Professional Documents
Culture Documents
MSDS of ETERSET 2844 PDF
MSDS of ETERSET 2844 PDF
ETERSET 2844
2844
ETERNAL
MATERIALS CO., LTD. 2015/11/20
1
Chemical property:
Substance Identity CAS No. Approx. Weight (%)
polymer 65
styrene 100-42-5 35
Remark:
2
weld, braze, solder, drill, grind, or expose these containers to heat, flame, sparks, static
electricity, or other sources of ignition as the container may explode and may cause injury or
death. Empty drums should be completely drained and properly bunged . Empty drums should be
promptly returned to a drum reconditioner or properly disposed . Ground and bond containers
when transferring the material to prevent static electricity sparks which could ignite the vapor .
Use spark-proof tools and explosion-proof equipment. Consult your supplier of promoters and
catalysts for additional instructions on proper mixing and usage .
Storage procedures:Keep away from ignition sources: flames, pilot lights, electrical sparks, and sparking tools. NO
SMOKING. Do not store in direct sunlight. Store separate from oxidizing materials , peroxides,
and metal salts. Keep container closed when not in use. To ensure maximum stability and
maintain optimum resin properties, resins should be stored in closed containers at temperatures
below 75°F (25°C). Copper or copper containing alloys should be avoided as containers .
3
Partition coefficient of n-octanol/water: Evaporation rate:
4
requirements.
4. Canadian WHMIS: This material is classified by the Canadian Workplace Hazardous Material
Information System as: B2 (flammable liquid) D2A (materials causing other toxic effects , very
toxic material) D2B (materials causing other toxic effects , toxic material) F (dangerously
reactive material)
Telephone:
Title:Chemist Name Yenku Chen
(signature):
Date:2015/11/20
Remark:“ – “ = not available ; “ / “ = not applicable
While ETERNAL MATERIALS CO., LTD. Believed that data contained herein are accurate and
derived from qualified sources the data are not be taken as a warranty or representation for solely
for your consideration, investigation and verification. Any use of these data and information must
be determined by the user to be in accordance with applicable federal, state and local and
regulations.