Professional Documents
Culture Documents
How To Import Script in The BTS
How To Import Script in The BTS
Step.1 –
Firstly we should have to see the version of CC card. After then we have to use the appropriate type
Of LMT version to import the Script. Please follow the following procedure.
Step.2 –
After that you may get the Login icon. Enter the following
Username : zte
Password : zte
Step.3
II)
In case of cc>
Type VMP,
Step1.
BSC send the Script in XML format and at first you have change it into XLS format via same LMT.
Step.2- Open EOMS, You will get CMX-LMT Dialogue Box as below.
Step.3 – Click on … tab as shown above and give the location of the XLS file
Step.4
–After You click on the EXECUTE button You may get Success or Failure.
If you get success then you have to proceed on the next step i.e DATA VERIFY.
If you get failure like in the picture below then you have to go to the previous XLS file and Edit
Step.5
–Mostly at this initial phase you may get failure in Controlled Auxiliary Abinet No at PLUGIN UNIT
tab. At this column you may get the no. 256. Delete that no. and Save the excel sheet.
. Again do as like in Step. 3 &4, Now you will get Success as shown below.
Step.6
– After that you have to go to Data Verify and click on Verify Button. You may again get
Success or Failure. If you get Success than you can get picture as following and you can
proceed to the next Step i.e EXPORT DATA. You don’t need to go to DATA COMPARE.
If you get failure as in the following picture then click on the Exception Detail,You will
Get a discription below. See the Object MO & Exception Detail.
Step.7
– Now Click on the Edit button as shown in the above picture, automatically you will get an excel sheet.
In that Excel sheet, you have to search the Object MO in the below TAB. With reference to the above
error you have to go to the IpLayerConfig tab on the excel Sheet, go to the Vlan ID and Delete the
no.4294967296 and save the excel Sheet.
After Saving You have to click on the VERIFY button as shown in the pictures of Step.6 and you will get
Success. Similarly you may get failure in the Object MO. EnvMonDevice. Read the Exception Detail
nicely. You may have to delete one or more than one row shown on the following excel sheet and SAVE
it.
After saving, again go to verify and you will get success. If you get any other Failure and don’t able to
clear that then you may contact to the BSS Engineer. Now you can proceed to the next step EXPORT
DATA .
Step.8
– In Export Data you have to click on EXPORT TO LMT and then click on EXECUTE button.
Then you may get the following picture first and then the dialogue Box showing
will reboot for some time. You will have to wait for sometime(5-20 min) .After loading
If you click on any icon on the left hand side you will see the parameter in the right hand site.
In the above condition you are not able to change any parameters, you can just see the parameters.
To change any parameters you have to go through the excel file and proceed all the above steps Again.
Best of Luck
Thank YOU