The document reports the results of three laboratory analyses (Series 1, 2, and 3) that measured the deformation, effective stress, and porosity of samples at increasing levels of stress. Each series involved three samples (labeled I, II, and III) that were subjected to stresses from 0-10 kg/cm2 in increments of 0.05-1 kg/cm2. The analyses recorded the deformation percentage, effective stress in kg/cm2, and porosity in kg/cm2 at each stress level for each sample.
The document reports the results of three laboratory analyses (Series 1, 2, and 3) that measured the deformation, effective stress, and porosity of samples at increasing levels of stress. Each series involved three samples (labeled I, II, and III) that were subjected to stresses from 0-10 kg/cm2 in increments of 0.05-1 kg/cm2. The analyses recorded the deformation percentage, effective stress in kg/cm2, and porosity in kg/cm2 at each stress level for each sample.
The document reports the results of three laboratory analyses (Series 1, 2, and 3) that measured the deformation, effective stress, and porosity of samples at increasing levels of stress. Each series involved three samples (labeled I, II, and III) that were subjected to stresses from 0-10 kg/cm2 in increments of 0.05-1 kg/cm2. The analyses recorded the deformation percentage, effective stress in kg/cm2, and porosity in kg/cm2 at each stress level for each sample.