You are on page 1of 2
The Carpenter's Workplace Date. Score 1. Which of the following are valid reasons for the carpenter to “do 1 the job right the first time”? It reduces the amount of warranty work for the contractor. It avoids lawsuits. It maximizes the contractor's profit margin. The worker avoids damaging his or her reputation. Allof the above. None of the above. MOS > 2. True or False? A high level of skill in a beginning carpenter is not 2. always the most valued quality, according to contractors. 3. of the Civil Rights Act of 1964 protects both men and 3. ‘women from sexual harassment, D4. Hueco Fatse? Sexual harassment involves only improper contact 4 between two workers of the opposite sex, 5, Safety is based on and an attitude of ___and 5. 6. Shoes with ____soles should never be used in carpentry; they 6. have poor traction on smooth surfaces. 7. Standard specifications for safety glass lenses state that the eee lenses must withstand the impact of a__. A. 1/16" diameter ball dropped from a height of 30° B. blow from a 16 oz. hammer C. 1/8” diameter ball dropped from a height of 50” D. 1” diameter ball dropped from a height of 30” 8. Hard hats must be able to resist breaking from the force of an_ 8. ____ dropped from a height of __. A. 8 Ib. ball; 50” B. 801b, ball; 5° C. 800z. ball; 5’ i) D. 1/8" diameter steel ball; 50” 9. In carpentry, housekeeping refers to the the construction site. and good order of 9 Copysight by Goodheart ox Co, ne. u 12. Modern Carpentry Workbook 10. ‘True or False? Excavations can be safely entered if the sides are sloped to their angle of repose. 11, Scaffolds should be inspected every for safe conditions. A. week B. day C. time erected D. month 12. An acceptable guardrail has a top rail strong enough to support a 1b, load and is at a height of about 13. Pressure-treated lumber requires ___care in handling, A. no additional B. special C. little 14. Carpenters must have a good understanding of fire protection and control. For example, they should know that special methods must be used to control fires caused by electrical wiring, or equipment. This type of fire is referred to asa A. Class A B. Class B C. Class C D. None of the above. 15. Look at the illustration below and list the safety measures the person is taking. 10. uw 13. 4. 15. gO e> Copycight by Goodhens Wile Co, ne

You might also like