This document provides instructions for installing and configuring a DHCP server on a Windows server. It involves adding the DHCP server role using server manager, authorizing the server in Active Directory, and creating a new DHCP scope to assign IP addresses to clients. The configuration of DHCP clients is also covered, showing how to configure Windows 10 networking to obtain an IP address from the DHCP server.
This document provides instructions for installing and configuring a DHCP server on a Windows server. It involves adding the DHCP server role using server manager, authorizing the server in Active Directory, and creating a new DHCP scope to assign IP addresses to clients. The configuration of DHCP clients is also covered, showing how to configure Windows 10 networking to obtain an IP address from the DHCP server.
This document provides instructions for installing and configuring a DHCP server on a Windows server. It involves adding the DHCP server role using server manager, authorizing the server in Active Directory, and creating a new DHCP scope to assign IP addresses to clients. The configuration of DHCP clients is also covered, showing how to configure Windows 10 networking to obtain an IP address from the DHCP server.
Before settings DHCP, Configure AD DS in your LAN and make the DHCP Host join the [1] Domain first. [2] Run Server Manager and Click [Add roles and features].
[3] Click [Next] button.
[4] Select [Role-based or feature-based installation]. [5] Select a Host which you'd like to add services. [6] Check a box [DHCP Server]. [7] Addtional features are required to add DHCP Server. Click [Add Features] button. [8] Click [Next] button. [9] Click [Next] button. [10] Click [Next] button. [11] Click [Install] button. [12] After finishing Installation, click [Close] button. DHCP Server : Configure 2017/01/17
Configure installed DHCP Server.
[1] Run Server Manager and Click [DHCP] on the left menu.
[2] Click [More...] link which is upper-right.
[3] Click [Complete DHCP configuration] link which is upper-right. [4] Click [Next] button. [5] Specify the credencials to authorize this DHCP Server in AD DS and click [Commit] button. [6] After successing authorization normally, click [Close] button. [7] Back to Server Manager and open [Tools] - [DHCP]. [8] Right-Click [IPv4] on the left pane and select [New Scope...]. [9] Click [Next] button. [10] Input any name and decsription for this scope. [11] Define IP address range. If you'd like to exclude specific IP address from the range set in previous section, [12] Configure it on here. [13] Define lease duration. [14] Click [Next] button. [15] Define default gateway of your network. [16] Define domain name and DNS server of your network. [17] Define WINS Server. It's OK to keep empty here if you don't need it. [18] Click [Next] button. [19] Click [Finish] button to complete configuration. [20] New DHCP scope has beed added. DHCP Server : Configure DHCP Client
Configure DHCP Client. This example is based on Windows 10.
[1] Open Network settings and click [Properties] button.
[2] Open [IPv4] Properties and set like follows to assign IP address from DHCP server. [3] After re-configuration of networking, IP address is assigned from DHCP Server.