Professional Documents
Culture Documents
In chemistry, the emphasis is on bonding structure in molecules or ions and the coordination
number of an atom is determined by simply counting the other atoms to which it is bonded (by
either single or multiple bonds). For example, [Cr(NH3)2Cl2Br2]1- has Cr3+ as its central cation,
which has a coordination number of 6.
However the solid-state structures of crystals often have less clearly defined bonds, so a simpler
model is used, in which the atoms are represented by touching spheres. In this model the
coordination number of an atom is the number of other atoms that it touches. For an atom in the
interior of a crystal lattice, the number of atoms touching the given atom is the bulk
coordination number; for an atom at a surface of a crystal, this is the surface coordination
number.
The total number of points of attachment to the central element is termed the coordination number and
this can vary from 2 to as many as 16, but is usually 6. In simple terms, the coordination number of a
complex is influenced by the relative sizes of the metal ion and the ligands and by electronic factors, such
as charge which is dependent on the electronic configuration of the metal ion. These competing effects
are described by the term ionic potential which is defined as the charge to radius ratio (q/r).
Based on this, it can be seen that the bigger the charge on the central ion, the more attraction there will be
for negatively charged ligands, however at the same time, the bigger the charge the smaller the ion
becomes which then limits the number of groups able to coordinate.
Coordination Number 1
Transition metal complexes with the coordination number 1 are rare. In the case of main group
elements this coordination number is more common, e.g. in HF, ICl. It can be also observed in the gas
phase. Some of the examples known are the copper(I) complex shown here and the analogous Ag(I)
complex made by Strähle et al. They used the bulky 2,4,6-(triphenyl)phenyl ligand to prevent
aggregation of the molecules
Coordination Number 2
This arrangement is not very common for first row transition metal ion complexes and some of the best
known examples are for Silver(I). In this case we have a low charge and an ion at the right hand side of
the d-block indicating smaller size
As in the case of C.N.1 , compounds with the coordination number 2 are very common for main group
elements but are less common for transition metal complexes. Two gometry types are possible: Linear
and bent.
-Linear
This first possibility includes examples in main group chemistry that have this geometry due to the
electron pair configuration:
- Bent
Coordination Number 3
The coordination number 3 is also relatively rare for transition metals. It occus in the case of d10
complexes and when bulky ligands are present. Most transition metal examples are trigonal planar,
some with a slight tendancy for pyramidalization.
Trigonal planar
Well known for main group species like CO32- etc., this geometry has the four atoms in a plane with the
bond angles between the ligands at 120 degrees.
The following structures represent examples for trigonal planar geometries.Main group geometries with 3
bonding electron pairs are trigonal planar
[Cu(CN)3]2-
Trigonal pyramid
T-shaped
The first example of a rare T-shaped molecule was found in 1977 however since then several further
examples have been reported.
T-shaped
The T-shaped geometry is only observed for hypervalent main group elements in compounds such as
iodine trichloride, chlorine trifluoride etc.
Coordination Number 4
Two different geometries are possible. The tetrahedron is the more common while the square planar is
found almost exclusively with metal ions having a d8 electronic configuration.
Tetrahedral
Typically, oxoanions like permanganate (MnO4-) and other compounds with metal-
oxygen or metal nitrogen multiple bonds (e.g. OsO4) have tetrahedral geometries.
Another class of compounds are the halo-anions of Ni(II), Co(II), Cu(II) and
Fe(II)/Fe(III).
Methane FeCl4-
Cu(bipy)4+ OsO2(NtBu)2
-Square Planar
The square planar rearrangement is preferred for d8 electron complexes of the second
and third row and sometimes 1st row, e.g. Au(III), Pt(II), Ir(I). Sometimes the square
planar eometry can be distorted, as in the Pd complex shown on the right below, due to
steric demand of the ligands.
Tetrahedral, (Td)
The chemistry of molecules centred around a tetrahedral C atom is covered in organic courses. To be
politically correct, please change all occurrences of C to Co. There are large numbers of tetrahedral
Cobalt(II) complexes known.
e.g CoCl2pyr2
These are much less common than tetrahedral and are included only because some extremely important
molecules exist with this shape. cisplatin - cis-PtCl2(NH3)2.
The cis- isomer is a powerful anti-cancer drug whereas the trans- is inactive.
Coordination Number 5
For coordination number 5, there are 2 basic geometries, trigonal bipyramidal and square pyramidal,
and distorted versions thereof. Main group compounds mostly prefer the trigonal bipyramidal
geometry. It is difficult to predict for the transition metals which structure a compoundwill adopt. Since
the two structure types are only slightly different in energy, in many cases, for the same molecule or ion,
depending on the conditions (packing in the solid state or counterion), both geometries can be seen.
The anion [Ni(CN)5]3- can be seen in the same crystal, adopting both geometries. This is due to the
stereochemical nonrigidity of the structures.
Trigonal Bipyramidal
Compounds like iron pentacarbonyl (Fe(CO)5) and PF5 adopt the trigonal bipyramidal geometries. If all
the ligands are the same, the point group for trigonal bipyramical structures is D3h. In trigonal biyramidal
structures, there are 2 positions for the ligands, 2 axial and 3 equatorial positions.
The structure of [Cr(en)3][Ni(CN)5] 1.5 H2O was reported in 1968 to be a remarkable example of a
complex exhibiting both types of geometry in the same crystal.
The reaction of cyanide ion with Ni2+ proceeds via several steps:
Ni2+ + 2 CN- → Ni(CN)2
log(β4) = 30.1
Coordination Number 6
Hexagonal planar
Unknown for first row transition metal ions, although the arrangement of six groups in a plane is found in
some higher coordination number geometries.
Trigonal prism
Most trigonal prismatic compounds have three bidentate ligands such as dithiolates or oxalates and few
are known for first row transition metal ions.
tris(cis-1,2-diphenylethene-1,2-dithiolato)rhenium
Trigonal Prismatic
The trigonal prismatic structure is only rarely adopted. The few examples known include hexamethyl
complexes with d0 configuration, such as hexamethyltungsten and [Zr(CH3)6]2-.
Octahedral, (Oh)
The most common geometry found for first row transition metal ions, including all aqua ions.
In some cases distortions are observed and these can sometimes be explained in terms of the Jahn-Teller
Theorem. [CoCO3(NH3)5]+
Octahedral
In case of 6 monoatomic ligands, an undistorted octahedron also has the high octahedral symmetry and
belongs to the point group Oh.
Coordination Number 7
Three geometries are possible:
Not very common for 1st row complexes and the energy difference between the structures seems small
and distortions occur so that prediction of the closest "idealised" shape is generally difficult.
Capped Octahedral
In case of 6 monoatomic ligands, an undistorted octahedron also has the high octahedral symmetry and
belongs to the point group Oh.
The trigonal prismatic structure is only rarely adopted. The few examples known include hexamethyl
complexes with d0 configuration, such as hexamethyltungsten and [Zr(CH3)6]2-. Like all capped
structures, in this case the base of the structure is a known polyhedron. The additional ligand is added on
top of a face of the trigonal prism. Slight distortions can occur to accomodate the additional ligand, which
is shown in blue in the following picture.
Pentagonal Bipyramid, (D5h) e.g bis-(tert-butylacac)2(DMSO)di-oxoUranium
Pentagonal Bipyramidal
There are 2 different ligand positions in this structure, 2 axial and 5 equatorial positions. This structure
type is adopted in many cases, where there is a macrocyclic pentadentate ligand, that occupies the
equatorial positions.
Coordination Number 8
For eight-coordination, there are 3 main structure types, two of which are preferred for molecules. The
Cubic structure, the Square Antiprism andthe Dodecahedron.
There are several ways to construct a dodecahedron. One method empoys two trapezoids that are
perpendicular to each other in space. The other possibility is to imagine the polyhedron composed of two
....
Cube, (Oh)
Cubic
The cubic coordination is is observed for ionic compounds because of steric reasons, it is not realized for
molecular structures. A prime example is the structure of CsCl.
Square antiprism, (D4d) e.g U(acac)4
The square antiprism can be derived from a cube by trurning one of the faces with respect to the opposite
face.
Coordination Number 9
Three-face centred trigonal prism, (D3h) e.g Hydrated salts of the lanthanide elements eg Eu(H2O)9]3+
This structure type is very common for the nine-coordinate geometry. One historically important example
is the ReH92- ion
Coordination Number 10
Coordination Number 11
Coordination Number 12