Professional Documents
Culture Documents
English
USER’S GUIDE
Please keep all information for future reference.
Safety Precautions
Before trying to use the keyboard, be sure to read the
separate “Safety Precautions”.
Español
GUÍA DEL USUARIO
Guarde toda la información para futuras consultas.
Precauciones de seguridad
Antes de intentar usar el teclado, asegúrese de leer
las “Precauciones de seguridad” separadas.
WK210ES1A
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Declaration of Conformity
Model Number: WK-210
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Important!
Please note the following important information before using this product.
• Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check
the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is
English
seriously damaged.
• Never attempt to recharge batteries.
• Do not use rechargeable batteries.
• Never mix old batteries with new ones.
• Use recommended batteries or equivalent types.
• Always make sure that positive (+) and negative (–) poles are facing correctly as indicated near the battery compartment.
• Replace batteries as soon as possible after any sign they are getting weak.
• Do not short-circuit the battery terminals.
• The product is not intended for children under 3 years.
• Use only a CASIO AD-5 adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
Manufacturer:
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
● Company and product names used in this manual may be registered trademarks of others.
● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
● The contents of this manual are subject to change without notice.
E-1
Contents
General Guide ............................. E-4 Using Built-in Songs to
Using the 10-key Pad (bs) .................................E-6 Master Keyboard Play .............. E-31
FUNCTION Button (ct) Functions .....................E-6 Phrases............................................................ E-31
Step Up Lesson Flow....................................... E-31
Getting Ready to Play ................ E-8 Selecting the Song, Phrase, and
Preparing the Music Stand .................................E-8 Part You Want to Practice................................ E-32
Power Supply .....................................................E-8 Lessons 1, 2, and 3.......................................... E-33
Lesson Settings ............................................... E-34
Playing the Digital Keyboard ..... E-9 Using Auto Step Up Lesson............................. E-36
Turning on Power and Playing ...........................E-9
Using Headphones .............................................E-9 Music Challenge
Changing Keyboard Response to Keyboard Game ........................ E-37
Touch Pressure (Touch Response)..................E-10
Adjusting Display Contrast ...............................E-10 Using Auto Accompaniment.... E-38
Using the Voice Pads .......................................E-11
Playing the Rhythm Part Only .......................... E-38
Using the Metronome .......................................E-12
Playing All Parts ............................................... E-39
Using Auto Accompaniment Effectively ........... E-41
Controlling the Using One-Touch Preset ................................. E-42
Keyboard Sounds..................... E-14 Using Auto Harmonize ..................................... E-43
Select from a variety of
musical instrument sounds ...............................E-14 Editing Auto Accompaniment
Layering Two Tones .........................................E-15
Patterns...................................... E-44
Splitting the Keyboard between
Two Different Tones .........................................E-15
Using Reverb....................................................E-16 Saving Keyboard Setups to
Using Chorus....................................................E-16 Registration Memory ................ E-48
Using a Pedal ...................................................E-17 To save a setup to registration memory........... E-49
Changing the Pitch To recall a setup from registration memory ..... E-49
(Transpose, Tuning, Octave Shift)....................E-17
Recording Your
Sampling Sounds and Keyboard Play ........................... E-50
Playing Them on the Recording and Playing Back
Digital Keyboard ....................... E-19 Keyboard Play.................................................. E-50
Connection and Preparation.............................E-19 Using Tracks to Record and Mix Parts ............ E-51
Sampling and Playing a Melody Sound Recording Two or More Songs, and
(Melody Sampling) ...........................................E-20 Selecting One for Playback.............................. E-53
Incorporating a Sampled Sound into a Recording while Playing Along with a
Drum Set (Drum Sampling) ..............................E-22 Built-in Song..................................................... E-53
Other Sampling Functions ................................E-24 Saving Recorded Data on an
External Device................................................ E-54
E-2
Contents
English
Changing the Scale of the Keyboard................E-55
Using Music Preset ..........................................E-56
Using the Arpeggiator.......................................E-56
Deleting User Song Data..................................E-57
Deleting All Data in
Digital Keyboard Memory .................................E-58
E-3
General Guide
• In this manual, the term “Digital Keyboard” refers to the WK-210.
• In this manual, buttons and other controllers are identified using the numbers shown below.
2 1 3
4
5
6
7
8 9 bk bl bm bn bo
bs
bp
bq
br
bt ck cl cm cn co cp cq cr cs ct
dk dl dm dn do dp dk
dq dr
E-4
General Guide
1 POWER button ☞E-9, 26, 46, 49, 51, 62 bt BANK, PAD SET SELECT, CHORD/TR1,
LISTEN button ☞E-11, 21, 33, 48, 49
2 MAIN VOLUME knob ☞E-9
English
MIC VOLUME knob ☞E-19
ck Area1, VOICE PAD1, TR2, WATCH button
3 ☞E-11, 21, 33, 48, 49, 52
4 PRESET SCALE button ☞E-55
cl Area2, VOICE PAD2, TR3, REMEMBER button
5 RECORDER button ☞E-50, 51, 52, 53, 54 ☞E-11, 21, 34, 48, 49, 52
6 RHYTHM EDITOR button ☞E-44, 45 cm Area3, VOICE PAD3, TR4, NEXT button
☞E-11, 21, 32, 48, 49, 52
7 METRONOME, BEAT button ☞E-12
cn Area4, VOICE PAD4, TR5, AUTO button
8 INTRO, REPEAT button ☞E-29, 34, 41, 44, 45 ☞E-11, 21, 36, 48, 49, 52
9 NORMAL/FILL-IN, REW button
co STORE, VOICE PAD5, TR6, MUSIC CHALLENGE
☞E-28, 32, 38, 41, 44, 45 button ☞E-11, 21, 37, 49, 52
bk VARIATION/FILL-IN, FF button cp SPLIT button ☞E-15, 16
☞E-28, 32, 41, 44, 45
cq LAYER button ☞E-15, 18
bl SYNCHRO/ENDING, PAUSE button
☞E-28, 41, 42, 44, 45 cr AUTO HARMONIZE/ARPEGGIATOR, TYPE button
☞E-43, 56, 57
bm START/STOP, PLAY/STOP button
☞E-27, 28, 30, 33, 34, 38, 50, 52, 53, 54 cs SAMPLING button ☞E-11, 20, 21, 22, 23, 49
bn ACCOMP ON/OFF, CHORDS, PART SELECT ct FUNCTION button ☞E-6
button ☞E-27, 30, 32, 34, 39, 43, 44, 45, 54, 61
dk Speakers
bo TEMPO buttons ☞E-13, 29, 42 dl Song Bank list
bp TONE, MUSIC PRESET button dm Music Preset list
☞E-9, 14, 20, 22, 23, 24, 26, 56
dn Rhythm list
bq RHYTHM, ONE TOUCH PRESET button
☞E-11, 14, 21, 22, 24, 38, 42, 45, 49, 50, 53, 55 do Display
br SONG BANK button ☞E-28, 30, 32, 37, 53 dp Tone list
bs Number buttons, [–]/[+] buttons ☞E-6 dq CHORD root names ☞E-39
dr Percussion instrument list ☞E-14
ds dt ek el em en
E-5
General Guide
To select a function
E-6
General Guide
See
Function Display
Page
1 Transpose Trans. E-17
English
2 Accompaniment Volume AcompVol E-42
3 Song Volume Song Vol E-30
4 Touch Response Touch E-10
5 Tuning Tune E-17
6 Reverb Reverb E-16
7 Chorus Chorus E-16
8 Sampling SAMPLING
Automatic Sampling Start AutoStrt E-24
Automatic Sampling Stop AutoStop E-25
Sampled Tone Protect (Protect) E-26
9 Step Up Lesson LESSON
Voice Fingering Guide Speak E-34
Note Guide NoteGuid E-35
Performance Evaluation Scoring E-35
Phrase Length PhraseLn E-35
10 Other Settings OTHER
Arpeggiator Hold ArpegHld E-57
Pedal Effect Jack E-17
Accompaniment Scale AcompScl E-55
LCD Contrast Contrast E-10
11 MIDI Settings MIDI
Keyboard Channel Keybd Ch E-60
Navigate Channels Navi. Ch E-60
Local Control Local E-61
Accomp Out AcompOut E-61
12 Delete DELETE
Sampled Sound Delete (tone name) E-25
User Rhythm Delete (rhythm name) E-47
User Song Delete (song name) E-57
All Data Delete All Data E-58
E-7
Getting Ready to Play
Preparing the Music Stand Using Batteries
Power Supply
Either an AC adaptor or batteries can be used to power this
Digital Keyboard. Normally, use of AC adaptor power is
recommended.
• The AC adaptor does not come with this Digital Keyboard.
2. Load six D-size batteries into the battery
Purchase it separately from your retailer. See page E-3 for compartment.
information about options. Make sure the positive + and negative - ends of the
batteries are facing as shown in the illustration.
Using the AC Adaptor
Use the AC adaptor when you want to power the Digital
Keyboard from a household electrical outlet.
Specified AC Adaptor: AD-5
DC 9V terminal
AC adaptor 3. Insert the tabs of the battery cover into the
holes on the side of the battery compartment,
and close the cover.
Tabs
E-8
Playing the Digital Keyboard
English
21 7 bq bp bs
bo bt ck cl cm cn co cs ct
• Turning off the Digital Keyboard causes most current • Do not listen to very high volume output over
settings to be cleared. The Digital Keyboard will revert headphones for long period. Doing so creates the risk
to initial settings the next time you turn it on. of hearing damage.
• This is true for all settings except for sample sound • If you are using headphones that require an adaptor
protection. Once you turn it on it remains on until you plug, make sure you do not leave the adaptor plugged
turn it off again. in when removing the headphones.
E-9
Playing the Digital Keyboard
OTHER
Do not try to use too much
pressure. 2. Press bs (10-key) [7] (ENTER) key.
3. Use the bs (10-key) [4] (o) and [6] (p) keys
to display “Contrast”.
Con t r as t
4. Use the bs (10-key) [–] and [+] keys to adjust the
contrast.
• The contrast setting range is 01 to 17.
E-10
Playing the Digital Keyboard
English
even sounds you have sampled (page E-19). Use the voice 1 through 4 (see below). Each press of bt cycles through
pads to add something extra to your performances. sound sets 1 through 4.
1. Press bq. bt ck cl cm cn co
Lit when on
• Pressing cs and ct at the same time again will disable Pad 1 Pad 2 Pad 3 Pad 4 Pad 5
the voice pads. VOICE 1 VOICE 2 VOICE 3 VOICE 4 VOICE 5
Set 1
(Tone 571)*1 (Tone 572)*1 (Tone 573)*1 (Tone 574)*1 (Tone 575)*1
Pad Se t
E-11
Playing the Digital Keyboard
Bea t
• If you do not perform any operation for a few seconds
after the beats per measure setting screen appears, the
3. While still holding down the two buttons, keep display will return to the screen displayed before you
pressing and releasing any keyboard key. pressed 7.
• Each press of the keyboard key will sound the tone
assigned to the voice pad. As you listen to the tone, 2. Use bs (10-key) to enter the number of beats
adjust its volume by altering the speed at which you are per measure.
pressing the keyboard key. Pressing at a faster rate will • The bell will not sound if you specify 0 for this setting. In
raise the volume, while a slower rate will lower the this case, all beats are indicated by a click sound. This
volume. setting lets you practice with a steady beat, without
worrying how many beats there are in each measure.
4. After the tone is at the volume you want, release
the two buttons you depressed in step 2.
• You can batch adjust the volume level of more than one
voice pad by holding down more than one voice pad along
with bt in step 2 above.
E-12
Playing the Digital Keyboard
English
metronome.
1. Press bo.
Use y (slower) and t (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing t and y at the same time will initialize the
tempo setting in accordance with the currently selected
song or rhythm.
• Pressing bo causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
bs (10-key) to change it.
Note that you must input leading zeros, so 89 is input
as 089.
• The tempo value will stop flashing if you do not perform
any operation for a short while.
E-13
Controlling the Keyboard Sounds
bqbp bs
cp cq ct
1. Press bp.
Tone number Tone name Playing with a Piano Tone (Piano Setup)
Settings
Tone Number : “001”
2. Use bs (10-key) to select the tone number you Reverb : “06”
want. Transpose : 00
The corresponding tone number and tone name will Touch Response : Off: Returns to initial default
appear on the screen. On: No change
Pedal Effect : SUS
Rhythm Number : “161”
• See the separate “Appendix” for a complete list of available Accompaniment : Rhythm part only
tones. Local Control : On
• Use the number buttons to enter the tone number. Specify Drum Assign : Off
three digits for the tone number. Split : Off
Example: To select 001, enter 0 3 0 3 1. Layer : Off
• When one of the drum sets is selected, each keyboard key Chorus : Off
is assigned a different percussion sound.
Octave Shift (Upper) : 0
Auto Harmonize : Off
Arppegiator : Off
Scale : Equal
E-14
Controlling the Keyboard Sounds
English
tones (such as piano and strings) so they sound
You can use the procedure below to assign different tones to
simultaneously when you press a keyboard key.
the right range and left range of the keyboard, so it sounds
1. Select the first tone you want to use. like you are playing an ensemble between two instruments.
Press bp and then use bs (10-key) to select the tone you
want. To select the two tones for a split keyboard
Example: 021 ELEC.PIANO 1
1. Select the tone for the right side range (page
E-14).
E.Pi ano1 Press bp and then use bs (10-key) to select the tone you
want.
Example: 273 FLUTE 1
2. Press cq.
F l u t e 1
2. Press cp.
Lights
VIBRAPHONE 1 FLUTE 1
Split point
Disappears
F3
E-15
Controlling the Keyboard Sounds
Disappears
Reve r b
2. Use the bs (10-key) [–] and [+] keys to select the
• If you turn on both layer and split, layering will be applied to
reverb setting you want.
the right side range of the keyboard only.
Off (oFF) Turns off reverb.
To change the split point
1 to 10 The larger the number selected, the longer
the reverb duration.
1. While holding down cp, press the keyboard key
where you want the split point to be.
The key you press will become the lowest note of the right
side range of the split keyboard.
Example: Setting middle C (C4) as the split point.
Reve r b
Key name Indicator disappears when reverb is turned off.
C 4 Using Chorus
Chorus is a function that adds depth and breadth to notes. It
makes you sound as if you are playing multiple instruments.
Cho r us
2. Use the bs (10-key) [–] and [+] keys to select the
chorus type you want.
There are five chorus types, plus an off setting.
Cho r us
Indicator disappears when chorus is turned off.
E-16
Controlling the Keyboard Sounds
English
playing.
• A pedal unit does not come with the Digital Keyboard.
Purchase one separately from your retailer. See page E-3 Changing the Pitch in Semitone Steps
for information about options. (Transpose)
The transpose feature lets you change the pitch, in semitone
Connecting a Pedal Unit steps. A simple operation lets you instantly change the pitch
Connect an optional pedal unit. to match that of a singer.
• The transpose setting range is –12 to +12 semitones.
SUSTAIN/ASSIGNABLE JACK
1. Press ct.
Trans .
2. Use the bs (10-key) [–] and [+] keys to select the
Selecting the Pedal Effect transpose setting you want.
1. Press ct and then use the bs (10-key) [4] (o) Fine Tuning (Tuning)
and [6] (p) keys to display “OTHER” (page
Use the tuning feature when you need to adjust the pitch
E-6). slightly to play along with another musical instrument. Also,
Flashes some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
OTHER • The tuning setting range is –99 to +99 cents.
E-17
Controlling the Keyboard Sounds
Octave Shift
Octave Shift lets you raise or lower the pitch of the keyboard
notes in octave units.
• The octave shift setting range is –2 to +2 octaves.
• When using Split (page E-15), you can individually set the
left and right keyboard ranges to the pitches you want.
Oc t Uppe r
2. Use the bs (10-key) [–] and [+] keys to shift the
octave.
• Split On : This step affects the right side keyboard
range only.
• Split Off : This step affects the entire keyboard range.
3. Press cq.
• Split On : The screen shown below will appear. Use the
bs (10-key) [–] and [+] keys to shift the
octave for the left side keyboard range.
• Split Off : The screen shown below will appear.
Advance to step 4.
Oc t Lowe r
4. Press cq again.
E-18
Sampling Sounds and Playing Them on the Digital
Keyboard
English
1 3 bqbp bs
bt ck cl cm cn co cs ct
You can sample sounds from a microphone, from a portable 2. Turn down the volume levels of the external
audio player, or other device, and then play the sound on the device and the Digital Keyboard.
keyboard or voice pads. For example, you could sample the
bark of your dog and then use the sound in a melody. You 3. Turn on the external device or microphone, and
also can sample and use passages from a CD. The sampling
then turn on the Digital Keyboard.
feature is a great way to create new sounds that are highly
• When using a microphone, adjust the input volume
creative.
level with 3.
MIC IN jack
E-19
Sampling Sounds and Playing Them on the Digital Keyboard
To sample a sound
Samp l i n g
Flashes
E-20
Sampling Sounds and Playing Them on the Digital Keyboard
■ How sampled sounds are played Changing the Volume of Sampled Sound
Pressing Middle C (C4) will play back the original sound. The
Looped Playback
keys to the left and right of C4 play the sound at different
English
pitches. You can use the following procedure to change the volume
level of the looped playback of each sampled sound, if you
want.
2. While holding down cs, press bt. 3. After the sampled sound is at the volume level
This enters repeat standby. you want, release its button (ck to co).
Funk 8B t
Lights
E-21
Sampling Sounds and Playing Them on the Digital Keyboard
Effect Type
1. Press bq.
Description bq lights.
(Display)
Original (Orgnl)
Normal sampled tone (no looping, no 2. Press bp and then use bs (10-key) to enter the
effect). tone number 576, 577, or 578 for the drum set
Loop 1 (Loop1) Loops the sampled sound. whose sounds you want to change.
Loops the sample sound and raises the
Loop 2 (Loop2) pitch of the resonating sound when the
keyboard key is released. No Da t a
Loops the sample sound and lowers the
Loop 3 (Loop3) pitch of the resonating sound when the Lights
keyboard key is released.
Changes the pitch from low to high, at an • In place of the above steps, you could press cs and bq
Pitch 1 (Ptch1) at the same times and then select a tone number.
increasing rate.
Pitch 2 (Ptch2)
Changes the pitch from high to low, at a 3. Press cs.
decreasing rate.
Pitch 3 (Ptch3)
Changes the pitch from high to low, at a
decreasing rate, and then raises the pitch
when the key is released.
No Da t a
Tremolo (Treml) Alternates volume between high and low.
Flashes
Adds vibrato and changes the pitch by a
Funny 1 (Funy1)
gradually increasing amount.
4. Press the keyboard key to which you want to
Alternates between high pitch and low
Funny 2 (Funy2) assign the drum sound you are about to
pitch.
sample.
Adds vibrato and changes the pitch from
Funny 3 (Funy3) This enters sampling standby.
low to high.
The allowable sampling time (in seconds) will appear on
• Avoid assigning the same sampled sound to the keyboard the display momentarily and then the display will change
for play along and for looped play. Doing so will cause, the to the following.
Loop 1 effect to be applied to the keyboard tone while
looped play of the sampled sound is being performed.
Wa i t i n g
Flashes
Samp l i n g
Flashes
E-22
Sampling Sounds and Playing Them on the Digital Keyboard
6. After the sound you want to sample is finished, Editing Sampled Drum Set Sounds
press cs.
You can use the procedures in this section to copy the drum
English
sound assigned to one keyboard key to another key, to
Smp l D r m1 change the pitch of a sound, and to delete a sampled sound.
• You can repeat steps 3 through 6 to change other sounds This is the editing mode.
that make up the currently selected drum set. There are • While in the editing mode, you can copy a sound,
eight sounds per drum set. change the pitch of a sound, or delete a sound (each of
• You may not be able to get 10 seconds of sampling if which is described below). Pressing ct again exits the
Digital Keyboard memory is low due to storage of other editing mode and returns to step 2 of this procedure.
data. If this happens, deleting other memory data you no
longer need will free up memory space and you should be
able to sample for 10 seconds. See “Deleting a Sampled
Indicates keyboard keys that have sounds assigned.
Sound” on page E-25 for more information.
E-23
Sampling Sounds and Playing Them on the Digital Keyboard
Disappears
SAMP L I NG
Using a Drum Sampling Tone in Auto
Accompaniment (Drum Assign)
2. Press the bs (10-key) [7] (ENTER) key.
Use the following procedure to change the rhythm part of an
Auto Accompaniment pattern to a drum set sound that you
sampled.
Au t oS t r t
1. Press bq and then use bs (10-key) to enter the
rhythm number of the Auto Accompaniment
pattern you want. 3. Press the bs (10-key) [–] key to turn off
You cannot use a Drum Sampling Tone in a user rhythm, automatic sampling start.
so do not select a user rhythm in the above step. This enables manual sampling start, which operates as
described below.
2. Press bp and then use bs (10-key) to enter the • Melody sampling (page E-20):
tone number of the sampling drum set that Sampling starts when you release cs, which you press
contains the sound you want to use. in step 2 of the sampling procedure.
• Drum sampling (page E-22):
3. Press bp. Sampling starts when you release the Digital Keyboard
key you press in step 4 of the sampling procedure.
This changes the rhythm part of the Auto Accompaniment
pattern you selected in step 1 to the sampled sound you
selected in step 2.
• To change the Auto Accompaniment rhythm part back • When manual sampling start is enabled, sampling
to its original sound, press bp again. starts when you release cs or the keyboard key, not
when you press it. Sampling does not start if you hold
down the button or key.
• Some rhythm part drum sounds cannot be replaced by
sampled sounds.
E-24
Sampling Sounds and Playing Them on the Digital Keyboard
English
whenever it detects there is no sound input. You can use the tone number and delete its data.
following procedure to enable manual sampling stop, which
will cause sampling to continue until you press a button to 1. Press ct and then use the bs (10-key) [4] (o)
stop it. You can use this to insert silence after the sampled and [6] (p) keys to display “DELETE” (page
sound. E-6).
1. Press ct and then use the bs (10-key) [4] (o) Flashes
Au t oS t o p
S1 :Or g n l
4. Press the bs (10-key) [–] key to turn off Used memory Remaining memory
automatic sampling stop. (Unit: Kbytes) capacity
Even when there is no sound input from an external
device, sampling will continue until you press and release
cs or a keyboard key. 3. Use the bs (10-key) [–] and [+] keys to select the
tone number of the data you want to delete.
• When manual sampling stop is enabled, sampling 4. Press the bs (10-key) [7] (ENTER) key.
stops when you release cs or the keyboard key, not This displays a delete confirmation message.
when you press it. Sampling does not stop if you hold
down the button or key.
Su r e?
5. Press the bs (10-key) [+] (YES) key to delete the
data, or [–] (NO) or [9] (EXIT) to cancel the
delete operation.
• After the delete procedure is complete, “Complete” will
appear on the display followed by the screen in step 2
of the above procedure.
E-25
Sampling Sounds and Playing Them on the Digital Keyboard
Pro t ec t
5. Press the bs (10-key) [+] key to turn on
protection.
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
Protected
*1 : Or g n l
■ Saving Sample Data on an External Device
See page E-62 for details about how to transfer sampled data
to a computer for storage.
E-26
Playing Built-in Songs
English
br bs
8 9 bk bl bm bn bo ct
With this Digital Keyboard, built-in tune data is referred to as 2. To change to another song while demo
“songs”. You can listen to the built-in songs for your own playback is in progress, use bs (10-key) [–] and
enjoyment, or you can play along with them for practice.
[+] keys to enter the song number you want
(page E-6).
This will cause demo playback to jump to the song whose
• In addition to simple listening enjoyment, the built-in songs
number you entered.
can be used with the lesson system (page E-31) for
• You cannot use bs (10-key) number buttons to select a
practice.
song.
• You can increase the number of tunes using your computer
(page E-59).
3. To stop demo playback, press bm.
Demo playback continues until you stop it by pressing bm.
Playing the Demo Songs
Use the following procedure to play back built-in songs.
Flashes
Demo T u n e
E-27
Playing Built-in Songs
Tw i n k l e ■ Skip Forward
1. Press bk.
This skips song playback forward to the next measure.
2. Use bs (10-key) to enter the number of the song Each press of bk skips ahead one measure. Holding
down bk skips forward at high speed until you release it.
you want.
• Pressing bk while song playback is stopped performs
• See page E-69 for a complete list of available songs. lesson function phrase skip forward (page E-32).
3. Press bm.
This starts playback of the song.
Tempo
Note Beat
Sustain pedal Measure
Measure number
■ Skip Back
1. Press 9.
This skips song playback back to the previous measure.
Each press of 9 skips back one measure. Holding down
Key Fingering
9 skips back at high speed until you release it.
• Pressing 9 while song playback is stopped performs
4. Press bm again to stop playback. lesson function phrase skip back (page E-32).
Song playback will continue (repeat) until you press bm to
stop it. You can cancel song repeat by pressing 8
(“REPEAT” indicator disappears from the display).
E-28
Playing Built-in Songs
English
measures for practice playing along until you master it. You
can specify the start measure and the end measure of the
section you want to play and practice.
Start End
Disappears
These measures are repeated.
Lights
E-29
Playing Built-in Songs
Adjusting the Song Volume Turning Off the Part of One Hand for Practice
Use the following procedure to adjust the balance between (Part Select)
the volume of what you play on the keyboard and song You can turn off the right hand part or the left hand part of a
playback volume. song during playback and practice playing along with the
remaining part.
1. Press ct and then use the bs (10-key) [4] (o)
and [6] (p) keys to display “Song Vol” (page 1. Press bn to select the part you want to turn off.
E-6). Each press of bn cycles through the settings shown
below.
• If you select a song that uses different tones for left and
right hand play, the right hand part tone is assigned to the • During playback with one part turned off, only the notes of
keyboard. the part that is turned off are shown on the display.
E-30
Using Built-in Songs to Master Keyboard Play
English
br bs
8 9 bk bm bn bt ck cl cm cn ct
4
After mastering all of the phrases,
practice the entire song.
4
Now you have mastered the entire
song!
E-31
Using Built-in Songs to Master Keyboard Play
Messages that Appear during Lessons 2. Press cm (or bk) to move forward one phrase, or
The following are the messages that appear on the display
9 to move back one phrase.
• Holding down bk or 9 scrolls through phrases at high
during Step Lessons.
speed.
Message Description • The Digital Keyboard remembers the last phrase you
practiced for up to 20 songs. To recall the last practice
<Phrase> Appears when you select a phrase, when a phrase for the current song (if it is available), hold down
lesson starts, etc. cm.
• Note that certain phrases will cause “Wait”
to appear instead of “Phrase”. Phrase number
E-32
Using Built-in Songs to Master Keyboard Play
English
part you want to practice. During this lesson, the display shows the key you need to
press next. Voice fingering guide uses a simulate voice to
Lesson 1: Listen to the song. announce which finger you should use.
<Lesson 2 Guidance>
Lights
E-33
Using Built-in Songs to Master Keyboard Play
Lesson 3: Remember what you learned as Playing a Particular Song All the Way
you play. Through
Though song playback stands by waiting for you to press the After you successfully complete all of the phrases in Lessons
correct keys as in Lesson 2, the Digital Keyboard does not 1, 2, and 3, it is time to try playing the entire song from
provide any guidance about what note you need to play next. beginning to end.
Remember everything you have learned up to Lesson 2 as
you play. 1. Use bn to turn off both hand parts and then
press bm.
1. Press cl. Try playing with both hands and find out how the Digital
This starts Lesson 3. Keyboard evaluates your effort.
Lights
Lesson Settings
1. Press 8.
Lights
This disables phrase repeat play.
4
Disappears
Song playback will wait for you to play the correct note.
• Note guide sounds the correct note to be played.
Turning Off Voice Fingering Guide
4
Use the following procedure to turn off voice fingering guide,
If you are still unable to press the correct keyboard which tells you which finger to use to play each note in
key, the Digital Keyboard will display keyboard Lesson 2 and Lesson 3.
guidance and voice fingering guide will tell you what
finger to use, just as in Lesson 2. 1. Press ct and then use the bs (10-key) [4] (o)
and [6] (p) keys to display “LESSON” (page
4 E-6).
Pressing the correct key will cause song playback to Flashes
resume.
Speak
E-34
Using Built-in Songs to Master Keyboard Play
3. Press the bs (10-key) [–] key to select the OFF Changing the Phrase Length
setting.
You can use the following procedure to change the length of
English
lesson phrases, or to configure the lesson feature so the song
Indicator disappears
is played all the way through, without being divided into
when voice fingering
guide is turned off. phrases.
4. Press the bs (10-key) [–] key to select the OFF The following options are available for songs loaded from
setting. external sources only.
Sco r i n g
E-35
Using Built-in Songs to Master Keyboard Play
4
Lesson complete
E-36
Music Challenge Keyboard Game
English
1 brbq
brbqbp
bm co
Music Challenge is a game that measures your reaction 4. The game ends when you advance successfully
speed as you press keys in response to on-screen keyboard through 20 notes.
indicators and fingering guide indications.
• Your playing time appears on the display. After a short
while, the playing time display changes to a score. To
1. Press br. clear the score from the display, press bp, bq, or br.
• You can cancel a game at any time by pressing co or
2. Press co. bm.
This causes a key on the on-screen keyboard to start to
flash, and starts the Music Challenge song. Playing time
M . CHA L . ! T i me 1 9 . 2
Score
Fingering
Displayed during a game. Sco r e 80
3. After the on-screen keyboard indicator changes
from flashing to lit, press the indicated key with
the indicated finger as quickly as possible. • Notes and fingering guide fingers are indicated randomly.
This causes the on-screen keyboard key to go out to let • The tempo of the game songs cannot be changed.
you know that you cleared the first note. The next on- • All buttons except 1, bm, and co are disabled while a game
screen keyboard key starts to flash, so get ready to press is in progress.
the next key.
• The time it takes you to press the keyboard key after
the on-screen key lights appears on the display (Unit:
0.1 sec). The shorter the time, the higher your score.
• Pressing a keyboard key before the on-screen key
goes from flashing to lit, will not advance to the next
note.
Time 0.3sec
M . CHA L . !
E-37
Using Auto Accompaniment
bq bs
8 9 bk bl bm bn bo cr ct
E-38
Using Auto Accompaniment
English
Auto Accompaniment with Chords
• For information about starting Auto Accompaniment as
Playing a chord with your left hand automatically adds bass soon as a chord is played, see “Using Synchro Start” on
and harmony accompaniment parts to the currently selected page E-42.
rhythm. It is just like having your own personal back up group • You can use the split point to change the size of the
on call. accompaniment keyboard range (page E-16).
1. Start play of the Auto Accompaniment rhythm
part.
Selecting a Chord Input Mode
You can select from among the following five chord input
2. Press bn. modes.
This enables chord input on the accompaniment • FINGERED 1
keyboard. • FINGERED 2
• FINGERED 3
Accompaniment keyboard
• CASIO CHORD
• FULL RANGE CHORD
Cho r d
2. Use the bs (10-key) [–] and [+] keys to select the
3. Use the accompaniment keyboard to play chord input mode you want.
• If you do not perform any operation after the chord input
chords.
mode selection screen appears, the display will return
This will cause bass and harmony Auto Accompaniment automatically to the screen that was displayed before
parts to be added to the rhythm part. you held down bn.
Chords
(no melody played) Melody
F3
E-39
Using Auto Accompaniment
Play the component notes of the chord on accompaniment area key that
the keyboard. corresponds to the major chord, while
also pressing one other
accompaniment area key to the right.
● FINGERED 2
Seventh Chords C7 (C Seventh)
Unlike FINGERED 1, 6th input is not
possible. m7 or m7b5 is input.
To play a seventh chord, press the C C#D Eb E F F#G Ab A Bb B C C#DEb E F
E-40
Using Auto Accompaniment
English
• A “fill-in” is a short phrase played where you want to change
the mood of a piece. A fill-in pattern can be used to create a
Auto Accompaniment Pattern Variations link between two melodies or an accent.
• Normal and variation patterns have their own unique fill-in
Use the following procedures to play intro and ending
patterns.
patterns, to play fill-in patterns, and to play variations of basic
Auto Accompaniment patterns. ● Normal Pattern Fill-in
2. Pressing 9 returns to normal pattern. 1. While a variation pattern is playing, press bk.
This plays the fill-in for the variation pattern.
Lights
• Variation pattern play will resume after the fill in pattern
is complete.
Lights
E-41
Using Auto Accompaniment
A c ompVo l
2. Use the bs (10-key) [–] and [+] keys to adjust the
2. Play a chord on the keyboard. accompaniment volume.
This will start full part accompaniment (normal).
Changing Auto Accompaniment Speed 1. Hold down bq until the current tone screen
(Tempo) appears on the display.
This will automatically apply the One-Touch Preset
Use the following procedure to change Auto Accompaniment
settings in accordance with the rhythm pattern that is
speed to a level that suits you.
currently selected.
1. Press bo. 2. Play a chord on the keyboard.
Use y (slower) and t (faster) to change the tempo
This will start accompaniment automatically.
setting. Holding down either button changes the setting at
high speed.
• Pressing y and t at the same time will initialize the
tempo setting in accordance with the currently selected
rhythm.
• While the tempo value is flashing, you also can use bs
(10-key) to change it.
• If you do not perform any operation for a few seconds
after the tempo setting screen appears, the display will
return to the screen displayed before you pressed bo.
Flashes
E-42
Using Auto Accompaniment
Type
Using Auto Harmonize number
Type Name Description
Auto Harmonize automatically adds harmony to notes you
English
Adds close (separated by 2 to 4
play with your right hand, which adds rich depth to the melody
001 Duet 1 degrees) 1-note harmony below
of your performances. You can select from among 12 types of
the melody note.
Auto Harmonize to suit the type of music you are playing.
Adds open (separated by more
002 Duet 2 than 4 to 6 degrees) 1-note
harmony below the melody note.
• Auto Harmonize is controlled using the same button cr as
the Arpeggiator (page E-56). Because of this, these two 003 Country Adds country style harmony.
functions cannot be used at the same time. Adds the note from the next lower
004 Octave
octave.
1. Press bn to enable Auto Accompaniment with
chords (ACCOMP indicator lit) (page E-39). 005 5th Adds the fifth degree note.
• Auto Harmonize cannot be used while FULL RANGE Adds 2-note open harmony, for a
006 3-Way Open
CHORD is selected as the chord input mode. Select total of three notes.
another mode if you want to use Auto Harmonize. Adds 2-note close harmony, for a
007 3-Way Close
total of three notes.
2. Hold down cr until the Auto Harmonize or
Arpeggiator type number and type name appear Adds harmony that is optimal for
008 Strings
strings.
on the display.
• If you do not perform any operation for a few seconds, Adds 3-note open harmony, for a
009 4-Way Open
the display will return to previous screen automatically. total of four notes.
Due t 2 S tGrPno
Lit when on
E-43
Editing Auto Accompaniment Patterns
1 6 bq bs
8 9 bk bl bm bn ct
You can use the procedure in this section to edit the Digital ■ Editable Contents
Keyboard’s built-in Auto Accompaniment rhythm patterns and • Rhythm number
create your own “user rhythms”. • Part on/off
• You can store up to 10 user rhythms in Digital Keyboard • Tone number
memory, using rhythm numbers 181 through 190. • Volume level
• Left-right speaker balance (panning)
■ Editable Accompaniment Patterns and • Reverb depth (reverb send)
Instrument Parts • Chorus depth (chorus send)
Any of the following parts that make up each rhythm that is
assigned a rhythm number can be edited. To edit and save an Auto Accompaniment
Accompaniment patterns (intro, fill-in, etc.): 6 types
Instrument parts (drum, bass, etc): 8 types 1. Select the number of the rhythm you want to
Accompaniment Pattern edit.
VARIATION
VARIATION
2. Press 6.
NORMAL
NORMAL
ENDING
FILL-IN
FILL-IN
INTRO
I N NF V VF E
1 Drum I-1 N-1 NF-1 V-1 VF-1 E-1 bn
Drm: Rh y .
2 Percussion I-2 N-2 NF-2 V-2 VF-2 E-2
3 Bass I-3 N-3 NF-3 V-3 VF-3 E-3
4 Chord 1 I-4 N-4 NF-4 V-4 VF-4 E-4
Lights Accompaniment Pattern (Flashes)
5 Chord 2 I-5 N-5 NF-5 V-5 VF-5 E-5
6 Chord 3 I-6 N-6 NF-6 V-6 VF-6 E-6 If the “Err Mem Full” message appears on the display, see
7 Chord 4 I-7 N-7 NF-7 V-7 VF-7 E-7 page E-68 for information about what you should do.
Button 8 9 9 bk bk bl
E-44
Editing Auto Accompaniment Patterns
3. Press a button from 8 to bl to select the 7. To edit the other contents, press ct to display
Accompaniment Pattern you want to edit. the screen for the setting you want.
The name of the pattern will appear on the display. • Each press of ct will cycle through the settings shown
English
below, from 1 through 6.
• Use the bs (10-key) [–] and [+] keys to change the
D r m : Rh y . currently selected setting.
• You can play the current settings of the editable part by
pressing bm.
bk Variation selected
Setting Type Display Settings
Pattern selected by each button 1 Part on/off Part On/Off
8: Intro 2 Tone number* Tone 001 - 553
9: Normal, Normal Fill-in
(Each press toggles the selection.) 3 Volume level Vol. 000 - 127
bk: Variation, Variation Fill-in Left-right speaker
(Each press toggles the selection.) 4 Pan –64 - 0 - +63
balance (panning)
bl: Ending Reverb depth
5 Rvb 000 - 127
(reverb send)
4. Press bn to select the instrument part you want
to edit. Chorus depth
6 Cho. 000 - 127
The part number of the part you select will flash on the (chorus send)
display. * Instrument parts 1 and 2 can be assigned drum set tones
(554 through 570) only.
Parts that contain data. Flashing: Part selected for editing.
8. Repeat steps 4 through 7 as many times as
necessary to edit the parts you want for the
pattern you selected in step 3.
• If you change the rhythm number in step 6, the editable
Part 6 (Chord 3) contents (1 through 6 in the above table) you last
configured in step 7 of this procedure will be overwritten
with the settings of the newly selected rhythm.
5. Press bq.
This will display the rhythm number. 9. Repeat steps 3 through 8 as many times as
necessary to edit the accompaniment patterns
6. Use the bs (10-key) [–] and [+] keys to select the
you want (intro through ending).
rhythm number you want to assign to the
instrument part you are editing. 10. Press 6.
A different rhythm number is assigned for each instrument This will display a message asking if you want to save the
part. user rhythm.
• You can play the data of the currently selected rhythm
number by pressing bm. 11-1. Press the bs (10-key) [–] key to exit without
• All of the eight instrument parts of an intro (I-1 to 8) saving.
must have the same rhythm number. If you assign
This displays the delete confirmation message.
rhythm 003 to I-1, for example, 003 also will be
Press the bs (10-key) [+] key to exit the editing procedure.
assigned automatically to parts I-2 through I-8. If you
then assign rhythm 004 to part I-2, for example, I-1 and
all of the other parts also will change to 004. All of the
eight parts of an ending (E-1 to E-8) also must have the
same rhythm number.
E-45
Editing Auto Accompaniment Patterns
11-2. Press the bs (10-key) [+] key to save the data. ■ Saving User Rhythm Data on an External Device
See page E-62 for details about how to transfer edited
accompaniment data to a computer for storage.
E-46
Editing Auto Accompaniment Patterns
English
Accompaniment editing (rhythm edit) operation is in progress.
DELETE
Used memory (Unit: Kbytes)
Use 1
4. Use the bs (10-key) [–] and [+] keys to select the
user rhythm you want to delete.
Su r e?
6. Press the bs (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
E-47
Saving Keyboard Setups to Registration Memory
1 bq bs
bt ck cl cm cn co cs ct
Registration memory lets you store Digital Keyboard setups ■ Registration Save Example
(tone, rhythm, etc.) for instant recall whenever you need them. This example saves the data shown in the table below to the
Registration memory simplifies performance of complex following setups in Bank 1.
pieces that require successive tone and rhythm changes. • Initial melody setup saved to Setup 1-1.
• Second melody setup saved to Setup 1-2.
You can have up to 32 setups in Registration memory at one • Third melody setup saved to Setup 1-3.
time. bt and ck to cn are used for recording.
Setup 1–1 Setup 1–2 Setup 1–3
Tone Number 001 062 001
bt ck cl cm cn
Rhythm Number 118 005 089
Tempo 080 140 089
E-48
Saving Keyboard Setups to Registration Memory
English
1. Press bq. 1. Press bt to select the bank that contains the
setup you want to recall.
2. Press cs and ct at the same time to enable
registration.
• Pressing cs and ct at the same time again will disable
registration.
Lit when on
Bank 6
E-49
Recording Your Keyboard Play
1 5 brbq
brbqbp bs
bm bn bt ck cl cm cn co
The recorder feature lets you record your keyboard play. 4. Configure the tone, rhythm, and other settings
you want to use.
Recording and Playing Back 5. Start playing.
Keyboard Play Recording starts as soon as you play something on the
keyboard.
Use the following procedure to record everything you play on
the keyboard.
1. Press bq. • You can use Auto Accompaniment while playing. If you do,
Auto Accompaniment also will be recorded.
2. Press 5.
6. To stop recording, press bm.
Lights
Lights
Flashes
E-50
Recording Your Keyboard Play
English
You can divide a song according to various types of parts
(instrument, left and right hand, etc.), and record each part to
Disappears a specific track. You can mix up to six tracks (the original track
plus five additional tracks) into a final song.
• The flashing on the screen shown in step 3 becomes
■ About tracks
faster when remaining recorder memory capacity
Tracks are numbered from 1 to 6.
becomes less than 100 notes.
• If you do not specify a track number when recording,
• Total recorder memory capacity is approximately
recording is performed to Track 1 automatically.
12,000 notes. Recording will stop automatically when
there is no more unused recorder memory remaining.
In addition to what you play on the keyboard, the following
• Each press of 5 cycles through the settings shown
information also is recorded.
below. You can listen to the recorded data as many
• Track 1
times as you like by pressing bm while in playback
Settings:
standby.
Tone number, rhythm number, tempo, reverb, chorus,
chords, layer/split settings, Auto Harmonize/Arpeggiator
setting
Playback Record
Recorder Off Operations:
Standby Standby
Pedal, INTRO button, SYNCHRO/ENDING button,
NORMAL/FILL-IN button, VARIATION/FILL-IN button
• Tracks 2 through 6
Tone number, pedal operation
Disappears Lights Flashes
E-51
Recording Your Keyboard Play
Flashes
Flashes
4. Press bm.
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.
E-52
Recording Your Keyboard Play
English
You can record up to five songs (numbered 1 through 5) in This section explains how to play along and record along with
memory. After that, you can select a specific song for one of the Digital Keyboard’s built-in songs.
playback.
● The following operations and settings also are
1. Press bq. recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, reverb,
2. Press 5. chorus, layer/split settings
A song number will appear in the upper left corner of the
display for a few seconds. While it is, use bs (10-key) to
specify the number of the song you want to record or play • There can be only one recording of keyboard play with a
back. The song number will disappear if you do not built-in song in recorder memory. Making a new recording
perform any operation. replaces (deletes) previously recorded data.
Example: Song 2
1. Press br.
Pl a y No . 2. Press 5.
This will enter playback standby.
Flashes
Flashes
E-53
Recording Your Keyboard Play
Left-hand Recording
Both-hand Recording
Flashes
Lights
8. Press bm.
This will start playback of what you recorded.
• Each press of bm starts and stops playback.
Disappears
E-54
Other Useful Digital Keyboard Functions
English
4 bqbp bs
cr ct
1. Press bq.
Changing the Scale of the
Keyboard 2. Press 4.
Scale number Scale name
You can use the procedure in this section to change the scale
(tuning system) of the keyboard from the standard equal
temperament to another scale that is more suitable for playing
Indian music, Arabic music, ancient classics, etc. Equa l
You can select from among the 17 preset scales listed below.
E-55
Other Useful Digital Keyboard Functions
Lights
Due t 1
2. Use bs (10-key) to select the preset number you 2. Use the bs (10-key) [–] and [+] keys to select the
want.
Arpeggiator type you want.
This will change the setup (tone, rhythm, etc.) of the
• 001 through 012 are Auto Harmonize types (page
Digital Keyboard.
E-43). Do not select them when using the Arpeggiator.
• At this time the Digital Keyboard will go into Auto
Accompaniment synchro start standby (page E-42). Octave
• Pressing bp, bq, or br will return to the screen that was 1 .. Uses the actual notes played.
2 .. Uses the actual notes played plus the same notes one octave.
displayed before you held down in step 1, above. 4 .. Uses the actual notes played plus the same notes three octaves.
Type
Type Name Description
number
013 - 030 Up Rising
031 - 048 Down Falling
Repeat pattern alternating
049 - 066 U/D A between rising and falling
(Type A)
Repeat pattern alternating
067 - 084 U/D B between rising and falling
(Type B)
Random arrangement of
085 - 102 Random
notes of the pressed keys
E-56
Other Useful Digital Keyboard Functions
English
stored as song numbers 153 through 162.
Lit when on
DELETE
• The tempo setting of the Arpeggiator is the same as that set
Used memory (Unit: Kbytes)
for the metronome (page E-12).
1. Press ct and then use the bs (10-key) [4] (o) 2. Press the bs (10-key) [7] (ENTER) key.
and [6] (p) keys to display “OTHER” (page
E-6). 3. Press the bs (10-key) [6] (p) button twice.
User song name
2. Press bs (10-key) [7] (ENTER) key.
Ar p egH l d USERSONG
3. Press the bs (10-key) [+] key to select the ON 4. Use the bs (10-key) [–] and [+] keys to select the
user song you want to delete.
setting.
5. Press the bs (10-key) [7] (ENTER) key.
This displays a delete confirmation message.
Su r e?
6. Press the bs (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
E-57
Other Useful Digital Keyboard Functions
DELETE
Used memory (Unit: Kbytes)
Al l Da t a
4. Press the bs (10-key) [7] (ENTER) key.
This displays a delete confirmation message.
Su r e?
5. Press the bs (10-key) [+] (YES) key.
After the delete procedure is complete, “Complete” will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
E-58
Connecting External Devices
English
1 bs
bn ct
• Never connect to a computer that does not conform to Computer USB port
the above requirements. Doing so can cause problems
with your computer.
E-59
Connecting External Devices
MIDI Settings
Nav i . Ch
Keyboard Channel 4. Use the bs (10-key) to specify the navigate (R)
channel.
A keyboard channel is the channel used for sending Digital This also will automatically configure the next lower
Keyboard data to a computer. You can select the channel you channel number as the navigate (L) channel.
want for sending Digital Keyboard data to a computer.
• The keyboard channel setting range is 01 to 16.
MIDI
2. Press bs (10-key) [7] (ENTER) key.
Keybd Ch
3. Use the bs (10-key) [–] and [+] keys to change
the keyboard channel.
E-60
Connecting External Devices
English
you may not want the Digital Keyboard to sound notes you
channels and play the cancelled part on the keyboard
yourself. play on its keyboard. The local control setting lets you do just
that.
1. Press bn to select the channel setting you want
to turn off.
1. Press ct and then use the bs (10-key) [4] (o)
and [6] (p) keys to display “MIDI” (page E-6).
Each press of bn cycles through settings (1) thorough (4)
described below.
• If you turn off one channel, you can play the cancelled
2. Press bs (10-key) [7] (ENTER) key.
part on the keyboard using the same tone as the
channel you turned off. If you turn off both channels
3. Use the bs (10-key) [4] (o) and [6] (p) keys
(option (3)), what you play on the keyboard sounds to display “Local”.
using the tone of the navigate (R) channel.
A c ompOu t
4. Use the bs (10-key) [–] and [+] keys to turn
Accomp Out on or off.
E-61
Connecting External Devices
E-62
Connecting External Devices
English
available stereo, amplifier, or recording equipment, to a Connection requires commercially available connecting cords,
portable audio player or other equipment. supplied by you. The connecting cords should have a stereo
mini plug on one end and a plug that matches the
configuration of the external device on the other end.
Outputting Keyboard Notes to Audio
Equipment
Connection requires commercially available connecting cords, • Turn off the Digital Keyboard when making
supplied by you. connections. After connecting, turn down the Digital
Keyboard and external device volume levels whenever
turning power on or off.
• After connecting, turn on the external device and then
• Turn off the external device when making connections.
After connecting, turn down the Digital Keyboard and the Digital Keyboard.
• If notes are distorted when they are sounded on the
external device volume levels whenever turning power
external device, lower the volume setting of the
on or off.
• After connecting, turn on the Digital Keyboard and then external device.
the external device. Digital Keyboard AUDIO IN jack
• If keyboard notes sound distorted when they are
sounded from external audio equipment, lower the
Digital Keyboard’s volume setting.
Portable audio player, etc.
Digital Keyboard PHONES/OUTPUT jack
E-63
Reference
Troubleshooting
Symptom Action
Included Accessories
I can’t find something that should be here. Carefully check inside all of the packing materials.
Power Requirements
Power will not turned on. • Check the AC adaptor or make sure that the batteries are facing
correctly (page E-8).
• Replace the batteries with new ones or switch over to AC adaptor
power (page E-8).
The Digital Keyboard outputs a loud sound and then Replace the batteries with new ones or switch over to AC adaptor
suddenly powers down. power (page E-8).
The Digital Keyboard suddenly powers down after a This happens when Auto Power Off (page E-9) is triggered.
few minutes.
Display
The display keeps going out or are flashing. Replace the batteries with new ones or switch over to AC adaptor
power (page E-8).
On-screen keyboard keys or notes remain on the A Step Up Lesson is in progress and the Digital Keyboard is waiting for
display. you to play the next note in the song. To stop this from happening,
cancel the lesson (page E-33).
Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.
Sound
Nothing happens when I press any keyboard key. • Adjust the main volume setting (page E-9).
• Check if something is plugged into ek (PHONES/OUTPUT jack) on
the back of the Digital Keyboard.
• If there is no sampled sound in memory, nothing will play if you press
a keyboard key while a tone in the range of 571 to 578 is selected
(page E-20).
• Turn power off and then back on to initialize all keyboard settings
(page E-9).
Nothing happens or notes do not play normally when Press bn to disable chord input in the accompaniment keyboard area
I play notes on the left side of the keyboard. (page E-39).
Nothing happens when I start an Auto • With rhythms 170, and 172 to 180, nothing will sound until you play a
Accompaniment. chord on the keyboard. Try playing a chord (page E-39).
• Check and adjust the accompaniment volume setting (page E-42).
• If there is no user rhythm stored in memory, Auto Accompaniment
will not start when you press bm while a rhythm in the range of 181 to
190 is selected (page E-44).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-9).
Nothing happens when I start playback of a built-in • It takes a little time after you press the button until the song starts to
song. play. Wait for a moment for the song to start.
• Check and adjust the song volume (page E-30).
• If there is no user song stored in memory, song playback will not
start when you press bm while a song in the range of 153 to 162 is
selected (page E-30).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-9).
The metronome does not sound. • Check and adjust the accompaniment volume setting (page E-42).
• Check and adjust the song volume (page E-30).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-9).
E-64
Reference
Symptom Action
Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Keyboard
English
settings (page E-9).
• Replace the batteries with new ones or switch over to AC adaptor
power (page E-8).
Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones). This
does not indicate malfunction. See “Maximum Polyphony” in the “Tone
List” in the separate “Appendix”.
The volume or tone setting I made has changed. • Adjust the main volume setting (page E-9).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-9).
• Replace the batteries with new ones or switch over to AC adaptor
power (page E-8).
Output volume does not change even though is • Change the Touch Response setting (page E-10).
change my keyboard touch. • Turn power off and then back on to initialize all Digital Keyboard
settings (page E-9).
In certain keyboard ranges, the volume and tone This is due to system limitations. It does not indicate malfunction.
quality sound are slightly different from those in other
keyboard ranges.
With some tones, octaves do not change at the far This is due to system limitations. It does not indicate malfunction.
ends of the keyboard.
The pitch of the notes does not match other • Check and adjust the transpose (page E-17) and tuning settings
accompanying instruments or sounds strange when (page E-17).
played long with other instruments. • Turn power off and then back on to initialize all Digital Keyboard
settings (page E-9).
The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page E-16).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-9).
Operation
When I perform a skip forward or skip back While song playback is stopped or a Step Up Lesson is in progress,
operation, the skip operation moves multiple song skip forward and skip back operations are performed in phrase units
measures instead of only a single measure. (page E-28).
Tone, rhythm, and other settings revert to their initial Though Digital Keyboard settings reset when you turn off the Digital
defaults whenever you turn on the Digital Keyboard. Keyboard, you can save setups to registration memory for instant recall
whenever you need them (page E-48).
Computer Connection
I can’t exchange data between the Digital Keyboard • Check to make sure that the USB cable is connected to the Digital
and a computer. Keyboard and computer, and that the device is selected correctly
with your computer’s music software settings (page E-59).
• Turn off the Digital Keyboard and then exit the music software on
your computer. Next, turn the Digital Keyboard back on and then
restart the music software on your computer.
E-65
Reference
Specifications
Model WK-210
Keyboard 76 standard-size keys
Touch Response 2 types, Off
Maximum Polyphony 48 notes (24 for certain tones)
Tones
Built-in Tones 570
Sampling Tones Up to 8 (Melody Sampling: 5, Drum Sampling: 3)*
Up to 10 seconds
Functions Layer, Split
Reverb 1 to 10, Off
Chorus 1 to 5, Off
Voice Pad 5 pads × 4 sets
(3 sets for sampled sounds, 1 set for percussion only)
Metronome
Beats per Measure 0, 2 to 6
Tempo Range 30 to 255
Song Bank
Built-in Songs 152
User Songs Up to 10*
Step Up Lesson
Lessons 4 (Listen, Watch, Remember, Auto)
Lesson Part L, R, LR
Functions Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation
Music Challenge 20 notes
Auto Accompaniment
Built-in Rhythms 180
User Rhythms Up to 10 (Accompaniment Edit)*
Registration 32 (4 setups × 8 banks)
Recorder Real-time recording, playback
Keyboard Play 5 songs, 6 tracks
Playing Along with a
Built-in Songs 1 song (L, R, LR)
Memory Capacity Approximately 12,000 notes (total for 6 songs)
Other Functions
Transpose ±1 octaves (–12 to +12 semitones)
Octave Shift Upper/Lower ±2 octaves
Tuning A4 = approx. 440 Hz ±100 cents
Preset Scales 17
Music Preset 305
One Touch Preset 180
Auto Harmonize 12 types
Arpeggiator 90 types
MIDI 16 multi-timbre received, GM Level 1 standard
Musical Information Function Tone, Rhythm, Song Bank, numbers and names; staff notation, fingering, pedal operation,
tempo, measure and beat number, chord name, etc.
E-66
Reference
Inputs/Outputs
USB port TYPE B
Sustain/Assignable jack Standard jack (sustain, sostenuto, soft, rhythm start/stop)
English
Phones/Output jack Stereo standard jack
Output Impedance: 200Ω, Output Voltage: 4.5V (RMS) MAX
Audio In jack Stereo mini jack
Input Impedance: 9kΩ, Input Sensitivity: 200mV
Mic In jack Standard jack
Input Impedance: 3kΩ, Input Sensitivity: 10mV
Power Jack 9V DC
Power Supply 2-way
Batteries 6 D-size zinc-carbon batteries or alkaline batteries
Battery Life Approximately 5 hours continuous operation on zinc-carbon batteries
AC Adaptor AD-5
Auto Power Off Approximately 6 minutes after last key operation (Operates during battery use only)
Speakers 12cm × 2 (Output: 2.5W + 2.5W)
Power Consumption 9V = 7.7W
Dimensions 118.7 × 40.0 × 15.5 cm (46 3/4 × 15 3/4 × 6 1/8 inch)
Weight Approximately 7.2kg (15.9 lbs) (without batteries)
Operating Precautions
Be sure to read and observe the following operating precautions.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the product, but interference from the product can cause audio or video
interference of a nearby device.
■ User Maintenance
• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.
Wring all excess moisture from the cloth before wiping.
■ Weld Lines
Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not
cracks or scratches.
E-67
Reference
Error Messages
Display
Cause Action
Message
Err Exist A sampled drum set sound cannot be copied (page • Delete the sampled sound that is currently assigned
E-23) to a keyboard key because the key already has to the key you are copying to (page E-24).
a sampled sound assigned to it. • Copy the sampled sound to another key that does not
yet have a sampled sound assigned to it.
Err Limit The tone number you selected before starting • Delete the one or more of the sampled sounds
sampling already has the allowable maximum of eight currently assigned to the tone number (page E-24).
sampled sounds assigned to it. • Select another tone number that has less than eight
sampled sounds currently assigned to it (page E-22).
Err Mem Full There is not enough memory available for sampling or Delete some or all of the following user data from
Auto Accompaniment editing. memory to make room for new data.
Sampled sounds (page E-19), user rhythms (page
E-44), user songs (page E-30)
Err No Data There is no data in the selected user area (tone, Select a Digital Keyboard user area that contains data.
rhythm, song number, etc.)
Err Protect Sampled sounds are protected. Unprotect one or more of the sampled sounds, which will
allow it to be overwritten or deleted.
Err SizeOver Auto Accompaniment editing cannot be performed Select a different accompaniment pattern or instrument
because the accompaniment pattern or instrument parts.
part data is too large.
E-68
Reference
Song List
English
SONG BANK
E-69
Chord Example List
E-70
Root
Chord C C#/(Db) D (D#)/Eb E F F#/(Gb) G (G#)/Ab A (A#)/Bb B
Type
Reference
dim
aug
sus4
sus2
m7
M7
m7b5
7b5
7sus4
add9
madd9
mM7
dim7
69
m6
• Since the chord input range is limited, this model may not support some of the chords shown above.
Model: WK-210 Version : 1.0
Basic Default 1 1 - 16
Channel Changed 1 - 16 1 - 16
After Key’s X X
Touch Ch’s X O
Pitch Bender X O
System Exclusive O *4 O *5 *6
System : Clock O X
Real Time : Commands O X