Professional Documents
Culture Documents
NN-20500-027P4 (9300 Product Family Parameters Dictionary - NodeB Parameters) 09.05 Preliminary 0809
NN-20500-027P4 (9300 Product Family Parameters Dictionary - NodeB Parameters) 09.05 Preliminary 0809
W-CDMA
Alcatel-Lucent 9300 W-CDMA Product Family -
Parameter Reference Guide - NodeB Parameters
NN-20500-027 09.05 Preliminary September 2008
Wireless Service Provider Solutions
W-CDMA
Alcatel-Lucent 9300 W-CDMA Product Family - Parameter
Reference Guide - NodeB Parameters
Document number: NN-20500-027
Document issue: 09.05
Document status: Preliminary
Product release: OAM06.0
Date: September 2008
PUBLICATION HISTORY
SYSTEM RELEASE OAM06.0
September 2008
Issue 09.05/EN Preliminary
Update after internal review
July 2008
Issue 09.04/EN Preliminary
Update after internal review
April 2008
Issue 09.03/EN Draft
Update for Pre-DR4
April 2008
Issue 09.02/EN Preliminary
Update after internal review
January 2008
Issue 09.01/EN Draft
Update/Creation for V6.0 April-08 portfolio content.
November 2007
Issue 08.03/EN Standard
Update for DR5.
September 2007
Issue 08.02/EN Preliminary
Update after internal review.
August 2007
Issue 08.01/EN Draft
July 2007
Issue 07.03/EN Standard
Update for UA 5.0 / OAM 5.1 Channel Readiness.
February 2007
Issue 07.02/EN Preliminary
Update after internal review.
Resolution of the following CR : Q01453022
November 2006
Issue 07.01/EN Draft
Update for OAM 5.1/UA 5.0 [UMTS 5.1]
Applicability
This publication applies to OAM06.0 System Release.
Audience
This document is intended for installation, operation, engineering and validation personnel, and any
other user who wants to know more about the UTRAN configuration parameters.
Prerequisites
It is recommended that readers become familiar with the following technical documents :
• Alcatel-Lucent 9353 Management System - System Overview (NN-20500-031)
Vocabulary conventions
For a list of UMTS terms used in the publication, refer to the Alcatel-Lucent 9300 W-CDMA Product
Family - Terminology publication.
2 Object/Parameter description
This section gives the description of customer available objects and parameters.
Introduction
Parameters belong to a containing object. Object descriptions can be found in the first volume.
In the volumes 2 to 9, the parameters are grouped by Network Element: CNode, INode, NodeB,
OAM, POC7K, POC15K (each volume is dedicated to 1 Network Element) and by containing object
(those objects being alphabetically sorted for each Network Element).
For further information on the parameters network engineering, please contact your Account
Manager who will support you into getting the UTRAN Parameters User Guide (UPUG) issued by
Alcatel-Lucent Wireless Network Engineering group.
Object description
Each object is presented as follows: Unique Name (Name).
RNC objects have a unique name different from their name.
NodeB and OAM objects have a unique name equal to their name.
In each volume (from volume 2 to 9), the objects are sorted by alphabetical order according to their
Unique Name.
For each object, the following general information are presented:
• presence: the value of this field can be "optional" or "required"
• onlineCreation: the value of this field can be "AllowedWithParent" or "Allowed" or "NotAllowed".
• onlineDeletion: the value of this field can be "AllowedWithParent" or "Allowed" or "NotAllowed".
• verbs: the value of this field can be "add" or/and "delete", and it is used for Passport
provisioning.
• parents: this field gives the list of the containing objects
• children: this field gives the list of the contained objects
• identifiers: this field gives the list of the identifiers, and for each one, the corresponding
IDcategory, IDqualifier, IDscope, Mininstances, Maxinstances as follows:
Name IDcategory IDqualifier IDscope Mininstances Maxinstances
Parameter description
For each parameter, the following fields are presented:
• parameter name
Manufacturer Alcatel-Lucent defines these parameters and they are not accessible for
customer
Customer Re- parameters that can be modified by the customer, but it is strongly recom-
stricted mended to set them according to Alcatel-Lucent specification as their modi-
fications can have performance impacts on WMS
#s
ms
byte/s
cells/sec
dB
dBm
deg
h
Kb
km
meter
MHz
min
ms
number of cells
s
W
Index description
At the end of each volume (from volume 2 to volume 9), two indexes are available summarizing all
the parameters presented in the concerned volume:
– Parameter BD
– Parameter BE
– Parameter BF
support on xCCM
33367 HSPA congestion detection and Yes Yes No
notification (xCEM)
33367 HSPA congestion detection and Yes Yes No
notification (iCEM)
33390 HS-DSCH BLER Target Adjust- Yes No No
ment (xCEM)
33390 HS-DSCH BLER Target Adjust- Yes No No
ment (iCEM)
33391 HS-DSCH Power Adjustment Evol- Yes No No
ution (xCEM)
33391 HS-DSCH Power Adjustment Evol- Yes No No
ution (iCEM)
33602 15 min Node-B counters Yes Yes No
33694 Fair sharing of resources : HSDPA Yes No Yes
vs. DCH (xCEM // RNC: w/o GBR)
33694 Fair sharing of resources : HSDPA Yes No No
vs. DCH (iCEM // RNC: full feature)
33968 NAT-P enhancement (xCCM) Yes Yes No
33968 NAT-P enhancement (iCCM) Yes Yes No
33970 6 sectors softer HO (XCEM) Yes Yes No
33970 6 sectors softer HO (iCEM) Yes Yes No
33970 6 sectors softer HO (RNC5.0A Yes Yes No
merge)
34102 Flexible HSDPA modulation usage Yes Yes No
versus codes (iCEM)
34134 High RSSI Node-B alarm Yes Yes No
34159 STSR3 Node-B configuration Yes No No
34177 IMA Defense support for Alcap Iub No No Yes
4 AAL2Bearer (AAL2Bearer)
Parents:
BTSEquipment - AAL2Bearer
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 32
Links:
Source attribute Target Object Target Attribute
vccId VCC
Parameters:
rdnId
Parameter name rdnId
Domain OAM
Description AAL2Bearer identifier. IuxIfPath,IuxIf shall first be
deleted on RNC before AAL2Bearer instance on
BTS.
Class NA
Presence required
Visibility customer
Unit
Range [0..31]
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 OSI State
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
localBlockingState
Parameter name localBlockingState
Domain BTS
Description This is the local blocking state of the AAL2 BEAR-
ER * Unblocked: the BTS has unblocked the AAL2
BEARER * Blocked: the BTS has blocked the AAL2
BEARE
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
operationalState
Parameter name operationalState
Domain BTS
Description X731 OSI State
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
pathId
Parameter name pathId
Domain BTS
Description The identifier of the AAL type 2 path. AAL type 2
Path: An ATM VCC between two AAL type 2 nodes.
Class 0
Presence required
Visibility customer
Range [1..2147483647]
Data type Decimal
Initial value N.A.
remoteBlockingState
Parameter name remoteBlockingState
Domain BTS
Description This is the remote blocking state of the AAL2
BEARER * Unblocked: the peer entity has un-
blocked the AAL2 BEARER * Blocked: the peer en-
tity has blocked the AAL2 BEARER
Class NA
Presence required
Visibility customer
Range unblocked, blocked
Data type Enumeration
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
vccId
Parameter name vccId
Domain BTS
Description rdn Identifier of the VCC object used for this link.
Class 0
Presence required
Visibility customer
Range VCC
Data type ServiceLink
Initial value N.A.
5 AlcapBearer (AlcapBearer)
Parents:
BTSEquipment - AlcapBearer
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
vccId VCC
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X.731 This parameter is a set of 0 or more of the
following values: *
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
operationalState
Parameter name operationalState
Domain BTS
Description X.731 It represents the ALCAP operability. This at-
tribute has two values:
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
vccId
Parameter name vccId
Domain BTS
Description This is the VCC RDN used by this ALCAP BEARER
Class 0
Presence required
Visibility customer
Range VCC
Data type ServiceLink
Initial value N.A.
6 AntennaAccess (AntennaAccess)
Parents:
BTSEquipment - AntennaAccess
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 15
Links:
Source attribute Target Object Target Attribute
antennaSystemRef Site Sector AntennaSystem
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description AntennaAccess identifier,
Class NA
Presence required
Visibility customer
Unit
Range [0..14]
Data Type Decimal
Initial Value
antennaConnection
Parameter name antennaConnection
Domain BTS
Description Identifies the physical antenna connection on the
DDM of the BTS, One antenna connection is re-
lated to a main and a diversity antenna.
Class 0
Presence required
Visibility customer
Range antennaConnection_1, antennaConnection_2, an-
tennaConnection_3, antennaConnection_4, anten-
naConnection_5, antennaConnection_6, anten-
naConnection_11, antennaConnection_12, anten-
naConnection_13, antennaConnection_14, anten-
naConnection_15, antennaConnection_16, anten-
naConnection_21, antennaConnection_22, anten-
naConnection_23, antennaConnection_24, anten-
naConnection_25, antennaConnection_26, anten-
naConnection_31, antennaConnection_32, anten-
naConnection_33, antennaConnection_34, anten-
naConnection_35, antennaConnection_36, anten-
naConnection_41, antennaConnection_51, anten-
naConnection_61, antennaConnection_101, anten-
naConnection_102, antennaConnection_103, an-
tennaConnection_1011, antennaConnection_1021,
antennaConnection_1031, antennaConnec-
tion_1041, antennaConnection_1051, antennaCon-
nection_1061
Data type Enumeration
Initial value N.A.
Rec val comments In STSR1 configuration it
antennaSystemRef
Parameter name antennaSystemRef
Domain OAM
Description Reference of the associated AntennaSystem.
Class NA
Presence optional
Visibility customer
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 OSI state
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
cellPlanningId
Parameter name cellPlanningId
Domain OAM
Description Pointer to the related FDDCell
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
externalAttenuationDivDl
Parameter name externalAttenuationDivDl
Domain BTS
Description This parameter is a rename of attenuationFeeder-
Div External loss between the Cabinet and the Di-
versity antenna to be taken into account for down-
link.
Class 0
Presence required
Visibility customer
Unit dB
Range [0.0..50.0] step:0.1
Data type Decimal
Initial value 0
externalAttenuationDivUl
Parameter name externalAttenuationDivUl
Domain BTS
Description External loss between the Cabinet and the Diversity
antenna to be taken into account for uplink.
Class 0
Presence required
Visibility customer
Unit dB
Range [0.0..50.0] step:0.1
Data type Decimal
Initial value 0
externalAttenuationMainDl
Parameter name externalAttenuationMainDl
Domain BTS
Description This parameter is a rename of attenuationFeeder-
Main External loss between the Cabinet and the
Main antenna to be taken into account for downlink.
Class 0
Presence required
Visibility customer
Unit dB
Range [0.0..50.0] step:0.1
Data type Decimal
Initial value 0
externalAttenuationMainUl
Parameter name externalAttenuationMainUl
Domain BTS
Description External loss between the Cabinet and the Main an-
tenna to be taken into account for uplink.
Class 0
Presence required
Visibility customer
Unit dB
Range [0.0..50.0] step:0.1
Data type Decimal
Initial value 0
externalDlDelay
Parameter name externalDlDelay
Domain BTS
Description This parameter represent the Downlink delay from
the BTS RF output to the antenna
Class 0
Presence required
Visibility customer
Unit ns
Range [0.000..2080.000] step:8.125
Data type Decimal
Initial value 121.875
Def value comments Default value = 121,875 when tmaAccessType =
tmaUmtsOnly 2100 Default value = 113,75 when
tmaAccessType = NoTma Default value = 211,25
when tmaAccessType = tmaMix Default value =
138,125 when tmaAccessType = tmaUmtsOnly
1900
externalUlDelay
Parameter name externalUlDelay
Domain BTS
Description This parameter represent the Uplink delay from the
antenna to the BTS RF input
Class 0
Presence required
Visibility customer
Unit ns
operationalState
Parameter name operationalState
Domain BTS
Description X731 - OSI state This attribute has two values: -
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
retPresence
Parameter name retPresence
Domain OAM
Description This parameter indicates if a RET device is present
or not for this antennaAccess
Class NA
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
rxCabling
Parameter name rxCabling
Domain BTS
Description This parameter indicates how the BTS is cabled to
the antenna for reception path. In UA04.1, only the
tmaAccessType
Parameter name tmaAccessType
Domain BTS
Description Enumerated indicating if a TMA (Tower Masthead
amplifier) is present and if so, the type of TMA.
Class 0
Presence required
Visibility customer
Range noTma, tmaUmtsOnly, tmaMix
Data type Enumeration
Initial value N.A.
Rec val comments noTma
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
7 BTSCell (BTSCell)
Parents:
BTSEquipment - BTSCell
Child(ren):
EdchConf - HsdpaConf -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
localCellId absolute secondary none 1 12
Links:
Source attribute Target Object Target Attribute
hsxpaResourceId HsXpaResource
paResourceId PaResource
associatedFDDCell RNC NodeB FDDCell
Parameters:
localCellId
Parameter name localCellId
Domain BTS
Description TS 25.401(release 1999) The Local cell Identifier is
used to uniquely identify the set of resources within
rdnId
Parameter name rdnId
Domain OAM
Description BTSCell identifier. relative distinguish name Iden-
tity: identifies the BTS cell within its BTS Equipment
Class NA
Presence required
Visibility customer
Unit
Range [0..12]
Data Type Decimal
Initial Value
antennaConnectionList
Parameter name antennaConnectionList
Domain BTS
Description List of AntennaAccess object identifiers For ex-
ample:In STSR : 1 AntennaAccess, In OTSR with 6
antennas : 3 AntennaAccess
Class 0
Presence required
Visibility customer
Range AntennaAccess
associatedFDDCell
Parameter name associatedFDDCell
Domain OAM
Class NA
Presence required
Visibility manufacturer
Range RNC NodeB FDDCell
Data type ServiceLink
Initial value N.A.
cellPlanningId
Parameter name cellPlanningId
Domain OAM
Description Pointer to the related FDDCell
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
cellProfile
Parameter name cellProfile
Domain BTS
Description Profile of the cell. This parameter is used to provi-
sion future BTS algorithm depending on the cell
profile. In UA04.1, only default value is supported.
Possible values are: 0: NOT CONFIGURED 1:
TU_3 2: TU_50 3: TU_120 13: RA_120 14: RA_250
23: HT_120 Coding 10a + b a = TU (0) or RA (1) or
HT (2) b = 3km/h (1) or 50 km/h (2) or 120 km/h (3)
or 250 km/h (4) The different model are extracted
from 3GPP TS 25.943 TU_x = Typical Urban x km/h
RA_x = Rural Area x km/h HT = Hilly Terrain x km/h
Class 3
Presence required
Visibility customer
Range notConfigured, typicalUrban3kmh, typicalUrb-
an50kmh, typicalUrban120kmh, ruralArea120kmh,
ruralArea250kmh, hillyTerrain12kmh
Data type Enumeration
Initial value notConfigured
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
cellSize
Parameter name cellSize
Domain BTS
Description Represents the size of the cell.
Class 0
Presence required
Visibility customer
Unit km
Range from0to5, from5to10, from10to30, from30to60,
from60to75, from75to90, from90to120,
from120to150
Data type Enumeration
Initial value from5to10
dynamicPersistenceLevel
Parameter name dynamicPersistenceLevel
Domain BTS
Description dynamicPersistenceLevel used by the BTS in the
SIB 7 as defined in 3GPP TS 25.331.
Class 3
Presence required
Visibility customer
Range [1..8]
Data type Decimal
Initial value 1
edchResourceActivation
Parameter name edchResourceActivation
Domain BTS
Description This parameter activates the allocation of EDCH re-
sources for this BTS CELL. * FALSE: no EDCH re-
source is allocated for this BTS CELL * TRUE:
EDCH resource can be allocated for this BTS CELL
(CF parameter EDCH CONF::edchResourceId)
This parameter shall be set to FALSE when the
child object EDCH CONF is not present.
Class 0
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
equipmentMapping
Parameter name equipmentMapping
Domain BTS
Class NA
Presence optional
Visibility customer
Range [Board..Board]
Data type
Initial value N.A.
hsdpaResourceActivation
Parameter name hsdpaResourceActivation
Domain BTS
Description This parameter activates the allocation of HSDPA
resources for this BTS CELL. FALSE: no HSDPA
resource is allocated for this BTS CELL TRUE: HS-
DPA resource can be allocated for this BTS CELL
(CF parameter HSDPA CONF::hsdpaResourceId)
This parameter shall be set to FALSE when the
child object HSDPA CONF is not present.
Class 0
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
hsxpaResourceId
Parameter name hsxpaResourceId
Domain BTS
Class 0
Presence required
Visibility customer
Range HsXpaResource
Data type ServiceLink
Initial value N.A.
localCellGroupId
Parameter name localCellGroupId
Domain BTS
Description A localCellGroup is a group of local cells of a iBTS
associated with the same carrier.
Class 0
Presence required
Visibility customer
Range [0..3]
Data type Decimal
Initial value N.A.
maximumPowerAmplification
Parameter name maximumPowerAmplification
Domain OAM
Description V4.3K - change to reducedMode(30),fullMode(45)
Maximum Authorized power amplification of the PA
Integer: Possible values (for current iBTS) are: (30):
reducedMode (30 W: PA reduced mode) (45): fullM-
ode (45 W: PA full mode) default value = fullMode
reducedMode means that the Power Amplifier for
paRatio
Parameter name paRatio
Domain BTS
Description Percentage of PA power associated with this BTS
cell. The maximum power declared for each BTS
Cell to the RNC will be : Max DL power capability =
(PaRatio /100 * PA Max power capability) + Tx
losses. This max power will be shared between all
BTS cells with same frequency group in one sector
Class 0
Presence required
Visibility customer
Unit %
Range [10..100]
Data type Decimal
Initial value 50
paResourceId
Parameter name paResourceId
Domain BTS
pmmActivation
Parameter name pmmActivation
Domain BTS
Description This parameter is used to activate the PMM Ex-
cessive Power Algorithm
Class 0
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
rssiHighAlarmThreshold
Parameter name rssiHighAlarmThreshold
Domain BTS
Class 3
Presence optional
Visibility customer
Unit dBm
Range [-150.0..-50.0] step:0.1
Data type Signed
Initial value -90.0
rssiUnbalancedMainDivThreshold
rtwpMargin
Parameter name rtwpMargin
Domain BTS
Description This parameter is added to the parameter RTWP-
max given by RNC to obtain the maximum RTWP
limit for which the eDCH system can work properly
without any major problem
Class 3
Presence required
Visibility customer
Unit dB
Range [0.5..2.0] step:0.5
Data type Decimal
Initial value 2
Recommended value 2
rtwpMaxCellLoadCacActivation
Parameter name rtwpMaxCellLoadCacActivation
Domain BTS
Description This parameter is used to activate the UL CAC on
non-EDCH traffic at BTS based on the RTWP
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
rtwpMaxCellLoadNonEdch
Parameter name rtwpMaxCellLoadNonEdch
Domain BTS
Description RTWP load used to perform UL CAC for all traffic
except EDCH based on the RTWP. This parameter
is used only if rtwpMaxCellLoadCacActivation is set
to TRUE. In this case, the CAC will accept rence is
the RTWP learned if the parameter IsRtwpRefer-
enceSelfLearning is set to TRUE.
Class 3
Presence required
Visibility customer
Unit %
Range [0..100]
Data type Decimal
Initial value 50
rtwpReference
Parameter name rtwpReference
Domain BTS
Description Reference of RTWP when the BTS does not re-
ceive any radio signal for this cell. If the parameter
isRtwpReferenceSelfLearning is set to TRUE, this
parameter is only used to initiate the RTWP self
learning feature.
Class 3
Presence required
Visibility customer
Unit dBm
Range [-115.0..-50.0] step:0.1
Data type Signed
Initial value -106.1
rtwpTimeDetection
Parameter name rtwpTimeDetection
Domain BTS
Description This parameter is relative to the maximum time for
which the eDCH system is authorized to work
above the RTWP limit defined by RTWPmax +
RTWPmargin
Class 3
Presence required
Visibility customer
Unit ms
Range [100..400] step:100
Data type Decimal
Initial value 400
Recommended value 400
transportFiberDelay
Parameter name transportFiberDelay
Domain BTS
Class 0
Presence required
Visibility customer
Unit tChips
Range noFiber, 77, 134, 192, 384
Data type Enumeration
Initial value noFiber
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
8 BTSEquipment (BTSEquipment)
Parents:
-
Child(ren):
AAL2Bearer - AlcapBearer - AntennaAccess - Board - BTSCell - BTSEquipmentMIB -
BTSEquipmentSoftware - BTSHsdpaResource - Capacity - CCP - CoolingSystem - CounterFamily -
ExtensionCabinet - ExternalAlarms - HsXpaResource - ImaGroup - InventoryComponent -
IpInterface - IpRan - LocalCellGroup - NATP - NodeBCP - OMCBConnection - PaResource -
PassiveComponent - PCM - PowerSystem - Qaal2Params - R99Resource - RadiusParameters -
RemoteRadioHead - RfCarrier - RouteCes - RtObsSession - SaalUniParams - SiteLan - UserAlarms
- VCC -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
neId relative secondary none 0 *
Links:
Source attribute Target Object Target Attribute
associatedNodeB RNC NodeB
clusterId Cluster
pmClusterId PMCluster
siteName Site
Parameters:
neId
Parameter name neId
Domain OAM
Description This attribute is used to perform the connection
between the installed BTS and the OMC provi-
sionned BTS equipment.
Class NA
Presence required
Visibility customer
Unit
Range [0..25]
Data Type AsciiString
Initial Value
rdnId
Parameter name rdnId
Domain BTS
Description BTSEquipment identifier
Class NA
Presence required
Visibility manufacturer
Unit
Range [0..65534]
Data Type Decimal
Initial Value
userLabel
Parameter name userLabel
Domain OAM
Description user friendly BTSEquipment name, for operator use
only (at MMI)
Class NA
Presence required
Visibility customer
Unit
Range NA
Data Type AsciiString
Initial Value
CCLTimeout
Parameter name CCLTimeout
Domain BTS
Description When a CEM board supporting common channels
becomes in fault, OAM software notifies RNC that
the associated cell is disabled. Then OAM software
waits for this time laps to ask RNC for reconfigura-
tion. Supported values: noCommonChannel-
LossTimeout= immediate reconfiguration, priority is
put on coverage (restore the cell enabled as soon
as possible) commonChannelLossTimeout = give a
chance to the CEM board to appear, so that the re-
configuration will occur on this board; priority is put
on capacity Note that If CEM supports also E-BBU
then cclTimeout is hardcoded to commonChannel-
LossTimeout (ie 3 min) value.
Class 3
Presence required
Visibility customer
Unit min
Range noCommonChannelLossTimeout, commonChan-
nelLossTimeout
Data type Enumeration
Initial value commonChannelLossTimeout
Def value comments Note that If CEM supports also E-BBU then
cclTimeout is hardcoded to commonChannel-
LossTimeout (ie 3 min) value.
OAMProtocol
Parameter name OAMProtocol
Domain BTS
Description Protocol used betwen OMC-B and node B
Class 0
Presence required
Visibility manufacturer
Range SEPE, TROL
Data type Enumeration
Initial value TROL
OAMProtocolVersion
Parameter name OAMProtocolVersion
Domain BTS
Description The protocol release: 32 for TROL3 release 2, 10
pour 1.0
Class NA
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
OAMlinkAdministrativeState
Parameter name OAMlinkAdministrativeState
Domain OAM
Description Represents the administrative state of the link
between the OMC and the BTS (or NodeB).
Class NA
Presence required
Visibility customer
Range locked, unlocked
Data type Enumeration
Initial value locked
alcapActivation
Parameter name alcapActivation
Domain BTS
Description This parameter is used to activate ALCAP manage-
ment for call processing
Class 0
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
alcapBasedIMADefenseActivation
Parameter name alcapBasedIMADefenseActivation
Domain BTS
Description This parameter is used to activate management of
IMA defense based on ALCAP. false: IMA defense
is managed without ALCAP and relies on parameter
IMA GROUP::imaDefenseDelay true: IMA defense
is activated and is managed with ALCAP proced-
ures
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
alcapBasedIMADefenseDelay
Parameter name alcapBasedIMADefenseDelay
Domain BTS
Description This parameter is the delay before reporting the end
of PCM failure to the RNC when alcap-
BasedIMADefenseActivation is set to TRUE. Value
0 means no delay.
Class 3
Presence required
Visibility customer
Unit s
Range [0..300]
Data type Decimal
Initial value 30
aliasName
Parameter name aliasName
Domain OAM
Class NA
Presence optional
Visibility customer
Range NA
Data type UnicodeString
Initial value N.A.
alphaParameter
Parameter name alphaParameter
Domain BTS
Description Number of consecutive ICP cells (IMA control pro-
tocol cells) invalid to be detected to consider the
group as de-synchronized
Class 0
Presence required
Visibility manufacturer
Range icpCellInvalid1, icpCellInvalid2
Data type Enumeration
Initial value N.A.
Def value comments 2 factory value
antennaFaultDetectionActivation
Parameter name antennaFaultDetectionActivation
Domain BTS
Description This parameter is used to activate the antenna
Fault detection algorithm TRUE: algorithm is activ-
ated FALSE: algorithm is deactivated In UA04,1,
only the default value is supported.
Class 0
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
antennaFaultMaxCounter
Parameter name antennaFaultMaxCounter
Domain BTS
Description This parameter is used to configure the algorithm
used for antenna failure detection in particular for
the confirmation of the antenna failure. The antenna
failure is confirmed when the antenna failure
counter reaches this value
Class 0
Presence required
Visibility customer
Range [10..500]
Data type Decimal
Initial value 100
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
antennaPowerMinSamples
Parameter name antennaPowerMinSamples
Domain BTS
Description This parameter is used to configure the algorithm
used for antenna failure detection. It indicates the
Minimum number of samples, used to process the
antenna main/diversity measurements
Class 0
Presence required
Visibility customer
Range [100..20000]
Data type Decimal
Initial value 1000
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
antennaThreshold
Parameter name antennaThreshold
Domain BTS
Description This attribute is used to detect if the BTS antenna is
failed
Class 0
Presence required
Visibility customer
Unit dB
Range [1..100]
Data type Decimal
Initial value 6
associatedNodeB
Parameter name associatedNodeB
Domain OAM
Description Pointer to the NodeB corresponding to that BT-
SEquipment
Class NA
Presence required
Visibility manufacturer
Range RNC NodeB
Data type ServiceLink
Initial value N.A.
asyncLine2InterfaceUsage
Parameter name asyncLine2InterfaceUsage
Domain BTS
Description This parameter indicates how to use the 2nd serial
interface of the GPSAM. Note: The only supported
value is 0
Class 0
Presence required
Visibility customer
Range LineNotUsed, DVBH_OAM_Connection
Data type Enumeration
automaticUpgrade
Parameter name automaticUpgrade
Domain OAM
Description - If set to version information coming from the Bts.
Class NA
Presence required
Visibility customer
Range enabled, disabled
Data type Enumeration
Initial value enabled
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 OSI state
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
bbVersion
Parameter name bbVersion
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..8]
Data type HexString
Initial value 0000FFFF
Rel version comments Release Version Warning: parameter not used by
betaParameter
Parameter name betaParameter
Domain BTS
Description Number of errored consecutive ICP cells (IMA con-
trol protocol cells) to be detected to consider the
group as de-synchronized.
Class 0
Presence required
Visibility manufacturer
Range icpCellError1, icpCellError2, icpCellError3, icp-
CellError4, icpCellError5
Data type Enumeration
Initial value N.A.
Def value comments 2 factory value
btsLoginBannerText
Parameter name btsLoginBannerText
Domain BTS
Class 3
Presence optional
Visibility customer
Range [0..2048]
Data type AsciiString
Initial value N.A.
callPCEMSlotNumber
Parameter name callPCEMSlotNumber
Domain BTS
Description If CallPCommissioningMode is set to commission-
ingCallPMode then this parameter indicates the
CEM board number on which the test should start.
If CallPModeCommissioningMode is set to nomin-
alMode then this parameter is not significant and
should be ignored. Should set before setting the
CallPCommissioningMode
Class 3
Presence required
Visibility customer
Range [0..12]
Data type Decimal
Initial value 1
callPCommissionMode
Parameter name callPCommissionMode
Domain BTS
Description Represents the mode of resource allocation run by
CallP. Possible values : nominalCallP, commission-
ingCallP. It applies to the CallPCEMNumber, this
number should be set first.
Class 3
Presence required
Visibility customer
Range nominalCallPMode, commissioningCallPMode
Data type Enumeration
Initial value nominalCallPMode
cellDegradedStateActivation
Parameter name cellDegradedStateActivation
Domain BTS
Description This parameter is used to activate management
and reporting (to RNC) of a BtsCell in state en-
abled/degraded when HSDPA or/and EDCH service
for a cell is disabled.
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
clusterId
Parameter name clusterId
Domain OAM
Description Reference to its corresponding cluster for further
details on the clusterId object please refers to UMT/
OMC/DD/007615 V02/EN CM XML Format Descrip-
tion
Class NA
Presence required
Visibility customer
Range Cluster
Data type ServiceLink
Initial value N.A.
cpriManagement
Parameter name cpriManagement
Domain BTS
Description This I&C parameter indicates if the RRH connected
to the BTS uses CPRI or not (HSSL) This paramet-
er is only used by iCCM2 and iCCM-U. xCCM does
not use this parameter
Class 0
Presence required
Visibility manufacturer
Range noCpi, cpriV2
Data type Enumeration
Initial value N.A.
dhcpServerPresence
Parameter name dhcpServerPresence
Domain BTS
Description Indicates if there is a DHCP server available for this
BTS to find out OMC
Class 0
Presence required
Visibility manufacturer
Range false, true
Data type Enumeration
Initial value N.A.
e1PcmFrame
Parameter name e1PcmFrame
Domain BTS
Class NA
Presence required
Visibility manufacturer
Range multiFrame, singleFrame, automatic
Data type Enumeration
Initial value N.A.
Def value comments Multiframe is the factory state
ebbuAllocationPriority
Parameter name ebbuAllocationPriority
Domain BTS
Class 3
Presence required
Visibility customer
Range lowerAllHbbu, sameHbbu
Data type Enumeration
Initial value lowerAllHbbu
edchBLIubBandwidth
Parameter name edchBLIubBandwidth
Domain BTS
Description edchBLIubBandwidth corresponding to the maxim-
um bit rate that is supported in the Iub.
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [100..200000] step:100
Data type Decimal
Initial value 200000
edchBLMACdFlowTimer
Parameter name edchBLMACdFlowTimer
Domain BTS
Description edchBLMACdFlowTimer corresponds to the internal
timer to start or re-starts at each time the MAC-d
flow status is set to ORANGE or RED. Typical value
is 500ms.
Class 3
Presence required
Visibility customer
Unit ms
Range [100..10000] step:100
Data type Decimal
Initial value 500
edchBLStepIncrease
Parameter name edchBLStepIncrease
Domain BTS
Description This parameter controls the increase applied to the
reduction factor when Delay build up is detected.
Class 3
Presence required
Visibility customer
Range [0..100]
Data type Decimal
Initial value 10
edchBLStepReductionDelay
Parameter name edchBLStepReductionDelay
Domain BTS
Description When edchBLSupervisionTimer expires, and if the
MAC-d flow is marked as not congested, the reduc-
tion factor is increased by edchBLStepIncrease.
Class 3
Presence required
Visibility customer
Range [0..100]
edchBLStepReductionFrameLoss
Parameter name edchBLStepReductionFrameLoss
Domain BTS
Description When edchBLSupervisionTimer expires, and if the
MAC-d flow is marked as congested because of
delay build up, the reduction factor is reduced by
edchBLStepReductionDelay.
Class 3
Presence required
Visibility customer
Range [0..100]
Data type Decimal
Initial value 20
edchBLSupervisionTimer
Parameter name edchBLSupervisionTimer
Domain BTS
Description When edchBLSupervisionTimer expires, and if the
MAC-d flow is marked as congested because of
frame loss, the reduction factor is reduced by ed-
chBLStepReductionFrameLoss.
Class 3
Presence required
Visibility customer
Unit ms
Range [10..1000] step:10
Data type Decimal
Initial value 100
edchCMActivation
Parameter name edchCMActivation
Domain BTS
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
edchMaxNumberUserEbbu
Parameter name edchMaxNumberUserEbbu
Domain BTS
Description This parameter represents the Maximum number of
EDCHuser (logical channel) allowed per ed-
chResource (E-BBU) 0 means maximum user al-
lowed by software and hardware. If
Class 3
Presence required
Visibility customer
Range [0..65535]
Data type Decimal
Initial value 0
edchMaxNumberUserNodeB
Parameter name edchMaxNumberUserNodeB
Domain BTS
Description This parameter is obsolete.
Class 0
Presence required
Visibility customer
Range [0..65535]
Data type Decimal
Initial value 0
edchMaxNumberUserXcem
Parameter name edchMaxNumberUserXcem
Domain BTS
Description This parameter represents the Maximum number of
EDCH user (logical channel) allowed per XCEM. 0
means maximum user allowed by software and
hardware. If Capa-
edchRateSchedulerOptimisationTimer
Parameter name edchRateSchedulerOptimisationTimer
Domain BTS
Class 3
Presence required
Visibility customer
Range [10..50] step:4
Data type Decimal
Initial value 10
edchSchedulerAlgorithm
Parameter name edchSchedulerAlgorithm
Domain BTS
Class 3
Presence required
Visibility customer
Range roundRobinSlidingWindow, rateScheduling
Data type Enumeration
Initial value rateScheduling
ftpPassword
Parameter name ftpPassword
Domain BTS
Description Password to be used to access the BTS by the FTP
application, this password is encrypted.
Class 3
Presence required
Visibility manufacturer
Range [0..28]
Data type AsciiString
Initial value
gammaParameter
Parameter name gammaParameter
Domain BTS
Description Number of consecutive valid ICP cells (IMA control
protocol cells) to be detected before moving the
group from a pre-synchronized state to a synchron-
ized state.
Class 0
Presence required
Visibility manufacturer
Range icpCellValid1, icpCellValid2, icpCellValid3, icp-
CellValid4, icpCellValid5
Data type Enumeration
Initial value N.A.
Def value comments 1 factory value
getCommonChannelInfo
Parameter name getCommonChannelInfo
Domain BTS
Class NA
Presence optional
Visibility customer
Range [0..2147483647]
Data type Variable[12] List of sequenceValue
Initial value N.A.
getProcessingLoad
Parameter name getProcessingLoad
Domain BTS
Class NA
Presence optional
Visibility customer
Range [1..16]
Data type Variable[23] List of sequenceValue
Initial value N.A.
getRadioPowerInfo
Parameter name getRadioPowerInfo
Domain BTS
Class NA
Presence optional
Visibility customer
Range [0..2147483647]
Data type
Initial value N.A.
getSynchroInfo
Parameter name getSynchroInfo
Domain BTS
Class NA
Presence optional
Visibility customer
Range clockLocal, clockPcm-1, clockPcm-2, clockPcm-3,
clockPcm-4, clockPcm-5, clockPcm-6, clockPcm-7,
clockPcm-8, clockPcm-9, clockPcm-10, clockPcm-
11, clockPcm-12, clockPcm-13, clockPcm-14,
clockPcm-15, clockPcm-16, clockGpsam-1, clockG-
psam-2, clockUnknown
Data type
Initial value N.A.
globalHardwareRef
Parameter name globalHardwareRef
Domain BTS
Description type of sofware of the iBTS
Class NA
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
gpsSyncSourceNumber
Parameter name gpsSyncSourceNumber
Domain BTS
Description number of sources used for GPS synchronisation
Class 0
Presence required
Visibility manufacturer
Range [0..2]
Data type Decimal
Initial value N.A.
hsdpaCodeTreeManagementActivation
Parameter name hsdpaCodeTreeManagementActivation
Domain BTS
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
hsdpaCongestionDelayThresholdATMHigh
Parameter name hsdpaCongestionDelayThresholdATMHigh
Domain BTS
Description This parameter defines the HSDPA congestion
delay detection threshold before considering the
MAC-d flow going over ATM as congested
Class 3
Presence required
Visibility customer
Unit ms
Range [1..5000]
Data type Decimal
Initial value 100
hsdpaCongestionDelayThresholdATMLow
Parameter name hsdpaCongestionDelayThresholdATMLow
Domain BTS
Description This parameter defines the HSDPA decongestion
delay detection threshold before considering the
MAC-d flow going over ATM as non-congested
Class 3
Presence required
Visibility customer
Unit ms
Range [1..5000]
Data type Decimal
Initial value 80
hsdpaCongestionDelayThresholdIPHigh
Parameter name hsdpaCongestionDelayThresholdIPHigh
Domain BTS
Description This parameter defines the HSDPA congestion
delay detection threshold before considering the
MAC-d flow going over IP as congested
Class 3
Presence required
Visibility customer
Unit ms
Range [1..5000]
Data type Decimal
Initial value 100
hsdpaCongestionDelayThresholdIPLow
Parameter name hsdpaCongestionDelayThresholdIPLow
Domain BTS
Description This parameter defines the HSDPA decongestion
delay detection threshold before considering the
MAC-d flow going over IP as non-congested
Class 3
Presence required
Visibility customer
Unit ms
Range [1..5000]
Data type Decimal
Initial value 80
hsdpaCongestionDetection
Parameter name hsdpaCongestionDetection
Domain BTS
Description This parameter controls the activation of the con-
gestion detection on the Node B and the inclusion
by the NodeB of the congestion status in the HS-
DSCH Capacity Allocation
Class 3
Presence required
Visibility customer
Range noCongestion, delayBuildUp, frameLost, both
Data type Enumeration
Initial value both
Recommended value both
hsdpaDeSequencingWaitTimerIP
Parameter name hsdpaDeSequencingWaitTimerIP
Domain BTS
Description This parameter allows to configure a delay before
declaring frame loss. This is used only when HS-
DPA is conveyed over IP.
Class 3
Presence required
Visibility customer
Unit ms
Range [0..100]
Data type Decimal
Initial value 0
hsdpaDelayPerIubReference
Parameter name hsdpaDelayPerIubReference
Domain BTS
Description This parameter controls the activation of the en-
hanced delay build-up detection algorithm on the
NodeB.
Class 3
Presence required
Visibility customer
Range notActivated, activated
Data type Enumeration
Initial value activated
Recommended value activated
hsdpaMaxNumberQueueIdHbbu
Parameter name hsdpaMaxNumberQueueIdHbbu
Domain BTS
Description This parameter is obsolete.
Class 0
Presence required
Visibility customer
Range [0..65535]
Data type Decimal
Initial value 0
hsdpaMaxNumberUserHbbu
Parameter name hsdpaMaxNumberUserHbbu
Domain BTS
Description Maximum number of HSDPA user (logical channel)
allowed per HsdpaResource (H-BBU). 0 meaning
maximum user allowed by software and hardware.
If Capacity.hsdpaNumberUserCapacityLicensing is
not unlimited, then this parameter becomes use-
less.
Class 3
Presence required
Visibility customer
Range [0..65535]
Data type Decimal
Initial value 0
hsdpaMaxNumberUserPerNodeB
Parameter name hsdpaMaxNumberUserPerNodeB
Domain BTS
Description This parameter is obsolete.
Class 0
Presence required
Visibility customer
Range [0..65535]
Data type Decimal
Initial value 0
hsdpaMaxNumberUserXcem
Parameter name hsdpaMaxNumberUserXcem
Domain BTS
Description This parameter represents the Maximum number of
HSDPA user (logical channel) allowed per XCEM. 0
means maximum user allowed by software and
hardware. If Capa-
city.hsdpaNumberUserCapacityLicensing is not un-
limited, then this parameter becomes useless.
Class 3
Presence required
Visibility customer
Range [0..128] step:16
Data type Decimal
Initial value 0
hsdpaNumberOfFrameBeforeCongestion
hsdpaNumberOfFrameBeforeDeCongestion
Parameter name hsdpaNumberOfFrameBeforeDeCongestion
Domain BTS
Description This parameter defines the number of consecutive
HSDPA Iub frames (with consecutive FSN) to re-
ceive before to switch back to
Class 3
Presence required
Visibility customer
Range [1..255]
Data type Decimal
Initial value 10
iRMLCGReportMode
Parameter name iRMLCGReportMode
Domain BTS
Description This parameter indicates how the BTS reports Local
Cell Group to RNC (via NBAP) This parameter in-
dicates how the base Band resources can be
shared on CEM between 2 Local Cell Groups: Pos-
sible value 0: separatedPool: each of the 2 LCG are
reserved with 50% of the D-BBU resourcesBTS re-
ports 1 Local Cell Group to RNC per object Local
Cell Group defined at OMC-B 1: sharedPool: there
is no minimum resource reserved for each LCGBTS
imaFrameLength
Parameter name imaFrameLength
Domain BTS
Class 0
Presence required
Visibility manufacturer
Range frameLength32, frameLength64, frameLength128,
frameLength256
Data type Enumeration
Initial value N.A.
Def value comments frameLength128(2) factory value
imaUsed
Parameter name imaUsed
Domain BTS
Description PMC & IMA record (DI = Drop & Insert) 0= no IMA+
no DI 1= IMA, no DI (V3) 2 = DI, no IMA 3 = DI +
IMA (not V2)
Class 0
Presence required
Visibility manufacturer
Range [0..3]
imaVersion
Parameter name imaVersion
Domain BTS
Description Version of the IMA
Class 0
Presence required
Visibility manufacturer
Range v1_0Version, v1_1Version
Data type Enumeration
Initial value N.A.
Def value comments The factory value corresponds to V1_1
inVccGroup
Parameter name inVccGroup
Domain OAM
Description This parameter is used to automatically set the VPI/
VCI in the RNC-IN, RNC-CN and possibly RNC-AN
(when present) thanks to OCAN Engineering rules.
The default value 0 is used to indicate that no en-
gineering rule was used for the computation of VPI/
VCI. The user must not modify this value independ-
ent of VPI/VCI configuration
Class NA
Presence required
Visibility customer
Range [0..16383]
Data type Decimal
Initial value N.A.
ipAddress
Parameter name ipAddress
Domain BTS
Description IETF RFC 1208 (IP version 4 source IPV4 @
(internet address is a 32-bit address assigned to
ipAddressBts
Parameter name ipAddressBts
Domain BTS
Description IETF RFC 1208 (IP version 4 source IPV4 @
(internet address is a 32-bit address assigned to
hosts using TCP/IP. The synyactic representtaion
for a 32-bit integer consists of four 8-bit numbers
written in base 10 with periods/dots separating
them. Used to represent IP addresses in the Inter-
net as in : 192.67.67.20) used by nodeB in order to
communicate with OMC-B
Class 0
Presence required
Visibility manufacturer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
ipAddressOmcB
Parameter name ipAddressOmcB
Domain BTS
Description IETF RFC 1208 (IP version 4 target IPV4 @
(internet address is a 32-bit address assigned to
hosts using TCP/IP. The synyactic representtaion
for a 32-bit integer consists of four 8-bit numbers
written in base 10 with periods/dots separating
isCEMalphaPresent
Parameter name isCEMalphaPresent
Domain OAM
Class NA
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
isEdchBandwidthLimitationAllowed
Parameter name isEdchBandwidthLimitationAllowed
Domain BTS
Description The parameters is used to activate the E-DCH con-
gestion control algorithm inside the NodeB
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
Recommended value true
isRtwpAdjustmentForRnc
Parameter name isRtwpAdjustmentForRnc
Domain BTS
isRtwpReferenceSelfLearning
Parameter name isRtwpReferenceSelfLearning
Domain BTS
Description Permit to activate or the auto learning of the RTWP
reference level
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
iubLossTimeOut
Parameter name iubLossTimeOut
Domain BTS
Description Time laps to wait before resetting iBTS in case of
prolonged loss of IUB interface if not in radiating
mode. This timer is started when the iBTS is not
connected to any of RNC, OMC-B and TIL (i.e. con-
nected to none of them). Default value = 60 (1 hour)
Note: precision of this timer depends on iBTS/
OMC-B SE/PE connection and disconnection de-
tection. Precision of SE/PE disconnection detection
depends on timer given by OMC-B: typical precision
maskOfPcmTsUsed
Parameter name maskOfPcmTsUsed
Domain BTS
Description BitMask representing the list of Time Slots to use in
case of Drop & Insert configuration. Possible Val-
ues : 0 to 0xFFFFFFFE (TS0 is always used and
switched if needed in D&I config). When T1 will be
supported add a control on Time Slot Range (<=24
instead of 32)
Class 0
Presence required
Visibility manufacturer
Range [32..32]
Data type BitString
Initial value N.A.
maskOfPcmUsed
Parameter name maskOfPcmUsed
Domain BTS
Description Whatever the imaUsed flag, this bit mask has al-
ways one single bit set to 1. This bit represents the
PCM number to use for OAM connection. If many
bits set to 1, the less significant one is selected as
the right one.
Class 0
Presence required
Visibility manufacturer
Range [32..32]
Data type BitString
Initial value N.A.
maxDifferentialDelay
Parameter name maxDifferentialDelay
Domain BTS
Description Differential Delay is a factor of time that cells may
spend on different links due to the length of the
transmission path or delays introduced by interme-
diate equipment
Class 0
Presence required
Visibility manufacturer
Unit ms
Range [1..25]
Data type Decimal
Initial value N.A.
Def value comments 2 factory value
maxNumberSectorsSofterHo
Parameter name maxNumberSectorsSofterHo
Domain BTS
Description The parameter indicates if the BTS shall manage
softer HO on 3 or 6 sectors: If max3Sectors, the
BTS will manage softer HO on 3 cells max (cells re-
ferred by 1 LCG) If max6Sectors, the BTS will man-
age softer HO on 6 cells max, (the 6 cells of the 2
LCG referring the same RF CARRIER)
Class 0
Presence required
Visibility customer
Range max3Sectors, max6Sectors
Data type Enumeration
Initial value max3Sectors
mbmsActivation
Parameter name mbmsActivation
Domain BTS
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
mibSynchronization
Parameter name mibSynchronization
Domain OAM
Description -MIB Synchronization "On": Configuration modifica-
tions are refused by OMC if they cannot be sent to
the NE through an Online Command. -MIB Syn-
chronization Build or Online Creation.
Class NA
Presence required
Visibility customer
Range on, off
Data type Enumeration
Initial value on
minNbOfActiveLinksInGroup
Parameter name minNbOfActiveLinksInGroup
Domain BTS
Description Represents the number of links to be active (both in
Rx and Tx) in the group so that the group is con-
sidered as active.
Class 0
Presence required
Visibility manufacturer
Range [1..1]
modelName
Parameter name modelName
Domain OAM
Description Name of the associated BTSEquipment model
Class NA
Presence required
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
nbPcm
Parameter name nbPcm
Domain OAM
Description number of PCMs
Class NA
Presence required
Visibility customer
Range [1..16]
Data type Decimal
Initial value N.A.
networkService
Parameter name networkService
Domain BTS
Description This attribute is initialised by the detection protocol
and is used for SE/PE TCP communication.
Class NA
Presence required
Visibility manufacturer
Range [0..2147483647]
nodeBArchitecture
Parameter name nodeBArchitecture
Domain BTS
Description This is an integer with identified value indicating the
Bts type, in this release those type are as follows :
Format: Integer composed of 2 pieces of informa-
tion NodeBArchitecture = N1 + 100xN2 N1 repres-
ent the Packaging type of the main cabinet N2 rep-
resents the Packaging type of the extension cabinet
Possible values for N1 are: -(0) UMTS BTS
12010-1-700 -(1) UMTS BTS 12020-1 -(2) UMTS
BTS 12010-1-600 -(3) UMTS BTS 6010 -(4) UMTS
BTS 6020 -(5) UMTS BTS 12010-2 -(6) UMTS BTS
12020-2 -(7) UMTS BTS 1020 -(8) GSM-UMTS
BTS 18010 -(9) GSM-UMTS BTS 18020 -(10)
UMTS dBTS 2U -(11) UMTS BTS 12110 (subway)
(FRS 30800) -(12) UMTS dBTS 6110 -(13) UMTS
dBTS 6120 Note: value 14, to 18 are reserved -(19)
UMTS BTS 12120 -(20) UMTS dNodeB 2U V2
(FRS 33712) -(21) 9312 Compact Outdoor Possible
values for N2 are: -(0) <No extension cabinet> -(1)
UMTS rBTS 6110 AC -(2) UMTS rBTS 6110 DC -
(3) UMTS rBTS 6120 AC -(4) UMTS rBTS 6120 DC
-(5) UMTS rBTS 6120 AC/DC
Class NA
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
note
Parameter name note
Domain OAM
Description Informal comments.
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
omcBPort
Parameter name omcBPort
Domain BTS
Class 0
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
operationalState
Parameter name operationalState
Domain BTS
Description X731 - OSI state This attribute has two values:
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
paPoolingActivation
Parameter name paPoolingActivation
Domain BTS
Class 0
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
paSwitchOffActivation
Parameter name paSwitchOffActivation
Domain BTS
Description This parameter is used to activate the switch off of
the radio part of MCPA when the MCPA is not
used.
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
Class 3 detail A2
pcmChannel16Mode
Parameter name pcmChannel16Mode
Domain BTS
Description This parameter indicates if the 16th channel of the
PCM E1 can be used for traffic or not.
Class 0
Presence required
Visibility manufacturer
Range signallingOrReserved, traffic
Data type Enumeration
Initial value N.A.
pcmE1Adaptation
Parameter name pcmE1Adaptation
Domain BTS
Class NA
Presence required
Visibility manufacturer
Unit ohms
Range adaptation120ohms, adaptation75ohms
Data type Enumeration
pcmE1CrcThreshold
Parameter name pcmE1CrcThreshold
Domain BTS
Class 0
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
pcmLbo
Parameter name pcmLbo
Domain BTS
Class NA
Presence required
Visibility manufacturer
Range [0..32]
Data type AsciiString
Initial value N.A.
pcmProtectionModule
Parameter name pcmProtectionModule
Domain BTS
Class NA
Presence required
Visibility manufacturer
Range false, true
Data type Enumeration
Initial value N.A.
pcmReceiveSensitivity
pcmT1Adaptation
Parameter name pcmT1Adaptation
Domain BTS
Class NA
Presence required
Visibility manufacturer
Unit ohms
Range adaptation100ohms
Data type Enumeration
Initial value N.A.
Def value comments 100 ohms is the factory value
pcmT1CrcThreshold
Parameter name pcmT1CrcThreshold
Domain BTS
Class 0
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
pcmType
Parameter name pcmType
Domain BTS
Class NA
Presence required
Visibility manufacturer
Range pcmT1, pcmE1
Data type Enumeration
Initial value N.A.
perfServerId
Parameter name perfServerId
Domain OAM
Description Cluster Id to the perfserver in charge of this BTS (to
be defined)
Class NA
Presence optional
Visibility manufacturer
Range NA
Data type AsciiString
Initial value UPERFSERV1
pmClusterId
Parameter name pmClusterId
Domain OAM
Description PM Cluster unique identifier
Class NA
Presence optional
Visibility customer
Range PMCluster
Data type ServiceLink
Initial value N.A.
pmObservationPeriod
Parameter name pmObservationPeriod
Domain BTS
Description This parameter gives the period with which the BTS
generates PM files that can be retrieved by PM
server.
Class 3
Presence required
Visibility customer
Unit min
Range 15, 60
Data type Enumeration
Initial value 60
Class 3 detail A2
provisionedSystemRelease
Parameter name provisionedSystemRelease
Domain OAM
Description it is the expected release of the provisioned Net-
work Element. This value is compared to the cur-
rent NE System Release and allows to detect com-
patibility problems (e.g. upgrade required, etcRe-
lease syntax
Class NA
Presence required
Visibility manufacturer
Range NA
Data type AsciiString
Initial value 06_00_00
r99MaxNumberCeXcem
Parameter name r99MaxNumberCeXcem
Domain BTS
Description Maximum number of Channel Element (CE) re-
source allowed for R99 service (Common channel
and dedicated channels). This parameter is applic-
able to "the" pool of XCEM in the NodeB. Value 0
means No CE. If Capa-
city.r99NumberCECapacityLicensing is not unlim-
ited, then this parameter becomes useless.
Class 3
Presence required
Visibility customer
Unit CE
Range [0..65504] step:16
radiusActivationMode
Parameter name radiusActivationMode
Domain BTS
Class 3
Presence required
Visibility customer
Range notActivated, activatedOnIP
Data type Enumeration
Initial value notActivated
rakeMode
Parameter name rakeMode
Domain BTS
Description Layer 1 parameter. Number of fingers.
Class 0
Presence required
Visibility customer
Range classical4, classical8
Data type Enumeration
Initial value classical4
receiveCrc
Parameter name receiveCrc
Domain BTS
Description 0 = not used 1 = used
Class 0
Presence required
Visibility manufacturer
Range [0..1]
Data type Decimal
Initial value N.A.
Def value comments not used factory state
repetitionCommonNbap
Parameter name repetitionCommonNbap
Domain BTS
Description Maximum number of repetition of common NBAP
procedure.
Class 0
Presence required
Visibility customer
Range [0..10]
Data type Decimal
Initial value 3
rmVersion
Parameter name rmVersion
Domain BTS
Description This parameter gives the number y receive fre-
quency of 1 xTRM can be activated on the BTS; 2 =
2 xTRM can be activated with 2 carrier-RX on the
BTS. If Capacity.xtrmCarrierCapacityLicensing is
not unlimited, then this parameter becomes use-
less.
Class 0
Presence required
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value 0
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
runningSoftwareVersion
Parameter name runningSoftwareVersion
Domain OAM
Description Updated during upgrade with upgrade server
Class NA
Presence required
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
rxCdvTPcrVcOmcB
Parameter name rxCdvTPcrVcOmcB
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is used the
tolerance associated to the PCR (Peak Cell Rate).
Not supported in current release
Class 0
Presence required
Visibility manufacturer
Unit ms
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Def value comments 100000 factory value
rxCdvTScrVcOmcB
Parameter name rxCdvTScrVcOmcB
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is the toler-
ance associated to the SCR (Sustainable Cell
Rate). Not supported in current release Current
BTS hardware don't support such a feature, the de-
fault value is then force to 0.
Class 0
Presence required
Visibility manufacturer
Unit ms
Range [0..2147483647]
Data type Decimal
rxDemodulation
Parameter name rxDemodulation
Domain BTS
Description This parameter is reserved to activate/desactivate
L1 algorithm. Bit0: 0: Activate the common Layer1
UL enhancement algorithm (MAP CIRE DOPPLER)
1: do not activate the common activate Layer1 UL
enhancement algorithm Bit 1: 0: H-BBU detection of
the HS-DPCCH presence based on CQI ON 1: H-
BBU detection of the HS-DPCCH presence based
on CQI OFF Bit 2: 0 : enhanced demodulation for
high speed UE OFF 1 : enhanced demodulation for
high speed UE ON Other values are reserved This
parameter is not used by CEM alpha. Default value
=0
Class 0
Presence required
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value 0
rxMbsVcOmcB
Parameter name rxMbsVcOmcB
Domain BTS
Description Forum: af-tm-0056.000 April 1996 "Traffic Manage-
ment Specification It is included in Traffic Descriptor
parameters for Iub VCC. It is the maximum number
of cells that can be sent at PCR (Peak Cell Rate).
Class 0
Presence required
Visibility manufacturer
Unit number of cells
Range [0..2147483647]
Data type Decimal
Initial value N.A.
rxPcrVcOmcB
Parameter name rxPcrVcOmcB
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is used the
tolerance associated to the PCR (Peak Cell Rate).
Not supported in current release
Class 0
Presence required
Visibility manufacturer
Unit cells/sec
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Def value comments 472 factory value
rxScrVcOmcB
Parameter name rxScrVcOmcB
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is the toler-
ance associated to the SCR (Sustainable Cell
Rate). Not supported in current release Current
BTS hardware don't support such a feature, the de-
fault value is then force to 0.
Class 0
Presence required
Visibility manufacturer
Unit cells/sec
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Def value comments 472 factory value
securityMode
Parameter name securityMode
Domain BTS
Description Parameter used to activate BTS security features
Bit meaning * 1st bit used to activate/deactivate the
SITE LAN firewall bit_0 = 0 means IpFilter actived
bit_0 = 1 means IpFilter deactived Default value =
all bits set to 0 In UA04.1, only the default value is
supported.
Class 0
Presence required
Visibility customer
Range [32..32]
Data type BitString
Initial value 00000000000000000000000000000000
serviceCategoryVcOmcB
Parameter name serviceCategoryVcOmcB
Domain BTS
Description For V3.1 iBTS, the supported values are : CBR (0),
VBRrt (1), VBRnrt (2), UBR (3)
Class 0
Presence required
Visibility manufacturer
Range CBR, VBRrt, VBRnrt, UBR, UBRPlus, VBRnrt0,
VBRnrt2, VBRnrt3, UBR0, UBR1, UBR3,
UBRPlus0, UBRPlus1, UBRPlus3
Data type Enumeration
Initial value N.A.
Def value comments UBR factory configuration
siActivityTimer
Parameter name siActivityTimer
Domain BTS
Class 3
Presence required
Visibility customer
Unit TTI
Range [8..48] step:4
Data type Decimal
Initial value 12
siteName
Parameter name siteName
Domain OAM
Description Name of the associated site
Class NA
Presence optional
Visibility customer
Range Site
Data type ServiceLink
Initial value N.A.
subNetworkMask
Parameter name subNetworkMask
Domain BTS
Description IETF RFC 922 & 1878 The network mask strips the
network ID from the IP address, leaving only the
host ID. The network mask is what performs all the
local magic of dividing an IP network into subnet-
works. The network mask for an un-sub-networked
IP network number is simply a dotted quad which
has all the 'network bits' of the network number set
to '1' and all the host bits set to '0'. So, for the three
classes of IP networks, the standard network masks
are:- 255.255.255.0 The way sub-networking oper-
ates is to borrow one or more of the available host
bits and make then make interfaces locally interpret
these borrowed bits as part of the network bits. So
to divide a network number into two subnetworks,
we would borrow one host bit by setting the appro-
priate bit in the network mask of the first (normal)
host bit to '1'. For a C Class address, this would
result in a netmask of
11111111.11111111.11111111.10000000 or
255.255.255.128 For C Class network number of
192.168.1.0, these are some of the sub-networking
options you have:
_________________________________________
_____________________________ No of No of
subnets Hosts/net netmask 2 126 255.255.255.128
(11111111.11111111.11111111.10000000) 4 62
255.255.255.192
(11111111.11111111.11111111.11000000) 8 30
255.255.255.224
(11111111.11111111.11111111.11100000) 16 14
255.255.255.240
(11111111.11111111.11111111.11110000) 32 6
255.255.255.248
(11111111.11111111.11111111.11111000) 64 2
255.255.255.252
(11111111.11111111.11111111.11111100)
_________________________________________
_____________________________ The address
of an interface (such as an Ethernet card or PPP in-
terface on a host, router, print server etc) can have
any value in the host bits except all zero or all 1 is a
network address and with the host bits all 1 the ad-
dress is the broadcast address
Class 0
Presence required
Visibility manufacturer
Range NA
Data type AsciiString
Initial value N.A.
supervisedExternalAlarmMask
Parameter name supervisedExternalAlarmMask
Domain BTS
Description Mask (bit map) giving the operator external alarms
that have to be supervised
Class 3
Presence required
Visibility customer
Range [32..32]
Data type BitString
Initial value 00000000000000000000000000000000
Recommended value 00000000000000000000000000000000
supervisedUserAlarmMask
syncDelay
Parameter name syncDelay
Domain BTS
Class 0
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
syncFallbackOnPcm
Parameter name syncFallbackOnPcm
Domain BTS
Description Synchronization fallback on PCM 0=no, 1=yes
Class 0
Presence required
Visibility manufacturer
Range [0..1]
Data type Decimal
Initial value N.A.
Def value comments Yes (factory state) means that fallback is garanteed
syncMode
systemRelease
Parameter name systemRelease
Domain OAM
Description it represents the functional level of a Network ele-
ment
Class NA
Presence required
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
t1PcmCoding
Parameter name t1PcmCoding
Domain BTS
Class NA
Presence required
Visibility manufacturer
Range b8zsCoding, amiCoding
Data type Enumeration
Initial value N.A.
Def value comments B8Zs is the factory state
t1PcmFrame
Parameter name t1PcmFrame
Domain BTS
Class NA
Presence required
Visibility manufacturer
Range superFrame, extendedSuperFrame
Data type Enumeration
Initial value N.A.
Def value comments ESF is the factory state
tcpPort
Parameter name tcpPort
Domain BTS
Description This attribute is initialised by the detection protocol
and is used for TROL TCP communication.
Class NA
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
telnetPassword
Parameter name telnetPassword
Domain BTS
Description Password to be used to access the BTS by the tel-
net application, this password is encrypted.
Class 3
Presence required
Visibility manufacturer
Range [0..28]
Data type AsciiString
Initial value
testFrequency
Parameter name testFrequency
Domain BTS
Description UARFCN (UTRA Absolute Radio Frequency Chan-
nel Number of the Down Link Frequency used by
the BTS to detect its RF cabling: Nd = 5 *
(Fdownlink MHz). For UMTS Band, valid values are
in [10562 ,10838]. For UMTS1900, valid values are
412, 437, 462, 487, 512, 537, 562, 587, 612, 637,
662, 687 U [9662;9938]
Class 3
Presence required
Visibility customer
Range [0..16383]
Data type Decimal
Initial value N.A.
testPatternProcedure
Parameter name testPatternProcedure
Domain BTS
Class 0
Presence required
Visibility manufacturer
Range false, true
Data type Enumeration
Initial value N.A.
Def value comments False (factory value); The value TRUE is not sup-
ported
tilPassword
Parameter name tilPassword
Domain BTS
Description Password to be used to access the BTS by the TIL,
this password is encrypted.
Class 3
Presence required
Visibility manufacturer
Range [0..28]
Data type AsciiString
Initial value
timerAlcapCellValidity
Parameter name timerAlcapCellValidity
Domain BTS
Description Note: Parameter is not used in this release and the
only allowed value is 0. This timer is used to delay
the BTS impact on all cell on detection of SSCOP
ALCAP disconnection. The BTS will impact all cells
when the ALCAP SSCOP has become disconnec-
ted for timerALCAPCellValidity seconds Value 0
means
Class 3
Presence required
Visibility customer
Unit s
Range [0..3600]
Data type Decimal
Initial value 0
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
timerBtsOmcbNeConnectRequest
Parameter name timerBtsOmcbNeConnectRequest
Domain BTS
Description This timer is the period at which the BTS tries to
connect to OMC-B on the OAM link. Note: decreas-
ing this timer decreases the time for the BTS to re-
connect to OMC-B (after disconnection of the BTS-
OMC-B OAM link). But it may increase the risk of
OMC-B being overloaded by multiple BTS trying to
(re)connect at the same time to OMC-B. Note2: The
BTS uses the default value when it is not built
Class 3
Presence required
Visibility customer
Unit s
Range [20..600]
Data type Decimal
Initial value 180
timerCellImpactNoCcp
Parameter name timerCellImpactNoCcp
Domain BTS
Description The BTS will declare a BTS Cell disable
(operational state disable) when all CCP that can
serve this BTS Cell have been disable during timer-
CellImpactNoCcp seconds Value 0 means scon-
nected for more than timerCellImpactNoCcp
seconds.
Class 3
Presence required
Visibility customer
Unit s
Range [0..3600]
Data type Decimal
Initial value 35
timerCommonNbap
Parameter name timerCommonNbap
Domain BTS
Description Timer used to repeat NBAP common procedure
(AuditRequired, ResetRequest) to RNC on non re-
sponse from RNC.
Class 0
Presence required
Visibility customer
Unit s
Range [5..300]
Data type Decimal
Initial value 40
timerNodeBCPCellValidity
Parameter name timerNodeBCPCellValidity
Domain BTS
Description The BTS will declare internally delete all NBAP con-
figuration from RNC when NODEB-CP becomes
disable (SSCOP disconnection) during timerNodeB-
txCdvTPcrVcOmcB
Parameter name txCdvTPcrVcOmcB
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is used the
tolerance associated to the PCR (Peak Cell Rate).
Not supported in current release
Class 0
Presence required
Visibility manufacturer
Unit ms
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Def value comments 50000 factory value
txCdvTScrVcOmcB
Parameter name txCdvTScrVcOmcB
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is the toler-
ance associated to the SCR (Sustainable Cell
Rate). Not supported in current release Current
BTS hardware don't support such a feature, the de-
fault value is then force to 0.
Class 0
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Def value comments The factory value corresponds to 50000ms
txMbsVcOmcB
Parameter name txMbsVcOmcB
Domain BTS
Description Forum: af-tm-0056.000 April 1996 "Traffic Manage-
ment Specification It is included in Traffic Descriptor
parameters for Iub VCC. It is the maximum number
of cells that can be sent at PCR (Peak Cell Rate).
Class 0
Presence required
Visibility manufacturer
Unit number of cells
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Def value comments 100000 factory value
txPcrVcOmcB
Parameter name txPcrVcOmcB
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is used the
tolerance associated to the PCR (Peak Cell Rate).
Class 0
Presence required
Visibility manufacturer
Unit cells/sec
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Def value comments 236 factory value
txScrVcOmcB
Parameter name txScrVcOmcB
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is the toler-
ance associated to the SCR (Sustainable Cell
Rate). Current BTS hardware don't support such a
feature, the default value is then force to 0.
Class 0
Presence required
Visibility manufacturer
Unit cells/sec
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Def value comments 236 factory value
unknownStatus
Parameter name unknownStatus
Domain OAM
Description X731 OSI state
Class NA
Presence required
Visibility customer
Range unknownstatusfalse, unknownstatustrue
Data type Enumeration
Initial value unknownstatustrue
upgradeStatus
Parameter name upgradeStatus
Domain OAM
Class NA
Presence required
Visibility customer
Range IDLE, DOWNLOAD_REQUESTED, DOWN-
LOAD_COMPLETED, DOWN-
LOAD_IN_PROGRESS, ACTIVA-
TION_IN_PROGRESS, FALL-
BACK_IN_PROGRESS
Data type Enumeration
Initial value IDLE
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..128]
Data type AsciiString
Initial value N.A.
vcOmcB
Parameter name vcOmcB
Domain BTS
Description VCC used by the OMC-B
Class 0
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
vpOmcB
Parameter name vpOmcB
Domain BTS
Description VP used by the OMC-B
Class 0
Presence required
Visibility manufacturer
Range [0..15]
Data type Decimal
Initial value N.A.
xcemBbuMode
Parameter name xcemBbuMode
Domain BTS
Description This parameter is not used by the NodeB. In UA06,
the NodeB is automatically activated in multimode.
Class 0
Presence required
Visibility customer
Range singleModeBbu, multiModeBbu
Data type Enumeration
Initial value multiModeBbu
Rel version comments Release warningThis parameter is not used in this
release
xcemPartialFailureActivation
Parameter name xcemPartialFailureActivation
Domain BTS
Description This parameter is used to activate management of
partial failure of the xCEM board.
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
9 BTSEquipmentMIB (BTSEquipmentMIB)
Parents:
BTSEquipment - BTSEquipmentMIB
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain OAM
Description BTSEquipmentMIB identifier.
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
interfaceVersion
Parameter name interfaceVersion
Domain BTS
Description Version of the ASN1 interface. Initialised from the
config report. Possible values (Integer):
Class NA
Presence required
Visibility manufacturer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
mibBuildNumber
Parameter name mibBuildNumber
Domain BTS
Description Last MIB version number given by the OMC-B dur-
ing the build phase
Class NA
Presence required
Visibility manufacturer
Range [-1..2147483647]
Data type Signed
Initial value N.A.
mibState
Parameter name mibState
Domain OAM
Description Describes the state of the MIB .Initialised from the
config report. No get available on this attribute.
Class NA
Presence required
Visibility customer
Range notBuilt, builtNotUpToDate, builtUpToDate, up-
dateInProgress
Data type Enumeration
Initial value N.A.
10 BTSEquipmentSoftware (BTSEquipmentSoftware)
Parents:
BTSEquipment - BTSEquipmentSoftware
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain OAM
Description BTSEquipmentSoftware identifier.
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
passiveDeliveryName
Parameter name passiveDeliveryName
Domain OAM
Description Backup software version
Class NA
Presence required
Visibility manufacturer
Range NA
Data type AsciiString
Initial value N.A.
runningDeliveryName
Parameter name runningDeliveryName
Domain OAM
Description Software version currently running
Class NA
Presence required
Visibility manufacturer
Range NA
Data type AsciiString
Initial value N.A.
11 BTSHsdpaResource (BTSHsdpaResource)
Parents:
BTSEquipment - BTSHsdpaResource
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 6
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..5]
Data Type Decimal
Initial Value
hsdpaMaxThroughputHbbu
Parameter name hsdpaMaxThroughputHbbu
Domain BTS
Description Maximum throughput in Kb/s for HSDPA traffic
(MAC-hs layer) that can be used by the HSDPA
RESOURCE (that is on a H-BBU of an iCEM).
Class 0
Presence required
Visibility customer
Unit Kbits/s
Range [5400..10800] step:5400
Data type Decimal
Initial value 10800
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
12 Board (Board)
Parents:
BTSEquipment - Board
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 23
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description Board Identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..4294967295]
Data Type Decimal
Initial Value
administrativeState
Parameter name administrativeState
Domain BTS
Description X731 - OSI state This attribute is read-write. It rep-
resents board administration, which operates inde-
pendently of the operability and usage of managed
objects. This attribute has three values: s function
Class 3
Presence required
Visibility customer
Range locked, unlocked, shuttingdown
Data type Enumeration
Initial value unlocked
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 - OSI state It represents the board availability.
An empty set implies that the board is available. It
can have the values: ot used
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
cabinetNumber
Parameter name cabinetNumber
Domain BTS
Description Cabinet number where this board is present
Class NA
Presence required
Visibility customer
Range [0..2147483647]
hardwareRelease
Parameter name hardwareRelease
Domain BTS
Description Indicates the revision level of the equipment 4 AS-
CII char: ttnn tt = 2 spaces for a regular product 1
space + P for a prototype nn = hardware version
Class NA
Presence required
Visibility customer
Range [0..4]
Data type AsciiString
Initial value N.A.
manufacturerInfo
Parameter name manufacturerInfo
Domain BTS
Description Manufacturer information if available of the module.
Class NA
Presence optional
Visibility customer
Range [0..64]
Data type AsciiString
Initial value N.A.
manufacturingDate
Parameter name manufacturingDate
Domain BTS
Description Note: the parameter is optional for compatibility
reason This parameter is set at Manufacturing date
and is not modified Format wwyy with ww = week
number (2 chars) yy = last 2 digits of year number
(2 chars) Example: Week 03 year 2000 is coded
0300
Class NA
Presence optional
Visibility customer
Range [0..4]
Data type AsciiString
Initial value N.A.
moduleApplication
Parameter name moduleApplication
Domain BTS
Description Module application
Class NA
Presence required
Visibility customer
Range gsm, umts, gsm_umts
Data type Enumeration
Initial value N.A.
moduleName
Parameter name moduleName
Domain BTS
Description Name of the RU in the BAAN database set at man-
ufacturing date
Class NA
Presence required
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
moduleSubType
Parameter name moduleSubType
Domain BTS
Description Module sub type
Class NA
Presence required
Visibility customer
Range [0..15]
Data type Decimal
Initial value N.A.
moduleType
Parameter name moduleType
Domain BTS
Description Module type, this represents the board type For ex-
ample : 0x001: CCM 0x026 : iCCM board 0x027 :
iCCM mini back-plane 0x052: gCCM 0x002: CEM
alpha 0x025 : iCEM 64 0x024 : iCEM 128 0x004:
TRM 2100 0x028 : iTRM 2100 0x029 : TRM 1900
0x040 : iTRM1900 0x007: GPSAM / CGPSAM
0x016: MCPA UMTS 0x017: MCPA GSM/UMTS
0x02A : MCPA 1900 0x018: DDM 2100 / DDM1900
0x018 : DDM CR 0x01A: TX splitter 0x04E: DDM-
RK 0x04A: RRH any frequency band 0x04B:
C1OIM 0x04C: C2OIM 0x04D: C3OIM Note: 04)
Class NA
Presence required
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
operationalState
Parameter name operationalState
Domain BTS
Description X731 - OSI state It represents the board operability.
This attribute has two values: -
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
pecCode
Parameter name pecCode
Domain BTS
Description Hardware board Product Engineering Code.
__NTxxNNnnnnnnnn __: two spaces reserved for
future use where NN = Module family and
Nnnnnnnn = Edition number
Class NA
Presence required
Visibility customer
Range [0..16]
Data type AsciiString
Initial value N.A.
positionInShelf
Parameter name positionInShelf
Domain BTS
Description Slot number in the shelf
Class NA
Presence required
Visibility customer
Range [1..255]
Data type Decimal
Initial value N.A.
serialNumber
Parameter name serialNumber
Domain BTS
Description Hardware board construction number.
_____________NNTMxxyyyyyy _____________:
13 blank space reserved for future use NNTM: for
Alcatel-Lucent manufacturer ID (4 char) xx = Manu-
facturing location (2 char) yyyyyy = Serial number
(6 char)
Class NA
Presence required
Visibility customer
Range [0..25]
shelfNumber
Parameter name shelfNumber
Domain BTS
Description Shelf number where this board is present
Class NA
Presence required
Visibility customer
Range [0..10]
Data type Decimal
Initial value N.A.
standbyStatus
Parameter name standbyStatus
Domain BTS
Description X731 - OSI state For active board and none re-
dundant boards, this attribute will be set to
Class NA
Presence required
Visibility customer
Range hotStandby, coldStandby, providingService
Data type Enumeration
Initial value coldStandby
13 CCP (CCP)
Parents:
BTSEquipment - CCP
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 6
Links:
Source attribute Target Object Target Attribute
vccId VCC
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description Communication Control Port identifier.
Class NA
Presence required
Visibility customer
Unit
Range [0..5]
Data Type Decimal
Initial Value
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 - OSI State
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
ccpId
Parameter name ccpId
Domain BTS
Description CCP Identifier for the Communication Control Port
Class 0
Presence required
Visibility customer
Range [1..6]
Data type Decimal
Initial value N.A.
operationalState
Parameter name operationalState
Domain BTS
Description X731 - OSI State
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
vccId
Parameter name vccId
Domain BTS
Description rdn Identifier of the VCC object used for this link.
Class 0
Presence required
Visibility customer
Range VCC
Data type ServiceLink
Initial value N.A.
14 Capacity (Capacity)
Parents:
BTSEquipment - Capacity
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
edchNumberUserCapacityLicensing
Parameter name edchNumberUserCapacityLicensing
Domain BTS
Description Maximum number of EDCH users that the BTS is
allowed to setup.
Class 3
Presence required
Visibility customer
Range { [0..65534],infinite }
Data type MixedDecimal
Initial value infinite
edchThroughputCapacityLicensing
Parameter name edchThroughputCapacityLicensing
Domain BTS
Description Maximum mac-e throughput allowed for EDCH ser-
vice.
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range { [0..65534],infinite }
Data type MixedDecimal
Initial value infinite
getLicensingcapability
Parameter name getLicensingcapability
Domain BTS
Class NA
Presence optional
Visibility customer
Range [0..2147483647]
Data type
Initial value N.A.
hsdpaNumberUserCapacityLicensing
Parameter name hsdpaNumberUserCapacityLicensing
Domain BTS
Description Maximum number of HSDPA users that the BTS is
allowed to setup.
Class 3
Presence required
Visibility customer
Range { [0..65534],infinite }
Data type MixedDecimal
Initial value infinite
hsdpaThroughputCapacityLicensing
Parameter name hsdpaThroughputCapacityLicensing
Domain BTS
Description Maximum mac-hs throughput allowed for HSDPA
service.
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range { [0..65534],infinite }
Data type MixedDecimal
Initial value infinite
paPowerCapacityLicensing
Parameter name paPowerCapacityLicensing
Domain BTS
Description Maximum Power that is allowed to be used for the
MCPA managed by the BTS. Value 65535 means
unlimited capacity
Class 3
Presence required
Visibility customer
Unit W
Range { [0..65534],infinite }
r99NumberCECapacityLicensing
Parameter name r99NumberCECapacityLicensing
Domain BTS
Description Number of Channel Element that the BTS is al-
lowed to allocate for R99 traffic (common or dedic-
ated channels). Value 65535 means unlimited ca-
pacity.
Class 3
Presence required
Visibility customer
Range { [0..65520],infinite } step:16
Data type MixedDecimal
Initial value infinite
rrhCarrierCapacityLicensing
Parameter name rrhCarrierCapacityLicensing
Domain BTS
Description Number supplementary RX carrier allowed for
RRH.Value 0 means that all RRH are mono-carrier
in Reception.
Class 3
Presence required
Visibility customer
Range { [0..65534],infinite }
Data type MixedDecimal
Initial value infinite
rrhPowerCapacityLicensing
Parameter name rrhPowerCapacityLicensing
Domain BTS
Description Maximum Power that is allowed to be used for the
RRH and TRDU managed by the BTS.
Class 3
Presence required
Visibility customer
Unit W
Range { [0..65534],infinite }
Data type MixedDecimal
Initial value infinite
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
xtrmCarrierCapacityLicensing
Parameter name xtrmCarrierCapacityLicensing
Domain BTS
Description Number supplementary RX carrier allowed for
xTRM.
Class 3
Presence required
Visibility customer
Range { [0..65534],infinite }
Data type MixedDecimal
Initial value infinite
15 CoolingSystem (CoolingSystem)
Parents:
BTSEquipment - CoolingSystem
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 2
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description CoolingSystem identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..1]
Data Type Decimal
Initial Value
16 CounterFamily (CounterFamily)
Parents:
BTSEquipment - CounterFamily
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
counterFam- relative primary none 0 15
ilyId
Links:
Source attribute Target Object Target Attribute
Parameters:
counterFamilyId
Parameter name counterFamilyId
Domain BTS
Description CounterFamily identifier
Class 0
Presence required
Visibility customer
Unit
Range [0..14]
Data Type Decimal
Initial Value
rdnId
Parameter name rdnId
Domain BTS
Description CounterFamily identifier on NE interface
Class NA
Presence required
Visibility manufacturer
Unit
Range [0..14]
Data Type Decimal
Initial Value
counterList
Parameter name counterList
Domain BTS
Description Each integer in the list (necessarily not empty) is a
BTS counter id (hence a value greater than 10 000)
as defined in [A1]. When the MIB is built, PM mod-
ule checks the validity of all counter identifiers. In
case an unknown identifier is present the configura-
tion file is refused and the BTS transitions to
Class 0
Presence required
Visibility manufacturer
Range [10000..2147483647]
Data type Variable[20] List of Decimal
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
userSpecificInfo
17 DeviceTable (DeviceTable)
Parents:
BTSEquipment - SiteLan - DeviceTable
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 6
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description DeviceTable identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..5]
Data Type Decimal
Initial Value
deviceIpAddress
Parameter name deviceIpAddress
Domain BTS
Description IP address of device IETF RFC 1208 (IP version 4
target IPV4 @ (internet address is a 32-bit address
assigned to hosts using TCP/IP. The synyactic rep-
resenttaion for a 32-bit integer consists of four 8-bit
numbers written in base 10 with periods/dots separ-
ating them. Used to represent IP addresses in the
Internet as in : 192.67.67.20) used by nodeB in or-
der to communicate with OMC-B
Class 3
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
deviceType
Parameter name deviceType
Domain BTS
Description Man readable string representing the device type
(significant only for TIL) For RETA Device, the nam-
ing must be as follows : RETA XXXXXXX RETA is
the string "RETA " in uppercase followed by 1
space and XXXXXXXX is the name of the RET
manufacturer in uppercase
Class 3
Presence required
Visibility customer
Range [0..128]
Data type AsciiString
Initial value N.A.
dnsServer
Parameter name dnsServer
Domain BTS
Description IP address of DNS server, meaningful only if
Class 3
Presence optional
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
managerAddress
Parameter name managerAddress
Domain BTS
Description IP address of Manager, meaningful only if
Class 3
Presence optional
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
managerFqdn
Parameter name managerFqdn
Domain BTS
Description Fully Qualified Domain Name of the manager, for
instance: mngr1.<domain>, meaningful if
Class 3
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
managerSpec
Parameter name managerSpec
Domain BTS
Class 3
Presence required
Visibility customer
Range fqdnManagerSpec, addressManagerSpec, noneM-
anagerSpec
Data type Enumeration
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
18 EdchConf (EdchConf)
Parents:
BTSEquipment - BTSCell - EdchConf
Child(ren):
EdchServiceParameterSet -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
commonERGCHPowerOffset
Parameter name commonERGCHPowerOffset
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value -35.0
deltaDownServingCellNoHO
Parameter name deltaDownServingCellNoHO
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [0.000..1.000] step:0.001
Data type Decimal
Initial value 0.020
duplexOffsetForEagchPowerControl
Parameter name duplexOffsetForEagchPowerControl
Domain BTS
Description This parameter defines the offset between UL and
DL path loss applied for path loss estimation for E-
AGCH power control in Node B. (UL path loss is
lower than the DL path loss). This offset depends
on the UMTS operating band.
Class 3
Presence required
Visibility customer
Unit dB
Range [-20.0..0.0] step:0.1
Data type Signed
eDchResourceId
Parameter name eDchResourceId
Domain BTS
Description The BTS uses this parameter, depending on the
value of the parameter RfCarri-
er.hspaHardwareAllocation, to allocate EDCH on E-
BBU of iCEM. When the BTS allocates EDCH on
iCEM (according to parameter hspaHardwareAlloc-
ation), all BTS CELL using the same ed-
chResourceId will be allocated on the same E-BBU
of an iCEM. Default value = Associated local-
CellGroupId. Specific Check: all BTS CELL using
the same edchResourceId shall also have the same
localCellGroupId. Specific Check: all BTS CELL
with the same localCellGroupId shall be configured
with the same edchResourceId.
Class 0
Presence required
Visibility customer
Range [0..5]
Data type Decimal
Initial value N.A.
eagchPathLossValue
Parameter name eagchPathLossValue
Domain BTS
Description This table defines the different DL path loss
thresholds applied for E-AGCH power control in
Node B (see parameter eagchPowerValue).
Class 3
Presence required
Visibility customer
Unit dB
Range [100.0..200.0] step:0.1
Data type Fixed[1..5] List of Decimal
Initial value 135.0,130.0,125.0,120.0,115.0
eagchPower
Parameter name eagchPower
Domain BTS
Description The power level relative to primary CPICH of the
cell, devoted to one e-AGCH channel is indicated
here when the fixed mode is chosen
Class 3
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value -12.5
eagchPowerControlMode
Parameter name eagchPowerControlMode
Domain BTS
Description This parameter indicates how to perform the power
control on the eAGCH channel Note: fixedPower-
Level is the only value allowed in this release
Class 3
Presence required
Visibility customer
Range fixed, dynamic
Data type Enumeration
Initial value fixed
eagchPowerControlModeXcem
Parameter name eagchPowerControlModeXcem
Domain BTS
Class 3
Presence required
Visibility customer
Range fixed, dynamic
Data type Enumeration
Initial value dynamic
eagchPowerOffset
Parameter name eagchPowerOffset
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-45.0..65.0] step:0.1
Data type Signed
Initial value 10.0
eagchPowerValue
Parameter name eagchPowerValue
Domain BTS
Description This table defines the different E-AGCH transmis-
sion power values (relative to CPICH), according to
the DL path loss estimated by the Node B, applied
for E-AGCH power control in Node B.
Class 3
Presence required
Visibility customer
Unit dB
Range [-28.0..28.0] step:0.1
Data type Fixed[1..6] List of Signed
Initial value -12.5,-12.5,-12.5,-12.5,-12.5,-12.5
edchInactivityTimerXcem
Parameter name edchInactivityTimerXcem
Domain BTS
Class 3
Presence required
Visibility customer
Unit ms
Range [0..20000] step:40
Data type Decimal
edchInitialTBIndex10msTTI
Parameter name edchInitialTBIndex10msTTI
Domain BTS
Class 0
Presence required
Visibility customer
Range [0..127]
Data type Decimal
Initial value 7
edchInitialTBIndex2msTTI
Parameter name edchInitialTBIndex2msTTI
Domain BTS
Class 0
Presence required
Visibility customer
Range [0..127]
Data type Decimal
Initial value 8
edchNumCommonRgPerCode
Parameter name edchNumCommonRgPerCode
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..4]
Data type Decimal
Initial value 2
edchSofterHoLimit
Parameter name edchSofterHoLimit
Domain BTS
Class 3
Presence required
Visibility customer
Unit %
Range [0..100]
Data type Decimal
Initial value 100
edchSpiRelativeWeight
Parameter name edchSpiRelativeWeight
Domain BTS
Class 0
Presence required
Visibility customer
Range [0..100]
Data type Fixed[1..16] List of Decimal
Initial value 100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100
ehichErrorProbability
Parameter name ehichErrorProbability
Domain BTS
Class 3
Presence required
Visibility customer
Range [1..255]
Data type Decimal
Initial value 10
ehichPowerControlMode
Parameter name ehichPowerControlMode
Domain BTS
Description This parameter indicates how to perform the power
control on the eHICH channel Possible values: 0 =
fixedPowerLevel- Itl is the only value allowed in this
release
Class 3
Presence required
Visibility customer
Range fixed, dynamic
Data type Enumeration
Initial value fixed
ehichPowerSignature
Parameter name ehichPowerSignature
Domain BTS
Description The power relative to primary CPICH of the cell, de-
voted to one e-HICH signature is indicated here
when the fixed mode is chosen
Class 3
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value -28.6
Recommended value -8.0
ergchPowerControlMode
Parameter name ergchPowerControlMode
Domain BTS
Description This parameter indicates how to perform the power
control on the eRGCH channel Note: fixedPower-
Level is the only value allowed in this release
Class 3
Presence required
Visibility customer
Range fixed, dynamic
Data type Enumeration
Initial value fixed
ergchPowerSignature
Parameter name ergchPowerSignature
Domain BTS
Description The power relative to primary CPICH of the cell, de-
voted to one e-RGCH signature is indicated here
when the fixed mode is chosen.
Class 0
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value -28.6
Recommended value -22.0
harqType
Parameter name harqType
Domain BTS
Description Type of HARQ that can be managed by the BTS.
Possible value: 1 =M IR ( MixIncrementalRedund-
ancy) 2 = PIR (PartialIncrementalRedundancy)
Class 0
Presence required
Visibility customer
Range mirType, pirType
Data type Enumeration
Initial value mirType
maxEdchCommonChannelPower
Parameter name maxEdchCommonChannelPower
Domain BTS
Description Note: this parameter is currently not used. The
maximum power relative to primary CPICH that can
be used by eagch, ehich and ergch channels at
each instant. eagchPower +
Somme(ehichPowerSignature) +
Somme(ergchPowerSignature) =< maxEdchCom-
monChannelPower
Class 3
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value 0
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
maxPowerCorrection
Parameter name maxPowerCorrection
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-12.8..12.7] step:0.1
Data type Signed
Initial value 3.0
minPowerCorrection
Parameter name minPowerCorrection
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-12.8..12.7] step:0.1
Data type Signed
Initial value 3.0
nonServingEHICHPowerOffset
Parameter name nonServingEHICHPowerOffset
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value -35.0
pMaxDlEDCH
Parameter name pMaxDlEDCH
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value 6.0
pMinDlEDCH
Parameter name pMinDlEDCH
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value -18.0
powerOffsetERGCHServingNoSHO
Parameter name powerOffsetERGCHServingNoSHO
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-12.8..12.7] step:0.1
Data type Signed
Initial value 1.5
powerOffsetERGCHServingSHO
Parameter name powerOffsetERGCHServingSHO
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-12.8..12.7] step:0.1
Data type Signed
Initial value 1.5
rotMarginPrediction
Parameter name rotMarginPrediction
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..10]
Data type Decimal
Initial value 3
rotOrthogonalityEstimation
Parameter name rotOrthogonalityEstimation
Domain BTS
Class 3
Presence required
Visibility customer
Range off, on
rotPredictionCorrection
Parameter name rotPredictionCorrection
Domain BTS
Class 3
Presence required
Visibility customer
Range off, on
Data type Enumeration
Initial value on
ttiType
Parameter name ttiType
Domain BTS
Description TTI to be used by the BTS according to the UE cap-
ability. Possible values 10ms and 2ms If 10ms, the
BTS will always use 10 ms even if the UE is able of
2ms TTI If 2ms, the BTS will use the UE capability
Note: Only value 10 will be managed by the BTS in
this releas
Class 3
Presence required
Visibility customer
Unit ms
Range 2ms, 10ms
Data type Enumeration
Initial value 10ms
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
19 EdchServiceParameterSet (EdchServiceParameterSet)
Parents:
BTSEquipment - BTSCell - EdchConf - EdchServiceParameterSet
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 4 4
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..3]
Data Type Decimal
Initial Value
schedulingPriorityLevel
Parameter name schedulingPriorityLevel
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..15]
Data type Decimal
Initial value N.A.
Def value comments Refer to Instances Sheet
Rec val comments
serviceBFactor
Parameter name serviceBFactor
Domain BTS
Class 3
Presence required
Visibility customer
Range [1..30]
Data type Decimal
Initial value N.A.
Def value comments Refer to Instances Sheet
Rec val comments
serviceKFactor
Parameter name serviceKFactor
Domain BTS
Class 3
Presence required
Visibility customer
Range [1..30]
Data type Decimal
Initial value N.A.
Def value comments Refer to Instances Sheet
Rec val comments
serviceMaxRate
Parameter name serviceMaxRate
Domain BTS
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [0..10000]
Data type Decimal
Initial value N.A.
Def value comments Refer to Instances Sheet
Rec val comments
serviceMinRate
Parameter name serviceMinRate
Domain BTS
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [0..10000]
Data type Decimal
Initial value N.A.
Def value comments Refer to Instances Sheet
Rec val comments
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
20 ExtensionCabinet (ExtensionCabinet)
Parents:
BTSEquipment - ExtensionCabinet
Child(ren):
ExternalAlarms - UserAlarms -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
siteName Site
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [1..1]
Data Type Decimal
Initial Value
aliasName
Parameter name aliasName
Domain OAM
Class NA
Presence optional
Visibility customer
Range NA
Data type UnicodeString
Initial value N.A.
fiberRoundTripDelay
Parameter name fiberRoundTripDelay
Domain BTS
Class NA
Presence optional
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
siteName
Parameter name siteName
Domain OAM
Description Name of the associated Site
Class NA
Presence optional
Visibility customer
Range Site
Data type ServiceLink
Initial value N.A.
supervisedExternalAlarmMask
supervisedUserAlarmMask
Parameter name supervisedUserAlarmMask
Domain BTS
Class 3
Presence required
Visibility customer
Range [8..8]
Data type BitString
Initial value 11111111
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
21 ExternalAlarm (ExternalAlarm)
Parents:
BTSEquipment - RemoteRadioHead - ExternalAlarms - ExternalAlarm
BTSEquipment - ExtensionCabinet - ExternalAlarms - ExternalAlarm
BTSEquipment - ExternalAlarms - ExternalAlarm
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
equipment- relative primary none 0 24
Number
Links:
Source attribute Target Object Target Attribute
Parameters:
equipmentNumber
Parameter name equipmentNumber
Domain OAM
Description The equipment number of the external alarm
Class NA
Presence required
Visibility customer
Unit
Range [1..24]
Data Type Decimal
Initial Value
alarmCode
Parameter name alarmCode
Domain OAM
Class NA
Presence optional
Visibility customer
Range [1..5]
Data type Bcd
Initial value N.A.
alarmMessage
Parameter name alarmMessage
Domain OAM
Description The message to be display for this external alarm
Class NA
Presence required
Visibility customer
Range [0..256]
Data type AsciiString
Initial value N.A.
severity
Parameter name severity
Domain OAM
Class NA
Presence optional
Visibility customer
Range minor, warning, major, critical
Data type Enumeration
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
22 ExternalAlarms (ExternalAlarms)
Parents:
BTSEquipment - RemoteRadioHead - ExternalAlarms
BTSEquipment - ExtensionCabinet - ExternalAlarms
BTSEquipment - ExternalAlarms
Child(ren):
ExternalAlarm -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain OAM
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
23 HsXpaResource (HsXpaResource)
Parents:
BTSEquipment - HsXpaResource
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 6
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..5]
Data Type Decimal
Initial Value
capacity
Parameter name capacity
Domain BTS
Description This parameter is not used any longer in UA06 with
the BTS load supporting multimode BBU on xCEM.
Class 0
Presence required
Visibility customer
Unit CE
Range 64, 128
Data type Enumeration
Initial value 128
Rel version comments Release warning: This parameter is not used any
longer in UA06 with the BTS load supporting mul-
timode BBU on xCEM.
edchMaxThroughputXcem
Parameter name edchMaxThroughputXcem
Domain BTS
Description Maximum throughput in Kb/s for EDCH traffic
(MAC-e layer) that can be used by the HSXPA RE-
SOURCE (that is on a xCEM)
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [480..7680] step:480
Data type Decimal
Initial value 7680
hsdpaMaxThroughputXcem
Parameter name hsdpaMaxThroughputXcem
Domain BTS
Description Maximum throughput in Kb/s for HSDPA traffic
(MAC-hs layer) that can be used by the HSXPA
RESOURCE (that is on a xCEM)
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [1800..28800] step:1800
Data type Decimal
Initial value 28800
hsxpaGuaranteeCapacity
Parameter name hsxpaGuaranteeCapacity
Domain BTS
Description This parameter is not used in this release
Class 3
Presence required
Visibility customer
Range [0..128]
Data type Decimal
Initial value 0
Rel version comments Release warning: This parameter is not used in this
release
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
24 HsdpaConf (HsdpaConf)
Parents:
BTSEquipment - BTSCell - HsdpaConf
Child(ren):
HsdpaMaxUeCategoryCapabilityActivation - HsdpaUeCategoryTransportBlockOptimisation -
HsdschServiceParameterSet -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description CounterFamily identifier on NE interface
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
dchPowerMargin
Parameter name dchPowerMargin
Domain BTS
Description Power margin in percentage of DCH power that
cannot be used for HSDPA.
Class 3
Presence required
Visibility customer
Unit %
Range [0..100]
Data type Decimal
Initial value 20
edchEstimatedMaxTotalDlPower
Parameter name edchEstimatedMaxTotalDlPower
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-35.0..15.0] step:0.1
Data type Signed
Initial value -1.5
harqNbMaxRetransmissions
Parameter name harqNbMaxRetransmissions
Domain BTS
Description Maximum number of allowed radio retransmissions
Class 3
Presence required
Visibility customer
Range [0..31]
Data type Decimal
Initial value 7
harqNbMaxRetransmissionsXcem
Parameter name harqNbMaxRetransmissionsXcem
Domain BTS
Class 0
Presence required
Visibility customer
Range [0..31]
Data type Decimal
Initial value 7
harqTargNumTransmissionsXcem
Parameter name harqTargNumTransmissionsXcem
Domain BTS
Class 0
Presence required
Visibility customer
Range [1..20]
Data type Decimal
Initial value 8
harqType
Parameter name harqType
Domain BTS
Description definition "HARQ redundancy version to apply Pos-
sible value = {MIR = 1, PIR = 2, CC = 3} MIR =
MixIncrementalRedundancy PIR = PartialIncre-
mentalRedundancy CC = ChaseCombining
Class 3
Presence required
Visibility customer
Range mirType, pirType, ccType, drType, MIRWith-
PowerAdaptation, PIRWithPowerAdaptation,
CCWithPowerAdaptation, DRWithPowerAdaptation
Data type Enumeration
harqTypeXcem
Parameter name harqTypeXcem
Domain BTS
Class 3
Presence required
Visibility customer
Range irType, ccType
Data type Enumeration
Initial value irType
hsdpaAdjustBlerToChannelVariation
Parameter name hsdpaAdjustBlerToChannelVariation
Domain BTS
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
hsdpaAmpUsage
Parameter name hsdpaAmpUsage
Domain BTS
Class 3
Presence required
Visibility customer
Unit %
Range [0..100]
Data type Decimal
Initial value 100
hsdpaBlerObservationWindow
hsdpaBlerStepSize
Parameter name hsdpaBlerStepSize
Domain BTS
Description This parameter provides the step size for CQI
BLER adjustment algorithm, in case a NACK is re-
ceived. This parameter is used only if parameter hs-
dpaCqiBlerAdjustment is set to outerLoopLikeAlgo.
Class 3
Presence required
Visibility customer
Unit CQI
Range [0.1..1.0] step:0.1
Data type Decimal
Initial value 0.1
hsdpaBlerTargetLowerLimit
Parameter name hsdpaBlerTargetLowerLimit
Domain BTS
Description This parameter indicates the minimum BLER target
acceptable for HS-DSCH, used by CQI BLER ad-
justment algorithm. This parameter is used only if
parameter hsdpaCqiBlerAdjustment is set to outer-
LoopLikeAlgo.
Class 3
Presence required
Visibility customer
Unit %
Range [1..99]
Data type Decimal
Initial value 10
hsdpaBlerTargetLowerLimitXcem
Parameter name hsdpaBlerTargetLowerLimitXcem
Domain BTS
Class 0
Presence required
Visibility customer
Unit %
Range [1..99]
Data type Decimal
Initial value 1
hsdpaBlerTargetMediumLimit
Parameter name hsdpaBlerTargetMediumLimit
Domain BTS
Class 3
Presence required
Visibility customer
Unit %
Range [1..99]
Data type Decimal
Initial value 20
hsdpaBlerTargetUpperLimit
Parameter name hsdpaBlerTargetUpperLimit
Domain BTS
Description This parameter indicates the BLER target for HS-
hsdpaBlerTargetUpperLimitXcem
Parameter name hsdpaBlerTargetUpperLimitXcem
Domain BTS
Class 0
Presence required
Visibility customer
Unit %
Range [1..99]
Data type Decimal
Initial value 20
hsdpaCqiBlerAdjustmentAlgo
Parameter name hsdpaCqiBlerAdjustmentAlgo
Domain BTS
Description This parameter activates the algorithm of CQI ad-
justment based on BLER measurement. Note1: in
UA4.2, the algorithm
Class 3
Presence required
Visibility customer
Range deactivated, blerRangeBasedAlgo, outerLoop-
LikeAlgo, dynamicOuterLoopAlgo
Data type Enumeration
Initial value blerRangeBasedAlgo
hsdpaCqiBlerAdjustmentAlgorithmXcem
Parameter name hsdpaCqiBlerAdjustmentAlgorithmXcem
Domain BTS
Class 3
Presence required
Visibility customer
Range deactivated, constBLERTarget, dynamicHARQTx-
Target
Data type Enumeration
Initial value constBLERTarget
hsdpaFlexibleModulationVsCodeActivation
Parameter name hsdpaFlexibleModulationVsCodeActivation
Domain BTS
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
hsdpaFullPowerUsage
Parameter name hsdpaFullPowerUsage
Domain BTS
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
hsdpaGbrIncreaseFactorForMobility
Parameter name hsdpaGbrIncreaseFactorForMobility
Domain BTS
Class 3
Presence required
Visibility customer
Unit %
Range [0..100]
Data type Decimal
Initial value 0
hsdpaGbrNbNeededTtiForgettingFactor
Parameter name hsdpaGbrNbNeededTtiForgettingFactor
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..11]
Data type Decimal
Initial value 8
hsdpaGbrNbUePerTtiForgettingFactor
Parameter name hsdpaGbrNbUePerTtiForgettingFactor
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..11]
Data type Decimal
Initial value 8
hsdpaGbrTbSizeMonitoringForgettingFactorPerSpi
Parameter name hsdpaGbrTbSizeMonitoringForgettingFactorPerSpi
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..11]
Data type Fixed[1..16] List of Decimal
hsdpaMinAmpUsage
Parameter name hsdpaMinAmpUsage
Domain BTS
Class 3
Presence required
Visibility customer
Unit %
Range [0..100]
Data type Decimal
Initial value 0
hsdpaResourceId
Parameter name hsdpaResourceId
Domain BTS
Description The BTS uses this parameter, depending on the
value of the parameter RfCarri-
er.hspaHardwareAllocation, to allocate HSDPA on
H-BBU of iCEM When the BTS allocates HSDPA
on iCEM (according to parameter hspaHardwareAl-
location), all BTS CELL using the same hsdpaRe-
sourceId will be allocated on the same H-BBU of an
iCEM and use the parameter settings of corres-
ponding hsdpaResource object instance. Note: this
parameter is not used for xCEM Default value = As-
sociated localCellGroupId Specific Check: all BTS
CELL using the same hsdpaResourceId shall also
have the same localCellGroupId.
Class 0
Presence required
Visibility customer
Range [0..5]
Data type Decimal
Initial value N.A.
hsdpaSchedulerAlgorithm
Parameter name hsdpaSchedulerAlgorithm
Domain BTS
Description Algorithm to use for the HSDPA scheduler
Class 3
Presence required
Visibility customer
Range Alcatel-Lucent, proportionalFair, roundRobin, max-
CtoI, fair
Data type Enumeration
Initial value Alcatel-Lucent
hsdpaSchedulerAlgorithmXcem
Parameter name hsdpaSchedulerAlgorithmXcem
Domain BTS
Class 3
Presence required
Visibility customer
Range cRMax, unconstrained, fairThroughput, proportion-
alThroughput, maxCtoI
Data type Enumeration
Initial value proportionalThroughput
hsdpaSchedulerWeightingFactor
Parameter name hsdpaSchedulerWeightingFactor
Domain BTS
Description This parameter is used to compute a weighting
factor for the averaging window used by the cost
function of the scheduler. This parameter is only
used for: "Alcatel-Lucent and "proportionalFair"
schedulerAlgorithm. The weighting factor is:
(2exp(hsdpaSchedulerWeightingFactor) -1) / (2exp(
hsdpaSchedulerWeightingFactor)) Note: when the
parameter is set to 0, the HSDPA scheduler al-
gorithm will behave has a max C/I algorithm (see
hsdpaSchedulerAlgorithm parameter)
Class 3
Presence required
Visibility customer
Range [1..8]
Data type Decimal
Initial value 5
hsdpaSchedulerWeightingFactorXcem
Parameter name hsdpaSchedulerWeightingFactorXcem
Domain BTS
Class 0
Presence required
Visibility customer
Range [1..8]
Data type Decimal
Initial value 8
hsdpaSpiRelativeWeight
Parameter name hsdpaSpiRelativeWeight
Domain BTS
Description This parameter gives a weight to increase or de-
crease the data rate according to the SPI. Note1:
SPI = Scheduler Priority Indicator. SPI goes from 0
to 15. Note2: If all weights are equal to 100, SPI
management is deactivated
Class 3
Presence required
Visibility customer
Range [1..100]
Data type Fixed[1..16] List of Decimal
Initial value 100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100
hsdpaUeCategoryThroughputWeighting
Parameter name hsdpaUeCategoryThroughputWeighting
Domain BTS
Description This parameter states the way UE category are bal-
anced in the scheduler in case of resource limitation
(code or power). The same throughput can be
provided in average to all UE categories as soon as
they report the same CQI, or the throughput can de-
pend on their max capability (depending on the re-
ported CQI). This only applies to "Alcatel-Lucent" or
hsdpaUeCategoryThroughputWeightingXcem
Parameter name hsdpaUeCategoryThroughputWeightingXcem
Domain BTS
Class 0
Presence required
Visibility customer
Range ueCategoryEquity, ueCategoryProportionality
Data type Enumeration
Initial value ueCategoryProportionality
hsdschInterval
Parameter name hsdschInterval
Domain BTS
Description This parameter corresponds to: - The timer validity
for allocated data sent to RNC in Capacity Alloca-
tion message -The minimum time between two Ca-
pacity Allocation send by NodeB
Class 3
Presence required
Visibility customer
Unit ms
Range [10..500] step:10
Data type Decimal
Initial value 50
hsscchPcOffset
Parameter name hsscchPcOffset
Domain BTS
Description Each offset is indexed by CQI (Channel Quality In-
dicator) from CQI=1 to CQI=30 1st elementPower
offset for UE with CQI 1 30th eleme Power offset for
UE with CQI 30 The element for CQI<x> represents
the power offset according to the CPICH to apply to
the HSSCCH channel for UEs reporting a CQI =<x>
Class 3
Presence required
Visibility customer
Unit dB
Range [-28.0..28.0] step:0.1
Data type Fixed[1..30] List of Signed
Initial value 0,0,0,0,0,0,0,0,0,-3,-3,-5,-5,-8,-8,-8,-8,-8,-8,-8,-8,-8,-
8,-8,-8,-8,-8,-8,-8,-8
hsscchSnr
Parameter name hsscchSnr
Domain BTS
Class 3
Presence required
Visibility customer
Unit dB
Range [-5.0..19.0] step:0.1
Data type Signed
Initial value 5.0
maxRateGrowth
Parameter name maxRateGrowth
Domain BTS
Description Overestimation factor for allocated credits MAC-d
PDU.
Class 3
Presence required
Visibility customer
Range [4..16]
Data type Decimal
Initial value 8
txCarrierPowerNotHsxpaComputation
Parameter name txCarrierPowerNotHsxpaComputation
Domain BTS
Class 3
Presence required
Visibility customer
Range edchDlPowerIncluded, edchConfiguredDlPowerRe-
moved
Data type Enumeration
Initial value edchDlPowerIncluded
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description Information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
25 HsdpaMaxUeCategoryCapabilityActivation
(HsdpaMaxUeCategoryCapabilityActivation)
Parents:
BTSEquipment - BTSCell - HsdpaConf - HsdpaMaxUeCategoryCapabilityActivation
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
ueCategory1
Parameter name ueCategory1
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
ueCategory10
Parameter name ueCategory10
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
ueCategory11
Parameter name ueCategory11
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
ueCategory12
Parameter name ueCategory12
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory2
Parameter name ueCategory2
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
ueCategory3
Parameter name ueCategory3
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
ueCategory4
Parameter name ueCategory4
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
ueCategory5
Parameter name ueCategory5
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
ueCategory6
Parameter name ueCategory6
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
ueCategory7
Parameter name ueCategory7
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory8
Parameter name ueCategory8
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory9
Parameter name ueCategory9
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables (as proposed in spec 3GPP TS 25.214) in or-
der to provide the maximum throughput handled by
the UE category
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value false
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
26 HsdpaUeCategoryTransportBlockOptimisation
(HsdpaUeCategoryTransportBlockOptimisation)
Parents:
BTSEquipment - BTSCell - HsdpaConf - HsdpaUeCategoryTransportBlockOptimisation
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
ueCategory1
Parameter name ueCategory1
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory10
Parameter name ueCategory10
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory11
Parameter name ueCategory11
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
ueCategory12
Parameter name ueCategory12
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory2
Parameter name ueCategory2
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory3
Parameter name ueCategory3
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory4
Parameter name ueCategory4
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory5
Parameter name ueCategory5
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory6
Parameter name ueCategory6
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory7
Parameter name ueCategory7
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory8
Parameter name ueCategory8
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
ueCategory9
Parameter name ueCategory9
Domain BTS
Description This parameter allows to enhance the CQI mapping
tables by modifying the transport block sizes ac-
cording to the MAC-d PDU size in order to reduce
the number of padding bits. This should improve the
performances
Class 3
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value true
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
27 HsdschServiceParameterSet (HsdschServiceParameterSet)
Parents:
BTSEquipment - BTSCell - HsdpaConf - HsdschServiceParameterSet
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 16 16
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..15]
Data Type Decimal
Initial Value
serviceBFactor
Parameter name serviceBFactor
Domain BTS
Class 3
Presence required
Visibility customer
Range [1..30]
Data type Decimal
Initial value 7
Def value comments Refer to Instances Sheet
Rec val comments
serviceFilterFactor
Parameter name serviceFilterFactor
Domain BTS
Class 3
Presence required
Visibility customer
Range [1..11]
Data type Decimal
Initial value 8
serviceHighRate
Parameter name serviceHighRate
Domain BTS
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [0..10000]
Data type Decimal
Initial value 1000
serviceKFactor
serviceLowRate
Parameter name serviceLowRate
Domain BTS
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [0..10000]
Data type Decimal
Initial value 0
serviceMaxDelay
Parameter name serviceMaxDelay
Domain BTS
Class 3
Presence required
Visibility customer
Unit ms
Range [0..10000] step:2
Data type Decimal
Initial value 0
Def value comments Refer to Instances Sheet
Rec val comments
serviceMaxRate
Parameter name serviceMaxRate
Domain BTS
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [0..100000]
Data type Decimal
Initial value 300
Def value comments Refer to Instances Sheet
Rec val comments
serviceMinRate
Parameter name serviceMinRate
Domain BTS
Class 3
Presence required
Visibility customer
Unit Kbits/s
Range [0..10000]
Data type Decimal
Initial value 40
Def value comments Refer to Instances Sheet
Rec val comments
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
28 ImaGroup (ImaGroup)
Parents:
BTSEquipment - ImaGroup
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 2
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description ImaGroup identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..1]
Data Type Decimal
Initial Value
imaDefenseDelay
Parameter name imaDefenseDelay
Domain BTS
Description If present, indicates the ImaDefense is activated
and contains the Time laps to wait before consider-
ing that the defense action has to be started.
Class 3
Presence optional
Visibility customer
Unit s
Range [0..300]
Data type Decimal
Initial value N.A.
imaPcmList
Parameter name imaPcmList
Domain BTS
Description list PCM (bit string 0..8) in IMA group
Class 0
Presence required
Visibility customer
Range PCM
Data type Variable[16] List of ServiceLink
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
imaWeightingFactor
Parameter name imaWeightingFactor
Domain BTS
Description Weighting factor used to adapt PCM capacity to
CEM ones
Class 3
Presence required
Visibility customer
Unit %
Range [50..250]
Data type Decimal
Initial value N.A.
signallingReservedBandwidth
Parameter name signallingReservedBandwidth
Domain BTS
Description This parameter is the percentage of the IMA group
bandwidth to be deduced for OAM and signalling
traffic.
Class 3
Presence required
Visibility customer
Unit %
Range [0..100]
Data type Decimal
Initial value 0
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
29 InventoryComponent (InventoryComponent)
Parents:
BTSEquipment - InventoryComponent
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 50
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..4294967295]
Data Type Decimal
Initial Value
cabinetNumber
Parameter name cabinetNumber
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
hardwareRelease
Parameter name hardwareRelease
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..4]
Data type AsciiString
Initial value N.A.
manufacturerInfo
Parameter name manufacturerInfo
Domain BTS
Class NA
Presence optional
Visibility customer
Range [0..64]
Data type AsciiString
Initial value N.A.
manufacturingDate
Parameter name manufacturingDate
Domain BTS
Class NA
Presence optional
Visibility customer
Range [0..4]
Data type AsciiString
Initial value N.A.
moduleApplication
Parameter name moduleApplication
Domain BTS
Class NA
Presence required
Visibility customer
Range gsm, umts, gsm_umts
Data type Enumeration
Initial value N.A.
moduleName
Parameter name moduleName
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
moduleSubType
Parameter name moduleSubType
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..15]
Data type Decimal
Initial value N.A.
moduleType
Parameter name moduleType
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
pecCode
Parameter name pecCode
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..16]
Data type AsciiString
Initial value N.A.
positionInShelf
Parameter name positionInShelf
Domain BTS
Class NA
Presence required
Visibility customer
Range [1..255]
Data type Decimal
Initial value N.A.
serialNumber
Parameter name serialNumber
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..25]
Data type AsciiString
Initial value N.A.
shelfNumber
Parameter name shelfNumber
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..10]
Data type Decimal
Initial value N.A.
30 IpInterface (IpInterface)
Parents:
BTSEquipment - IpInterface
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description IpInterface identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
administrativeState
Parameter name administrativeState
Domain BTS
Description X731 OSI state
Class 3
Presence required
Visibility customer
Range locked, unlocked, shuttingdown
Data type Enumeration
Initial value unlocked
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 OSI state
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
ipInterfaceType
Parameter name ipInterfaceType
Domain BTS
Description Type of physical interface supporting this IP inter-
face.
Class 0
Presence required
Visibility customer
Range interfaceTypeEthernet
Data type Enumeration
Initial value interfaceTypeEthernet
Def value comments This value coresponds to interfaceTypeEthernet
operationalState
Parameter name operationalState
Domain BTS
Description X731 OSI state
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
31 IpRan (IpRan)
Parents:
BTSEquipment - IpRan
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
dhcpUsed
Parameter name dhcpUsed
Domain BTS
Class 0
Presence optional
Visibility customer
Range false, true
Data type Enumeration
Initial value N.A.
ethernetVLANId
Parameter name ethernetVLANId
Domain BTS
Class 0
Presence optional
Visibility customer
Range [1..4094]
Data type Decimal
Initial value N.A.
heartBeatUDPPortNumber
Parameter name heartBeatUDPPortNumber
Domain BTS
Class 0
Presence required
Visibility customer
Range [49152..65535]
Data type Decimal
Initial value 65535
ipAddressNextHopGateway
Parameter name ipAddressNextHopGateway
Domain BTS
Class 0
Presence optional
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
ipRanNodeBAddress
Parameter name ipRanNodeBAddress
Domain BTS
Class 0
Presence optional
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
ipRanSubnetMask
Parameter name ipRanSubnetMask
Domain BTS
Class 0
Presence optional
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
localLanPresence
Parameter name localLanPresence
Domain BTS
Class 0
Presence required
Visibility customer
Range false, true
Data type Enumeration
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
32 LocalCellGroup (LocalCellGroup)
Parents:
BTSEquipment - LocalCellGroup
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 4
Links:
Source attribute Target Object Target Attribute
r99ResourceId R99Resource
rfCarrierId RfCarrier
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description identifier of the local cell group
Class NA
Presence required
Visibility customer
Unit
Range [0..3]
frequencyGroupId
Parameter name frequencyGroupId
Domain BTS
Description This attribute identifies the LocalCellGroup that can
be shared by a PA.
Class 0
Presence required
Visibility customer
Range [0..1]
Data type Decimal
Initial value N.A.
localCellGroupId
Parameter name localCellGroupId
Domain BTS
Description identifier of the local cell group
Class 0
Presence required
Visibility customer
Range [0..3]
Data type Decimal
Initial value N.A.
nonSharedEdchUser
Parameter name nonSharedEdchUser
Domain BTS
Description This parameter is the number of EDCH users that
should be reserved for this Local Cell Group. Spe-
cific check:Sum (all LCG) nonSharedEdchUser <=
edchNumberUserCapacityLicensing
Class 3
Presence required
Visibility customer
Range [0..255]
Data type Decimal
Initial value 0
nonSharedHsdpaUser
Parameter name nonSharedHsdpaUser
Domain BTS
Description This parameter is the number of HSDPA users that
should be reserved for this Local Cell Group. Spe-
cific check:Sum (all LCG) nonSharedHsdpaUser <=
hsdpaNumberUserCapacityLicensing
Class 3
Presence required
Visibility customer
Range [0..255]
Data type Decimal
Initial value 0
nonSharedR99Resource
Parameter name nonSharedR99Resource
Domain BTS
Description This parameter is the number of CE (Channel Ele-
ment) for R99 traffic that should be reserved for this
Local Cell Group. Specific check: Sum (all LCG)
nonSharedR99Resource <=
r99NumberCECapacityLicensing
Class 0
Presence required
Visibility customer
Range [0..65535]
Data type Decimal
Initial value 0
priority
Parameter name priority
Domain BTS
Description Priority of the frequency
Class 0
Presence required
Visibility customer
Range [1..2]
Data type Decimal
Initial value 1
r99ResourceId
Parameter name r99ResourceId
Domain BTS
Class 0
Presence required
Visibility customer
Range R99Resource
Data type ServiceLink
Initial value N.A.
rfCarrierId
Parameter name rfCarrierId
Domain BTS
Class 0
Presence required
Visibility customer
Range RfCarrier
Data type ServiceLink
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
33 NATP (NATP)
Parents:
BTSEquipment - NATP
Child(ren):
NatpTable -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
natpGlobalIpAddress
Parameter name natpGlobalIpAddress
Domain BTS
Class 0
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
natpGlobalNetworkMask
Parameter name natpGlobalNetworkMask
Domain BTS
Class 0
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value 255.255.255.0
natpInternalIpAddress
Parameter name natpInternalIpAddress
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
natpInternalNetworkMask
Parameter name natpInternalNetworkMask
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value 255.255.255.0
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
34 NatpTable (NatpTable)
Parents:
BTSEquipment - NATP - NatpTable
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 256
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..255]
Data Type Decimal
Initial Value
destinationIpAddress
Parameter name destinationIpAddress
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
natpIpInterface
Parameter name natpIpInterface
Domain BTS
Class 3
Presence required
Visibility customer
Range localBTS, rrh11, rrh12, rrh13, rrh14, rrh15, rrh16,
rrh21, rrh22, rrh23, rrh24, rrh25, rrh26, rrh31, rrh32,
rrh33, rrh34, rrh35, rrh36
Data type Enumeration
Initial value localBTS
sourcePortNumber
Parameter name sourcePortNumber
Domain BTS
Class 3
Presence required
Visibility customer
Range [10000..19999]
Data type Decimal
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
35 NodeBCP (NodeBCP)
Parents:
BTSEquipment - NodeBCP
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 1
Links:
Source attribute Target Object Target Attribute
vccId VCC
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description NodeBCP identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 OSI State
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
operationalState
Parameter name operationalState
Domain BTS
Description X731 OSI State
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
vccId
Parameter name vccId
Domain BTS
Description rdn Identifier of the VCC object used for this link.
Class 0
Presence required
Visibility customer
Range VCC
Data type ServiceLink
Initial value N.A.
36 OMCBConnection (OMCBConnection)
Parents:
BTSEquipment - OMCBConnection
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 8
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..7]
Data Type Decimal
Initial Value
omcbIpAddress
Parameter name omcbIpAddress
Domain BTS
Description Each entry of the list represents an OMC-B that can
manage the BTS. It is composed of omcbIpAd-
dress: IP address of the OMC-B This parameter is
used only is DHCP has not been activated on the
BTS (I&C parameter). In case the OMC-B address
stored in I&C is not present in the list, the BTS auto-
matically adds it in its internal list of OMC-B. Note1:
BTS reuses same IP Mask and same BTS In port
(same solution as with DHCP) Note2: for CCM re-
placement management, the BTS would need to
update I&C parameter when connecting to a
"backup" OMC-B. The Backup OMC-B then be-
comes the "current-I&C" OMC-B
Class 3
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
omcbTcpPort
Parameter name omcbTcpPort
Domain BTS
Description omcbTcpPort: TCP port of the OMC-B This para-
meter is used only is DHCP has not been activated
on the BTS (I&C parameter).
Class 3
Presence required
Visibility customer
Range [0..65535]
Data type Decimal
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
37 PCM (PCM)
Parents:
BTSEquipment - PCM
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 16
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description PCM identifier.
Class NA
Presence required
Visibility customer
Unit
Range [1..16]
Data Type Decimal
Initial Value
administrativeState
Parameter name administrativeState
Domain BTS
Description X731 - OSI State If the PCM supporting OAM link is
asked to be locked, the BTS does nothing but re-
porting an alarm to OMC-B as soon as possible (if
this order comes from config file, the alarm wil be
sent at next connection; if this order comes on-line,
BTS will reject it).
Class 3
Presence required
Visibility customer
Range locked, unlocked, shuttingdown
Data type Enumeration
Initial value unlocked
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 - OSI State
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
operationalState
Parameter name operationalState
Domain BTS
Description X731 OSI state
Class NA
Presence required
Visibility customer
Range disabled, enabled
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
38 PaResource (PaResource)
Parents:
BTSEquipment - PaResource
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 12
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..11]
Data Type Decimal
Initial Value
maxPowerAmplification
Parameter name maxPowerAmplification
Domain BTS
Description This is the maximum Power of the resource. Value
fullMode means that the hardware resource can be
used at its full power.
Class 0
Presence required
Visibility customer
Range fullMode, max30W, max45W, max60W, max85W
Data type Enumeration
Initial value fullMode
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
39 PaResourceRRH (PaResourceRRH)
Parents:
BTSEquipment - RemoteRadioHead - PaResourceRRH
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 2
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..1]
Data Type Decimal
Initial Value
maxRrhPowerAmplification
Parameter name maxRrhPowerAmplification
Domain BTS
Description This is the maximum Power of the RRH or
TRDU.Value fullMode means that the hardware re-
source can be use at its full power.
Class 0
Presence required
Visibility customer
Range fullMode, max10W, max20W, max30W, max40W,
max60W
Data type Enumeration
Initial value fullMode
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
40 PassiveComponent (PassiveComponent)
Parents:
BTSEquipment - PassiveComponent
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 17
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description PasiveComponent identifier.
Class NA
Presence required
Visibility customer
Unit
Range [0..4294967295]
Data Type Decimal
Initial Value
administrativeState
Parameter name administrativeState
Domain BTS
Description X731 - OSI state Some passive component cannot
be locked (the BTS do nothing in that case). Only
the PAs an DDMs can be locked.
Class 3
Presence required
Visibility customer
Range locked, unlocked, shuttingdown
Data type Enumeration
Initial value unlocked
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 OSI state
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
cabinetNumber
Parameter name cabinetNumber
Domain BTS
Description Cabinet number where this board is present
Class NA
Presence required
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
hardwareRelease
Parameter name hardwareRelease
Domain BTS
Description Indicates the revision level of the equipment 4 AS-
CII char: ttnn tt = 2 spaces for a regular product 1
space + P for a prototype nn = hardware version
Class NA
Presence required
Visibility customer
Range [0..4]
Data type AsciiString
Initial value N.A.
manufacturerInfo
Parameter name manufacturerInfo
Domain BTS
Description Manufacturer information if available of the module.
Class NA
Presence optional
Visibility customer
Range [0..64]
Data type AsciiString
Initial value N.A.
manufacturingDate
Parameter name manufacturingDate
Domain BTS
Description Note: the parameter is optional for compatibility
reason This parameter is set at Manufacturing date
and is not modified Format wwyy with ww = week
number (2 chars) yy = last 2 digits of year number
(2 chars) Example: Week 03 year 2000 is coded
0300
Class NA
Presence optional
Visibility customer
Range [0..4]
moduleApplication
Parameter name moduleApplication
Domain BTS
Description Module application
Class NA
Presence required
Visibility customer
Range gsm, umts, gsm_umts
Data type Enumeration
Initial value N.A.
moduleName
Parameter name moduleName
Domain BTS
Description Name of the RU in the BAAN database set at man-
ufacturing date
Class NA
Presence required
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
moduleSubType
Parameter name moduleSubType
Domain BTS
Description Module sub type
Class NA
Presence required
Visibility customer
Range [0..15]
Data type Decimal
moduleType
Parameter name moduleType
Domain BTS
Description Module type
Class NA
Presence required
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
operationalState
Parameter name operationalState
Domain BTS
Description X731 - OSI state This attribute is read-only. It rep-
resents the board operability. This attribute has two
values: -
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
pecCode
Parameter name pecCode
Domain BTS
Description Hardware board Product Engineering Code.
__NTxxNNnnnnnnnn __: two spaces reserved for
future use where NN = Module family and
Nnnnnnnn = Edition number
Class NA
Presence required
Visibility customer
Range [0..16]
Data type AsciiString
Initial value N.A.
positionInShelf
Parameter name positionInShelf
Domain BTS
Class NA
Presence required
Visibility customer
Range [1..255]
Data type Decimal
Initial value N.A.
serialNumber
Parameter name serialNumber
Domain BTS
Description Hardware board construction number.
_____________NNTMxxyyyyyy _____________:
13 blank space reserved for future use NNTM: for
Alcatel-Lucent manufacturer ID (4 char) xx = Manu-
facturing location (2 char) yyyyyy = Serial number
(6 char)
Class NA
Presence required
Visibility customer
Range [0..25]
Data type AsciiString
Initial value N.A.
shelfNumber
Parameter name shelfNumber
Domain BTS
Class NA
Presence required
Visibility customer
Range [0..10]
Data type Decimal
Initial value N.A.
41 PowerSystem (PowerSystem)
Parents:
BTSEquipment - PowerSystem
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 2
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description PowerSystem identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..1]
Data Type Decimal
Initial Value
42 Qaal2Params (Qaal2Params)
Parents:
BTSEquipment - Qaal2Params
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
originatingA2ea
Parameter name originatingA2ea
Domain BTS
Description This parameter is the BTS A2EA (AAL Type 2 Ser-
vice Endpoint Address). The format of this A2EA is
the NSAP address format (NSAP: Network Service
Access Point) Default value: <All bytes set to 0>
Note: this parameter is not used by the BTS in UA0
Class 3
Presence required
Visibility customer
Range [40..40]
Data type HexString
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
resetRetries
Parameter name resetRetries
Domain BTS
Description Number of reset retries before reset procedure is
terminated in case of peer not responding. Note:
this parameter is not used by the BTS in UA05
Class 3
Presence optional
Visibility customer
Range [1..10]
Data type Decimal
Initial value 3
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
timerBlo
Parameter name timerBlo
Domain BTS
timerRel
Parameter name timerRel
Domain BTS
Description This attribute specifies value of the timerRel defined
in Q.2630.1 (timer between the qaal2:REL and
qaal2:RLC) Note: this parameter is not used by the
BTS in UA05
Class 3
Presence required
Visibility customer
Unit s
Range [2..60]
Data type Decimal
Initial value 2
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
timerRes
Parameter name timerRes
Domain BTS
Description This attribute specifies value of the timerRes
defined in Q.2630.1. (timer between qaal2:RES and
qaal2:RSC) Note: this parameter is not used by the
BTS in UA05
Class 3
Presence required
Visibility customer
Unit s
Range [2..60]
Data type Decimal
Initial value 10
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
timerUbl
Parameter name timerUbl
Domain BTS
Description This attribute specifies value of the timerUbl defined
in Q.2630.1. (timer between qaal2:UBL and qaal2:
UBC) Note: this parameter is not used by the BTS
in UA05
Class 3
Presence required
Visibility customer
Unit s
Range [2..60]
Data type Decimal
Initial value 5
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
43 R99Resource (R99Resource)
Parents:
BTSEquipment - R99Resource
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 2
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..1]
Data Type Decimal
Initial Value
minimumR99ResourceRequired
Parameter name minimumR99ResourceRequired
Domain BTS
Class 0
Presence required
Visibility customer
Range [32..768] step:32
Data type Decimal
Initial value 64
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
44 RadiusParameters (RadiusParameters)
Parents:
BTSEquipment - RadiusParameters
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
mainRadiusServerIpAddress
Parameter name mainRadiusServerIpAddress
Domain BTS
Class 3
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
mainRadiusServerSharedSecretKey
Parameter name mainRadiusServerSharedSecretKey
Domain BTS
Class 3
Presence required
Visibility customer
Range [1..288]
Data type AsciiString
Initial value N.A.
nasIdentifier
Parameter name nasIdentifier
Domain BTS
Class 3
Presence optional
Visibility customer
Range [0..128]
Data type AsciiString
Initial value N.A.
secondaryRadiusServerIpAddress
Parameter name secondaryRadiusServerIpAddress
Domain BTS
Class 3
Presence optional
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
secondaryRadiusServerSharedSecretKey
Parameter name secondaryRadiusServerSharedSecretKey
Domain BTS
Class 3
Presence optional
Visibility customer
Range [1..288]
Data type AsciiString
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
45 RemoteRadioHead (RemoteRadioHead)
Parents:
BTSEquipment - RemoteRadioHead
Child(ren):
ExternalAlarms - PaResourceRRH -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 12
Links:
Source attribute Target Object Target Attribute
siteName Site
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description Possible values - (11) 1st RRH on Optical Output 1
- (12) 2nd RRH on Optical Output 1 - (13) 3rd RRH
on Optical Output 1 - (21) 1st RRH on Optical Out-
put 2 - (22) 2nd RRH on Optical Output 2 - (23) 3rd
RRH on Optical Output 2 - (31) 1st RRH on Optical
Output 3 - (32) 2nd RRH on Optical Output 3 - (33)
3rd RRH on Optical Output 3 - (41) 1st RRH on Op-
tical Output 4 - (51) 1st RRH on Optical Output 5 -
(61) 1st RRH on Optical Output 6
Class NA
Presence required
Visibility customer
Unit
Range 11, 12, 13, 14, 15, 16, 21, 22, 23, 24, 25, 26, 31,
32, 33, 34, 35, 36, 41, 51, 61
Data Type Enumeration
Initial Value
aliasName
Parameter name aliasName
Domain OAM
Class NA
Presence optional
Visibility customer
Range NA
Data type UnicodeString
Initial value N.A.
antennaConnectionId
Parameter name antennaConnectionId
Domain BTS
Description This parameter associates this REMOTE RADIO
HEAD with an ANTENNA ACCESS object with:
RRH::antennaConnectionId == ANTENNA AC-
CESS::antennaConnection When the parameter is
not present, the BTS uses the instance of object
REMOTE RADIO HEAD as antennaConnectionId
When 2 RRH have the same antennaConnectionId,
the BTS will consider that (installation rule)
CellGroup with frequencyGroupId = 1 Example:
RRH <11>::antennaConnectionId=11 refers to: Sec-
tor 11 Main RRH <21>::antennaConnectionId=11
refers to: Sector 11 Diversity RRH
<31>::antennaConnectionId=21 refers to: Sector 21
Main RRH <41>::antennaConnectionId=21 refers
to: Sector 21 Diversity RRH
<51>::antennaConnectionId=11 refers to: Sector 31
Main RRH <61>::antennaConnectionId=11 refers
to: Sector 31 Diversity
Class 0
Presence optional
Visibility customer
Range antennaConnection_1, antennaConnection_2, an-
tennaConnection_3, antennaConnection_4, anten-
naConnection_5, antennaConnection_6, anten-
naConnection_11, antennaConnection_12, anten-
naConnection_13, antennaConnection_14, anten-
naConnection_15, antennaConnection_16, anten-
naConnection_21, antennaConnection_22, anten-
naConnection_23, antennaConnection_24, anten-
naConnection_25, antennaConnection_26, anten-
naConnection_31, antennaConnection_32, anten-
naConnection_33, antennaConnection_34, anten-
naConnection_35, antennaConnection_36, anten-
naConnection_41, antennaConnection_51, anten-
naConnection_61, antennaConnection_101, anten-
naConnection_102, antennaConnection_103, an-
tennaConnection_1011, antennaConnection_1021,
antennaConnection_1031, antennaConnec-
tion_1041, antennaConnection_1051, antennaCon-
nection_1061
Data type Enumeration
Initial value N.A.
fiberRoundTripDelay
Parameter name fiberRoundTripDelay
Domain BTS
Class NA
Presence optional
Visibility customer
Range [0..2147483647]
Data type Decimal
Initial value N.A.
opticLoss
Parameter name opticLoss
Domain OAM
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
repeaterCellList
Parameter name repeaterCellList
Domain BTS
Description When an RRH is in repeater mode, this parameter
indicates the list of BTS CELL that the RRH shall
repeat.This parameter is used only when
RRH::rrhMode is set to repeaterMode Note: this
parameter is not used for TRDU
Class 0
Presence optional
Visibility customer
Range BTSCell
Data type Variable[4] List of ServiceLink
Initial value N.A.
rrhGroupId
Parameter name rrhGroupId
Domain BTS
Description This parameter is used to in the solution where an
RRH 4FA would be modelized by 2 REMOTE RA-
DIO HEAD object. In this solution, the 2 REMOTE
RADIO HEAD objects with the same rrhGroupId
would represent the same physical RRH 4FA RRH.
Note: this parameter is not used for TRDU
Class 0
Presence optional
Visibility customer
Range [0..5]
Data type Decimal
Initial value N.A.
rrhMode
Parameter name rrhMode
Domain BTS
Description This parameter indicates how the RRH is
used.Possible values are:0: sectorMode1: repeater-
rrhNumberFrequency
Parameter name rrhNumberFrequency
Domain BTS
Description Number of frequencies that are software-allowed on
this RRH or TRDU. Possible values 0: means no
software locking of Number Frequency for this RRH
or TRDU, 1: means that RRH or TRDU can only
manage 1 frequency, 2: means that RRH or TRDU
can manage 2 frequencies, 3: means that this RRH
or TRDU can manage 3 frequencies Note: 0 and 2
have the same effect. It is to anticipate potential fu-
ture RRH that could manage more that 2 frequen-
cies If Capacity.rrhCarrierCapacityLicensing is not
unlimited, then this parameter becomes useless.
Class 0
Presence required
Visibility customer
Range [0..3]
Data type Decimal
Initial value 1
rxAttenuation
Parameter name rxAttenuation
Domain BTS
Description In case of RRH repeater mode, the capacity and
coverage of RRH and NodeB is limited according to
this parameter.This parameter limits the contribu-
tion of the repeated RRH when summing its contri-
bution (RX sample) to the Cell. Note: This paramet-
er is only used when RRH is in repeater mode. This
parameter is not used for TRDU
Class 3
Presence required
Visibility customer
Unit dB
Range [0.0..10.0] step:0.1
Data type Decimal
Initial value 6.0
siteName
Parameter name siteName
Domain OAM
Description Name of the associated Site
Class NA
Presence optional
Visibility customer
Range Site
Data type ServiceLink
Initial value N.A.
supervisedRRHExternalAlarmMask
Parameter name supervisedRRHExternalAlarmMask
Domain BTS
Description Mask (bit map) of the operator external alarms that
have to be supervised The least significant bit (lsb)
represents wing this alarm to be reported. This
parameter is only used for RRH modules (not used
for TRDU)
Class 3
Presence required
Visibility customer
Range [16..16]
Data type BitString
Initial value 0000000000000000
txAttenuation
Parameter name txAttenuation
Domain BTS
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description Information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
46 RfCarrier (RfCarrier)
Parents:
BTSEquipment - RfCarrier
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 4
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..3]
Data Type Decimal
Initial Value
dlFrequencyNumber
Parameter name dlFrequencyNumber
Domain BTS
Class 0
Presence required
Visibility customer
Range [0..16383]
Data type Decimal
Initial value N.A.
frequencyBand
Parameter name frequencyBand
Domain BTS
Class 0
Presence required
Visibility customer
Range umtsBand, umts1900Band, umts1800Band,
umts2100-1700Band, umts850Band, umts800Band,
umts2600Band, umts900Band, umts1700Band
Data type Enumeration
Initial value N.A.
hspaHardwareAllocation
Parameter name hspaHardwareAllocation
Domain BTS
Class 3
Presence required
Visibility customer
Range icemOnly, xcemOnly, xcemPreference, icemPrefer-
ence
Data type Enumeration
Initial value N.A.
ulFrequencyNumber
Parameter name ulFrequencyNumber
Domain BTS
Class 0
Presence required
Visibility customer
Range [0..16383]
Data type Decimal
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
47 RouteCes (RouteCes)
Parents:
BTSEquipment - RouteCes
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 16
Links:
Source attribute Target Object Target Attribute
pcmId PCM
vccId VCC
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description RouteCes identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..15]
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description X731 OSI State
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
operationalState
Parameter name operationalState
Domain BTS
Description X731 OSI State
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
partialFill
Parameter name partialFill
Domain BTS
Description If partial fill is used, this parameter gives the num-
ber of user octet per AAL1 cell. Setting this para-
pcmId
Parameter name pcmId
Domain BTS
Description Represents the Identifier of the outgoing PCM to
reach a remote BTS.
Class 0
Presence required
Visibility customer
Range PCM
Data type ServiceLink
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
pcmTimeSlotMask
Parameter name pcmTimeSlotMask
Domain BTS
Description Represents a bit mask where each bit stands for a
PCM TimeSlot number. A bit is set to 1 if the cor-
responding TS is part of the CES Route, is set to 0
rxCellDelayVariationTolerance
Parameter name rxCellDelayVariationTolerance
Domain BTS
Description Cell Delay variation Tolerance for the VCCid
Class 0
Presence required
Visibility customer
Unit micro-s
Range [100..31000] step:100
Data type Decimal
Initial value 2000
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
vccId
Parameter name vccId
Domain BTS
Description rdn Identifier of the VCC object used for this link.
Class 0
Presence required
Visibility customer
Range VCC
Data type ServiceLink
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
48 RtObsSession (RtObsSession)
Parents:
BTSEquipment - RtObsSession
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description RtObsSession identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
familyState
Parameter name familyState
Domain BTS
Description familyState[I] indicates whether the family of coun-
ters whose id is equal to I, is requested by OMC
(value = true) or not (value = false) . When the ob-
ject is created familyState[I] must be false for every
I. For every index I not matching a defined Counter-
Family, familyState[I] must be set to false (i.e. indic-
ating the activation of a non-existing family is inval-
id).
Class 3
Presence required
Visibility customer
Range CounterFamily
Data type Variable[16] List of ServiceLink
Initial value N.A.
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
granularityPeriod
Parameter name granularityPeriod
Domain BTS
Description This defines the period in minutes with which re-
quested families of counter (as indicated by famil-
iesState) must be returned to OMC. This parameter
can be changed only when no family is currently re-
quested (i.e. familyState[I] = false for every I as re-
corded in BTS MIB)
Class 3
Presence required
Visibility customer
Unit min
Range [1..5]
Data type Decimal
Initial value 5
Rel version comments Release Version Warning: parameter not used by
the system in this release version. It must not be set
if optional, or set to its default value if mandatory.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
49 SaalUniParams (SaalUniParams)
Parents:
BTSEquipment - SaalUniParams
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 1 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
timerCC
Parameter name timerCC
Domain BTS
Description Timer as defined in ITU Q2110 In the connection
control phase, during establishment and release of
a connection and during resynchronization or recov-
ery, transmission of PDUs is protected by the
TimerCC. It determines the time between transmis-
sion of BGN (Begin PDU), END (End PDU), ER
(Error Recovery), or RS (Resynchronization) PDU
as long as an acknowledgement to these PDUs has
not been received.
Class 3
Presence required
Visibility customer
Unit s
Range [1..5]
Data type Decimal
Initial value 2
timerIdle
Parameter name timerIdle
Domain BTS
Description Timer as defined in ITU Q2110 In idle phase, when
upon receipt of a STAT (Solicited status) PDU,
timerIdle is started. At the expiry of timerIdle, the
transient phase is entered again.
Class 3
Presence required
Visibility customer
Unit s
Range [1..60]
Data type Decimal
Initial value 2
timerKeepAlive
Parameter name timerKeepAlive
Domain BTS
timerNoResponse
Parameter name timerNoResponse
Domain BTS
Description Timer as defined in ITU Q2110 In active phase, in
order to detect a broken connection, a TimerNoRe-
sponse is running parallel to timerPoll. TimerNoRe-
sponse indicates the maximum time interval during
which at least one STAT PDU needs to be re-
ceived. Failing this, the SSCOP connection is abor-
ted.
Class 3
Presence required
Visibility customer
Unit s
Range [2..60]
Data type Decimal
Initial value 30
timerPoll
Parameter name timerPoll
Domain BTS
Description Timer as defined in ITU Q2110 In active phase, a
timerPoll is running to assure that the peer receiver
is polled often enough (via POLL PDUs) to return its
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
50 SiteLan (SiteLan)
Parents:
BTSEquipment - SiteLan
Child(ren):
DeviceTable -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description SiteLan identifier
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
subNetworkAddress
Parameter name subNetworkAddress
Domain BTS
Description Definition of the subNetwork connected beyond the
BTS (IP address notation)
Class 3
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
subNetworkMaskOfSiteLan
Parameter name subNetworkMaskOfSiteLan
Domain BTS
Description Definition of the sub network mask connected bey-
ond the BTS (IP address notation) IETF RFC 922 &
1878 The network mask strips the network ID from
the IP address, leaving only the host ID. The net-
work mask is what performs all the local magic of
dividing an IP network into subnetworks. The net-
work mask for an un-sub-networked IP network
number is simply a dotted quad which has all the
'network bits' of the network number set to '1' and
all the host bits set to '0'. So, for the three classes
of IP networks, the standard network masks are:- rk
number into two subnetworks, we would borrow one
host bit by setting the appropriate bit in the network
mask of the first (normal) host bit to '1'. For a C
Class address, this would result in a netmask of
11111111.11111111.11111111.10000000 or
255.255.255.128 For C Class network number of
192.168.1.0, these are some of the sub-networking
options you have:
_________________________________________
_____________________________ No of No of
subnets Hosts/net netmask 2 126 255.255.255.128
(11111111.11111111.11111111.10000000) 4 62
255.255.255.192
(11111111.11111111.11111111.11000000) 8 30
255.255.255.224
(11111111.11111111.11111111.11100000) 16 14
255.255.255.240
(11111111.11111111.11111111.11110000) 32 6
255.255.255.248
(11111111.11111111.11111111.11111000) 64 2
255.255.255.252
(11111111.11111111.11111111.11111100)
_________________________________________
_____________________________ The address
of an interface (such as an Ethernet card or PPP in-
terface on a host, router, print server etc) can have
any value in the host bits except all zero or all 1
Class 3
Presence required
Visibility customer
Range [0..255].[0..255].[0..255].[0..255]
Data type Ip4Address
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
51 UserAlarm (UserAlarm)
Parents:
BTSEquipment - UserAlarms - UserAlarm
BTSEquipment - ExtensionCabinet - UserAlarms - UserAlarm
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
equipment- relative primary none 0 3
Number
Links:
Source attribute Target Object Target Attribute
Parameters:
equipmentNumber
Parameter name equipmentNumber
Domain OAM
Description The equipment number of the external alarm
Class NA
Presence required
Visibility customer
Unit
Range [1..3]
alarmCode
Parameter name alarmCode
Domain OAM
Class NA
Presence optional
Visibility manufacturer
Range [1..5]
Data type Bcd
Initial value N.A.
alarmMessage
Parameter name alarmMessage
Domain OAM
Description The message to be display for this external alarm
Class NA
Presence required
Visibility customer
Range [0..256]
Data type AsciiString
Initial value N.A.
severity
Parameter name severity
Domain OAM
Class NA
Presence optional
Visibility customer
Range minor, warning, major, critical
Data type Enumeration
Initial value N.A.
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
52 UserAlarms (UserAlarms)
Parents:
BTSEquipment - UserAlarms
BTSEquipment - ExtensionCabinet - UserAlarms
Child(ren):
UserAlarm -
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 1
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain OAM
Description
Class NA
Presence required
Visibility customer
Unit
Range [0..0]
Data Type Decimal
Initial Value
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Class NA
Presence optional
Visibility customer
Range NA
Data type AsciiString
Initial value N.A.
53 VCC (VCC)
Parents:
BTSEquipment - VCC
Child(ren):
-
Identifiers:
Name IDcategory IDqualifier IDscope MinIn- MaxIn-
stances stances
rdnId relative primary none 0 56
Links:
Source attribute Target Object Target Attribute
Parameters:
rdnId
Parameter name rdnId
Domain BTS
Description VCC Identifier, referenced as VccId in all others ob-
jects
Class NA
Presence required
Visibility customer
Unit
Range [0..55]
Data Type Decimal
Initial Value
administrativeState
Parameter name administrativeState
Domain BTS
Description X731 - OSI state This attribute is read-write. It rep-
resents board administration, which operates inde-
pendently of the operability and usage of managed
objects. This attribute has three values: s function
Class 0
Presence required
Visibility manufacturer
Range locked, unlocked, shuttingdown
Data type Enumeration
Initial value unlocked
availabilityStatus
Parameter name availabilityStatus
Domain BTS
Description OSI - X731
Class NA
Presence required
Visibility customer
Range inTest, failed, powerOff, offLine, offDuty, depend-
ency, degraded, notInstalled, logFull
Data type Variable[9] List of Enumeration
Initial value N.A.
cdvTolerancePCR
Parameter name cdvTolerancePCR
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is used the
tolerance associated to the PCR (Peak Cell Rate).
Not supported in current release
Class 0
Presence required
Visibility customer
Unit micro-s
Range [0..2147483647]
Data type Decimal
Initial value 0
Rec val comments The smaller the priority of the VC, the higher the
CDVTolerancePCR. Therefore, here is the CDVTol-
erancePCR recommended: For atmProfile P0: CD-
VTolerancePCR = TBD For atmProfile P1: CDVTol-
erancePCR = TBD For atmProfile P2: CDVToleran-
cePCR = TBD
cdvToleranceSCR
Parameter name cdvToleranceSCR
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub VCC. It is the toler-
ance associated to the SCR (Sustainable Cell
Rate). Not supported in current release Current
BTS hardware don't support such a feature, the de-
fault value is then force to 0.
Class 0
Presence required
Visibility customer
Unit micro-s
Range [0..2147483647]
Data type Decimal
Initial value 0
Rec val comments The smaller the priority of the VC, the higher the
CDVToleranceSCR. Therefore, here is the CDVTol-
eranceSCR recommended: For atmProfile P0: CD-
VToleranceSCR = CDVTolerancePCR = TBD For
atmProfile P1: CDVToleranceSCR = CDVToleran-
cePCR = TBD For atmProfile P2: CDVToler-
anceSCR = CDVTolerancePCR = TBD
externalPortId
Parameter name externalPortId
Domain BTS
Description Represents
Class 0
Presence required
Visibility customer
Range [0..32]
Data type Decimal
Initial value N.A.
holdingPriority
Parameter name holdingPriority
Domain BTS
Description The holdingPriority is used only for VCC of an IMA
group when the parameter imaDefenseDelay is
present (IMA defense is activated). This parameter
indicates the priority order by which this external
ATM VCC is: - setup at startup - discarded at t
vated, the BTS will discard 2 AAL2 VCC with lowest
holdingPriority Note2: in case of online modification
of this parameter, the modification it will be taken in-
to account only on next PCM failure/recovery.
Class 3
Presence required
Visibility customer
Range [0..16]
Data type Decimal
Initial value N.A.
Def value comments 0 for AAL5 VCC 0 for HSDPA AAL2 VCC 0 for CES
AAL1 VCC 1, 2, 3, 4, 5, 6, 7, 8 for DS AAL2 VCC (1
for 1st DS AAL2 VCC; 2 for 2nd DS AAL2 VCC ...)
1, 2, 3, 4, 5, 6, 7 for NDS AAL2 VCC
interfaceType
Parameter name interfaceType
Domain BTS
Description Type of physical bearer. PCM is the only supported
in V2 IMA is supported in V3
Class 0
Presence required
Visibility customer
Range interfaceTypePcm, interfaceTypeIma
maxBurstSize
Parameter name maxBurstSize
Domain BTS
Description Forum: af-tm-0056.000 April 1996 "Traffic Manage-
ment Specification It is included in Traffic Descriptor
parameters for Iub VCC. It is the maximum number
of cells that can be sent at PCR (Peak Cell Rate).
Class 3
Presence required
Visibility customer
Unit number of cells
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Rec val comments The maxBurstSize is used only for rtVBR and
nrtVBR Service category. Therefore, here is the
maxBurstSize recommended: For atmProfile P0:
maxBurstSize = NA For atmProfile P1: maxBurst-
Size = TBD For atmProfile P2: maxBurstSize = TBD
operationalState
Parameter name operationalState
Domain BTS
Description X731 - OSI State
Class NA
Presence required
Visibility customer
Range disabled, enabled
Data type Enumeration
Initial value enabled
peakCellRate
Parameter name peakCellRate
Domain BTS
serviceCategory
Parameter name serviceCategory
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It defines the ATM Ser-
vice Category of the ATM Profile considered.
Class 0
Presence required
Visibility customer
Range CBR, VBRrt, VBRnrt, UBR, UBRPlus, VBRnrt0,
VBRnrt2, VBRnrt3, UBR0, UBR1, UBR3,
UBRPlus0, UBRPlus1, UBRPlus3
Data type Enumeration
Initial value N.A.
sustainableCellRate
Parameter name sustainableCellRate
Domain BTS
Description ATM Forum: af-tm-0056.000 April 1996 "Traffic
Management Specification" It is included in Traffic
Descriptor parameters for Iub interface. It is the rate
that a burst ON-OFF traffic source can send. The
worst case is a source sending Max Burst Size cells
at a Peak Cell Rate.
Class 3
Presence required
Visibility customer
Unit cells/sec
Range [0..2147483647]
Data type Decimal
Initial value N.A.
Rec val comments The SCR depends on the atmProfile considered:
For atmProfile P0: SCR = TBD For atmProfile P1:
SCR= TBD For atmProfile P2: SCR= TBD
userSpecificInfo
Parameter name userSpecificInfo
Domain OAM
Description information field reserved to the user. No specific
treatment on this field is performed by the system.
Class NA
Presence optional
Visibility customer
Range [0..30]
Data type AsciiString
Initial value N.A.
vc
Parameter name vc
Domain BTS
Description VC identifier
Class 0
Presence required
Visibility customer
Range [32..255]
Data type Decimal
Initial value N.A.
vp
Parameter name vp
Domain BTS
Description vp Identifier
Class 0
Presence required
Visibility customer
Range [0..7]
Data type Decimal
Initial value N.A.
– hsxpaResourceId
– localCellGroupId
– maximumPowerAmplification
– paRatio
– paResourceId
– pmmActivation
– rssiHighAlarmThreshold
– rssiUnbalancedMainDivThreshold
– rtwpMargin
– rtwpMaxCellLoadCacActivation
– rtwpMaxCellLoadNonEdch
– rtwpReference
– rtwpTimeDetection
– transportFiberDelay
– userSpecificInfo
—
BTSHsdpaResource
– hsdpaMaxThroughputHbbu
– userSpecificInfo
—
CCP
– ccpId
– userSpecificInfo
– vccId
—
Capacity
– edchNumberUserCapacityLicensing
– edchThroughputCapacityLicensing
– hsdpaNumberUserCapacityLicensing
– hsdpaThroughputCapacityLicensing
– paPowerCapacityLicensing
– r99NumberCECapacityLicensing
– rrhCarrierCapacityLicensing
– rrhPowerCapacityLicensing
– userSpecificInfo
– xtrmCarrierCapacityLicensing
—
CounterFamily
– userSpecificInfo
—
DeviceTable
– deviceIpAddress
– deviceType
– dnsServer
– managerAddress
– managerFqdn
– managerSpec
– userSpecificInfo
—
EdchConf
– commonERGCHPowerOffset
– deltaDownServingCellNoHO
– duplexOffsetForEagchPowerControl
– eDchResourceId
– eagchPathLossValue
– eagchPower
– eagchPowerControlMode
– eagchPowerControlModeXcem
– eagchPowerOffset
– eagchPowerValue
– edchInactivityTimerXcem
– edchInitialTBIndex10msTTI
– edchInitialTBIndex2msTTI
– edchNumCommonRgPerCode
– edchSofterHoLimit
– edchSpiRelativeWeight
– ehichErrorProbability
– ehichPowerControlMode
– ehichPowerSignature
– ergchPowerControlMode
– ergchPowerSignature
– harqType
– maxEdchCommonChannelPower
– maxPowerCorrection
– minPowerCorrection
– nonServingEHICHPowerOffset
– pMaxDlEDCH
– pMinDlEDCH
– powerOffsetERGCHServingNoSHO
– powerOffsetERGCHServingSHO
– rotMarginPrediction
– rotOrthogonalityEstimation
– rotPredictionCorrection
– ttiType
– userSpecificInfo
—
EdchServiceParameterSet
– schedulingPriorityLevel
– serviceBFactor
– serviceKFactor
– serviceMaxRate
– serviceMinRate
– userSpecificInfo
—
ExtensionCabinet
– aliasName
– siteName
– supervisedExternalAlarmMask
– supervisedUserAlarmMask
– userSpecificInfo
—
ExternalAlarm
– alarmCode
– alarmMessage
– severity
– userSpecificInfo
—
ExternalAlarms
– userSpecificInfo
—
HsXpaResource
– capacity
– edchMaxThroughputXcem
– hsdpaMaxThroughputXcem
– hsxpaGuaranteeCapacity
– userSpecificInfo
—
HsdpaConf
– dchPowerMargin
– edchEstimatedMaxTotalDlPower
– harqNbMaxRetransmissions
– harqNbMaxRetransmissionsXcem
– harqTargNumTransmissionsXcem
– harqType
– harqTypeXcem
– hsdpaAdjustBlerToChannelVariation
– hsdpaAmpUsage
– hsdpaBlerObservationWindow
– hsdpaBlerStepSize
– hsdpaBlerTargetLowerLimit
– hsdpaBlerTargetLowerLimitXcem
– hsdpaBlerTargetMediumLimit
– hsdpaBlerTargetUpperLimit
– hsdpaBlerTargetUpperLimitXcem
– hsdpaCqiBlerAdjustmentAlgo
– hsdpaCqiBlerAdjustmentAlgorithmXcem
– hsdpaFlexibleModulationVsCodeActivation
– hsdpaFullPowerUsage
– hsdpaGbrIncreaseFactorForMobility
– hsdpaGbrNbNeededTtiForgettingFactor
– hsdpaGbrNbUePerTtiForgettingFactor
– hsdpaGbrTbSizeMonitoringForgettingFactorPerSpi
– hsdpaMinAmpUsage
– hsdpaResourceId
– hsdpaSchedulerAlgorithm
– hsdpaSchedulerAlgorithmXcem
– hsdpaSchedulerWeightingFactor
– hsdpaSchedulerWeightingFactorXcem
– hsdpaSpiRelativeWeight
– hsdpaUeCategoryThroughputWeighting
– hsdpaUeCategoryThroughputWeightingXcem
– hsdschInterval
– hsscchPcOffset
– hsscchSnr
– maxRateGrowth
– txCarrierPowerNotHsxpaComputation
– userSpecificInfo
—
HsdpaMaxUeCategoryCapabilityActivation
– ueCategory1
– ueCategory10
– ueCategory11
– ueCategory12
– ueCategory2
– ueCategory3
– ueCategory4
– ueCategory5
– ueCategory6
– ueCategory7
– ueCategory8
– ueCategory9
– userSpecificInfo
—
HsdpaUeCategoryTransportBlockOptimisation
– ueCategory1
– ueCategory10
– ueCategory11
– ueCategory12
– ueCategory2
– ueCategory3
– ueCategory4
– ueCategory5
– ueCategory6
– ueCategory7
– ueCategory8
– ueCategory9
– userSpecificInfo
—
HsdschServiceParameterSet
– serviceBFactor
– serviceFilterFactor
– serviceHighRate
– serviceKFactor
– serviceLowRate
– serviceMaxDelay
– serviceMaxRate
– serviceMinRate
– userSpecificInfo
—
ImaGroup
– imaDefenseDelay
– imaPcmList
– imaWeightingFactor
– signallingReservedBandwidth
– userSpecificInfo
—
IpInterface
– ipInterfaceType
– userSpecificInfo
—
IpRan
– dhcpUsed
– ethernetVLANId
– heartBeatUDPPortNumber
– ipAddressNextHopGateway
– ipRanNodeBAddress
– ipRanSubnetMask
– localLanPresence
– userSpecificInfo
—
LocalCellGroup
– frequencyGroupId
– localCellGroupId
– nonSharedEdchUser
– nonSharedHsdpaUser
– nonSharedR99Resource
– priority
– r99ResourceId
– rfCarrierId
– userSpecificInfo
—
NATP
– natpGlobalIpAddress
– natpGlobalNetworkMask
– natpInternalIpAddress
– natpInternalNetworkMask
– userSpecificInfo
—
NatpTable
– destinationIpAddress
– natpIpInterface
– sourcePortNumber
– userSpecificInfo
—
NodeBCP
– userSpecificInfo
– vccId
—
OMCBConnection
– omcbIpAddress
– omcbTcpPort
– userSpecificInfo
—
PCM
– userSpecificInfo
—
PaResource
– maxPowerAmplification
– userSpecificInfo
—
PaResourceRRH
– maxRrhPowerAmplification
– userSpecificInfo
—
Qaal2Params
– originatingA2ea
– resetRetries
– timerBlo
– timerRel
– timerRes
– timerUbl
– userSpecificInfo
—
R99Resource
– minimumR99ResourceRequired
– userSpecificInfo
—
RadiusParameters
– mainRadiusServerIpAddress
– mainRadiusServerSharedSecretKey
– nasIdentifier
– secondaryRadiusServerIpAddress
– secondaryRadiusServerSharedSecretKey
– userSpecificInfo
—
RemoteRadioHead
– aliasName
– antennaConnectionId
– opticLoss
– repeaterCellList
– rrhGroupId
– rrhMode
– rrhNumberFrequency
– rxAttenuation
– siteName
– supervisedRRHExternalAlarmMask
– txAttenuation
– userSpecificInfo
—
RfCarrier
– dlFrequencyNumber
– frequencyBand
– hspaHardwareAllocation
– ulFrequencyNumber
– userSpecificInfo
—
RouteCes
– partialFill
– pcmId
– pcmTimeSlotMask
– rxCellDelayVariationTolerance
– userSpecificInfo
– vccId
—
RtObsSession
– familyState
– granularityPeriod
– userSpecificInfo
—
SaalUniParams
– timerCC
– timerIdle
– timerKeepAlive
– timerNoResponse
– timerPoll
– userSpecificInfo
—
SiteLan
– subNetworkAddress
– subNetworkMaskOfSiteLan
– userSpecificInfo
—
UserAlarm
– alarmMessage
– severity
– userSpecificInfo
—
UserAlarms
– userSpecificInfo
—
VCC
– cdvTolerancePCR
– cdvToleranceSCR
– externalPortId
– holdingPriority
– interfaceType
– maxBurstSize
– peakCellRate
– serviceCategory
– sustainableCellRate
– userSpecificInfo
– vc
– vp
•
Inventory
—
Board
– manufacturerInfo
– manufacturingDate
—
InventoryComponent
– manufacturerInfo
– manufacturingDate
—
PassiveComponent
– manufacturerInfo
– manufacturingDate
•
States and Status
—
AAL2Bearer
– availabilityStatus
– localBlockingState
– operationalState
– remoteBlockingState
—
AlcapBearer
– availabilityStatus
– operationalState
—
AntennaAccess
– availabilityStatus
– operationalState
—
BTSEquipmentMIB
– mibState
—
Board
– administrativeState
– availabilityStatus
– operationalState
– standbyStatus
—
CCP
– availabilityStatus
– operationalState
—
IpInterface
– administrativeState
– availabilityStatus
– operationalState
—
NodeBCP
– availabilityStatus
– operationalState
—
PCM
– administrativeState
– availabilityStatus
– operationalState
—
PassiveComponent
– administrativeState
– availabilityStatus
– operationalState
—
RouteCes
– availabilityStatus
– operationalState
—
VCC
– availabilityStatus
– operationalState
•
Dynamic Data
—
BTSCell
– equipmentMapping
—
Capacity
– getLicensingcapability
—
ExtensionCabinet
– fiberRoundTripDelay
—
RemoteRadioHead
– fiberRoundTripDelay
•
Installation and Commisioning
•
Installation and Commisioning
—
BTSEquipment
– alphaParameter
– betaParameter
– cpriManagement
– dhcpServerPresence
– e1PcmFrame
– gammaParameter
– gpsSyncSourceNumber
– imaFrameLength
– imaUsed
– imaVersion
– ipAddressBts
– ipAddressOmcB
– maskOfPcmTsUsed
– maskOfPcmUsed
– maxDifferentialDelay
– minNbOfActiveLinksInGroup
– omcBPort
– pcmChannel16Mode
– pcmE1Adaptation
– pcmE1CrcThreshold
– pcmLbo
– pcmProtectionModule
– pcmReceiveSensitivity
– pcmT1Adaptation
– pcmT1CrcThreshold
– pcmType
– receiveCrc
– rxCdvTPcrVcOmcB
– rxCdvTScrVcOmcB
– rxMbsVcOmcB
– rxPcrVcOmcB
– rxScrVcOmcB
– serviceCategoryVcOmcB
– subNetworkMask
– syncDelay
– syncFallbackOnPcm
– syncMode
– t1PcmCoding
– t1PcmFrame
– testPatternProcedure
– txCdvTPcrVcOmcB
– txCdvTScrVcOmcB
– txMbsVcOmcB
– txPcrVcOmcB
– txScrVcOmcB
– vcOmcB
– vpOmcB
UNCONTROLLED COPY: The master of this document is stored on an electronic database and is "write protected"; it may be altered
only by authorized persons. While copies may be printed, it is not recommended. Viewing of the master electronically ensures access
to the current issue. Any hardcopies taken must be regarded as uncontrolled copies.
ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of Alcatel-Lucent. Except as
expressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained herein confidential, shall disclose the
information only to its employees with a need to know, and shall protect the information from disclosure and dissemination to third
parties. Except as expressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the information contained
herein. If you have received this document in error, please notify the sender and destroy it immediately.
Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marks of Alcatel-Lucent, Alcatel
and Lucent Technologies.