Professional Documents
Culture Documents
• M-TS support
• IO Module support
• New IO Modules
• Authoring tools for IO Modules
• HTTPS and WSS support
• MALC mapping enhancements
• Fixture templates
• DALI RGB
• Intensity-only fixtures on MALC
• New Patch UI
• Real time timelines
• Waypoint timelines
• New timeline presets
• Arabic & Greek character support in text preset
• Lasso select on Timeline
• Gradient generator & tools for presets
• More timecode buses
• Video black level
• Live video trigger
• Disable Output action
• Searchable trigger type pickers
• Install replication
• Single edit for digital and analog ports
• Live video monitor
Notable changes
Version 2.4.0
Known issues
• Controllers not shown in Network after interface change
• Designer must be restarted to register a new connection to an MSC over USB
• MSC X and MALC playback starts seconds before data network comes up
• Audio in Simulate doesn't support reduced playback rate
• Changing fixture type fails with different element counts
• Intermittent MALC playback crash after approx. 7 days
• Wake on proximity detection disabled for MTPC and M-TS while a power issue is investigated
• Timeline driven from timecode causes M-TS to crash
Compatibility
• All Unison Mosaic controllers and remote devices may be upgraded to version 2 firmware with the Mosaic Project Upgrade Tool (and back to version 1
firmware if required) except the following:
o MSC units with serial numbers between 001001 and 005xxx are not compatible with Mosaic Designer 2. Please continue to use Mosaic
Designer v1.x with these units. Note that this will only affect MSCs manufactured in 2010 or earlier - the original model with the expansion
port at one end
o The AVC is not supported in Mosaic Designer 2
• Project files created in Mosaic Designer version 1 can be converted to the new version 2 format with the Mosaic Project Upgrade Tool.
• MSC connections via USB require a driver. This is installed from within the Mosaic Designer Windows installer and from the Utilities folder of the Mac
OS X application bundle.
• There are a small number of things that are never going to be supported in Mosaic Designer 2. Projects affected by any of the items below should
consider staying on version 1:
• ETC Net2 is no longer supported
• Mac OS X 10.7.x and earlier is not supported
Bug fixes
Version 2.4.2
Version 2.4.1
Version 2.4.1 RC 2
Version 2.4.1 RC 1
Version 2.4.0
• 1545 - Dimensions shown for pixel matrix selected for MSC X DVI output don't update when pixel matrix size is changed
• 4349 - No mention of RIO IP addresses in Help
• 4391 - Art-Net discovery from Designer reboots controller
Version 2.4.0 RC 4
• 4292 - Crash when adding preset to a MALC after deleting and then adding a new MALC
• 4375 - Fixture library errors reported for some fixtures from online fixture library
• 4377 - Composition cannot be selected for presets on MALC or MALC Pro timeline rows
• 4380 - Crash when deleting a timeline with scene programming
Version 2.4.0 RC 3
• 4273 - Controller not unlinked from replicant (remains purple) if unlinked by changing universe count
• 4354 - Some DALI groups hidden at minimum window size
• 4359 - Crash on Save As
• 4365 - Controller serial number is not released when changing capacity
• 4366 - Digital Input trigger field changes do not update summary immediately
• 4368 - Crash upon patching multi-patchpoint fixture template with insufficient space on patch grid
• 4369 - Knockout from scenes doesn't simulate correctly on plan
Version 2.4.0 RC 2
Version 2.4.0 RC 1
• 2735 - Show 'Auto-detect' in preferences if user's preferred OpenCL device isn't found
• 3316 - Capture Card firmware files not deleted after a MSC X/MALC recovery
• 3350 - Crash when dragging patch records
• 3397 - Font size of Text preset on MALC Pro overlay doesn't update properly
• 3429 - Web interface doesn't reload after controller firmware reload
• 3725 - Button configuration settings do not work on the BPI
• 3786 - MIDI message builder shouldn't show variable UI unless feature is enabled
• 3883 - Timeline conditions and actions should default to only timeline in project
• 3898 - Live video preset appearing when no suitable controller in the project
• 3903 - Allow conditions to be tested on another controller
• 3905 - When connected via USB controller configuration shows ethernet over USB IP address
• 3955 - Band in audio timeline properties is an empty combo box
• 3991 - Pasting an interface control that was on a deleted page can crash
• 3995 - Show an issue if a font for a text preset has no character ranges set
• 4022 - Logging empty strings doesn't add new line
• 4034 - Indicate old and new firmware versions when reloading firmware
• 4035 - Hide trigger, condition and action 'controller' settings with in-place enabled Designer project feature
• 4058 - IO module creator doesn't allow IP address editor to be set for property type IP address
• 4080 - A serial number can be assigned to multiple controllers
• 4092 - Programming on fixture (rather than group) doesn't output on controller when patched afterwards
• 1126 - Mixture of copying & deleting (and undoing) fixture causes crash
• 1140 - Dynamic text slot special character validation
• 1937 - Deleting the controller that patch is focused on doesn't revert to the other controller
• 2463 - Moving a single patch record of a fixture will reselect all patch records for that fixture
• 2848 - Add a pixel matrix when importing a Color Kinetics VMT config and patching to an MSC
• 3175 - Add more tools for gradient workflow
• 3483 - Two finger zoom gesture does not work on OS X
• 3553 - Default property editors incorrectly initialised in Theme Editor
• 3609 - Allow configuration of all controller, TPC-RIO and RIO digital/analog IO at once
• 3626 - Wizards should appear in the centre of the current monitor
• 3644 - Small font size in Timeline view on OS X for time bar and preset names
• 3654 - Show a toolbar that allows navigation between the patch records of the selected fixture
• 3673 - VMT import onto non-VLC layout should create fixtures of size 4x4 and scale layout
• 3681 - MIDI short message values only update when spin box loses focus
• 3715 - Patch summary tooltips on layout don't show controller name
• 3717 - Archive exception when attempting to delete TPC interface
• 3724 - Media preset preview not updated if media clip is replaced
• 3754 - Media duration is incorrectly reported
• 3765 - Opening Interface or DALI view marks project as dirty
• 3785 - Trigger variable feature is disabled even if used by a pre-2.3 project
• 3817 - Allow release all action to filter by group while also choosing timelines or scenes
• 3822 - Timeline position is not updating on the Project Status web interface page when using timecode