Bottom
Application: Pipe, bundles, bars, castings, lumber - any type of load that can utilize a choker hook.
56
Wire Rope Slings
T- 3 D T R I - B R A I D S L I N G – D O U B L E P LY
Single Leg - Two Parts (2 ply) Spliced Together Side-by-Side
Application: When higher capacity are needed (2 ply) such as for locomotives, generators, pressure vessels, etc.
T- 4 D T R I - B R A I D S L I N G – D O U B L E P LY
Single Leg - Top eye 2-parts Spliced Together with Double Ply Body with Sliding Choker Hook and Thimble Bottom
Application: When higher capacity are needed. More flexibility is provided for choking smaller diameter loads.
57
Wire Rope Slings
T- 5 T R I - B R A I D S L I N G – D O U B L E P LY
Single Leg - 2 Side-by-Side Parts with Crescent Thimble in Bottom Loop
Application: Gives move stability than single part for handling such loads as tanks, coils, castings, barrels and boxes.
T- 6 T R I - B R A I D S L I N G – S I N G L E P LY
2-Leg Bridle Sling with Equalizing Thimble Top and Hooks Bottom
Application: For oddly shaped loads - high one end, low other - legs adjust and equalize.
58
Wire Rope Slings
T- 7 D T R I - B R A I D S L I N G – D O U B L E P LY
2-Leg Bridle Sling - Double Ply with Link Top and Hooks with Thimbles Bottom
Application: When higher capacities are needed.
T- 8 T R I - B R A I D S L I N G – S I N G L E P LY
2-Leg Bridle Sling with Link Top and Sliding Choker Hooks with Thimbles Bottom
Application: Helps eliminate load rotation and is better suited for handling pipe, bars, timber, tanks, castings and other
loads which run in long lengths.
59
Wire Rope Slings
T- 9 T R I - B R A I D S L I N G – S I N G L E P LY
2-Leg Double Loop Bridle Sling – Link Top and No Hooks
Application: Well suited for handling sheet steel, bar stock, lumber, structural shapes, flasks and castings.
T- 1 2 T R I - B R A I D S L I N G – S I N G L E P LY
Standard 2-Leg Bridle Sling – Link Top/Hooks Bottom
Application: Lifting machinery, castings, motors and aircraft assemblies.
60
Wire Rope Slings
T- 1 3 T R I - B R A I D S L I N G – S I N G L E P LY
Standard 3-Leg Bridle Sling – Link Top/Hooks Bottom
Application: Lifting dies, castings and assemblies which must be placed carefully, sometimes in difficult locations.
T- 1 4 T R I - B R A I D S L I N G – S I N G L E P LY
Standard 4-Leg Bridle Sling – Link Top/Hooks Bottom
Application: Use when extra stamina is needed for heavy, bulky loads such as ship sections, planer beds, founders molds,
pressure vessels, etc.
61