Professional Documents
Culture Documents
5000-5020 en PDF
5000-5020 en PDF
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
RoHS
2/22
-40°... +85°C IP
Safety-LockTM High rotational Temperature High protection High shaft load Shock / vibration Magnetic field Short-circuit Reverse polarity Optical sensor
speed range level capacity resistant proof proof protection
Technology in detail
Robust Safety-Lock™ bearing structure Cables with fitted connector Undetachable clamping ring Tangential cable outlet
Slotted clamping ring + slotted shaft
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
Order code 8.5000 . X X X X . XXXX We offer for all encoders configured with the underlined preferential
options our free of charge 24one delivery promise.
Shaft version Type a b c d e
Orders placed on working days before 9AM CET are manufactured and
ready for dispatch the same day. The 24one delivery promise is limited to
20 pieces per delivery.
Incremental
8 = clamping flange, IP65 ø 58 mm [2.28“] B = radial cable, special length PVC *)
encoders
A = synchro flange, IP66/IP67 ø 58 mm [2.28“] 1)
B = synchro flange, IP65 ø 58 mm [2.28“] 1) Type of connection – connector
C = square flange, IP66/IP67 63.5 mm [2.5“] P = axial M12 connector, 5-pin 5)
D = square flange, IP65 63.5 mm [2.5“] R = radial M12 connector, 5-pin 5)
G = Euro flange, IP66/IP67 ø 115 mm [4.53“] 2) 3 = axial M12 connector, 8-pin
4 = radial M12 connector, 8-pin
1 = servo flange, IP66/IP67 ø 50.8 mm [2“] 3) 7 = axial M23 connector, 12-pin
2 = servo flange, IP65 ø 50.8 mm [2“] 3) 8 = radial M23 connector, 12-pin
3 = square flange, IP66/IP67 52.3 mm [2.06“] 3) Y = radial MIL connector, 10-pin
4 = square flange, IP65 52.3 mm [2.06“] 3) W = radial MIL connector, 7-pin 5)
E = servo flange, IP66/IP67 ø 63.5 mm [2.5“] 3)
F = servo flange, IP65 ø 63.5 mm [2.5“] 3) 9 = radial MIL connector, 6-pin 3) 5)
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
Order code 8.5020 . X X X X . XXXX We offer for all encoders configured with the underlined preferential
options our free of charge 24one delivery promise.
Hollow shaft Type a b c d e
Orders placed on working days before 9AM CET are manufactured and
ready for dispatch the same day. The 24one delivery promise is limited to
20 pieces per delivery.
1) US version.
2) Attention: no CE types!
3) Without inverted signal.
4) For the cable connection type, cable material PUR.
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
Incremental
8 0,31
4 m8 0,16
(flange type 1 + 2)
encoders
5 0,2
SW7 [0,28]
M4 0,16
R7
0 ,2
30 1,18 8
Isolation / adapter inserts for hollow shaft encoders order code 8.5020.X8XX.XXXX D1 Isolation insert
Thermal
and electrical isolation of the encoders 6 mm [0.24“] 8.0010.4021.0000
(Temperature range -40 ... +115°C [-40°F ... +239°F] )
8 mm [0.32“] 8.0010.4020.0000
Isolation inserts prevent currents from passing through the
encoder bearings. These currents can occur when using 10 mm [0.39“] 8.0010.4023.0000
inverter
controlled three-phase or AC vector motors and 12 mm [0.47“] 8.0010.4025.0000
considerably shorten the service life of the encoder bearings.
In
addition the encoder is thermally isolated as the plastic 1/4“ 8.0010.4022.0000
does not transfer the heat to the encoder. 3/8“ 8.0010.4024.0000
1/2“ 8.0010.4026.0000
Connector, self-assembly (straight) M12 female connector with coupling nut, 8-pin 05.CMB 8181-0
M23 female connector with coupling nut, 12-pin 8.0000.5012.0000
MIL female connector with coupling nut, 10-pin 8.0000.5062.0000
Further accessories can be found in the accessories section or in the accessories area of our website at: www.kuebler.com/accessories.
Additional connectors can be found in the connection technology section or in the connection technology area of our website at: www.kuebler.com/connection_technology.
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
Technical data
Mechanical characteristics
IP65 12000 min-1
Maximum speed Weight approx. 0.4 kg [14.11 oz]
6000 min-1 (continuous) Protection acc. to EN 60529
IP66/IP67 6000 min-1
without shaft seal IP65
3000 min-1 (continuous) with shaft seal IP66/IP67
Mass moment of inertia Working temperature range -40°C 1) ... +85°C [-40°F 1) ... +185°F]
shaft version approx. 1.8 x 10-6 kgm2
Material shaft stainless steel
hollow shaft version approx. 6 x 10-6 kgm2
Shock resistance acc. to EN 60068-2-27 3000 m/s2, 6 ms 2)
Starting torque IP65 < 0.01 Nm
at 20°C [68°F] IP66/IP67 < 0.05 Nm Vibration resistance acc. to EN 60068-2-6 300 m/s2, 10 ... 2000 Hz 3)
Shaft load capacity radial 100 N
axial 50 N
Electrical characteristics
Output circuit RS422 RS422 Push-pull Push-pull Push-pull Open collector
(TTL compatible) (TTL compatible) (7272 compatible) (7272 compatible, (7273)
without capacitor)
Order code 1 4 5, 7 2 8 3
1) With connector: -40°C [-40°F], cable fixed: -30°C [-22°F], cable moved: -20°C [-4°F].
2) For MIL connectors: 2500 m/ s2
3) For MIL connectors: 100 m/ s2
4) Max. recommended cable length 30 m [98.43‘].
5) If power supply correctly applied.
6) Only one channel allowed to be shorted-out:
at +V= 5 V DC, short-circuit to channel, 0 V, or +V is permitted.
at +V= 5 ... 30 V DC, short-circuit to channel or 0 V is permitted.
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
Terminal assignment
Output circuit Type of connection Cable (isolate unused cores individually before initial start-up)
5000: 1, 2, A, B Signal: 0 V +V 0 Vsens +Vsens A B 0 H
1, 2, 3, 4, 5, 8
5020: 1, A, E, F Core color: WH BN GY PK RD BU GN YE GY PK BU RD shield
Incremental
encoders
Output circuit Type of connection M12 connector, 8-pin
5000: 3, 4, L Signal: 0 V +V A B 0 H
1, 2, 3, 4, 5, 8
5020: 2, H 2), L Pin: 1 2 3 4 5 6 7 8 PH 1)
1 9 8
2 2 2
3 7
3 10 12
3 5 1 4 8 1
5 7 11 6
4 6 4
5
J J J E E E E E EC C C
F FF C CC
D DC D C C D D D (6) (7) (8) (9)
E EDE D D
MIL connector, 10-pin MIL connector, 7-pin MIL connector, 6-pin Sub-D connector, 9-pin
Standard
optical 1 2 Sendix 5000
3 / 5020 (shaft
4 / hollow shaft)
5 Push-pull
6 / RS422 7/ Open collector
8
3 0,12
90,4 3,56
3x
12
30 h7[1,18]
71,4 2,81
71,4 2,81
0°
57,4 2,26
47 1,85
50,8 2
C C
D
3 0,12
1
3,3 0,13 40 1,57 53,2 2,09
D L D
43,7 1,72
47 1,85
64 2,52
MIL-connector version
D Passung L
E 6[0,24] h7 10[0,39] E
D Fit L 8[0,32] h7 15[0,59]
1 M3, 6 [0,24] tief
6 [0.24] h7 10 [0.39] 10[0,39] f7 20[0,79]
8 [0.32] h7 15 [0.59] 12[0,47] h7 20[0,79]
1/4" h7 5/8"
10 [0.39] f7 20 [0.79] 3/8" h7 5/8"
This document is property of Fritz Kübler GmbH, use
of this document without written permission is General Scale: Material:
Werkstoff:
prohibited. tolerances Maßstab:
12 [0.47] h7 20 [0.79] 1/4" h8 7/8"
Das Urheberrecht an dieser Zeichnung verbleibt uns.
Sie darf ohne unsere vorherige Zustimmung weder Allgemeintol. Type:
1:1 7 Typ: 7 5000
1 1 1 2 2 2 3 3 3 4 4 4 5vervielfältigt
5 noch Dritten
5 zugänglich gemacht6oder 6 6 7 8 8 8
= Check item
Prüfmaß DIN ISO
1/4“F h7 5/8“
auf andere Weise mißbraucht werden. Zuwieder- Size: Title:/Benennung:
3/8" h8 7/8" handlungen verpflichten zu Schadenersatz. 2768-m-H Format: A3
8.5000.5XX3/Y
Surface:
Oberfläche:
-0,2
8.5000.6XX4/Y
Drawn by
Bearb. 10.09.04 hl
Ausführung
Ausführung
Ausführung
mit MIL-Stecker
mit MIL-Stecker
mit MIL-Stecker
1 3 x M3,B 6 [0.24]
B deep
B 13,313,3
0,520,52
13,3 0,52 B B B
1 1 1
50 1,97
50 1,97
50 1,97
C C C C C C
94 3,7
94 3,7
94 3,7
58 2,28
2,28
58 D2,28
f8[1,42]
36 f8[1,42]
36 f8[1,42]
75 2,95
75 2,95
75 2,95
48 1,89
48 1,89
48 1,89
D
D
3658
L L L
3x
3x
3x
12
12
12
0°
0°
0°
D D D D D D
10 0,39
10 0,39 21 0,83
10 0,39 21 0,83
21 0,83 10 0,39
10 0,39
10 0,39
37 1,46
37 1,46
37 1,46 46,546,5 46,5 1,83
1,831,83
MIL-connector version
E E E D D Passung
DPassung
Passung
L L L E E E
D Fit L 6[0,24]6[0,24] 6[0,24]
h7 h7 10[0,39]
h7 10[0,39]10[0,39]
1 M3,
1 6M3,
[0,24]
1 6 M3,
[0,24]
tief6 [0,24]
tief tief
6 [0.24] h7 10 [0.39]
8[0,32]
8[0,32] 8[0,32]
h7 h7 15[0,59]
h7 15[0,59]15[0,59]
10[0,39]
10[0,39]10[0,39]
f7 f7 20[0,79]
f7 20[0,79]20[0,79]
8 [0.32] h7 15 [0.59]
12[0,47]
12[0,47]12[0,47]
h7 h7 20[0,79]
h7 20[0,79]20[0,79] This document
This document
is property
This isdocument
property
of Fritz Kübler
of
is property
Fritz
GmbHKübler ofGmbH
Fritz Kübler GmbH Approv. by:Approv. by:Date:
Approv.Date:
by:
Material: Material:
Date: Material:
Standard 1 2 3 4 5 6 7 8
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
Dimensions
A shaft version Ausführung mit MIL-Stecker A
Dimensions in mm [inch]
Incremental
max.50 1,97
1
encoders
94 3,7
C C
50 h7 [1,97]
75 2,95
58 2,28
42 1,65
D
3x
12
0°
D max.21 0,83 D
3 0,12 56,5 2,22
3 0,12
4 0,16
47 1,85
MIL-connector version
E E
D Passung L
6[0,24] h7 10[0,39] 1 3xM4, 6 [0,24] tief
D Fit L
8[0,32] h7 15[0,59]
6 [0.24] h7 10 [0.39] 10[0,39] f7 20[0,79]
8 [0.32] h7 15 [0.59] 12[0,47] h7 20[0,79] This document is property of Fritz Kübler GmbH, use
of this document without written permission is General Scale: Material:
Werkstoff:
1/4" h7 5/8" prohibited. tolerances Maßstab:
10 [0.39] f7 20 [0.79] = Check item
Das Urheberrecht an dieser Zeichnung verbleibt uns.
Sie darf ohne unsere vorherige Zustimmung weder Allgemeintol.
DIN ISO 1:1
Type:
Typ: 5000
3/8" h7 5/8" Prüfmaß vervielfältigt noch Dritten zugänglich gemacht oder
12 [0.47] h7 20 [0.79]
auf andere Weise mißbraucht werden. Zuwieder- Size: Title:/Benennung:
handlungen verpflichten zu Schadenersatz. 2768-m-H Format: A3
F 1/4" h8 7/8"
8.5000.AXX2/Y
Surface:
Oberfläche:
-0,2
7 8.5000.BXX1/Y 8
3 2810 20.06.16 los Drawn by
12.10.05 hl
1 2 3 4 5 6al
Bearb.
1/4“ h8 7/8“
Blatt
0 16.07.09 da Zähl- und Sensortechnik
1 2 3 4 Rev. St.
Rev. No./Änd. Nr. Date Name 78054 VS-Schwenningen Z1130 1 / 1
3/8“ h8 7/8“
Revision
B B
22
0,
5
5,
max.50 1,97
96,75 3,81
31,75 h7 [1,25]
77,75 3,06
52,4 2,06
C C
63,5 2,5
50,8 2
MIL-connector version
D Fit L
6 [0.24]E E
D Passung L
h7 10 [0.39] 6[0,24] h7 10[0,39]
8 [0.32] h7 15 [0.59] 8[0,32] h7 15[0,59]
F
8.5000.CXX1/Y
Surface:
3/8" h8 7/8" Oberfläche:
1/4“ h8 7/8“
-0,2
+0,2 Date Name
8.5000.DXX2/Y
Drawn by
12.10.05 hl
3/8“ h8 7/8“
Bearb.
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
1 2 3 4 5 6 7 8
Dimensions shaft version
Dimensions in mm [inch]
Euro
A flange, ø 115 [4.53] A
Flange type G 61,6 2,43
B B
31 1,22
11 k6 [0,43]
4 0,16
33 1,3
85 h5 [3,35]
C 58 2,28 C
50,8 2
6,6 0,26
7 0,28
16 0,63 6x
54,6 2,15
60
D D
°
3 0,12
E E
1
This document is property of Fritz Kübler GmbH, use
of this document without written permission is General Scale: Material:
1 2 3 4 5 prohibited.
6 tolerances 7 Maßstab: Werkstoff: 8
Das Urheberrecht an dieser Zeichnung verbleibt uns.
Allgemeintol. Type:
= Check item
Prüfmaß
Sie darf ohne unsere vorherige Zustimmung weder
vervielfältigt noch Dritten zugänglich gemacht oder DIN ISO 1:1 Typ: 5000
auf andere Weise mißbraucht werden. Zuwieder-
handlungen verpflichten zu Schadenersatz. Ausführung
2768-m-H mit MIL-Stecker
Size:
Format: A3 Title:/Benennung:
F
Servo flange, øKeine Tabelle
50.8 [2] 1 215342Set beigelegt
8.5000.GBX7.XXXX
Surface:
Oberfläche:
-0,2
+0,2 Date Name
Flange type 1 and 2 35,2
12.7.10 1,39 da
Incremental Encoder
Drawn by
A Bearb.
A
2 2480 28.5.13 al Approv. by
Gepr.
Ra 1,6
1 2436 10.1.13 ih Fritz Kübler GmbH Drawingnumber:/Zeichnungsnummer: Sheet/
1 4-40 UNC x 6 [0.24] deep 13,25 0,52 0 12.7.10 da Zähl- und Sensortechnik
Blatt
1 2 3 4 Rev. St.
Revision Rev. No./Änd. Nr. Date Name 78054 VS-Schwenningen Z1469 1 / 1
1
71,4 2,81
90,4 3,56
46 1,81
B B
3x1
31,75 h7 [1,25]
2
2 0°
47 1,85
50,8 2
50,8 2
4x90°
L
45°
C C
D Fit L
6 [0.24] h7 10 [0.39] D Passung L
8 [0.32]
E
h7 15 [0.59]6[0,24] h7 10[0,39]
E
8[0,32] h7 15[0,59]
10 [0.39] f7 20 [0.79]10[0,39] f7 20[0,79]
1 4-40 UNC x 0,24" deep
12 [0.47] h7 20 [0.79]12[0,47] h7 20[0,79]
2 6-32 UNC x 0,21"deep
1/4“ h7 5/8“ 1/4" h7 5/8"
3/8" h7 5/8"
3/8“ h7 5/8“ 1/4" h8 7/8"
This document is property of Fritz Kübler GmbH, use
of this document without written permission is General
tolerances
Scale: Material:
Werkstoff:
prohibited.
Maßstab:
1/4“ h8 7/8“ 3/8"
Das Urheberrecht an dieser Zeichnung verbleibt uns.
Allgemeintol. Type:
h8 7/8" = Check item
Prüfmaß
Sie darf ohne unsere vorherige Zustimmung weder
vervielfältigt noch Dritten zugänglich gemacht oder DIN ISO 1:1 Typ: 5000
auf andere Weise mißbraucht werden. Zuwieder- Size: Title:/Benennung:
2768-m-H A3
3/8“ F h8 7/8“ handlungen verpflichten zu Schadenersatz. Format:
8.5000.1XX3/4/Y
Surface:
Oberfläche:
-0,2
+0,2 Date Name
8.5000.2XX3/4/Y
Drawn by
Bearb. 20.06.13 al
Approv. by
Gepr.
Ra 1,6
1 2810 20.06.16 los Fritz Kübler GmbH Drawingnumber:/Zeichnungsnummer: Sheet/
Blatt
0 2480 01.08.13 al
80
Zähl- und Sensortechnik
www.kuebler.com
1 2 3 4 Rev. St.
Revision Rev. No./Änd. Nr. Date
© Fritz
Name
Kübler78054
GmbH, subject toZ1541
VS-Schwenningen errors and changes. 07/2018 1 / 1
Incremental encoders
Standard
optical 1 2
Sendix35000 / 5020 (shaft
4
/ hollow shaft)
5
Push-pull
6
/ RS4227 / Open collector
8
Incremental
encoders
max.50 1,97
1
91,15 3,59
31,75 h7 [1,25]
C 2 C
44,45 1,75
72,15 2,84
52,3 2,06
D
1/4“ h8 7/8“
Ra 1,6
1 2810 20.06.16 los Fritz Kübler GmbH Drawingnumber:/Zeichnungsnummer: Sheet/
Blatt
0 2480 01.08.13 al Zähl- und Sensortechnik
B B
46 1,81
31,75 h7 [1,25]
77,75 3,06
96,75 3,81
47,63 1,88
58,87 2,32
1
63,5 2,5
C C
L
3x
12
0°
7,5 0,3 7,5 0,3
DE Fit LD Passung L E
6[0,24] h7 10[0,39]
6 [0.24] h7 10 [0.39]
8[0,32] h7 15[0,59] 1 6-32 UNC
8 [0.32] h7 15 [0.59]
10[0,39] f7 20[0,79]
10 [0.39] f7 20 [0.79]
12[0,47] h7 20[0,79]
1/4" h7 5/8" This document is property of Fritz Kübler GmbH, use
General Scale: Material:
12 [0.47] h7 20 [0.79]
3/8" h7 5/8"
of this document without written permission is
prohibited.
Das Urheberrecht an dieser Zeichnung verbleibt uns.
tolerances
Allgemeintol.
Maßstab:
Werkstoff:
Type:
Sie darf ohne unsere vorherige Zustimmung weder
1:1 5000
1/4“ h7 5/8“
= Check item
vervielfältigt noch Dritten zugänglich gemacht oder DIN ISO Typ:
Prüfmaß
1/4" h8 7/8" auf andere Weise mißbraucht werden. Zuwieder-
handlungen verpflichten zu Schadenersatz. 2768-m-H Size:
Format: A3 Title:/Benennung:
F
3/8“ h7 5/8“ 8.5000.EXX3/4/Y
Surface:
3/8" h8 7/8" -0,2
Oberfläche:
+0,2 Date Name
3/8“ h8 7/8“
Ra 1,6
1 2810 20.06.16 los Fritz Kübler GmbH Drawingnumber:/Zeichnungsnummer: Sheet/
Blatt
0 2480 01.08.13 al Zähl- und Sensortechnik
1 2 3 4 Rev. St.
Revision Rev. No./Änd. Nr. Date Name 78054 VS-Schwenningen Z1542 1 / 1
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
14 0,55
3x
32 1,26
46 1,81
90,4 3,56
71,4 2,81
33 1,3
31,75 1,25
50,8 2
C C
max.
2,4 0,09
3
34,2 1,35 D
1 2 43,7 1,72
37,5 1,48
42 1,65 54,2 2,13
D 44,7 1,76 D
1/2" H7
All rights reserved in the event of the grant of a patent, utility model or design.
A3 1:1 5020
1/2“ H7 H7 General
Title:
F 5/8" 8.5020.23X2/7
tolerances
DIN ISO
5/8“ H7
2768-m-H
1 2 3 = Check item
Prüfmaß 4 4
2810 los 5
28.06.16 6
Incremental Encoder 7
-0,2
+0,2
3 2480 al 17.06.13 Drawing number:
2 da 22.07.09
8[0,32] H7
B 10[0,39] H7
12[0,47] H7
D
14[0,55] H7
15[0,59] H7
1/4" H7 40 1,57
3/8" H7
75 2,95
1/2" H7
5/8" H7 86 3,39
C
D Fit
6 [0.24] H7
34,2 1,35
44,7 1,76
4,9 0,19
8 [0.32] H7
49,6 1,95
10 [0.39] H7 D
12 [0.47] H7
14 [0.55] H7 für
15 [0.59] H7 8.KIH50 30 1,18
1/4“ H7 D Passung 50,8 2 1
3/8“ H7 8[0,32] H7
1/2“ H7 E 10[0,39] H7
12[0,47] H7
5/8“ H7 14[0,55] H7
1 Empfohlenes Drehmoment für Klemmring 0,6Nm
15[0,59] H7
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
46 1,81
46 1,81
37 1,46
Incremental
1
encoders
D Fit
6 [0.24] H7
50,8 2
30 °
8 [0.32] H7
10 [0.39] H7
0°
12
12 [0.47] H7
3x
14 [0.55] H7 34,2 1,35
15 [0.59] H7 7
50,2 1,98 0,1
1/4“ H7 4,3
D
3/8“ H7
1/2“ H7
5/8“ H7
1 2 3 4 5 6 7
FlangeDrehmoment
1 empfohlenes with statorfürcoupling,
Klemmringø0,6Nm
63 [2.48]
Flange type C and D
A
D 1 Passung
Recommended torque for the 40°
6[0,24] H7
clamping ring 0.6 Nm
8[0,32] H7
1
25
°
10[0,39] H7
12
12[0,47] H7
0,
14[0,55] H7
1
3,
15[0,59] H7
73,5 2,89
1/4" H7 B
30 1,18
55 2,17
63 2,48
3/8" H7 D Fit
Approv. by: Date: Material:
D
10 [0.39] H7
68
= Check item
12 [0.47] H7 2,
Prüfmaß
-0,2
68
+0,2 Drawing number:
14 [0.55] 34,2 1,35 1 2810 los 28.06.16
C H7 0,5 0,02
Ra 1,6
0 2480 al 18.06.13
Fritz Kübler GmbH Z1537 Sheet:
1/4“ H7
45,2 1,78
3/8“ H7 1 2 3 4 5 6
1/2“ H7
5/8“ H7
8[0,32] H7 7 0,2812[0,47] H7
10[0,39] H7
E B 12[0,47] H7
10[0,39] H7 15[0,59] H7
H7 1
14[0,55] H7
54,6 2,15
12[0,47] 1/4" H7
15[0,59] H7
14[0,55] H7 3/8" H7
31,5 1,24
15[0,59] H7 1/2" H7
1/4" H7 This document is property of Fritz Kübler GmbH
The reproduction, distribution and utilization of this document as well as the
Approv. by: Date: Materia
50,8 2
Offenders will be held liable for the payment of damages. Size: Scale: Produc
D Fit 1/2" H7
All rights reserved in the event of the grant of a patent, utility model or design.
A3 1:1 502
General
= Check item
Prüfmaß
8.KIH50.DXX2
10 [0.39] H7 -0,2
0°
+0,2 Drawi
1 2810 los 21.06.16
12
15 [0.59] H7 34,2
D
1/4“ H7 D
3/8“ H7
50,2
1/2“ H7
5/8“ H7
D Passung
© Fritz Kübler GmbH, subject to errors and changes. 07/2018 www.kuebler.com 83
6[0,24] H7
E 8[0,32] H7
Incremental encoders
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft) Push-pull / RS422 / Open collector
46,3 1,82
39,1 1,54 37,9 [1.49]
14 0,55
33 1,3
42 1,65
31,75 1,25
50,8 2
D
max.
2,4 0,09
3 1 2
ief
element
Zylinderstift nach DIN7 4 4
Drehmoment für Klemmring 0,6Nm
ht am Stecker aufgelegt
ng
D Fit
6 [0.24] H7
8 [0.32] H7
10 [0.39] H7
This document is property of Fritz Kübler GmbH Approv. by: Date: Material:
12 [0.47] H7 The reproduction, distribution and utilization of this document as well as the
communication of its contents to others without express authorization is prohibited.
1/4“ H7
2768-m-H
3/8“ H7 Prüfmaß
-0,2 2 2480 al 18.06.13
+0,2 Drawing number:
1/2“ H7 1 da 12.07.10
5/8“ H7
Ra 1,6
0
Rev.Nr. ECN
da
Drawn by
23.07.09
Date
Fritz Kübler GmbH
www.kuebler.com
Z1341 Sheet:
1 /1