Professional Documents
Culture Documents
BC556B, BC557A, B, C, BC558B Amplifier Transistors: PNP Silicon
BC556B, BC557A, B, C, BC558B Amplifier Transistors: PNP Silicon
BC558B
Amplifier Transistors
PNP Silicon
Features http://onsemi.com
MAXIMUM RATINGS 2
BASE
Rating Symbol Value Unit
Collector - Emitter Voltage VCEO Vdc
BC556 −65 3
BC557 −45 EMITTER
BC558 −30
Collector - Base Voltage VCBO Vdc
BC556 −80
BC557 −50
BC558 −30
TO−92
Emitter - Base Voltage VEBO −5.0 Vdc CASE 29
STYLE 17
Collector Current − Continuous IC −100 mAdc
Collector Current − Peak ICM −200
12 1
Base Current − Peak IBM −200 mAdc 2
3 3
Total Device Dissipation @ TA = 25°C PD 625 mW STRAIGHT LEAD BENT LEAD
Derate above 25°C 5.0 mW/°C BULK PACK TAPE & REEL
AMMO PACK
Total Device Dissipation @ TC = 25°C PD 1.5 W
Derate above 25°C 12 mW/°C
MARKING DIAGRAM
Operating and Storage Junction TJ, Tstg −55 to +150 °C
Temperature Range
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit BC
55xx
Thermal Resistance, Junction−to−Ambient RqJA 200 °C/W
AYWW G
Thermal Resistance, Junction−to−Case RqJC 83.3 °C/W G
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
http://onsemi.com
2
BC556B, BC557A, B, C, BC558B
BC557/BC558
2.0 −1.0
TA = 25°C
hFE , NORMALIZED DC CURRENT GAIN
V, VOLTAGE (VOLTS)
1.0 −0.7
−0.6 VBE(on) @ VCE = −10 V
0.7
−0.5
0.5 −0.4
−0.3
0.3 −0.2
−0.1 VCE(sat) @ IC/IB = 10
0.2 0
−0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200 −0.1 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100
IC, COLLECTOR CURRENT (mAdc) IC, COLLECTOR CURRENT (mAdc)
−2.0 1.0
VCE , COLLECTOR−EMITTER VOLTAGE (V)
1.6
−1.2
2.0
IC = IC = −50 mA IC = −200 mA
−0.8
−10 mA
2.4
IC = −100 mA
IC = −20 mA
−0.4
2.8
0
−0.02 −0.1 −1.0 −10 −20 −0.2 −1.0 −10 −100
IB, BASE CURRENT (mA) IC, COLLECTOR CURRENT (mA)
10 400
Cib 300
7.0
TA = 25°C 200
C, CAPACITANCE (pF)
1.0 20
f,
−0.4 −0.6 −1.0 −2.0 −4.0 −6.0 −10 −20 −30 −40 −0.5 −1.0 −2.0 −3.0 −5.0 −10 −20 −30 −50
VR, REVERSE VOLTAGE (VOLTS) IC, COLLECTOR CURRENT (mAdc)
http://onsemi.com
3
BC556B, BC557A, B, C, BC558B
BC556
−1.0
hFE , DC CURRENT GAIN (NORMALIZED)
TJ = 25°C
VCE = −5.0 V
TA = 25°C −0.8
VBE(sat) @ IC/IB = 10
V, VOLTAGE (VOLTS)
2.0
−0.6
VBE @ VCE = −5.0 V
1.0
−0.4
0.5
−0.2
0.2 VCE(sat) @ IC/IB = 10
0
−0.1 −0.2 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200
IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA)
−2.0 −1.0
−0.4 −2.6
TJ = 25°C
0 −3.0
−0.02 −0.05 −0.1 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200
IB, BASE CURRENT (mA) IC, COLLECTOR CURRENT (mA)
40
T CURRENT−GAIN − BANDWIDTH PRODUCT
VCE = −5.0 V
TJ = 25°C 500
20 Cib
C, CAPACITANCE (pF)
200
10 100
8.0
6.0 50
Cob
4.0
20
f,
2.0
−0.1 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 −1.0 −10 −100
VR, REVERSE VOLTAGE (VOLTS) IC, COLLECTOR CURRENT (mA)
http://onsemi.com
4
BC556B, BC557A, B, C, BC558B
1.0
0.7
D = 0.5
0.5
RESISTANCE (NORMALIZED)
0.2
r(t), TRANSIENT THERMAL
0.3
0.2 SINGLE PULSE
0.05 ZqJC(t) = (t) RqJC
0.1
0.1 RqJC = 83.3°C/W MAX
P(pk)
SINGLE PULSE ZqJA(t) = r(t) RqJA
0.07
RqJA = 200°C/W MAX
0.05 t1
D CURVES APPLY FOR POWER
0.03 t2 PULSE TRAIN SHOWN
DUTY CYCLE, D = t1/t2 READ TIME AT t1
0.02
TJ(pk) − TC = P(pk) RqJC(t)
0.01
0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1.0k 2.0k 5.0k 10
t, TIME (ms)
−200
1s 3 ms
IC, COLLECTOR CURRENT (mA)
−100
The safe operating area curves indicate IC−VCE limits of the
TA = 25°C TJ = 25°C transistor that must be observed for reliable operation. Collector
−50
load lines for specific circuits must fall below the limits indicated by
the applicable curve.
The data of Figure 14 is based upon TJ(pk) = 150°C; TC or TA is
BC558 variable depending upon conditions. Pulse curves are valid for
BC557 duty cycles to 10% provided T J(pk) ≤ 150°C. TJ(pk) may be
−10
BC556 calculated from the data in Figure 13. At high case or ambient
−5.0 temperatures, thermal limitations will reduce the power than can
BONDING WIRE LIMIT
be handled to values less than the limitations imposed by second
THERMAL LIMIT
breakdown.
SECOND BREAKDOWN LIMIT
−2.0
−1.0 −5.0 −10 −30 −45 −65 −100
VCE, COLLECTOR−EMITTER VOLTAGE (V)
http://onsemi.com
5
BC556B, BC557A, B, C, BC558B
ORDERING INFORMATION
Device Package Shipping†
BC556BG TO−92 5000 Units / Bulk
(Pb−Free)
BC557BZL1G TO−92
2000 / Ammo Box
(Pb−Free)
http://onsemi.com
6
BC556B, BC557A, B, C, BC558B
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AM
NOTES:
A B STRAIGHT LEAD 1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
BULK PACK 2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
P BEYOND DIMENSION K MINIMUM.
L
SEATING INCHES MILLIMETERS
PLANE K DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.20
B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
D 0.016 0.021 0.407 0.533
D G 0.045 0.055 1.15 1.39
X X
H 0.095 0.105 2.42 2.66
G J 0.015 0.020 0.39 0.50
H J K 0.500 −−− 12.70 −−−
L 0.250 −−− 6.35 −−−
V C N 0.080 0.105 2.04 2.66
P −−− 0.100 −−− 2.54
SECTION X−X R 0.115 −−− 2.93 −−−
1 N V 0.135 −−− 3.43 −−−
NOTES:
A B BENT LEAD 1. DIMENSIONING AND TOLERANCING PER
R
TAPE & REEL ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
AMMO PACK 3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
P AND BEYOND DIMENSION K MINIMUM.
T
SEATING MILLIMETERS
PLANE K
DIM MIN MAX
A 4.45 5.20
B 4.32 5.33
C 3.18 4.19
D D 0.40 0.54
X X G 2.40 2.80
G J 0.39 0.50
J K 12.70 −−−
N 2.04 2.66
V P 1.50 4.00
C
R 2.93 −−−
SECTION X−X V 3.43 −−−
1 N
STYLE 17:
PIN 1. COLLECTOR
2. BASE
3. EMITTER
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com BC556B/D
7