You are on page 1of 1

STRUT Structural member subjected to an axial compressive load is……

COLUMN vertical strut is known as………

RECTANGULAR middle third rule is valid for…………….section

LINEAR the load deflection graph for a spring is……….

PROOF a load applied at the centre of a carriage spring to straighten all its leaves is known as……….. load.

AUTOMOBILES Leaf spring is commonly used in case of…..

FLATSPIRAL The spring used in mechanical watches is…………….spring.

BENDING The leaf spring are subjected to…………..stress.

TWISTING the effect of an axial tensile force on a helical spring…….

DOUBLE the critical load for a long column with both ends fixed is……………………than that of a column
one end fixed and other end hinged.

CORE the zone in a short column section within which a compressive load applied parallel to axis will
produce no tension is called…………

BUCKLE the critical load is the load at which the column……….

INSTABILITY failure of column occurs due to…………

HALF when two equal springs are jointed in series the stiffness for the new spring is………….

ENERGY modulus of resilience is the maximum…………stored per unit volume of the material.

You might also like