Professional Documents
Culture Documents
LS 14250
Benefits
Cell size references ½ R6 – ½ AA
l
High voltage response, stable
during most of the lifetime of Electrical characteristics
the application
(typical values relative to cells stored for one year or less at + 30 °C max.)
l
Wide operating temperature
Nominal capacity 1.20 Ah
range (- 60°C/+ 85°C)
(at 1 mA + 20 °C 2.0 V cut-off. The capacity restored by the cell varies
l
Low self-discharge rate according to current drain, temperature and cut-off)
(less than 1 % per year of
Open circuit voltage (at + 20°C) 3.67 V
storage at + 20 °C)
Nominal voltage (at 0.1 mA + 20°C) 3.6 V
l
Easy integration into compact
systems Nominal energy 4.32 Wh
l
Superior resistance to Pulse capability: Typically up to 100 mA
atmospheric corrosion (100 mA/0.1 second pulses, drained every 2 mn at + 20 °C from
undischarged cells with 10 µA base current, yield voltage readings above
Key features 3.0 V. The readings may vary according to the pulse characteristics, the
temperature, and the cell’s previous history. Fitting the cell with a capacitor
l
Stainless steel container may be recommended in severe conditions. Consult Saft)
and end caps Maximum recommended continuous current 35 mA
(low magnetic signature) (Higher currents are possible, consult Saft)
l Hermetic glass-to-metal sealing
Storage (recommended) + 30°C (+ 86°F) max
l Non-flammable electrolyte (for more severe conditions, consult Saft)
l Compliant with IEC 60086-4
Operating temperature range - 60°C/+ 85°C
safety standard and (Operation above ambient T may lead to reduced capacity and (- 76°F/+ 185°F)
IEC 60079-11 intrinsic safety lower voltage readings at the beginning of pulses. Consult Saft)
standard (class T4 assignment)
Physical characteristics
l Underwriters Laboratories (UL)
Component Recognition Diameter (max) 14.55 mm (0.57 in)
l Tollgate systems
l Memory back-up
l Tracking systems
l Automotive electronics
l Professional electronics
September 2009
LS 14250 3.7
Voltage plateau versus Current and Temperature (at mid-discharge)
3.6
3.5 + 70°C
3.4 + 20°C
Ø 14.44 ±
0.11
24.65 ± 0.5 Typical discharge profiles at + 20°C
0.4 ± 0.1
3.7
3.5
3.3
Cell voltage (V)
Ø 7.5 ± 0.1
(flat area) 3.1
7.5 kOhms/0.5 mA
400 Ohms/8.5 mA
3 kOhms/1.2 mA
2.7
56 Ohms/54 mA
2.5
2.3
2.1
1.9
0.1 1 10 100 1000 10000
Time (hours)
900
800
- 20°C
Warning 700
600
l
Fire, explosion and burn hazard. 500
l
Do not recharge, short circuit, 400 - 40°C
crush, disassemble, heat above 300
200
100°C (212°F), incinerate,
100
or expose contents to water. 0
l
Do not solder directly to the cell 0.01 0.1 1 10 100
(use tabbed cell versions instead). Current (mA)
Doc. No 31072-2-0909
Saft Information in this document is subject to change without notice
Specialty Battery Group and becomes contractual only after written confirmation by Saft.
12, rue Sadi Carnot For more details on primary lithium technologies please refer to
Primary Lithium Batteries Selector Guide Doc No 31048-2.
93170 Bagnolet - France
Published by the Communications Department.
Tel.: +33 (0)1 49 93 19 18
Photo credit: Saft
Fax: +33 (0)1 49 93 19 69 Société anonyme au capital de 31 944 000
RCS Bobigny B 383 703 873
www.saftbatteries.com Produced by Arthur Associates Limited.