Professional Documents
Culture Documents
HP Printers Cold Reset and Config Sequences PDF
HP Printers Cold Reset and Config Sequences PDF
Black-and-white
LaserJet 4, 5m
Cold reset
Turn printer off.
Hold down both Go and Online buttons.
(for LJ5, hold only Go button)
Turn printer on.
Release buttons when display shows COLD RESET.
Self-test/configuration (please wait at least five minutes after cold reset!)
Press Menu button until TEST MENU is displayed
Press Item button until PRINT SELF TEST is displayed
Press Go button
LaserJet 1200
Network Report
Press TEST button on external print server
LaserJet 1300
Cold reset
Turn printer off
Hold down Go button
Turn printer on
Continue to hold the Go button for at least 5 seconds, but no more than 15
Release the Go button
If at first you don’t succeed, try again, holding for a wee bit more or less time
Configuration page (print server) (please wait at least five minutes after cold reset!)
On the back side of the printer where the network cable plugs in, press the
little button above the cable.
LaserJet 1320
Cold reset
Turn printer off
Hold down reset button on the back of the printer
Turn printer on
Keep the reset button down until the printer shows Ready (steady green),
then release
Configuration page (please wait at least five minutes after cold reset!)
When printer is Ready and not printing, press and hold Go button for 5
seconds.
LaserJet 1505
Cold reset
Turn printer off
Hold Go button
Turn printer on
After all lights turn on, hold Go button for a count of 6
The Attention light will turn off during this time
Release Go button
If at first you don’t succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
Press the Go button when the printer is idle.
Network configuration (please wait at least five minutes after cold reset!)
Press Setup button
Use arrow keys to highlight Reports, then press OK
Use arrow keys to highlight Network Report, then press OK
LaserJet P2015
Cold reset
Turn printer off
Hold down Go/green button
Turn printer on
Continue to hold the Go/green button down for at least 5 seconds, no more than
15 seconds. When the Attention light goes on, you can let go.
If at first you don’t succeed, try again, holding for a wee bit more or less time
Alternate network reset
Turn printer off
Hold down Go/green and Cancel/red buttons simultaneously
Turn printer on
Continue to hold buttons down for at least 10 seconds, but no more than 20
seconds. When the Attention/triangle light goes on, let go.
If at first you don’t succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press Go/green button for 5
seconds
If at first you don’t succeed, try again, holding for a wee bit more or less time
LaserJet 2100
Cold reset
Turn printer off
Hold Job Cancel button
Turn printer on
When all LEDS light, release button
If at first you don’t succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press and release Go and Job
Cancel buttons simultaneously
LaserJet 2200
Cold reset
Turn printer off
Hold Go button
Turn printer on
When ATTENTION light turns on, release button
Configuration page (please wait at least five minutes after cold reset!)
When printer is READY and not printing, press and release Go and Job
Cancel buttons simultaneously
LaserJet P2055
Cold reset
Press OK
Use the arrow keys until SERVICE appears in the display
Press OK
Use the arrow keys until RESTORE DEFAULTS appears in the display
Press OK
Network page (please wait at least five minutes after cold reset!)
Press OK
Use the arrow keys until REPORTS appears in the display
Press OK
Use the arrow keys until NETWORK REPORTS appears in the display
Press OK
Color
Color LaserJet 1500, 2500 series
Cold reset
Turn printer off
Hold Go button
Turn printer on
After all lights turn on, hold Go button for a count of 6
The Attention light will turn off during this time
Release Go button
If at first you don’t succeed, try again, holding for a wee bit more or less time
Configuration page (please wait at least five minutes after cold reset!)
When printer is ready and not printing, press Go and Job Cancel buttons
simultaneously.
Color LaserJet 1600
Cold reset
Turn printer off
Turn printer on
When display shows rapidly changing numbers, hold Checkmark button
When all lights turn on, release button
When SELECT LANGUAGE appears, use the arrow keys to highlight COLD
RESET
Press Checkmark button
Configuration page (please wait at least five minutes after cold reset!)
Press arrow buttons until display shows REPORTS
Press Checkmark button
Press arrow button until display shows CONFIG REPORT
Press Checkmark button
OfficeJet
OfficeJet 6500 series
Network page (please wait at least five minutes after completing reset)
Press Setup button
Press arrow buttons until PRINT REPORT is highlighted
Press OK button
Press arrow buttons until NETWORK SETTINGS is highlighted
Press OK button
PhotoSmart
PhotoSmart 32xx series
Viewing network settings
Press Setup button
Press down arrow until NETWORK highlighted
Press OK
Press 1
Press 2
Printing network settings
Press Setup button
Press down arrow until NETWORK highlighted
Press OK
Press 1
Press 1