Professional Documents
Culture Documents
en-GB
Fitting instructions
© by Doka GmbH, A-3300 Amstetten
e
d STOP
f
c
9432-101
WARNING
➤ Use Doka coils 16mm only with the Doka
express anchor 16x125mm.
➤ Never use Doka coils 16mm on normal
standard screws or anchors.
➤ Screw the Doka coil 16mm onto the Doka
express anchor 16x125mm only in the direc-
tion indicated. Do not pre-spread.
➤ The express anchor may only be re-used
after performing a check for wear with the
Gauge for Doka express anchor
16x125mm, and provided that this check
has been successfully passed.
e B
f
B5.1 B5.2
! B4.2 B6.1
A1 A5
! B6.2
9432-101
2 999432002 - 11/2017
Fitting instructions Doka Express anchor 16x125mm
Structural design
Permissible values of temporary Permissible values of back-stays on
fixing points in uncracked concrete ring (values apply to uncracked
concrete)
F
F
c
9432-207-18
c
c ... max. thickness of attached part 15 mm
9432-207-18
14
12 NOTICE
10 If the ring is damaged (deformed), it is not per-
8 mitted to use this back-stay!
6
4
2
A B C D E
0
0 5 10 15 20 25 30 35 40
Boundary conditions
s c
hef
9432-206-01
hmin
NOTICE
If the boundary conditions differ from those
stated above, the approval Z-21.8-2033 must
be used!
999432002 - 11/2017 3