Professional Documents
Culture Documents
Objective:
To apprehend and practice RFID 13.56 MHZ operation principle for
information communicating process between the reader and active tags.
Figure:4.1 (c) Transferring & Receiving of Packets Using RFID DUAL PROGRAM
4.2 RFID 13.5 MHz Operation Process
Radio frequency identification Its operation process when a passive tag used, is
described below.
1) RFID reader puts data in a high-frequency signal and transfers the signal through an
antenna.
2) High-frequency signal is received through the tag’s antenna.
3) A tag gets its power supplied from a high-frequency signal received from a reader, and
operates chips with in the reader with the received power.
4) A tag transfers preprogrammed data (Unique Identifier) to a reader. part of the radio
frequency signal gets altered and echoed back to a reader.
5) A reader decodes the echoed signal, and transfers it to a data collection device and a
host system.
2) Select ‘Typical from the above screen and press Next to finish installation. When the
installation is complete, the following screen is displayed.