This document provides an overview of Creo Parametric's cabling interface module. The objectives are to understand the cabling interface, create a harness part by designating connectors and entry ports, and generate wire and cable spools to model and route wires and cables between connectors.
This document provides an overview of Creo Parametric's cabling interface module. The objectives are to understand the cabling interface, create a harness part by designating connectors and entry ports, and generate wire and cable spools to model and route wires and cables between connectors.
This document provides an overview of Creo Parametric's cabling interface module. The objectives are to understand the cabling interface, create a harness part by designating connectors and entry ports, and generate wire and cable spools to model and route wires and cables between connectors.
Click below to listen to the audio version (00:40):
Setting Up for Cabling
Module Overview: This module introduces you to Creo Parametric's cabling interface. Using the cabling interface, you create the harness model as well as designate connectors and the entry ports to use for routing wires and cables. You also create the spools to use for the wires and cables.
Objectives: After successfully completing this module, you will be able to: