Professional Documents
Culture Documents
CYCLE TEST – I
1. Define camber and explain its effects on the vehicle body briefly.
2. The front axle of a car has pivot centers 1.1m apart. The length of each
steering arm is 150mm, while the track rod is 1m long. Calculate the
wheel base for perfect rolling of the car wheels when the inner wheel stub
axle is at 55° to the rear Centre line.
3. What is meant by stub axle? Draw the schematic layout of different types
of stub axles.
1. What are the components of the front axle system? Describe each
component briefly.
SRM UNIVERSITY
CYCLE TEST – I
2. The wheel base of a car is 2.7m and pivot centers are at 1m. The wheel
track is 1.2m. Calculate the correct angle of outside lock and turning circle
radius of the outer front wheel and inner rear wheels when the angle of
inside lock is 40°.
3. What is meant by kingpin inclination and how does it differ from steering
axis inclination?
CYCLE TEST – I
1. Define toe-in and toe-out. Explain its effects on vehicle body briefly.
2. What is meant by stub axle? And draw the layout of different types of
stub axles.
3. Explain briefly about understeer and over steer.
1. Explain about the conditions for true rolling of wheels with respect to
steering angle and derive the equations for the same.
SRM UNIVERSITY
CYCLE TEST – I
1. Mention the merits and demerits of Davis steering mechanism over the
Ackerman steering mechanism.
2. What is meant by anti-Ackerman steering system? Mention its
application, merits and demerits.
3. The front axle of a car has pivot centers 1.1m apart. The length of each
steering arm is 150mm, while the track rod is 1m long. Calculate the
wheel base for perfect rolling of the car wheels when the inner wheel
stub axle is at 55° to the rear Centre line.