Professional Documents
Culture Documents
2. Lay the Bowmaster Portable Bow Press alongside the bow and adjust to length (steps 2
and 3 of the Bowmaster instructions) between the Quad Limb Brackets.
3. Slide the Bowmaster cable ends into the slots of the Quad Limb Brackets and turn the
jackscrew just enough to take the slack out of the cable which will hold the Brackets in
place.
4. Pick the bow up and if necessary readjust the brackets so that they are centered on each
limb tip.
5. Continue by following the Bowmaster Portable Bow Press instructions starting at step 6.