Professional Documents
Culture Documents
Automobile Steel
The 3rd International Conference on
High Manganese Steels
Chengdu, China
Technical Program
Organized by
The Chinese Society for Metals
Central Iron and Steel Research Institute
Co-organized by
The Korean Institute of Metals and Materials
Baosteel Group Corporation
Shanghai University
Supported by
CBMM-CITIC
Organizers/Committees
Organized by
The Chinese Society for Metals
Co-organized by
The Korean Institute of Metals and Materials
Shanghai University
Supported by
CBMM-CITIC
Conference Chairman
WENG Yuqing (The Chinese Society for Metals), China
Conference Secretary-General
ZHAO Pei (The Chinese Society for Metals), China
Technical Committee
Chairmen
DONG Han (Central Iron and Steel Research Institute / Shanghai University), China
TANG Di (University of Science and Technology Beijing), China
Vice Chairmen
GUO Aimin (CITIC Metal Co., Ltd.), China
KANG Yonglin (University of Science and Technology Beijing), China
LU Jiangxin (Baosteel Group Corporation), China
LUO Haiwen (University of Science and Technology Beijing), China
Members
CAO Wenquan (Central Iron and Steel Research Institute), China
DAI Yigang (Baosteel Group Corporation), China
DING Hua (Northeastern University), China
HUANG Mingxin (The University of Hong Kong), Hongkong, China
HUI Weijun (Central Iron and Steel Research Institute), China
JIANG Haomin (Baosteel Group Corporation), China
LI Lin (Shanghai University), China
LI Yongbing (Shanghai Jiao Tong University) , China
LIU Jianhui (Central Iron and Steel Research Institute), China
LIU Rendong (Ansteel Group Corporation), China
MA Mingtu (China Automotive Engineering Research Institute Co., Ltd.), China
PAN Hua (Baosteel Group Corporation), China
SHANG Chengjia (University of Science and Technology Beijing), China
WANG Cunyu (Central Iron and Steel Research Institute), China
WANG Li (Baosteel Group Corporation), China
XU Wei (Northeastern University), China
YANG Zhigang (Tsinghua University), China
ZHOU Qing (Tsinghua University), China
n Technical Program Timetable
November 16th, 2016 (Wednesday)
08:40-09:05 Recent Progress of Development and Application of AHSS in Baosteel (Z023#, Plenary-01)
WANG Li*, ZHONG Yong, LU Jiangxin, Baosteel Group Corporation, China
09:05-09:30 Lightweight Steel Solutions: A New Body Concept for Electric Vehicle
(hmns2016-102, Plenary-02)
CHUNG Gisuk*, KIM Jaehyun, LEE Hongwoo, CHUNG Kyunghwan,LEE Hyounyoung, KANG
Yeonsik, NAM Jaebok, POSCO, Korea
09:30-09:55 VAMA Offering Technology for Safer and Greener Cars (W020#, Plenary-03)
COBBAUT Jurgen*, VAMA, China
09:55-10:20 High Strength Steel: The Best Solution for Automotive Safety (W034#, Plenary-04)
PAEGLE Jesse Paegle, JWP Engineering & Consulting, Brazil
BarjasAmado Rodrigo, França Erico, STUART NOGUEIRA Marcos A.*, CompanhiaBrasileira de
Metalurgia e Mineração– CBMM, Brazil
10:20-10:30 Discussion
11:10-11:35 Ultra High Strength Steels – Delivering Strength and Weight Savings to Advanced Body
Architectures (W038#, Plenary-06)
ZALUZEC Matthew J.*, Ford Motor Company, USA
11:35-12:00 BIW Structure Design and Latest Steel Technology Applications (Z024#, Plenary-07)
ZHANG Jack*, FAW Group Corporation, China
12:00-12:25 Challenges in Forming & Joining of Advanced Materials for Lightweight Applications
(W032#, Plenary-08)
CARLSON Blair E., Jeff WANG*, General Motors R&D, USA
12:25-12:35 Discussion
November 16th, Wednesday
Plenary Session of HMnS (Shudu Hall (3rd Floor) of Century City International Convention Centre) 14:00-17:45
14:35-15:10 Control of The Mechanical Behavior of High Mn Steels by Extrinsic and Intrinsic
Parameters (W021#, Plenary-10)
BLECK Wolfgang*, PRAHL Ulrich, SONG Wenwen, RWTH Aachen University, Germany
15:10-15:45 Spatial restriction effect in the γ→ε martensitic transformation in High-Mn steel
(hmns2016-107, Plenary-11)
TAKAKI Setsuo, Kyushu University, Japan
17:10-17:45 Medium Manganese Steel: a Challenge to both Steel Mill and Auto Maker
(Z022#, Plenary-14)
DONG Han*, Central Iron and Steel Research Institute / Shanghai University, China
November 17th, Thursday
Session A1: High Manganese Steels- Alloy Design, Product & Fundamentals (Room: A) 08:30-12:20
Chairs: TASAN C. Cem, Massachusetts Institute of Technology, USA
SHAN Aidang, Shanghai Jiao Tong University, China
08:55-09:15 Status of High Manganese Steel Products for Energy Industry and Transportation System
(hmns2016-131, A1-02)
KIM Sung Kyu*, KIM Yong Jin, SONG Tae Jin, LEE Unhae, CHO Won Tae, HA Yumi, SUH In-Shik,
CHOI Joo,POSCO, Korea
09:35-09:55 Effect of Cu on The Mechanical Properties of High Manganese Steel for Cryogenic
Application (cn-hmns2016-45, A1-04)
QIAN Zhen*, SUN Yong, MEEHAN Pau, DANIEL William J.T., DING Shichao, The University of
Queensland, Australia
SHI Le, Baoshan Iron & Steel Co., LTD, China
09:55-10:15 Quenching and Partitioning (Q&P) Processed Medium Mn Steel (W010#, A1-05)
SEO EunJung*, CHO Lawrence, KIM Ji Hoon Kim, DE COOMAN Bruno C., Pohang University of
Science and Technology, Korea
ESTRIN Yuri Estrin, NUST MISiS, Russia/Monash University, Australia
12:00-12:20 Mechanistic contribution of the interplay between microstructure and plastic deformation in
hot-rolled Fe–11Mn–2/6Al–0.2C steel (cn-hmns2016-43-en, A1-10)
CAI Zhihui*, CAI Bo, DING Hua, Northeastern University, China
Session B1: High Manganese Steels- Hydrogen Embrittlement & Light Weight Steel (Room: B) 08:30-12:20
Chairs: TSUZAKI Kaneaki, Kyushu University, Japan
Hua DING, Northeastern University, China
08:30-08:55 Invited Hydrogen effects in high Mn steels with martensitic transformation and deformation
twinning (hmns2016-109, B1-01)
TSUZAKI Kaneaki*, KOYAMA Motomichi, Kyushu University, Japan
09:15-09:35 Hydrogen Effects on The Microstructure Evolution of High Manganese Steel During Tensile
Deformation (hmns2016-13, B1-03)
GUO Xiaofei*, WU Hao, PRAHL Ulrich, BLECK Wolfgang, RWTH Aachen University, Germany
ZAEFFERER Stefan, Max-Planck-Institut für Eisenforschung GmbH, Germany
10:35-11:00 Invited Strain Hardening Behavior of Fe-Mn-Al-C Low Density Steels During Tensile
Deformation (cn-hmns2016-55, B1-06)
DING Hua*, HAN Dong, CAI Zhihui,Northeastern University, China
11:20-11:40 Microstructure and Mechanical Properties of Ferrite-austenite Duplex Low Density Medium
Mn Steel (hmns2016-113, B1-08)
TONIZZO Quentin*, GOURGUES Anne-Françoise, MAZIÈRE Matthieu, PSL Research University,
France
PERLADE Astrid, ZUAZO Ian, ArcelorMittal Maizières, France
11:40-12:00 Effects of Annealing Treatment on The Microstructure and Properties of The Low Density
Fe-Mn-Al-C steel (cn-hmns2016-60, B1-09)
YANG Hao*,ZHANG Xiaofeng,KAN Zhongwei,Shi Qi,HUANG Zhenyi, University of Anhui
Technology, China
CHEN Guang, Nanjing University of Science and Technology, China
12:00-12:20 Effect of Cooling Rate on Microstructure and Mechanical Properties of Fe-1C-15Mn-10Al
Low-density Steel (Z005#, B1-10)
SHI Wen*, HU Qianqian, YAO Liang, LI Lin, Shanghai University, China
LIU rendong, GUO jinyu, Ansteel Group Co, China
Session C1: Advanced Steel- Precipitation, Simulation & TRIP Steel (Room: C) 08:30-12:45
Chairs: LU Jian, City University of Hong Kong, Hong Kong, China
MOHRBACHER Hardy, NiobelCon bvba, Belgium
08:30-08:55 Invited Direct and Indirect Benefits of Niobium Microalloying to Automotive Sheet Steel
(W022#, C1-01)
MOHRBACHER Hardy*, NiobelCon bvba, Belgium
08:55-09:15 Lightweight Design of Dumping Truck with Advanced High Strength Steels
(cn-hmns2016-106, C1-02)
ZHANG Yongqing*, Guo Aimin, CITIC Metal Co., Ltd., China
FU Peimao, TAIYUAN IRON&STEEL (GROUP) COMPANY LTD., China
PAN Yongping, Henan Junton Vehicle Co., Ltd., China
09:35-09:55 Interactive Formation of Cu-rich Phase, Reversed Austenite and Alloyed Carbide in HSLA
Steel During Intercritical Heat Treatment (cn-hmns2016-122, C1-04)
LIU Qingdong*, GU Jianfeng, Shanghai Jiao Tong University, China
09:55-10:15 Development of a 780MPa Ferritic Hot Rolled High Strength Steel with Superior
Stretch-Flangeability (cn-hmns2016-34, C1-05)
WANG Huanrong*, WANG Wei, HUANG Rui, YANG Ana, LIU Junliang, Baoshan Iron & Steel Co.
Ltd. China
10:15-10:35 Influence of temperature field on the property of Hot Rolled Complex-phase (CP) Steel Strip
(cn-hmns2016-92, C1-06)
ZHANG Yu*, SHI Xiaoguang, HAN Bin, DONG Yi, SUN Chengqian, LIU Rendong, ANGANG Group,
China
10:55-11:20 Invited Lightweight Automobile Structures Using High Strength and High Ductility
Nanostructured Metals (W047#, C1-07)
LU Jian*, City University of Hong Kong, Hong Kong, China
Session D1: Advanced Forming, Joining and Parts Manufacturing Technology (Room: D) 08:30-12:40
Chairs: LI Yongbing, Shanghai Jiao Tong University, China
SUN Jiquan, University of Science and Technology Beijing, China
08:50-09:15 Invited Effect of Normal Strain on Liquid Adhesive Bonding in Car Manufacturing Process
(W033#, D1-02)
YANG Kai Mi*, DILGER Klaus, STAMMEN Elisabeth, Technical University of Braunschweig,
Germany
WIETHOP Philipp, FRAUENHOFER Michael, AUDI AG, Germany
09:15-09:35 Microstructural Evolution and Mchanical Properties of Friction Stir Welded Carbon Steel
Under Low Heat Input (Z039#, D1-03)
XUE P. *, ZHANG H., WANG D., XIAO B.L., MA Z.Y., Institute of Metal Research, Chinese
Academy of Sciences, China
09:35-09:55 The Fracture Mode Transition Under Dynamic Loading of RSW Lap-shear Joints
(cn-hmns2016-95, D1-04)
LI Wei*, XIA Yon1, ZHAO He, Tsinghua University, China
YANG Xin, General Motors, China
09:55-10:15 Challenges in the Resistance Spot Welding of New Generation Advanced High Strength
Steels (hmns2016-31-2, D1-05)
PARK Yeong-Do*, MURUGAN Siva Prasad, Dong-Eui University, Korea.
10:35-11:00 Invited Magnetically Assisted Resistance Spot Welding (MA-RSW) (Z040#, D1-06)
LI Yongbing*, Shanghai Jiao Tong University, China
11:20-11:40 The Application of Rheology Theory in High Strength Steel Inelastic Recovery Behavior
(cn-hmns2016-119, D1-08)
SUN Jiquan*, YIN Yanjun, KANXinfeng, LI Bin, University of Science and Technology Beijing,
China
09:45-10:10 Invited Design and Application of Nb-bearing HSS in Lightweight Dump Trucks (E1-04)
RODOLFO MORGADO RIBEIRO*, CBMM, Brazil
10:30-10:55 Invited Car Body's EVI Development in The New Situation (E1-05)
MIAO Xinlei*, TAGAL, China
10:55-11:20 Invited Development and Application of High Performance Stainless Steel for Exhaust
System of Automobiles (cn-hmns2016-110, E1-06)
SHANG Chengjia*, University of Science and Technology Beijing, China
11:20-11:45 Invited Newly-Developed TRIP Steels for Automotive in POSCO (hmns2016-63, E1-07)
CHO Hangsik*, KWAK Jaihyun, SUH Inshik, POSCO, Korea
11:45-12:10 Invited The EVI Based on Niobium Lightweight Solutions and Forward Materials Selection
Methodology (E1-08)
LU Hongzhou*, BIAN Jian, WANG Wenjun, GUO Aimin, CITIC Metal Co., Ltd., China
LI Jun, Chery Automobile Co., Ltd., China
XIAO Feng, Wuhan Shangshan tech Co., Ltd., China
Li Lijun, WISCO, China
Session A2: High Manganese Steels- Alloy Design, Product & Fundamentals (Room: A) 14:00-17:55
Chairs: LEE Kyooyoungn, POSCO, Korea
HUANG Mingxin, The University of Hong Kong, Hong Kong, China
14:00-14:25 Invited New Medium Mn Steel Grades with Exceptional Tensile Properties Achieved at
Different Mn Contents (Z013#, A2-01)
LUO Haiwen*, HU Bin, University of Science and Technology Beijing, China
YANG Feng, Central Iron and Steel Research Institute, China
14:25-14:50 Invited Recent Progress on Medium Manganese Steels in POSCO (hmns2016-132, A2-02)
LEE Kyooyoung*, LEE Seawoong, RYU Joo Hyun, POSCO, Korea
DE COOMAN Bruno Charles, POSTECH, Korea
14:50-15:10 Excellent Mechanical Properties Balance of Fine 0.1C-2Si-5Mn Fresh Martensite and
Ferrite+Austenite Steels (hmns2016-77, A2-03)
TORIZUKA Shiro, MAEDA Akihiro, KUMAKURA Mia, ADACHI Hiroki, University of Hyogo, Japan
17:15-17:35 The Effect of Dislocation Density on The Mechanical Properties and Deformation Twinning
of a TWIP Steel (hmns2016-98, A2-09)
LI Y.Z., LIANG Z.Y., HUANG M.X.*, The University of Hong Kong, Hong Kong, China
14:00-14:25 Invited Increasing The Yield Strength of High Manganese Twinning Induced Plasticity
Steels by The Means of Ultra Rapid Recovery (hmns2016-70, B2-01)
FABREGUE Damien*, Université de Lyon/INSA-Lyon, France
BOUAZIZ Olivier, BARBIER David, ArcelorMittal Global Research and Development, France
15:10-15:30 High Strain Rate Deformation Behavior of High Mn Steels at Cryogenic Temperature
(hmns2016-133, B2-04)
HA Yumi*, LEE Soog-Gi, SUH In-Shik, POSCO, Korea
KIM Nack J., POSTECH, Korea
15:30-15:50 Effects of Grain Size on the Formation of Adiabatic Shear Band in High Manganese TRIP
Steel Under High-Speed Impact (cn-hmns2016-113, B2-05)
LI Ruifeng*, YANG Ping, University of Science and Technology Beijing, China
16:10-16:35 Invited Heat Treating Opportunities for Medium Manganese Steels (hmns2016-30, B2-06)
EMMANUEL De Moor*, JOHN G. Speer, DAVID K. Matlock, Colorado School of Mines, USA
16:35-16:55 Properties and Applications of Industrially Processed Hot Rolled High-Manganese TWIP
Steels (W005#, B2-07)
RÖSLER Thorsten*, NAGEL Maximilian, DRIESSEN Johan, TOMITZ Andreas, OVERRATH Jens,
Hoesch Hohenlimburg GmbH, Germany
HOFMANN Harald, RICHTER Helmut, FERKEL Hans,Thyssenkrupp Steel Europe AG, Germany
17:15-17:35 Microstructure and Texture Evolution of Fe-Mn-C Steel During Isochronal Annealing
(cn-hmns2016-63, B2-09)
WANG Bao-chuan*, LI Tao, Zhao Yi , Han Ni-dan, Yao Ye, YANG Jian-wei, Shougang Group,
China
17:35-17:55 Bake-Hardening behaviour of high manganese TWIP steels: Potential and limitations
(hmns2016-38, B2-10)
WESSELMECKING S.*, INGENDAHL T., GOSPODINOV I., BLANKART C., BLECK W., RWTH
Aachen University, Germany
HOFMANN H., ThyssenKrupp Steel Europe, Germany
ROESLER T., NAGEL M., Hoesch Hohenlimburg GmbH, Germany
UNRUH K., Faurecia Autositze GmbH, Germany
Session C2: Advanced Steel- QP Steel & DP Steel (Room: C) 14: 00-17:50
Chairs: EDMONDS David, University of Leeds, UK
YU Hao, University of Science and Technology Beijing, China
14:00-14:25 Invited Diffraction Studies of Quenched and Partitioned (Q&P) Steel Multiphase
Microstructures Relevant to AHSS Automotive (W002#, C2-01)
EDMONDS David*, BIGG Timothy, University of Leeds, UK
14:25-14:45 A Notably Increased Toughness Without Losing Strength on a Low Carbon Martensite Steel
Via a Short Stay at Low Temperature (cn-hmns2016-9, C2-02)
YANG Zhinan*, ZHANG Fucheng, JI Yunlong, WANG Yanhui, WU Dongdong, Yanshan University,
China.
14:45-15:05 Understanding Hole Expansion Properties of a QP Steel Using Orientation Microscopy and
Crystal Plasticity Modelling (hmns2016-75, C2-03)
LI Zhuangming*, ZAEFFERER Stefan, RAABE Dierk, Max Planck Institut fuer Eisenforschung
GmbH, Germany
THIESSEN Richard Georg, ThyssenKrupp Steel Europe AG, Germany
16:50-17:10 Effect of Strain Rate on Dynamic Deformation Behavior of Dual Phase DP780 Steel
(cn-hmns2016-6, C2-08)
LIU Huasai*, KUANG Shuang, HAN Yun, XIE Chunqian, TENG Huaxiang, Shougang Group, China
17:10-17:30 Microstructure and Mechanical Properties of an Ultrahigh Strength Dual Phase Steel
Developed by Intercritical Annealing (cn-hmns2016-125-en, C2-09)
LI Wei, WANG Li, Baoshan Iron & Steel Co., Ltd., China
SPEER John G, Colorado School of Mines, USA
14:00-14:25 Invited Fracture Toughness of Medium-Mn Steel after Hot Forming (hmns2016-99, D2-01)
WANG Jianfeng, LU Qi*, General Motors, USA
HAN Qihang, WANG Li, Baoshan Iron & Steel Co., LTD, China
HUANG Mingxin, Hong Kong University, Hongkong, China
15:30-15:50 An Integrated CALPHAD Based Tool in Developing High Strength Steels for Automotive
Application (W046#, D2-05)
JIN Shan, BRATBERG Johan*, CHEN Qing, Thermo-Calc Software AB, Sweden
15:50-16:10 Tea Break
16:10-16:35 Invited The Lightweight of Commercial Vehicle and the Application of High Strength Steel
(cn-hmns2016-83-2, D2-06)
LU Hongzhou*, WANG Wenjun, GUO Aimin, CITIC Metal Co., Ltd. P. R. China
WAN Guoxi, WEI Xuan, Anyang Iron and Steel Group Corporation, China
ZHANG Lilong, Benxi steel Co., Ltd. China
LIU Xiandong, Beihang University, China
16:55-17:15 TWIP Steel Cutting Process Assessment With The Use Of Damage Models (W030#, D2-08)
Jan DZUGAN*, Antonin PRANTL, Ivana POLAKOVA, Jaromir DLOUHY, Tomas KUBINA, COMTES
FHT a.s., Czech Republic
17:15-17:35 Crystal Plasticity based Modelling of Damage and Fracture in High Mn TWIP Steels
(hmns2016-78, D2-09)
MADIVALA Manjunatha*, BLECK Wolfgang, PRAHL Ulrich, RWTH Aachen University, Germany
SEGEL Christian, WEIDNER Anja, BIERMANN Horst, Technical University Bergakademie
Freiberg, Germany
14:00-14:25 Invited Development and Application of Lightweight Wheels for Commercial Vehicles
(E2-01)
LIU Xiandong*, Beihang University, China
14:25-14:50 Invited EVI Ability Construction for Materials Enterprises Oriented Body Structure
Crashworthiness Design and Development (E2-02)
MENG Xianming*, China Automotive Technology & Research Center, China
15:15-15:40 Invited Impact of Nb Microalloyed Press Hardening Steels on The Passive Safety of Modern
Vehicles (W042#, E2-04)
BIAN Jian*, Niobium Tech Asia, Singapore
08:30-08:55 Invited Microstructure and Mechanical Properties of Medium Manganese Steels During
Intercritical Annealing (Z004#, A3-01)
ZHAO C., ZHANG C., CHEN H., YANG Z.-G.*, Tsinghua university, China
09:15-09:35 Influence of Al, Cr, Si, and C on Mechanical, Thermal, and Corrosive Properties in
Fe-Mn-Al-Cr-Si-C System (hmns2016-33, A3-03)
GEORGEOU Zacharias*, Salzgitter Mannesmann Forschung GmbH, Germany
09:35-09:55 Role of Mn and Sion the Phase Characteristics and Mechanical Properties of Duplex (ferrite
plus austenite) Medium Mn Steels (hmns2016-32, A3-04)
SUN Binhan*, YUE Stephen, McGill University, Canada
FAZELI Fateh, SCOTT Colin, CanmetMATERIALS, Natural Resources Canada, Canada
09:55-10:15 The Influence of (Ti, V) C Precipitation on the Mechanical Properties of High Mn TWIP
Steel (W011#, A3-05)
GWON Hojun*, SHIN Sunmi, DE COOMAN B.C., Pohang University of Science and Technology,
Korea
10:35-11:00 Invited Segregation and Austenite Reversion at Dislocations in a Binary Fe-9%Mn Steel
Studied by Correlative TEM-atom Probe Tomography (hmns2016-44, A3-06)
KUZMINA Margarita, PONGE Dirk*, HERBIG Michael, SANDLÖBES Stefanie, RAABE Dierk,
Max-Planck-Institut für Eisenforschung GmbH, Germany
12:05-12:25 7 Mn Steel with High Strength and Large Elongation Resulting from Both Transformation
and Twining Induced Plasticity (Z010#, A3-10)
HU Bin*, LUO Haiwen, WEN Pengyu, University of Science and Technology Beijing, China
08:30-08:55 Invited Cyclic Deformation and Fatigue Crack Growth Behavior in Fe-Mn-C-(Al) TWIP
Steels (cn-hmns2016-19, B3-01)
QIAN Lihe*, LIU Shuai, MA Penghui, GUO Pengcheng, MENG Jiangying, ZHANG Fucheng,
Yanshan University, China
09:35-09:55 Solution of Interfacial Heat Transfer Coefficient for The Hot-formed High Strength Steel
(cn-hmns2016-114, B3-04)
LI Xiaodong*, CHANG Ying, HU Ping, Dalian University of Technology, China
WANG Cunyu, East China Branch of Central Iron & Steel Research Institute (CISRI), China
09:55-10:15 Deformation Mechanism of High-Mn Austenitic Steels with Fully Recrystallized Ultrafine
Grained Structures (hmns2016-97, B3-05)
KITAMURA Hiroki*, BAI Yu, SHIBATA Akinobu, TSUJI Nobuhiro, Kyoto University, Japan
TIAN Yanzhong Tian, Kyoto University, Japan / Institute for Metals Research, Chinese Academy
of Science, China
SAHA Rajib, Kyoto University, Japan / Tata Steel, India
10:35-11:00 Invited Effects of Stress Triaxiality on Tensile Fracture of a TWIP-aided High Mn Steel
(hmns2016-46, B3-06)
CHOI B. -H., YEH J. -W., PARK K. -T.*, Hanbat National Uni., Korea
NOH K. M., LEE C. S., POSCO, Korea
11:00-11:20 The Effect of Deformation Twins Induced Previously by Cold Rolling on The Mechanical
Behavior of Hadfield Steel (cn-hmns2016-60-en, B3-07)
MAHMOUD Khedr*, LEE Wie, JIN Xuejun, Shanghai Jiao Tong University, China
12:00-12:20 Effects of Strain Partitioning on Strain Rate Dependency of Tensile Behavior of a TRP-aided
Duplex Stainless Steel (W031#, B3-10)
CHOI J. Y.*, POSCO, Korea
HAN H. N. Han, PARK K. -T., Seoul National Univ., Korea
Session C3: Advanced Steel - Processing, Application Technology & TRIP Steel (Room: C) 08:30-12:40
Chairs: STEINEDER Katharina, University of Applied Sciences Upper Austria, Austria
CAO Wenquan, Central Iron & Steel Research Institute, China
08:30-08:55 Invited The Ultrahigh Super-plasticity and Deformation Mechanism of The Cold Rolled
Medium-Mn Steel With Commercial Production and Application Potential (Z042#, C3-01)
CAO Wenquan*, DONG Han, WENG Yuqing, Central Iron and Steel Research Institute (CISRI),
China
HUANG Chongxiang, Sichuan University, China
08:55-09:15 Effect of Tempering Time on The Microstructure and Mechanical Properties of Ultra- high
Strength Hot Stamping Steel After Quenching (cn-hmns2016-70, C3-02)
LIANG Jiangtao*, ZHAO Zhengzhi, LIANG Juhua,ZHAO Yue, TANG Di, ZHAO Aimin, WU Huibin,
University of Science and Technology Beijing, China
09:35-09:55 Strengthening an AISI 316L Stainless Steel by Using Nano-twinned Austenitic Grains (Z050#,
C3-04)
YAN F.K.*, TAO N. R., LU K., Institute of Metal Research, Chinese Academy of Sciences, China
ARCHIE F., GUTIERREZ-URRUTIA I., RAABE D., Max-Planck-Institut fur Eisenforschung,
Germany
09:55-10:15 Spot Weldability in Automotive Ultra High Strength Steel Sheet (W017#, C3-05)
Akihiko NAGASAKA*, Katsumi HORIGUCHI, Yu KITAHARA, Shinya HANAOKA, Nagano College,
Japan
Junya NAITO, Akira IBANO, Shota CHINZEI, Kobe Steel, Ltd., Japan
Tomohiko HOJO, Iwate University, Japan
Koki NAGASAKA, Shoko Chukin, Japan
10:15-10:35 Experimental and Numerical Study on Local and Overall Mechanical Properties of Laser
Welded DP980 Steels (Z011#, C3-06)
JIA Qiang*, GUO Wei, PENG Peng Peng, ZHU Ying, Beihang University, China
ZOU Guisheng, Tsinghua University, China
11:20-11:40 The Influence of Rolling Reduction on The Microstructure and Mechanical Properties of
Cold-rolled Medium-Mn Steel (cn-hmns2016-104, C3-08)
HU Jun*, LIU Yongqian, LIANG Wen, Wuhan Iron and Steel Co., China
CAO Wenquan, Central Iron and Steel Research Institute, China
12:20-12:40 Effect of Strain Rate on Deformation Behavior of B2 (FeAl) Strengthened Lightweight Steels
(hmns2016-127, C3-11)
KIM Sang-Heon*, NAM Chungho, KIM Hansoo, LEE Sunghak, KIM Nack J., POSTECH, Korea
08:30-08:50 Effect of Coiling Temperature on Microstructure and Tensile Behavior of a Hot Rolled
Ferritic Lightweight Steel (cn-hmns2016-61, D3-01)
WANG Junfeng, WANG Xiaodong, Shanghai Jiaotong University, China
YANG Qi*, WANG Li, Baoshan Iron and Steel Co., Ltd, China
10:15-10:40 Invited Some Key Problems in The Research and Development of High Performance Gear
Steel for Automobile (Z044#, D3-05)
MIN Yongan*, Shanghai University, China
10:40-11:05 Invited Remarkable Improvement of Damping Capacity in High strength Fe-Mn alloy by
Changing Defects Configurations (cn-hmns2016-73-en, D3-06)
QIAN Bingnan, WU Bingjie, WEN Yuhua*, Sichuan University, China
11:25-11:45 Effects of V-Nb Micro-alloying on The Microstructure and Property of Non-quenched and
Tempered Steel (Z048#, D3-08)
BAO Yaozong, CAO Wenquan, DONG Han, Central Iron & Steel Research Institute, China
CHEN Shaohui, ZHENG Lihui,TAN Li, Sha Gang Group Huai Gang Special Steel CO.,LTD, China
LIU Pan, Great Wall Motor Company Limited, China
XU Haifeng*, Central Iron & Steel Research Institute, China / Huazhong University of Science
and Technology, China
11:45-12:05 Formation Mechanism and Process Control of Bearing Steel Defects (cn-hmns2016-127,
D3-09)
CHEN Songjun*, LI Liejun, SUN Haibo, PENG Zhengwu, South China University of Technology,
China
HUO Xiangdong, Jiangsu University, China
12:05-12:25 Reason Analysis on the Inner Wall Cracks of AISI 13300 Seamless Pipe (Z047#, D3-10)
FAN Jian-wen*, FENG Guang-hong, ZHANG Hong-liang, YU Gui-ling, Central Iron & Steel
Institute, China
YU Xiang-hui,Qinghai Province Hydrogeology and Engineering Geology and Environmental
Geology Survey Institute, China
08:30-08:50 Hot-Dip Galvanizing Concepts of Advanced High Strength Steels for Automotive
Application (hmns2016-49, E3-01)
PARMA Georg*, WUTTKE Thiemo, Thyssenkrupp Steel Europe, Germany
IGELBUESCHER Andreas, MIAO Xin Lei, TAGAL - TKAS Auto Steel Company Limited, China
08:50-09:10 Research on Galvanisability of High Manganese TWIP Steel With Containing Vanadium
(cn-hmns2016-30, E3-02)
REN Tingdong*, SHI Wen, LI Lin, JIAO Siyuan, Shanghai University, China
LIU Rendong, LIN Li, YANG Honggang, Ansteel Group Co., China
09:10-09:30 Liquid Metal Embrittlement-free Resistance Spot Welds of Zn-coated Advanced High
Strength
Steels (hmns2016-31-1, E3-03)
PARK Yeong-Do*, MURUGAN Siva Prasad, HAQUE Md Anwarul, ASHIRI Rouholah, Dong-Eui
University, Korea
09:30-09:50 Effect of Dew Point Shift on Selective Oxidation of Si Bearing Steel (cn-hmns2016-91, E3-04)
JIANG Guangrui*, TENG Huaxiang, WANG Haiquan, LIU Guanghui, Shougang Group, China
LIU Libin, Shougang Group, China / University of Science and Technology Beijing, China
10:10-10:30 Coating Weight and Thickness of an Ultra Low Carbon Deep Drawing Steel Controlled by
Zinc Bath Chemistry and Dew Point (cn-hmns2016-37-en, E3-05)
FANG Fang*, CHEN Yi-ming, DU Xiao-feng, HUANG Feng, WISCO, China
10:30-10:50 Influence of Surface Roughness of Cold-rolled Steel Sheet on Cathodic Electrodeposition
Coating (Z038#, D3-06)
LI Zitao, SUN Chenyang, ZHANG Wu, ZHAN Hua, Maanshan Iron and Steel Company, China
10:50-11:10 Study of Influences of Deforming on Surface Profiles of Hot-dip Galvanizing Steel Sheets for
Automobile Panels (cn-hmns2016-64, E3-07)
QIAO Zhaohui*, DAI Yigang, ZHAO Yanliang, Baoshan Iron & Steel Co., Ltd., China
Session A4: High Manganese Steels- Fundamentals, Modelling and Simulation (Room: A) 14:00-17:55
Chairs: MATLOCK David, Colorado School of Mines, USA
CHEN Hao, Tsinghua University, China
14:00-14:25 Invited Effects of Strain Rate and Temperature on the Mechanical Properties of Medium
Manganese Steels (W008#, A4-01)
RANA Radhakanta**, MATLOCK David*, SPEER John, DE MOOR Emmanuel, Colorado School of
Mines, USA (** Currently at Tata Steel R&D, 1970CA IJmuiden, The Netherlands)
14:25-14:50 Invited Ferrite Transformation and Mechanical Properties of Medium Manganese Steels
(hmns2016-74, A4-02)
ITO Atsushi, MATSUI Yo-ichiro, BAI Yu, Kyoto University, Japan
SHIBATA Akinobu, TSUJI Nobuhiro*, Kyoto University, Japan / Elements Strategy Initiative
for Structural Materials (ESISM), Japan
15:30-15:50 Hot Ductility of Ti/V Containing High-Mn Austenitic Steels (cn-hmns2016-8, A4-05)
LIU Hongbo*, LIU Jianhua, DING Hao, WU Bowei, University of Science and Technology Beijing,
China
LI Shiqi, Hebei Iron and Steel Group, China
16:10-16:35 Invited Modeling of Interface Migration and Carbon Partitioning During Quenching and
Partitioning (cn-hmns2016-50, A4-06)
DAI Zongbiao, HE JianGuo, YANG Zhigang, ZHANG Chi, CHEN Hao*, Tsinghua University,
China
16:35-16:55 Predicting The Fraction of Austenite after Intercritical Annealing in Medium-Mn Steels
(hmns2016-82, A4-07)
FEI Huyan, YAN Jiayi, ÅGREN John, BORGENSTAM Annika,KTH Royal Institute of Technology,
Sweden
16:55-17:15 Designing High Mn Austenitic Steels via a Dislocation Density Based Constitutive Model
(W006#, A4-08)
KANG Jee-Hyun, KIM Sung-Joon Kim,Pohang University of Science and Technology (POSTECH),
Korea
14:00-14:25 Invited Mechanical Behavior and Micro Mechanism of High Strength TWIP Steel at High
Strain Rates (cn-hmns2016-67, B4-01)
XU Mei, MI Zhenli, XU Yapeng, YANG Yonggang, ZHAO Zhengzhi*, University of Science and
Technology Beijing, China
14:25-14:50 Invited Nano-sized Intermetallic Kappa Phase Strengthening in Al-alloyed Steels for
Automotive Applications (hmns2016-61, B4-02)
SONG Wenwen, BLECK Wolfgang*, RWTH Aachen University, Germany
14:50-15:10 Unusual Grain Refinement Effect on The Tensile Properties and Twinning Behavior of
High-carbon Fe-Mn-C TWIP Steel (cn-hmns2016-42-en, B4-03)
LIU Shuai*, QIAN Lihe, LI Dongdong, MA Penghui, MENG Jiangying, ZHANG Fucheng, Yanshan
University, China
15:10-15:30 Effect of Intercritical Annealing on Retained Austenite and Properties of a Low Carbon
3Mn Steel (cn-hmns2016-76, B4-04)
XIE Zhenjia*, SHANG Chengjia, University of Science and Technology Beijing, China
15:30-15:50 Effect of Al Addition on Microstructure and Mechanical Properties of High Mn Steel
(hmns2016-130, B4-05)
CHO Won Tae*, KIM Sung Kyu, SONG Tae, CHIN Kwang-Geun, POSCO, Korea
16:10-16:35 Invited Investigation of a Production Route for Medium Manganese High Strength Steels
Based on Twin-Roll Strip Casting (hmns2016-58, B4-06)
HAUPT Marco*, DAAMEN Markus, OFFERMANNS Nico, HIRT Gerhard, RWTH Aachen University,
Germany
17:15-17:35 Influence of the Manganese Content on the Hot Ductility Behaviorof High Manganese Steels
within the System Fe-Mn-C (W004#, B4-09)
STEENKEN Bernhard*, LOPES REZENDE Joao Luiz, SENK Dieter, RWTH Aachen University,
Germany
17:35-17:55 Refining The Solidification Structure of TWIP Steel Using Ce-based Inclusions
(hmns2016-51, B4-10)
CHO Jung-Wook*, LEE Soo-Yeon, HEO Yoon-Uk, Pohang University of Science and Technology,
Korea
14:00-14:25 Invited Intercritical Annealing Response of Two Medium Manganese Steels Having
Different Carbon Concentrations (hmns2016-41, C4-01)
KANG Singon, SPEER John G., MATLOCK David K., DE MOOR Emmanuel*, Colorado School of
Mines, USA
KRIZAN Daniel, voestalpine Steel Division GmbH, Austria
14:25-14:45 Microstructure Evolution and Mechanical Properties of 3.0wt% Mn High Strength Steel
During Q-L-T Process (cn-hmns2016-62, C4-02)
DENG Xiangtao, HUANG Long, WANG Zhaodong, WANG Guodong, Northeastern University,
China
14:45-15:05 Tensile Property Improvement in Medium-Mn (α+γ) Duplex Lightweight Steels Showing
TRIP Mechanism (W027#, C4-03)
SONG Hyejin*, SOHN Seok Su, LEE Byeong-Joo, LEE Sunghak Lee, Pohang University of Science
and Technology, Korea
KWAK Jai-Hyun Kwak, POSCO, Korea
15:05-15:25 The microstructure evolution during partitioning process in a one-step Q&P steel
(cn-hmns2016-107, C4-04)
PENG Fei*, GU Xingli, Wang Yuan, XU Yunbo, Northeastern University, China
15:25-15:45 Size Effect on Initial Dislocation Density in Low Carbon Bainitic Steels (hmns2016-83,
C4-05)
HE S.H.*, HUANG M.X., The University of Hong Kong, Hong Kong, China
K. Y. ZHU, Arcelor Mittal Research, France
16:30-16:50 Surface Selective Oxide Reduction on Intercritically Annealed Medium Mn Steel (W009#,
C4-07)
OH Jong Han, CHO Lawrence, JO Kyoung Rae*, DE COOMAN Bruno C., Pohang University of
Science and Technology, Korea
KIM Myung Soo, POSCO, Korea
16:50-17:10 Martensite Softening and Cementite Precipitation during Annealing of 3rd Generation
Advanced High Strength Steels (hmns2016-104, C4-08)
WU Yuxiang*, SUN Wenwen, HUTCHINSON Christopher, Monash University, Australia
STYLES Mark, CSIRO Manufacturing, Australia
ARLAZAROV Artem, ArcelorMittal Research and Development, France
14:40-15:00 Numerical Analysis of Oscillation of Servo-Hydraulic Systems for High Strain Rate Steel
Test (Z009#, D4-03)
YIN Bin*, LAI Xinghua, XIA Yong, Tsinghua University, China
15:00-15:20 Research Progress of TWIP Steel and QP Steel in Ansteel (cn-hmns2016-86, D4-04)
WANG Xu, Ansteel Group, China
16:25-16:45 Effects of Strain Rate on The Mechanical Properties and Microstructure of The High-Mn
Steel (cn-hmns2016-59, D4-07)
SUN Shao-heng*, ZHAO Ai-min, WU Qi-wei, University of Science and Technology Beijing,
China
16:20-16:55 Production Technologies for High Strength Steel Profiles in Automotive Field
DE MARCO Stefano*, GASPRINI S.p.A., Italy
16:55-17:30 Roll Forming Lines For Automotive Components, Variable Section and AHSS Steels
BRESSAN Ugo*, STAM S.p.A, Italy
Poster Session
Time: November 16-18, 2016
Room: The Lobby Area of 3rd Floor of Century City International Convention Centre
Influence of Al on Microstructures and Mechanical Properties of Ultra High Manganese Cast Steel (P-01,
cn-hmns2016-46)
PENG Shiguang, SONG Renbo, CAI Changhong, PEI Zhongzheng, TAN Zhidong, FENG Yifan, University of
Science and Technology Beijing, China
Effect of Water Toughening Temperatureon Microstructure and Properties of V-super High Manganese
Steel (P-02, cn-hmns2016-49)
FENG Yifan, SONG Renbo, PENG Shiguang, CAI Changhong, TAN Zhidong, University of Science and
Technology Beijing, China
7 Mn Steel with High Strength and Large Elongation Resulting from Both Transformation and Twining
Induced Plasticity (P-03, Z010#)
HU Bin, LUO Haiwen, WEN Pengyu, University of Science and Technology Beijing, China
Effect of Aluminum on the Microstructure and Mechanical Properties in Hot-rolled Medium Manganese
Steels (P-04, cn-hmns2016-50-en)
SHAO Chengwei,HUI Weijun, ZHAO Xiaoli, ZHANG Yongjian, WENG Yuqing, Beijing Jiaotong University,
China
Evaluation of CaO-SiO2 Based Mold Flux for Medium Mn Steel (P-05, cn-hmns2016-40)
YANG Jie, CAI Zhaozhen, ZHU Miaoyong, Northeastern University, China
LI Yezhong, Anshan Iron and Steel Group Corporation, China
Research on Hot Deformation and Dynamic Recrystallization Behavior of Mn18Cr18N Steel (P-06, Z006#)
GAN Bin, ZHANG Mei, LI Haiyang, HOU Menglian, LI Lin, Shanghai University, China
Ultrafine Grained Multiphase Steels Fabricated Through Annealing of Tempered and Deformed
Martensite
(P-07, cn-hmns2016-158)
DING Ran, HE JianGuo, DAI Zongbiao, YANG Zhigang, ZHANG Chi, CHEN Hao, Tsinghua University, China
An Understanding on The Effect of Various Factors on Pro-eutectoid Ferrite and Pearlite Volume
Fractions in Hypo-eutectoid Steels (P-08, cn-hmns2016-150)
WU Hui-Dong, YANG Zhigang, ZHANG Chi, CHEN Hao, Tsinghua University, China
MIYAMOTO Goro, FURUHARA Tadashi, Tohoku University, Japan
The Plastic Deformation Behaviors of DP800 and DP1200 Under Different Strain Rates (P-11,
cn-hmns2016-51)
WEI Ran, SONG Renbo, JIANG Long, University of Science and Technology Beijing, China
CAI Hengjun, Ansteel Group Corporation, China
MicrostructureEvolution and Mechanical Properties of Advanced High Strength Steel for Automobile
under Ultra-fast Cooling with Different Aging Temperature (P-12, cn-hmns2016-54)
WANG Linweijie, SONG Renbo, ZHAO Zhengzhi, ZHANG Kai, University of Science and Technology Beijing,
China
CAI Hengjun, University of Science and Technology Beijing, China / Ansteel Group Corporation, China
The influence of fine microstructures on mechanical properties and formability of Ultra high strength
DP steel (P-13, cn-hmns2016-36)
XIONG Zi-liu, LIN Zhang-guo, Sun Li, LIU Hong-qiang, He Steel Group Technology Research Institute, China
Constitutive Relationship for AHSS Steels with Low Strain Level During Pure Bending Based on
Khan-Huang Model (P-14, cn-hmns2016-11)
WEI Xing, Wuhan Iron & Steel (Group) Corp (WISCO), China / Huazhong University of Science & Technology,
China
MO Jianhua, Huazhong University of Science & Technology, China
LIN Chenjiang, Wuhan Iron & Steel (Group) Corp (WISCO), China
The Research of Phase Transformation Rules at Different Al Content on Continuous Cooling Condition
of δ-TRIP Steel (P-16, cn-hmns2016-84)
ZHANG Chubo, MI Zhenli, University Science and Technology Beijing, China
Study on the Static Recrystallization Behavior of Ti-IF Steel in the Hot Deformation Process
(P-17, cn-hmns2016-130)
XIA Liangliang, ZHANG Guijie, Liu Quanyi, LI Kunkun, North China University of Science and Technology,
China
MA Chunhong, GAO Hua, Tangshan Iron & Steel Group Co. Ltd, China
Effects of the Annealing Time and Prior Microstructures on Cementite Spheroidization during
Subcritical Annealing of SCM435 Steel (P-21, cn-hmns2016-27)
QIU Musheng, HUANG Xueqi, TENG Huaxiang, Shougang Group, China
Ji Cheng, Northeastern University, China
The Experimental Investigation on Millipede Forming U-Profiled AHSS Products (P-22, cn-hmns2016-66)
CHEN Haibin, MI Zhenli, SU Lan, University Science and Technology, Beijing, China
DING Shichao, University of Queensland, Australia
Analysis of The Mechanism Obtaining High Strength and High Ductility in Fine 0.1%C-2%Si-5%Mn
Fine Ferrite+Austenite Steels by Synchrotron Radiation (P-24, W015#)
KUMAKURA Mia, TORIZUKA Shiro, ADACHI Iroki, HANAMURA Toshihiro, University of Hyogo, Japan
Effects of Aluminium on Austenite Stability and Mechanical Properties in Medium Manganese Steel
(P-26, Z021#)
XU Haifeng, Huazhong University of Science and Technology/ Central Iron and Steel Research Institute,
China
LI Jian, , Huazhong University of Science and Technology, China
CAO Wenquan, WANG Chang, DONG Han, Central Iron and Steel Research Institute, China
Reason Analysis on the Inner Wall Cracks of AISI 13300 Seamless Pipe (P-27, Z047#)
FAN Jian-wen, FENG Guang-hong, ZHANG Hong-liang, YU Gui-ling, Central Iron & Steel Institute, China
YU Xiang-hui,Qinghai Province Hydrogeology and Engineering Geology and Environmental Geology Survey
Institute, China
The Correlation Between Carbide and Surface Defects of Stainless Steel Wire Products (P-28, Z046#)
LU Hengchang, LIU Jianhui, XU Dexiang, DONG Han, East China Central Iron and Steel Research Institute,
China
Low-cycle and Extremely-low-cycle Fatigue Damage Mechanisms and Life of TWIP Alloys (P-29, Z051#)
SHAO C.W., ZHANG P., LIU R., ZHANG Z.J., PANG J.C. and ZHANG Z. F., Institute of Metal Research, Chinese
Academy of Sciences, China
Numerical Investigation of The Permanent Longitudinal Strain and Web-warping in Chain-die Formed
AHSS Variable Width Sections (P-31, hmns2016-75-cn)
SUN Yong, QIAN Zhen, DANIEL J.T William, MEEHAN Paul and DING Shichao, The University of Queensland,
Australia
SHI Lei, Baoshan Iron & Steel Co., LTD, China