Professional Documents
Culture Documents
ITP Welding Plan CPC
ITP Welding Plan CPC
ITP is the minimum requirement of the activities for quality control and inspection of the field
construction work. This Inspection and Testing Plan outline the extent of witness inspection and its
reporting.
CONFLICTING REQUIREMENTS
Should conflicts exist between this specification and other documents, the following order of
precedence shall govern:
1. Scope of Work
2. Data Sheets
3. This Specification
4. Other Company Specification
5. Other Referenced Publications
6. Approved for Construction Drawings
7. Vendor’s Code
COORDINATION
Quality Control and Inspection by CONTRACTOR
For the items marked with “ SW “ and “ W “ under column “CONTRACTOR”, the quality control
and inspection will be conducted by CONTRACTOR at their own responsibility. However,
COMPANY shall have the right to inspect any works done by CONTRACTOR or Vendor at any
time (except for “ W ”, a written notification from CONTRACTOR is required).
Inspection Hold Point
For item marked with “ H “ under column of COMPANY and CONTRACTOR, CONTRACTOR
shall notify COMPANY in writing of the inspection scheduled date and time. Witnessing shall be
jointly performed by CONTRACTOR and COMPANY. CONTRACTOR can not proceed the next
work step activity until the inspection and measurement or test has been witnessed and approved by
all attending parties.
Notification of Inspection
CONTRACTOR shall give a written notification to COMPANY for attending the inspection/testing.
Document Approval
For item marked with “ A “ under column “COMPANY”, CONTRACTOR shall submit documents,
drawing, etc. to COMPANY. For item marked with “ A “ under column “CONTRACTOR”, Vendor
shall submit documents, drawing, etc. to CONTRACTOR for approval. Inspection shall not be
conducted before COMPANY approves the required documents.
Document Review
For item marked with “ R “ under column “COMPANY”, CONTRACTOR will submit documents,
drawing, etc. to COMPANY for review / comment. For item marked with “ R “ under column
“CONTRACTOR”, Vendor shall submit documents, drawing, etc. to CONTRACTOR for review /
comment.
Document Verification
For item marked with “ D “ under column “COMPANY”, CONTRACTOR shall submit documents,
drawing, etc. to COMPANY for a report and/ or comments (if required). CONTRACTOR shall
accommodate COMPANY’s comments (if any). For item marked with “ D “ under column
“CONTRACTOR”, Vendor shall submit documents, drawing, etc. to CONTRACTOR for
verification and review and or report.