Professional Documents
Culture Documents
Features &
TiTan single-stage pumps
available in capacities
Benefits
from 1.5 - 1,200 CFM
(0.25 - 100 HP) Maximum efficiency
No metal-to-metal contact
No internal bearings
Choice of materials
DEKKER support
www.dekkervacuum.com 888-925-5444
Figure 2:
LIQUID RING VACUUM PUMP A liquid ring is created by the centrifugal force
PRINCIPLE OF OPERATION generated by the rotating impeller. This force
holds the liquid ring against the inner wall of the
pumping chamber. Since the impeller is located
eccentric to the pumping chamber, the depth of
entry of the blades into the liquid ring decreases
and increases as the impeller rotates. This cre-
Figure 1: ates increasing impeller cell volume on the inlet
In a cylindrical housing, partially port side, creating a vacuum. On the discharge
filled with sealing liquid, a multi-blade port side, the impeller cell volume decreases as
impeller on a shaft is positioned the blades move further into the liquid ring
eccentrically. Port plates with inlet increasing the pressure until discharge takes
and discharge openings are positioned place through the discharge port. A continuous
on either side of the impeller. flow of fresh sealing liquid is supplied to the
pump via the sealing liquid inlet.
High efficiency single-stage liquid ring vacuum Oil-sealed liquid ring vacuum pump systems: The
pumps: from 1.5 - 1200 CFM (0.25 - 100 HP) only system on the market with a full 3-year
Two-stage liquid ring vacuum pumps: warranty. Vmax-systems feature the patented DX-5
from 15 - 2000 CFM (2 - 125 HP) and DX-7 separators and are available in capacities
Liquid ring compressors: from 20 - 5000 CFM, in both air- and water-cooled
from 15 - 1100 CFM (3 -150 HP) designs.
All models have standard mechanical shaft seals and are New Variable Frequency Drive optional.
available in a variety of materials.
K
Large capacity single-stage liquid ring vacuum Water-sealed liquid ring vacuum pump systems:
pumps cover a capacity range from 1050 - 18,000 packages using water as the seal-liquid, designed for
CFM, with vacuum capability up to 29" Hg. Models no recovery (NR), partial recovery (PR), or full
are available with packed stuffing box or mechanical recovery(FR).
seals. A variety of materials and special coatings are AquaSealPOWERGEN condenser-exhauster systems:
available. full-recovery 2-stage packages for the power industry
in capacities from 9 - 25 SCFM at 1" Hg.
Lubricated rotary vane vacuum pumps: Liquid ring vacuum pump systems for solvent
from 2 - 710 CFM (0.2 - 40 HP) recovery: these are full recovery (FR) packages
Lubricated rotary vane vacuum pumps for using a variety of liquids such as solvents, water or
saturated air (wet) service: chemicals as the sealing liquid.
from 19 - 70 CFM (1.25 - 4 HP)
Oil- free (dry) rotary vane vacuum pumps:
from 2-100 CFM (0.25 - 7.5 HP)