Professional Documents
Culture Documents
Co-Ordinate Measuring Machine (CMM) : Ue Press Tools PVT LTD
Co-Ordinate Measuring Machine (CMM) : Ue Press Tools PVT LTD
1.Switch ON the Air compressor and Air Dryer, then check Air pressure 2.Clean the surface table and machine. CMM machine should be free
3.Next Switch ON the m
(to be maintain 5 - 6 bar). from dust particles.
4.Change the index angle to A0 B0 and move the Probe head to home 5.Identify the part/component and select the probe accordingly. 6.Next take the relevant
position. Calibrate the probe before checking the component. Angle block and cl
8.After completing the checking process save the report in a
7.Select the correct program for the part and run the program. 9.And switch OFF t
desired place and close the software.