Professional Documents
Culture Documents
HOBIE.COM
LIFE VESTS / PFD
LIFE VESTS
& PFDs
FEATURES:
Thin back design works with all seat styles; Graded Sizing provides the best
possible fit; Open sides for ventilation; Cross-chest cinch harness for zero ride-up;
Mesh shoulders & interior panels for maximum ventilation; Adjustable shoulders,
and dual forward pulls for a custom fit; Zippered front pockets offer organization;
Built-in beverage holder and neoprene sunglasses sleeve; Entry grip tab at zipper
base; #10 YKK zipper with non-corroding slider; Lightweight PE Foam; Type III PFD
with sea level buoyancy: MD: 16 lbs, 8oz / LG: 17 lbs / XL: 17 lbs, 8oz
CONSTRUCTION: SIZING:
• Mini Ripstop nylon outer shell MEN’S WOMEN’S
• 200 denier oxford liner
SIZE CHEST SIZE CHEST
• USCG approved
MD 30” - 40” SM 28” - 34” S6101xx (xx = size) RED S6102xx (xx = size) GREEN
LG 40” - 46” MD 34” - 40”
XL 46” - 52” LG 40” - 46”
SIZING
SIZE CHEST
SMD 33” - 39” 16g YELLOW
16g BLUE
24g RED
CONSTRUCTION:
• Mini Ripstop nylon outer shell
HOBIE INFANT/CHILD/YOUTH VESTS
These are easy to adjust for different small sized crews.
• 200 denier oxford liner
• USCG approved (Lime Green)
S6771CLG LIME 30-50#
SAFETY TIP S6771ILG LIME <30#
LIFE VESTS: Get a good, comfortable life vest and WEAR IT! A life vest does you
little good stored on your boat, especially if you get tossed into the water and
away from your boat. Accidents happen and by their nature, they happen when S6771YLG LIME 50-90#
you are not prepared. A life vest can keep you afloat until you can rescue yourself
or you can be rescued by others. In the worst cases when injuries or cold water
are involved, your life vest can make all the difference! Be sure everyone onboard
your boat wears a life vest too! Pass the word! Federal law now requires that all
persons below the age of 13 must wear a life jacket while aboard a boat.
HOBIE.COM 3
MIRAGEDRIVE®
MIRAGEDRIVE
Hobie
MirageDrive 180
HOBIE MIRAGEDRIVE
81189001 MIRAGEDRIVE 180 - ST FINS
81189101 MIRAGEDRIVE 180i- ST FINS iSeries
81188001 MIRAGEDRIVE 180 - ST TURBO FINS
HOBIE MULTI-LUBE
A planet-safe lubricant recommended for lubricating
MirageDrives and many other uses. Environmentally
friendly for in-the-water applications. Hobie Multi-Lube
offers excellent lubrication, is an anti corrosive coating,
great for cleaning and many other uses... use on nearly
anything that squeaks, rusts, corrodes or binds up;
MirageDrives, rudder drums, cams, fishing reels and
more. The 1 oz size is perfect for getting the lubricant
into tight spaces by using the needle applicator. The
4 oz size has a spray applicator for coating chains and
larger surfaces, shafts and bulky parts. Every Hobie
owner should have Hobie Multi-Lube. Be nice to our
planet, keep MirageDrives and other components
running smoothly and lasting longer without polluting
our waterways. Use it for all shop, home and sport
lubrication needs.
5120 HOBIE MULTI LUBE 1 OZ
5121 HOBIE MULTI LUBE 4 OZ
Want to go really fast? Add TURBOs. Hobie Mirage kayak users report as
much as 10% increase in speed and more using TURBO Fins. But its not all
about speed, you can get top end speed and a slower cadence for cruising
(Less pedals per mile). All achieved with these larger and more efficient fin
designs. These longer fins can also increase lateral resistance for sailing
upwind.
HOBIE.COM 5
SAILING
Add the large rudder #81397001 for more responsive rudder control. Adventure /
Revolution 16 models can add the dagger board for enhanced upwind performance.
HOBIE GLOVES
Protect your hands while increasing your grip strength. Gloves add grip
strength on lines which can ease up on the amount of force you need to
exert. Available in small, medium, large & extra-large. (xx = size)
3188xx HOBIE GLOVE
81397001
81397101 for use
on i-Series, Quest
RUDDERS
81397001 LG RUDDER BLADE
81397101 LG RUDDER BLADE/QUEST i-Series
79502001 DAGGERBOARD
RONSTAN GLOVES
Double thickness palm and fingers for protection and grip. Mesh panels
for flexibility, comfort and quick drying. Low cut neoprene wrist band.
Sticky gloves reduce fatigue by minimizing the physical effort required
to hold ropes. (xx = size XS/SM/MD/LG/XL)
RF4851xx Three Finger Glove
RF4850xx Short Finger Glove
SAILING TIP!
SAIL POWER: Watch the sail, pay close attention to the trim or adjustment of
AIR-FLOW TELS the sail. When the front of the sail, just behind the mast, luffs or flutters in the
Trim your sails for optimum performance. Attached air flow over sails is breeze, you lose power. To start moving, pull the sail in just enough to stop the
critical. Air flow directions are indicated by these tell tails. Made of light sail from luffing or turn the boat away from the direction the wind is coming
weight rip stop nylon (Red / Green). Attaches to sails with waterproof from. There are also short ribbons hanging on either side of the sail called "tell
adhesive disks. tails". The tell tails react to air flowing over the sail and will help you see that the
334 SET OF 14 sail is pulled in too tight or too loosely. If you pull the sail too tight you will stall
the sail power. The tell tail on the back side of the sail will drop or do circles.
Ease the sail out until it luffs, then pull it in just a little until it stops luffing. You
will adjust the trim whenever the wind changes direction or you change course.
HOBIE.COM 7
ISLAND SPINNAKERS / MAST HEAD WIND VANE
Note: Spinnaker sailing can be challenging and may not be for the
novice sailor. We strongly suggest learning to sail your spinnaker in light winds. Once
you learn how to handle a spinnaker... You are going to LOVE IT! Spinnakers add a whole new
dimension to your sailing experience.
HOBIE.COM 9
SIDEKICK
The SideKick’s cross arms adjust the float height with a simple “click-twist-click”. Just like a
paddle shaft adjustment. Three positions offer you high - medium - low positions. Set the
floats high for cruising (less drag) or secondary stability. Use the medium or low settings for
primary stability (less initial roll). Fine adjustments for float height are done by twisting the
main crossbar within its mounts and tensioning with the fastening hardware.
Set up and use right off the beach or disassemble and deflate to store inside the hull. Then
assemble and inflate when you get to your dive or fishing spot. Inflation is simple. Just blow
a few breaths into each float through their one-way valves. Valve cap unscrews for rapid
deflation. Installs with 4 bolts using expanding nuts. Not for use on Pro Angler models.
HOBIE DODGER
The Hobie Dodger is a spray, cool breeze or sun shade for your lower body.
Deflect bow spray, block cool breezes and stay warmer in cold conditions.
Works like a small pop-up tent. Loops of bungee connect to the boat via
small fittings installed along the rails. The entire dodger folds forward
to enter or exit the kayak, to make pedal adjustments or reach items in
the cockpit. An access panel is built-in for using the sailing rig. A great
combination when there is wind and spray!
Great for hunters, animal and bird watchers as the Dodger conceals your
legs movement. The Hobie Dodger makes your kayak a sit-inside sit-on-top!
Installs in minutes initially, but installs in moments once the fasteners are in
place. Packs away into a small stow bag 5” round by 24” long (1.8 lbs).
Mirage Dodger Fits the Hobie Mirage Outback, Sport, Adventure and
Revolution kayaks (May fit other models with some modification to
hardware placement).
MIRAGE SEAT PAD
INFLATABLE “I-COMFORT”
Replaces the older style standard foam seat pad for the Hobie Mirage.
Adjust the cushion by adding or releasing air pressure. Not designed
for use on Hobie Mirage Inflatable kayaks. Can be used in combination
(stacked) on a seat cushion.
72020028 MIRAGE SEAT PAD – INFLATABLE “i-Comfort”
Includes knob,
attachment bolt
and cap
74050001 74051001
HOBIE.COM 11
HATCH LINERS / GEAR BUCKETS /
STORAGE TRAYS
OUTBACK
3 PACK
HOBIE GEAR BUCKET
Add a drop-in "tackle box" to your 8" Hobie Twist and Seal hatch. The
Gear Bucket containers are 2 1/2" deep and hang on the hatch lip or can
be slipped down into the hull so you can carry several. Keep one on the
hatch lip for easy access. Easily size-adjustable storage segments. Get
the three pack with handy storage bag and pre-pack your fishing tackle
for fishing different species.
72020111
HOBIE SMALL
HOBIE RECTANGULAR ROLL TOP DRY BAG
8” diameter x 14”. This dry bag is built of tough
HATCH ACCESSORIES materials. Seals tight to keep your stuff dry.
Add a drop-in “storage box” to your Hobie rectangular hatch or tackle
71703001 8” HOBIE DRY BAG
management tray that deploys two tackle boxes as you open the hatch.
71709001 HOBIE RECTANGULAR BUCKET
71708001 HOBIE TACKLE MANAGEMENT
Some hatch locations may not allow
VIEW DRY BAG
Transparent 13 oz. vinyl bags make quick
bucket use due to hull depth
work of locating things. Its cylindrical shape
will hold various shapes such as clothing,
cameras, binoculars, lunches, etc. without
GUSSETED STOW BAG distortion of bag and resultant potential
6” by 12” gusseted bag has hooks on both ends to clip to your boat. leakage. Air purge vent.
Also available in 8” x 15” size. Securely stow tools, gloves or small parts 72210L VIEW VENTED (10L)
for easy access.
72000B 6”x12” GUSSETED STOW BAG 72230L VIEW VENTED (30L)
72005B 8”x15” GUSSETED STOW BAG
HOBIE.COM 13
TRANSPORTATION
KAYAK CARTS
Kayak Carts or Dollies are a must for easily transporting your kayak
from car to water’s edge. Simply roll the kayak down to the water
and off you go! All of the latest Hobie Kayaks can use “Plug-in” carts.
“Plug-in” carts do just that...they plug right into the bottom of your
kayak. Choose Standard for light duty and solid surfaces, Heavy Duty
for heavy loads and rough terrain or the “all-terrain” Hobie Trax
“2” version which is the best over soft sand. Each cart has a sturdy
stainless steel frame. Some older models, i-series or other brands of
kayaks may require the use of a different type of cart.
• Collapsible frame
KAYAK CART “I-SERIES”
Plugs into the bottom of the inflatable series kayak’s MirageDrive well. Stainless steel frame. Wheels are easily removable for storage. Standard
is Light weight with durable 26 cm tires and strong spoked wheels. This cart has the medium capacity. (150 lb Capacity). Great for transport over
solid surfaces. Trax is designed for surfaces such as sand or pebbles.
KAYAK CART C-TUG
Carries up to 80kg (170lbs), dismantles for easy stowing, won’t rust. Requires no
tools and assembles in seconds. Dismantles in seconds, allowing you to stow it
in your kayak hatch. Made of non-corroding engineering polymers, with stainless
steel reinforced axles, this cart is designed for harder terrains.
80047201 C-TUG CART
*Note Tandem Island use issue. Plug in carts are not CAUTIONS
recommended for the Tandem Island due to weight.
Be certain that the cart inserts clear through the kayak and protrudes
Using a plug in cart can damage the scuppers or deck into the cockpit / cargo area surface. Kayaks should never be left on
area in the hull. carts for prolonged periods of time.
HOBIE.COM 15
TRANSPORTATION
80046200 AI/TI DOLLY - WITH BEACH WHEELS 80046100 AI/TI DOLLY - WITH TUFF TIRES
80046201 PA/UNI - WITH BEACH WHEELS 80046101 PA/UNI - WITH TUFF TIRES
80046202 PA17 - WITH BEACH WHEELS 80046102 PA17 - WITH TUFF TIRES
(72061001 Replacement wheel retainer pin) (72061001 Replacement wheel retainer pin)
LOADING
1. The handle helps you 2. Lift the bow and slide the 3. Leave the handle in place 4. Adjustable strap included
get the cart down to the cart under. while moving the boat. to secure the boat onto
boat. Handle is also easily the cart.
removable for cart storage.
38652210 TOWER
Add the optional tower for equipment box mounting on a double trailer, multi *
kayak transport (Up to 4 kayaks leaned against tower). Also includes two mast
carriers for 2x AI/TI configuration. NOTE: Loads may require a red warning
Trailer prices DO NOT include freight to dealer or assembly costs. flag if over hanging lights by over 4 feet.
* Refer to cradle
* instructions for
CRADLES proper spacing or
67” on all others
HOBIE.COM 17
TRANSPORTATION
HOBIE TIE DOWN STRAPS
Rack tie-down straps, made of durable black
polypropylene webbing. Diagonal cut and ironed ends
make threading ends into buckles easier.
72042001 TIE DOWNS 12’ (Pair)
72043001 TIE DOWNS 15’ (Pair)
LOADING ACCESSORIES
Load a kayak on to your vehicle without having to lift the full weight.
Perfect for loading up solo or for car topping heavier boats.
Be sure to tie down your load once it is safely on the crossbars using
load rated fastening straps.
FEATURES INCLUDE:
Push button for quick release and easy storage; Crossbar clamps to suit all
popular roof racks; Heavy duty storage bag; Support pole for loads greater than
44lbs (up to 132lbs); Integrated load stop prevents load from sliding off bar;
foam padding for protection of your gear; Padding on the underside of clamps
to protect vehicle roof; Fits all Rhino Aero, HD/Euro, all Thule Square, Aero bar &
Wingbar, Rola, Prorack and Whispbar
Watch Our
Video
Important Note: Designed to fit Rhino roof rack systems with bar overhang
with at least 100mm. Contact Rhino for other rack Mfg compatibility.
HOBIE.COM 19
STORAGE / COVERS
KAYAK COVERS
Easy to install or remove, fits over the hull (like a fitted sheet on a
mattress). Straps and pull string adjust for a tighter fit. Cross straps
secure the cover on your hull for windy conditions. Heavy duty UV
resistant canvas material in a neutral color for better aging. Universal
covers fit over the hull when upright or upside down. To help prevent
distortions to the hull bottom shape, Hobie recommends that our
kayak hulls be stored upside down resting on the cockpit rails. This
is also best for deflecting rainwater and prevents water pooling in
the cockpit or on the cover. When planning to store a hull upright, be
sure to properly support the hull bottom to prevent hull distortions.
Universal fit covers may not entirely cover some hulls, especially with
accessories installed.
CINCH STRAPS
72055 Kayak Cover PA14 Custom
DRAW STRING
72050 Kayak Cover / 9'-12' 6” x 49” 72056 Kayak Cover PA12 Custom
(Lanai, Maui, Sport, Revolution 11, Compass, Outback <=2018,
Kona-Tight, Quest 11) 72055 Kayak Cover PA14 Custom
72051 Kayak Cover / 12'-15' x 49” 72057 Kayak Cover PA17 Custom
(Kona [Loose], Pursuit, Mirage Classic, Tandem, Oasis, Outfitter,
Quest 13, Outback, Revolution 13) ISLAND CUSTOM FIT COVERS:
72052 Kayak Cover / 14'-16' x 55” 72058 Kayak Cover AI Custom 2015+
(Adventure, Revolution 16, Tandem, Oasis, Odyssey)
72059 Kayak Cover TI Custom 2015+
72053 Kayak Cover / 14'-16' 6" x 76”
(Wide - Pre-2015 Adventure Island with amas folded against hull and
newer style rudder removed)
RUDDER COVER
ONE WRAP VELCRO® ISLAND / TI
Rudder protection for 2011+’ AI and all
Cut this double faced Velcro® product to
Tandem Island Rudders.
length and wrap it around items, line or
82420001 RUDDER COVER ISLAND / TI
whatever you need to secure. One side
is hook and the other a loop, so a single
piece is all you need.
7904 ONE WRAP, PER FOOT
HOBIE.COM 21
HOBIE evolve v2
The evolve offers increased battery capacity, longer range and solar charge / run
capability. Includes well mounted drive for all Mirage Kayaks and optional Twist and
Stow rudder attachment for (most) non-inflatable models.
KIT INCLUDES:
Ready-to-go Mirage well-mounted Hobie evolve v2; All cables for the motor and
throttle units; All mounting hardware; Assembly that integrates the motor with a
Twist and Stow rudder*; Sealed/Waterproof Lithium-Manganese high-performance
battery; 320 Wh (charger included); Remote throttle system displays speed and
distance information generated by an onboard GPS unit; Magnetic safety key;
Waterproof fittings and cable connectors; Solar charging port; Corrosion-resistant
materials ensure durability and performance; Lightweight power: Total weight of
installed kit is 18 lbs (8.16 kg) or less, depending on the configuration.
#1 CHOOSE A TROLLING MOTOR... We chose a 50” shaft specifically for Hobie Pro Angler 17T. See the motor head for
directional control when seated while keeping the motor depth optimal. Longer
shafts can either catch on over hanging trees or be too deep in the water. Too
short and the motor head is not visible over your PA17 crew.
Custom 50” shaft INCLUDES WIRELESS CONTROL RIGHT OUT OF THE BOX,
length to best fit
DURABLE AND RELIABLE, PRECISE STEERING AND CONTROL,
your Hobie!
AND VERY QUIET ON THE WATER.
Key Features:
• Anchor Hold
- Hold position with a touch of a button, no matter how deep
- “Jog” in precise increments from an anchor point using directional arrows
- Save/recall 8 locations
72020120 • Heading Lock
TROLLING MOTOR - Maintains compass heading navigation
Xi5
50” • Routes
FRESH - Record/recall 8 routes of up to 4 miles each
12v - Virtually unlimited route record/recall when connected to certain
55FW Lowrance fishfinders
GPS and Sonar • Cruise Control
- Maintain a GPS speed while navigating
HOBIE.COM 23
HOBIE LIVEWELL
LIVEWELL
Liven up your day on the water
with the Hobie Livewell!
HOBIE LIVEWELL V2
The newly redesigned Hobie Livewell sports a fresh
color scheme, modern lines and more built-in
features than ever before. This livewell is plug-
and-play with most Hobie kayaks and includes: (1)
6V sealed gel cell battery + charger for powering
the pump, an adjustable downspout for filling the
tank half way, a corrosion resistant power switch, 3
integrated rod holders, a threaded drain plug, easily
removable tank partitions for keeping bait healthy, an
8” Twist and Seal hatch for access and bait concealment, heavy-duty straps for
attaching it to the kayak and a carrying handle for easy transport.
FEATURES
High output pump circulates aerated water to keep bait alive, Battery
and Charger included, Sealed Marine Switch for ON/OFF control,
Adjustable downspout for water level control and drainage, Holds up
to 8 gallons of water, Removable tank partition provides a rounded
surface for keeping bait healthy, 3 vertical rod holders included,
with pre-marked locations for adding more, 8” Twist and Seal lid for
tank access & bait concealment, Carrying handle for easy transport,
Heavy Duty straps secure livewell to cargo area, Pump cap for filling
the tank with non-circulating water, Threaded drain plug keeps tank
interior dry between uses
HOBIE LIVEWELL XL
Larger capacity, fits all Pro Angler models. 6 gal/22.71 L and 11 gal/41.64 L
TANK WATER LEVEL CONTROL
72020072 HOBIE LIVEWELL XL BAIT TANK Adjust the Livewell XL tank water
72020015 ROD HOLDER - LIVEWELL level using the included “C-clip” or
(Additional rod holders include the required fasteners) drain the tank with the simple twist
of a knob.
The Livewell XL comes standard with two
additional rod holders for a total of four
rod holders.
HOBIE.COM 25
HOBIE H-BAR / DECK PAD SETS
ADJUSTABLE H-BARS
Standing support for Kayaks! The adjustable H-Bar will integrate with
all H-Rail accessories for easy customization. It folds up when you need
it and away when you don’t. The aluminum extrusion is strong and
lightweight for leaning against or holding on to while entering/exiting
the boat or pulling yourself up from a seated to a standing position. The
Outback Universal kit is fully adjustable to fit a wide variety of kayaks.
The PA17 requires an adapter kit (extra set of H-Rail clamps and a longer
center bar) when used in the middle and aft seat positions.
H-RAIL EXTRUSION
Integrates with all H-Rail
accessories, like rod
holder mounts, for easy
customization.
WEIGHT
4.5 lb / 2.04 kg
INCLUDES
Mounts
Hardware
ADJUSTABLE
Four telescoping legs,
along with foot-mount
placement, enable a wide
range of height settings.
PRO ANGLER 12 INTERIOR COMPASS COMPLETE
72020247 GREEN/ESPRESSO 72020259 GREY/CHARCOAL
72020248 AEGEAN/BLUE
72020249 GREY/CHARCOAL
PA12 PA14 COMPASS
AEGEAN/BLUE GREEN/ESPRESSO GREY/CHARCOAL
H-CRATE
SOFT COVERS
Vinyl cover with a zipper opening.
Keeps gear drier and out of UV.
Keeps gear in the crate from
falling out in a capsize. Tested to
extremes… the cover holds in place
under heavy load even if inverted or
tumbled. Easy to install using provided
panel rivets. Double zipper is nylon, not
corrosive and functions very smoothly. H-RAIL UPGRADE / ADD-ON KITS
72020097 SOFT COVER H-Rail is a durable, lightweight, patent pending mounting system for
72020297 JR SOFT COVER quickly securing a complete line of H-Rail accessories. Easily attach,
move or remove mounts and accessories quickly. The 12-Sided rails
allow rotation at 30 degree increments and will hold when your H-Rail
accessory is clamped in place. Get your FishFinder, Rod Holders, Tackle
MOUNT ADDITIONAL ROD Buckets and more... right where you want them... then easily slide them
out of the way!
HOLDERS TO H-CRATE
You can mount many additional rod holders to
Update older model Pro Angler 12 and 14s to the H-Rail system. Fits
the grid walls.
2014 and some 2013 Pro Anglers. Other models may require some
72020015 ROD HOLDER - LIVEWELL
modification to steering crank (Note four screws in deck area near
(Additional rod holders include the required fasteners) left steering handle indicates need for modifications). Kits include
everything needed: Rails, mounts, attachment hardware and instructions.
Instructional video also online.
84625312 PA 12 H-RAIL UPGRADE KIT
84625314 PA 14 H-RAIL UPGRADE KIT
PADEYE XL
Replace existing smaller padeyes to enable For other kayaks or for just about any application add 9” and 21” straight
attachment of multiple straps or rod leashes H-Rails anywhere you like! Kits come with H-Rail tubes, end fittings and
on the same eye. attachment hardware.
71125001 PADEYE XL 84626001 H-RAIL BOLT ON RAIL KIT 9”
84626101 H-RAIL BOLT ON RAIL KIT 21”
HOBIE.COM 27
HOBIE H-RAIL ACCESSORIES
H-RAIL
TACKLE BIN
HOBIE Add more storage
or hold more gear.
H-RAIL G-HOLD
Secure paddles, push poles, nets, gaffs or anything
of moderate size up to 2 inches in diameter. The
H-RAIL RB MINIPORT flexible quick-release strap has two securing points
The Hobie H-Rail MiniPort allows users to fit and for security of minimum and maximum diameters,
re-task the full range of RAILBLAZA accessories providing strong retention. It clamps to the
to Hobie H-Rails. It clamps to the 12-sided H-Rail 12-sided H-Rail without any drilling or tools needed.
without any drilling or tools needed. 84620200 H-RAIL G-HOLD
84620202 H-RAIL MINIPORT
HOBIE.COM 29
RAM RODHOLDERS / MOUNTS
RAM
The revolutionary universal ball and socket mounting system that allows you to mount practically anything anywhere.
72023051 RAM TUBE 2008 72023049 RAM TUBE 72023050 RAM ROD 2000 72023048 RAM ROD 2007 JR.
ROD HOLDER 1.5 BALL JR HOLDER 1.5 BALL ROD HOLDER 1.5 BALL FLY ROD HOLDER 1.5 BALL
ADD CAMERA
ADAPTER BALL 72023035
Fits 1" Ball
72023034 RAM GOPRO
MOUNTING BASE 1” BALL
RAM TRANSDUCER
ARM MOUNT Compatible
with all transducers which attach
using a 1/4” bolt. An 18” rigid
aluminum rod can be bent to
position your transducer to its
optimum location. Patented socket
72023033 technology allows for quick raising,
RAM SMALL ROUND BASE lowering, removal and stowage of
1/4”-20 transducer arm. Transducer not
1” BALL included with purchase.
HOBIE.COM 31
ROD HOLDERS / MOUNTS
RAILBLAZA
Diverse, flexible and user-friendly mounting systems and accessories. Your StarPortTM can be mounted just about anywhere! Then
add the desired accessories to mount onto the starport
STARPORT STARPORT HD
The StarPort allows users to fit and re-task The base combines the strength of a deck
the full range of RAILBLAZA accessories. The mount with the cosmetic appeal and practicality
StarPort can be used as either a deck mount of a flush mount. The StarPort HD can also
or flush mount base. This base not only comes be mounted on many popular track systems.
with a gasket and cap, but also features a slide Versatility of tool-free adjustment. Stainless Steel
locking mechanism to confidently lock the mounting hardware included. Want a tool-free and
RAILBLAZA accessory in place. Stainless Steel centrally mounted lockable mount on your kayak track? The
mounting hardware included. StarPort HD can achieve this with the addition of the StarPort HD
72026207 RB STARPORT BLACK TracMount Kit 72026212.
72026208 RB STARPORT HD BLACK
MINIPORT TRACMOUNT
The RAILBLAZA MiniPort TracMount is designed to fit H-RAIL READY!
industry standard gear tracks, and installs without
tools. Re-positioning the MiniPort along the track is H-RAIL STARPORT HD
as simple as turning counter-clockwise to release the Mount the Hobie H-Rail StarPort HD on
tension, sliding into the desired position and turning the 12-sided H-Rail without any drilling or
clockwise to secure the mount. NOTE: All single mount track tools needed.
bases are designed for use in light duty applications, and must 84620204 H-RAIL STARPORT HD
be mounted on the starboard side if used with trolling.
72026213 RB MINIPORT TRACMOUNT
H-RAIL MINIPORT
Mount the Hobie H-Rail MiniPort on the
FIXED EXTENDER 12-sided H-Rail without any drilling or
The Fixed Extender gives you 5 inches of clearance from the tools needed.
StarPort – an optimum distance for freeing up the cockpit and 84620202 H-RAIL MINIPORT
creating additional leg room on kayaks.
72026211 RB 5” FIXED EXTENDER
H-RAIL G-HOLD
Secure paddles, push poles, nets, gaffs or
anything of moderate size up to 2 inches in
AKA STARPORT MOUNT diameter. The flexible quick-release strap has
two securing points for security of minimum and
AKA StarPort Mounts allow the easy attachment of
a RAILBLAZA StarPort to your Hobie AKA (V2). The maximum diameters, providing strong retention.
StarPort Mount is designed to fit securely on the AKA It clamps to the 12-sided H-Rail without any
of an Island or Tandem Island without twisting. drilling or tools needed.
72026210 RB RAILMNT AKA STARPORT COMB 84620200 H-RAIL G-HOLD
ROD HOLDER II
Hold a bait caster, spinning rod, trolling rod, or fly
rod. The rotating collar secures rod in place and the
rear gimbal lock reduces rod rotation for compatible
rods. Also offered with the StarPort HD mount
(Stainless Steel mounting hardware included with
72026209 Rod Holder II / StarPort HD).
72026200 RB ROD HOLDER II ONLY BLACK
72026209 RB ROD HOLDER II WITH STARPORT HD
VISIBILITY KIT II
G-HOLD 50 The RAILBLAZA Visibility Kit II is a
must-have safety item for any kayak
The G-Hold 50 is recommended to secure paddles,
angler or recreational paddler. The
boga grips and anything of moderate size up to 2
Visibility Kit II meets US Coast Guard 2
inches around. The flexible quick-release strap has
Nautical Mile regulations, and disassembles
two securing points for security of minimum and
when you’re finished to be stored just about
maximum diameters, providing strong retention.
anywhere. The i360 light portion can be
G-Holds install in any RAILBLAZA base.
fitted to any RAILBLAZA StarPort around the kayak. The Extenda Pole
72026202 RB G-HOLD 50MM(2”) SINGLE BLK
1000 portion can be used to display a flag, or combine with RAILBLAZA
camera mounts as a camera pole.
GUNHOLD 72026214 RB VISIBILITY KIT II
The RAILBLAZA GunHold allows you to safely stow
and transport your rifle or shotgun. The flexible
rubber fingers shape to fit different gun butts and
CAMERA BOOM 600
The Camera Boom 600 is the perfect way to hold the camera
the strap secures the shotgun/rifle against vibration
and capture the action. Capturing your adventure from the
and damage. The GunHold is compatible with all
perfect angle is now made easy. Over 30 inches long and
RAILBLAZA Bases and can be used on ATVs, kayaks,
fully adjustable with 4 moving joints, capturing any angle
boats, SUPs, and all other hunting vessels.
is possible. This camera mount will fit into any RAILBLAZA
72026203 RB GUNHOLD (EA)
StarPort.
72026204 RB CAMERABOOM 600 PRO SERIES
HOBIE.COM 33
ROD HOLDERS / MOUNTS
SCOTTY
Innovative designs and many versatile mounting options, we’re sure you’ll find the exact combination you’re looking
for. Scotty Rod holders were designed with one major purpose in mind: Fight the fish, not the fishing gear!
BAIT CASTER
Holds a bait caster reel in a cushioned cradle. A slot in the front
of the rod holder allows for a spinning reel to be securely held
in position. The rod holder design has a side mounted flange,
which leaves the bottom open. This allows for the rod holder
to accommodate trigger grips. Pistol grip rod butts easily clear
the sides of the rod holder for quick rod retrieval. Rod can be
secured in holder with a soft latching strap which snaps over the
top. Mount not included.
80048011 BAIT CASTER ROD HOLDER
72020051
72020052
RODMASTER II
Fibre reinforced engineering nylon offers strength, resilience MIGHTYMOUNT™
and reliability. Also comes with a removable gimbal pin. Use it to attach your track mounted accessories. Use it as a standalone
Mount not included. mount to secure your VISICarbon Pro™. Use it with the brand new
80048014 ROD HOLDER RODMASTER II Screwball™ or the Panfish™ camera pole.
72020051 W/ MOUNT HDWR
72020052 SCOTTY KIT W/HDWR
HUNTING
GUN MOUNT for your kayak.
Mounts to kayak rail for easy access.
72020013 GUN MOUNT
GUNHOLD
The RAILBLAZA GunHold allows you to safely stow
and transport your rifle or shotgun. The flexible
rubber fingers shape to fit different gun butts and
the strap secures the shotgun/rifle against vibration
and damage. The GunHold is compatible with all
RAILBLAZA Bases and can be used on ATVs, kayaks,
boats, SUPs, and all other hunting vessels.
72026203 RB GUNHOLD (EA)
Choose an appropriate RailBlaza base Page 32-33
HOBIE.COM 35
ANCHOR ACCESSORIES
ANCHOR KIT
3.5 pound folding anchor, bag and 60 feet of line. (Connect to the Hobie
Anchor Trolley System for best results)
80035A ANCHOR
POWER-POLE
Fast and secure anshoring for Hobie
Pro Angler, Outback and Compass;
Power-pole, mount and power supply!
Easy as... 1 - 2 - 3!
or ...
HOBIE.COM 37
ELECTRONICS / MOUNTS
Warranty on Lowrance product is handled by Lowrance: https://www.lowrance.com/help-and-support/warranty-information/
Transducer Reference chart: “BULLET” indicates a single frequency, skimmer style transducer with GPS. Mounts inside the Lowrance Ready cavity
using our factory installed Lowrance Ready mounting plate. “SPLITSHOT” indicates a skimmer style transducer, equipped with High CHIRP and
DownScan Imaging, plus detailed GPS mapping. Mounts inside the Lowrance Ready cavity using our factory installed Lowrance Ready mounting plate.
“TRIPLESHOT” indicates a long, skinny transducer profile, equipped with High CHIRP, DownScan Imaging and SideScan Imaging, plus detailed GPS
mapping. Mounts to our Lowrance Ready cavity using mounting kit: TripleShot Transducer Mount Kit, Hobie Part Number 72020220 incorporates a
modified TotalScan Lowrance Ready mounting plate, Tripleshot adapter mount and necessary hardware.
72023060 72023055
72023052 72023053 72023061 FITS HDS
72023054
72023052 RAM FISH FINDER BASE W/ 1” ARM 72023055 RAM LOWRANCE BASE W/ 1.5” ARM
72023053 RAM LOWRANCE BASE W/ 1” ARM 72023060 RAM LOWRANCE BASE W/ 1” ARM
72023054 RAM LOWRANCE BASE W/ 1.5” ARM 72023061 RAM LOWRANCE BASE W/ 1.5” ARM
...THEN CHOOSE RAM BASE (PAGE 31)
HOBIE.COM 39
72026010 72026012
BEARHAND CONTROL™
ERGONOMIC CONTROL SYSTEM
- FINGER CHOIL
- ANGLED SHAPE/OFF AXIS
-O PTIMIZED SPACE BETWEEN
HANDLES FOR MAXIMUM FORCE
72026014 6”
72026015 8”
72026016 10”
SAFETY WHISTLE
A whistle can save your life! Keep one attached to
your PFD in case of overboard emergency. Alert
approaching vessles. Alert other boaters or people TELESCOPING PADDLE
ashore that you need help. Measures just 20" in closed position (45" when fully extended).
MK0053 SAFETY WHISTLE Lightweight, anodized aluminum shaft corrosion resistant design.
Floats too! 6 1/2” wide blade will fit into an 8” hatch opening.
3091 TELESCOPING PADDLE
FEATURES:
Tri segmented soft foam design; Foam supported Ripstop-nylon collar; Dual cargo pockets (S, M, L, XL);
Dual integrated grab handle design (M, L, XL); Soft foam undercarriage support chasis; Integrated leash
attachment SIZING:
SIZE WEIGHT COLLAR BODY GIRTH
S9000XS PET PFD XS MANGO <12# XS 12 lbs. 8” - 12” 13” - 17”
S9000SM PET PFD SM MANGO 12-24#
S 12 - 24 lbs. 10” - 14” 15” - 21”
S9000MD PET PFD MD MANGO 24-60#
S9000LG PET PFD LG MANGO 60-90# M 24 - 60 lbs. 13” - 19” 18” - 30”
S9000XL PET PFD XL MANGO >90# L 60 - 90 lbs. 18” - 26” 24” - 36”
XL 90 - 120 lbs. 22” - 30” 30” - 42”
HOBIE SNIPS
Retractable line cutters.
72020103 SNIPS
QUAD LOCK UNIVERSAL FISH GRIP
PHONE MOUNT Handy fish grip in a glow-in-
This awesome adapter allows you to mount a phone or the-dark plastic material.
small device to H-Rail, H-Bar tubing. Designed for biking, 72020019 FISH GRIP
but great for Hobie rail attachment too! Quick 45 degree
twist to attach and lock. Release spring lever and turn 45
degrees to remove the device from the mount. Attaches
to rails with rubber rings or zip ties that are included in the
kit. 3M adheasive adapter attaches securly to your device
HOBIE FISHING HAWG TROUGH
Holds the big ones safely for measuring and photos before release. (30in / 76cm)
(water proof cases recommended of course). 72020067 HAWG TROUGH IMPERIAL
72020511 QUAD LOCK 72020167 HAWG TROUGH METRIC
ACCESSORY PACKAGES
72020024 MIRAGE PERFORMANCE PACKAGE 72020029 DELUXE KAYAK SAFETY PACKAGE
HOBIE.COM 43
MAINTENANCE
HOBIE MULTI-LUBE
A planet-safe lubricant recommended for lubricating HOBIE UV PROTECTANT
MirageDrives and many other uses. Environmentally Protect and rejuvenate fiberglass,
friendly for in-the-water applications. Hobie Multi- polyethylene, vinyl and PVC materials. Wipe
Lube offers excellent lubrication, is an anti corrosive on, the protectant absorbs into the material
coating, great for cleaning and many other uses... use and leaves a UV protective layer. Reduce the
on nearly anything that squeaks, rusts, corrodes or loss of essential oils and deflect the sun’s
binds up; MirageDrives, rudder drums, cams, fishing harmful UV rays. 12 oz.
reels and more. The 1 oz size is perfect for getting 70060001 HOBIE UV PROTECTANT
the lubricant into tight spaces by using the needle
applicator. The 4 oz size has a spray applicator for
coating chains and larger surfaces, shafts and bulky
parts. Every Hobie owner should have Hobie Multi-
Lube. Be nice to our planet, keep MirageDrives and
other components running smoothly and lasting
longer without polluting our waterways. Use it for all
shop, home and sport lubrication needs. MAGICA RUST REMOVER
5120 HOBIE MULTI LUBE 1 OZ Easily clean rust stains from fiberglass, plastic surfaces,
5121 HOBIE MULTI LUBE 4 OZ metal parts or fabrics. Although metal parts are made
from high quality stainless steel, machining tools often
leave carbon particles imbedded in the metal surfaces.
This material can bleed a rust stain onto other surfaces.
Magica simply dissolves the rust away.
1603 MAGICA GEL 8oz. BOTTLE
AQUASEAL MIRAZYME
ODOR ELIMINATOR
There's nothing quite like the odor of damp gear left in your
car trunk for a couple of days. With one application eliminate
TEAR-AID those odors from booties, wet-suits, dry-suits and the rest
Each TEAR-AID® repair patch is made from an exceptionally tough, matte of your gear. A 100% biodegradable product made from
finish, abrasion resistant, elastomer that resists puncture and tearing. a blend of 10 highly specialized, light activated microbial
It is combined with an aggressive adhesive formulated for high bond elements. Works by penetrating into pores of fabric, rubber
strength to a variety of surfaces such as canvas, leather, rubber, nylon, and even hard surfaces to eliminate odor naturally.
most plastics, paints, aluminum, stainless steel, fiberglass, polyurethane, 7003 8oz.
polyethylene, polypropylene, vinyl and vinyl coated. TEAR-AID® Type A
and TEAR-AID® Type B provide a simple and easy method of patching
holes and tears, as well as an excellent protective film solution.
72020030 TEAR-AID / TYPE A (POLY)
72020031 TEAR-AID / TYPE B (VINYL)
BARNACLE PLUS
BLUETOOTH SPEAKER
HOBIE-MASTER OF
WATER,
WIND, AND WAVES
Features: The man, Hobie, known by just
• Waterproof one name worldwide, has an epic
• Floats life story. This 12” x 9” hardcover
• Stores up to 1,000 songs book shows how it all came to be,
/ 4 GB internal memory and more, in 17 chapters with 300
• Industrial suction cup base pages, 120,000 words of text and
• Sand / Dust proof 585 photographs and illustrations.
• Water pressure proof charging port The book is available through
• Built-in mic & caller ID Hobie Cat and Hobie Kayak dealers
Hobie® and Speaqua have partnered up to bring a portable, worldwide.
waterproof speaker into the accessories lineup! This floating, tennis
ball sized speaker is both convenient and functional with Bluetooth Surfboards, catamarans and boats, RC
connectivity, call-taking capability and built-in 4 GB memory for holding model airplanes (the Hobie Hawk), and a whole lot
up to 1,000 songs. It mounts to any smooth surface using an industrial more “toys”—as Hobie himself describes his amazing life’s
suction cup base, and is perfect for the kayak, SUP or Eclipse. work— will all be celebrated in the biography of the man who
defined a lifestyle in surfing and sailing.
72026103 SPEAKER BLUE TOOTH AND 4GB
87369116 BOOK, HOBIE-MASTER OF WATER, WIND, AND WAVES
12451050 / 12451051 24” 36601000 6” 12453023 CHROME BLACK 12453024 12” BLACK
36601011 6” 12453025 12” WHITE
13001001 12 5/8”
HOBIE.COM 45
HARDWARE
CLEATS
HARKEN Extra rod stock
available at
CAMMATIC CLEAT no charge
Rounded jaws assure quick cleating/release
action and smoother teeth mean longer life
for your lines.
H471 MICRO CLEAT, CARBO JAW 1/8" TO 1/4" LINE
8
4 12 8030251 SCREW 10-32 X 1" FHMS
7 9
10 5 12 8030161 SCREW 10-32x1 1/2 RHMS-P SS
6
6 18 8080701 WASHER 1/4 X 1 SS HP
7 24 8080731 WASHER #10 FNDR SS
11 12 13
8 12 8050111 NUT 1/4-20 HX NYLOCK
9 24 8050201 NUT 10-32 NYLOCK LOPRO
KAYAK RIGGING KIT - HARDWARE
Set of fasteners for rigging a kayak for fishing accessories. Includes stainless bolts, 10 12 8050221 NUT (WELL NUT) 10-32 x1
nuts, washers, well nuts and more. All packed in a handy Plano box. You can 11 8 71110001 PAD EYE-BLK NYLON-3/8"
purchase any of the items separately. Purchase the kit and have it all, or pick and
choose your own based on your individual needs. All included parts are listed 12 18 81029 LINE HANGER
below as well as many more in the numerical section of our catalog.
13 8 78510001 BUNGEE HOOK
72020300 KAYAK RIGGING KIT
HOBIE.COM 47
POLARIZATION TECHNOLOGY
HOW HOBIE LENSES WORK
SPORT COLLECTION
FRAME TECHNOLOGY
SPORT COLLECTION
STYLE FRAME COLOR / LENS COLOR
SATIN BLACK FRAME
BAJA-010168 GREY / COBALT MIRROR POLARIZED PC LENS
MOTION COLLECTION
STYLE FRAME COLOR / LENS COLOR
SHINY GOLD FRAME
NE
NEWW BROAD-949468
GREY / COBALT MIRROR POLARIZED PC LENS
Kevin
Fishing Sales and
Support
Sym
Accounting
Gear Up for
your Hobie
Outdoor
Lifestyle
Jeffrey
Digital Assets
Manager
Kim
Administrative
Assistant
5056 5057
Fleece- Fleece-
lined lined
Beanie, Beanie,
Black Grey
6523X 6524X
Baja Stripe Charcoal PO Hoodie Baja Stripe Burgundy PO Hoodie
52
HOBIE APPAREL
Key: 1=S, 2=M, 3=L, 4=XL, 5=XXL, 6=XXXL (Example, 65011 is the Men’s Black T-Shirt S/S with Hobie® California Logo in size small.)
HOBIE.COM 53
HOBIE HATS & ACCESSORIES
6000
72026103
Beach Towel,
Speaqua Bluetooth
Orange
Speaker
6001
Beach Towel,
Lime
6004
Hobie Sunscreen,
6002 SPF 30, 8oz
Beach Towel,
Yellow
6005
Hobie Sunscreen,
6003 SPF 15, 8oz
Beach Towel,
Aqua
MK0070
Hobie Sunscreen,
SPF 30, 2oz
54
HOBIE HATS & ACCESSORIES
HOBIE.COM 55
MIRAGEDRIVE GT / V2
FIND HOBIE MIRAGEDRIVE 180 DIGRAMS AT HOBIE.COM/SUPPORT
HOBIE MIRAGEDRIVE
“GLIDE TECHNOLOGY” TECH TIP!
80010501 MIRAGE DRIVE GT - ST FINS WHAT MAKES A GT DRIVE? V2 Drums, V2 Chains,
80013501 MIRAGE DRIVE GTi - ST FINS iSeries GT Idler Pulley, V2 Idler Cable, GT sprockets and V2
80012501 MIRAGE DRIVE GTT - ST TURBO FINS (Threaded) masts
80012101 MIRAGE DRIVE GTT PA17 - ST TURBO FINS
81172001 PEDAL
ADJUSTMENT DECAL
53170020 SET SCREW
81190001 81193001
(GRY/BLK)
81193021 81192001 UPDATE KIT - V1 DRUMS/CABLES TO GT
(RED/BLK) (GRY/BLK) (2 GT DRUMS, V2 CHAINS, GT IDLER
PULLEY, V2 IDLER CABLE AND NUTS)
81193031 81192021
81171002 DRUM UPDATE KIT V1 TO GT
(BLU/BLK) (RED/BLK)
81192031
(BLU/BLK)
81175001 DRUM GT W/
BEARINGS 81155001 BOLT HOBIE MIRAGEDRIVE “V2” / “GT”
81156401 DRUM BEARINGS (15) 81123001 IDLER PULLEY GT
W/ BEARINGS 81203001 IDLER CABLE V2 (18.5”)
81202001 CHAIN ASSY V2 81156201 IDLER BEARINGS (12) 8050111 NUT
8050111 NUT
81095001 DRIVE ALIGNMENT PIN 2012+ 53170020 SET SCREW 81110001 PULLEY SHAFT
HOBIE.COM 57
PARTS - FORWARD
72104001 HOOK
10730000 CLEAT
74076101 BUTTON PLASTIC 8030111 SCREW
74076102 BUTTON SS
230cm
RUDDER - UP / DOWN
8004531 LINE (BLK)
81450001 HOBIE CHEEK BLOCK
8031065 10-32 x 7/8 SCREW
78560001 MESH STOWAGE POCKET W/FRAME 8031069 10-32 X 1-1/4 SCREW (AI)
8031501 SCREW 8050211 NUT
10730031 "PORT"
SHOWN
OLDER UP / DOWN
81392001 TWIST AND STOW CONTROL ARM UP/DOWN 81035001 UP / DOWN HANDLE
81380001 OLDER - CONTROL ARM UP/DOWN W/ SET-SCREW
81375001 SPRING
8080691 NYLON WASHER
81035011 BOLTED HANDLE AND CONTROL ARM KIT
8030791 SCREW
(REQUIRES 3/16" allen "BALL-END" wrench)
HOBIE.COM 59
PARTS - SEAT / CARGO
81269001 MIRAGE BACKREST - TWIST LOCK 71190001 WEBBING LIFT HANDLE (PLASTIC END)
71190000 WEBBING LIFT HANDLE (WEB WITH HOLE)
81268001 MIRAGE BACKREST - EXPAND PEG 8032011 SCREW
8080571 WASHER
81259001 SEAT STRAP w/ HOOK
81277001 HANDLE
81245001 ROLL PIN
81276001 TWIST-LOC
41220001 EYELET POST 53180011 3/8” HOG RING 78520001 EYELET HOLD DOWN
8031131 SCREW 21180000 1/2” HOG RING 8032121 SCREW
8011231 RIVET RS018BLK 1/8” SHOCKCORD
RS316BLK 3/16” SHOCKCORD
RS014BLK 1/4” SHOCKCORD
79538201 WEB PULL TAB
71110001 PADEYE 71120001 LASHING HOOK 78510001 BUNGEE HOOK 2101 SHOCKCORD FASTENER, 1/4”
8030031 SCREW 8030031 SCREW 8031961 SCREW
8012001 RIVET
HATCHES
SCREW-IN FITTINGS
HOBIE.COM 61
PARTS - REAR / RUDDER
TECH TIP!
MAINTENANCE AND TUNING - Maintenance and tuning
information for Twist and Stow rudder systems is available on
79050211 DRAIN PLUG W/ O-RING the Hobie Cat website support area.
10091000 DRAIN PLUG W/ O-RING
http://www.HOBIE.COM/support/history/
10092025 O-RING 79050212 O-Ring
Direct link to the support pages for kayaks is here:
http://www.HOBIE.COM/support/products/kayaks/
81394001 RUDDER PIN
81391011 GUDGEON
8030214 SCREW (2)
81399001 BOLT
81023001 SPECTRA CONTROL LINE 81399101 CAP
8063001 SWEDGE 8050211 NUT
81400001 TUBING
81405001 TUBE HOLDER
81405101 END CAP TWIST AND STOW
81403 “O” RING RUDDER ASSEMBLY 8030281 SCREW
81395001 SM BLADE
81396001 LG BLADE
61070000 CLEAT 8" HATCH 78540001 TRACK / FOOT BRACE MIRAGE CLASSIC &
8031131 SCREW 78535001 FOOT BRACE / LEFT PURSUIT
78536001 FOOT BRACE / RIGHT 71301001 LOC SEAL, 6.5FT
HOBIE.COM 63
ADVENTURE ISLAND
AMA 2015+
99304501 AMA HIBISCUS H424B FAIRLEAD
99305501 AMA DUNE H471 CLEAT
8031481 SCREW
V2 UPDATES 79531101 CLEAT WEDGE W/ FAIRLEAD
81412001 V2 AKA CASTING GLUE KIT 79531111 MAIN CLEAT WEDGE
79537001
BRACE RETAINER CLIP
OLDER MODELS
81396001 TWIST AND STOW RUDDER ASSY / LG BLADE
81397001 LARGE SAILING RUDDER BLADE
SEE RUDDER PAGE FOR TWIST AND STOW DETAILS *RUDDER UPDATED SPRING 2011
CURRENT RUDDER SHOWN ON TANDEM ISLAND PAGE
2017-2018 SAILS
AI V2 2015-
79104201 XBAR AI V2 - FWD 2015- 79547701
79104101 XBAR AI V2 - REAR 2015- SAIL ADV V2 ARUBA
79546701
79503901 AKA AI V2 - LT FWD 2015- SAIL ADV ISL V2 BAHAMA
79503801 AKA AI V2 - RT FWD 2015-
79503701 AKA AI V2 - LT REAR 2015- 22080011 BATTEN LUFF CAP SET
79503601 AKA AI V2 - RT REAR 2015-
AI V2 CROSSBAR PARTS
79512001
79510721 V2 XBAR CLAMP TOP
FURLER DRUM AI -2014
79510731 V2 XBAR CLAMP BOTTOM
79512002
8032088 SCREW 79533001 MAST BEARING PLATE (REQ 2)
FURLER DRUM AI 2015+
8080561 WASHER 8031231 SCREW
79511101 8050801 NUT
79532201 EDGE GUARD MAST BASE / HOLE TYPE 90610111 BEARINGS (EA / REQ 24)
8030335 SCREW (MAST RECEIVER ATTACH) 90610112 BEARINGS SET OF 12
8050111 NUT (MAST RECEIVER ATTACH)
8090900 CAPPLUG '07 BASE 79532001 V1 MAST RETAINER SPRING
HOBIE.COM 65
TANDEM ISLAND-2014
CURRENT
8030214 1/4-20 SCREW (2)
8030355 5/16-24 SCREW (1) LOWER
88991303 AMA PAPAYA
OLDER (2 HOLE GUDGEON) 88991314 AMA NEW RED
8030214 1/4-20 SCREW (1 ) (OR 2*) 88991305 AMA DUNE
8030346 1/4-20 STUD-NUT HEAD PH17-4 (1) LOWER AMAS AVAILABLE WITH 2015+
*OLDEST, LOWER LATER REPLACED BY BOW SHAPE ONLY
8030346 STUD (STRONGER FOR 2 HOLE)
MAINSHEET SYSTEM
38670011 "S" HOOK
H083 BLOCK-BULLET w/ BECKET 88991001 CENTERBOARD
RM014BLK LINE (57') 88991021 PIN
H2655 BLOCK, 40mm CARBO FIDDLE 88523102 AKA BRACE ASSY (R) 88991031 PIN HOLDER
H2131 SHACKLE W/PIN 5/32” 8031461 SCREW
8030671 SCREW
88991011 COVER
8030071 SCREW (4)
79520501 AKA RIGHT REAR 81242001 SPRING
88991041 KNOB
8040401 BOLT
88991150 CAP
79520604 SPRING HOOK AKA LOCK KIT (4) 88991071 FURLER DRUM TI
79520602 AKA SPRING HOOK
79522202 AKA LOCK BEARING
8031401 SCREW
71320001 GASKET
88991211
V-FRAME
TURNBUCKLE
8050111 NUT
71125501
AKA DOUBLE SHOCK CORD ASSY
88991201 V-FRAME BASE
HOBIE.COM 67
PRO ANGLER 14 (SEE 2013+ FOR CHANGES)
H-RAIL PARTS
84615 STEERING HANDLE MOUNT CAP 71707001 RECTANGULAR HATCH TWIST AND SEAL
84616 MOUNT CAP 71707002 FLANGE GASKET
84617 TUBE MOUNT 8032121 SCREWS (14)
846143 SIDE TUBE, H-RAIL PA12/14 71708001 TACKLE MANAGEMENT RACK
84610 TUBE, REAR HANDLE PA12/14 8004531 TACKLE MANAGEMENT LINE (14”)
84611001 TUBE, REAR HANDLE PA17 72020321 PLANO BOX - MEDIUM BLUE
84504401 HANDLE END FITTING 72020331 PLANO BOX- LARGE RED
71709001 BUCKET, HOBIE RECTANG HATCH
88991301 STEERING HANDLE
86505401 SECONDARY STEERING HANDLE
88991235 ROLL PIN
8030125 SCREW
88991151 STICKER
84619001 STEERING RISER
8032211 SCREW, STEERING RISER
84506021 DUAL STEERING RISER KIT - PA
86505001 STEERING CRANK
86505101 STEERING CRANK SUPPORT 81408101 HANDLE
8031065 SCREWS 81401101 CAP, RUDDER
8050211 NUTS 81401001 CAP, SEAT
81244001 STEERING SPRING 81401201 CAP, SKEG
86505121 DUAL STEERING LINE ASSEMBLY 81401401 CAP, DRAIN
80019011 LINE REPLACEMENT KIT 8004531 CONTROL LINE (9’)
84507881 BOA RUDDER TENSION REPL 84501541 CLEAT REPLACEMENT KIT
HOBIE.COM 69
VANTAGE ST / XT / CT SEATS
84507501
VANTAGE ST (PA12 & 14)
84507501 VANTAGE SEAT 84507551 BACK CONTROL LINE
84507561 BOTTOM CONTROL LINE
84507521 BACK FRAME ASSEMBLY
84507801 REPLACEMENT FABRIC KIT
86507501
VANTAGE XT (PA17)
For Vantage XT support issues, parts
diagrams, videos on function, see
HOBIE.COM/support
84507821
VANTAGE CT (2015 MIRAGE MODELS)
84507701
VANTAGE CT (ISERIES MODELS)
For Vantage CT support issues, parts
diagrams, videos on function, see HOBIE.
COM/support
865140 SCREW
LIVEWELL PARTS
72021001 BATTERY 72021009 DOWNSPOUT FITTING W/BK RING
72021002 BATTERY CHARGER 72021010 INTAKE 90 DEGREE
72021003 SWITCH 72020015 ROD HOLDER - LIVEWELL
72021004 INTAKE TUBE ASSY 72021020 DOWNSPOUT TUBE
72021051 XL INTAKE TUBE ASSY 72021021 TERMINAL COVER
72021005 STRAP SET 72021022 ATTWOOD PUMP
72021006 BATTERY LID 72021023 7” INTAKE TUBE (PRO A)
72021007 PUMP CONNECTOR FEMALE 72021025 ELEC CONNECTOR REPL SET
72021008 PUMP CONNECTOR MALE 79050211 DRAIN PLUG
HOBIE.COM 71
INDEX
OS = Oversized item / Additional handling charges apply
Part Description OS Part Description OS
65214 UNISEX SKY BLU PO HOODIE XL - 8031071 SCREW 10-32 X 1-1/4 PHMSP -
65215 UNISEX SKY BLU PO HOODIE XXL - 8031081 SCREW 10-32 x1 3/4 PHMS-S SS -
65221 UNISEX SKY BLU ZIP HOODIE S - 8031111 SCREW 1/4-20x1 PHMS -P -
65222 UNISEX SKY BLU ZIP HOODIE M - 8031131 SCREW #10x 3/4 PHSM-PH SS( ABA -
65223 UNISEX SKY BLU ZIP HOODIE L - 8031151 SCREW #10 X 1/2 PHSMS-P -
65224 UNISEX SKY BLU ZIP HOODIE XL - 8031191 SCREW 1/4-20 X 1-1/4”PHMS -
65225 UNISEX SKY BLU ZIP HOODIE XXL - 8031201 SCREW 8-32 X 1-1/4 SOC SET CUP -
65231 BAJA STRIPE CHAR PO HOODIE S - 8031231 SCREW 8-32 X 7/8” FHMS -
65232 BAJA STRIPE CHAR PO HOODIE M - 8031401 SCREW 6-32x1/2 FHMS-P SS -
65233 BAJA STRIPE CHAR PO HOODIE L - 8031451 SCREW #8-32 x 5/16 P-THMS SS -
65234 BAJA STRIPE CHAR PO HOODIE XL - 8031461 SCREW 8-32 x 1” PHMS -
65235 BAJA STRIPE CHAR PO HOODIE XXL - 8031481 SCREW 8-32 X 1-1/4 PHMS-P -
65241 BAJA STRIPE BURG PO HOODIE S - 8031490 SCREW 8-32 X 1/2 FHMS-P -
65242 BAJA STRIPE BURG PO HOODIE M - 8031501 SCREW 8 X 3/4” FHSMS-P SS -
65243 BAJA STRIPE BURG PO HOODIE L - 8031581 SCREW #8 X 5/8” PHSMS-SS PH -
65244 BAJA STRIPE BURG PO HOODIE XL - 8031611 SCREW #8 x 3/8 PHSMS PH 316 SS -
65245 BAJA STRIPE BURG PO HOODIE XXL - 8031781 SCREW 5/16-18 X 1 E/S SOC -
72010 KEY FLOAT/SCUPPER PLUG - 8031811 STUD 5/16-18 X 1-1/4” 18-8 SS -
72035 QUICK STRAP SOFT RACK-24.0” - 8031961 SCREW 12-24 x 1-1/4 P-OHMS SS -
72040 QUICK STRAP RACK W/TIE DN - 8032011 SCREW 1/4-20x1/2 RHMS-P SS -
72041 MULTI STRAP SYSTEM - 8032061 SCREW 1/4-20x1 1/4 PHPMS -
72044 PADS AERO BAR - 24” - 8032081 SCREW 1/4-20 X 1-1/4 CAP SCREW -
72045 PADS ROOF RACK - 24” - 8032085 SCREW 1/4-20 X 1-1/4 FHMS-P -
72046 PADS ROOF RACK - 36” - 8032088 SCREW 1/4-20 x 2-1/4 HX CAP -
72049 PADS AERO BAR - 36” - 8032121 SCREW #10 x 1 PHSMS-P TF-12 -
72050 KAYAK COVER / 9-12’ 6” - 8032211 SCREW 10-32 X 2-1/2 PHMS -
72051 KAYAK COVER / 12-15’ - 8032231 SCREW 1/4-20 X 1-1/4 BTN HD -
72052 KAYAK COVER / 14-16’ - 8032241 SCREW 1/4-20 X 3/4 BTN HD -
72053 KAYAK COVER / 14-16’ 6” - 8034061 ALLEN WRENCH 1/8” -
72055 KAYAK COVER / PA 14 CUSTOM - 8034071 ALLEN WRENCH 5/64” -
72056 KAYAK COVER / PA 12 CUSTOM - 8040131 BOLT 1/4-20 X 3 1/2 -
72057 KAYAK COVER / PA 17 CUSTOM - 8040132 T-BOLT, 1/4-20 x3/4” -
72058 KAYAK COVER / AI CUSTOM 2015+ - 8040401 BOLT 5/16-18x3” HX HD 18-8 SS -
72059 KAYAK COVER / TI CUSTOM 2015+ - 8040531 BOLT 3/8-16 X 1-1/2 HEX CAP-S -
72065 ST-TURBO FIN KIT - GRAY/BLACK - 8050111 NUT 1/4-20 HX NYLOCK -
78501 QUEST 13 RUDDER KIT/TWIST N ST - 8050122 NUT 1/4-20 THUMB -
78502 QUEST 11 RUDDER KIT/TWIST N ST - 8050201 NUT 10-32 HEX NYLOCK -
80024 BAG, MIRAGEDRIVE CARRY - 8050211 NUT 10-32 NYLOCK LOPRO -
81024 LINE 5/32” NYLON BRAID-BLACK - 8050221 NUT (WELL NUT) 10-32 x1 -
81029 LOOP STRAP, 1/4” OD, NYLON - 8050540 NUT 3/8-16 HX NYLOCK-LP -
81111 DECAL DOME M-DRIVE GT - 8050801 NUT 8-32 MACH/SCREW SS -
81380 CONTROL ARM - UP/DOWN - 8052081 NUT 1/4-20 NYLON BLK -
83102 TOOL GERBER MULTI-PLIER 600 - 8060111 COTTER PIN 3/32 X 3/4 SS -
83104 TOOL, HOG RING PLIERS - 8060141 COTTER PIN 1/8” X 2” SS -
84503 SAIL KAYAK MAST 2-PC - 8063001 SLEEVE NICROPRESS 1/16” -
84511 BATTEN KAYAK SAIL (55”) W/CAP - 8080211 WASHER #12 FLAT -
84630 CRANK ASSY TPA REVERSIBLE PEDA - 8080461 WASHER #10 FLAT-.25 OD X .56 I -
84631 PAD, UNI-DIR PEDAL - 8080500 WASHER #10 FINISH -
84950 BAG - KAYAK SAIL 128.0” - 8080541 WASHER 1/4 X 5/8 FLAT SS -
795465 SAIL ADV V2 WHT/GRAY/TURQ (AZU OS 8080551 WASHER-FLAT .227 X .453 SS -
795475 SAIL ADV V2 RED/GRAY/WHT (SMOK OS 8080561 WASHER 1/4 X 1/2 X .032 SS -
795485 SAIL ADV V2 TURQ/PAPAYA/WHT (B OS 8080571 WASHER FLAT 1/4x3/4x.063 SS -
865140 SCREW 1/4-20 X 1-1/2 PAN HD PH - 8080671 WASHER 5/16 X 3/4 FLAT SS -
8000341 LOCTITE BLUE .5 ML CAPSULE - 8080691 WASHER 3/8 X 3/4 NYLON-FLAT -
8004381 LINE 5 MM, DK GRAY w/MANGO TRA - 8080701 WASHER 1/4 X 1 SS HP -
8004531 LINE 1/8 NYLON BRAID BLK - 8080731 WASHER #10 FNDR SS -
8004831 SHOCKCORD, 3/16” SILVER - 8080791 WASHER NYLON FLAT (TNS) -
8010131 RIVET POP 3/16x3/8 PH-SS - 10091000 DRAIN PLUG W/GASKET -
8010181 RIVET POP 3/16x1/4 PH - 10092025 GASKET-BLACK RUBBER -
8011231 RIVET POP 3/16x1/2 PH - 10092030 DRAIN PLUG w/GASKET- SEAT: KON -
8012001 RIVET 6-9 BULB TYPE-KAYAK - 10730000 CLEAT-MAST -
8020030 CLEVIS PIN 3/16 X 7/8 GRIP - 10730021 CLAMCLEAT STBD BLACK -
8020041 CLEVIS PIN 3/16x.570 GRIP - 10730031 CLAMCLEAT PORT BLACK -
8020061 CLEVIS PIN 3/16x.753 GRIP - 10860001 LOCK RING 3/16” -
8020381 CLEVIS PIN 1/4x.578 GRIP - 10860100 LOCK RING 3/16” - 100 PACK -
8020461 DETENT RING PIN 1/4” X 1-1/8” - 10870000 SHACKLE “BOW” 4.7 MM -
8030027 SCREW 10-32 X .5 SKT HD CAP NY - 11220000 SHACKLE STND “D” 4.7 MM -
8030031 SCREW #10x3/4 OHSMS-P - 12451031 DECAL “HOBIE” DIAMOND-TURQ/SLV -
8030037 SCREW #6-32 x 3/4 PHMS - 12451050 DECAL “HOBIE” SCRIPT BLACK -
8030071 SCREW 10-32 X 1/2 FHMS - 12451051 DECAL “HOBIE” SCRIPT WHT -
8030111 SCREW 10-32 X 1 PHMS-P SS - 12453011 DECAL - HOBIE KAYAKS -
8030125 SCREW 10-32 x 1/2 BTN HD SCKT - 12453021 DECAL - HOBIE KAYAK FISHING -
8030126 SCREW 10-32 x 3/8 FLNG BTN HX - 12453023 DECAL, HOBIE SCRIPT CHROME/BLK -
8030131 SCREW 10-32 X 7/8 PHMS SS - 12453024 DECAL, 12” HOBIE FISHING BLACK -
8030151 SCREW 10-32 x 1/2 PHMS-P SS - 12453025 DECAL, 12” HOBIE FISHING WHITE -
8030161 SCREW 10-32 X 1-1/2 PHMS-P SS - 12453031 DECAL - HOBIE CAT TEQ -
8030171 SCREW 12-24 X 3/4 RHMS-P SS* ( - 13001001 DECAL BOW - FLYING “H” BLK -
8030212 SCREW 1/4-20 X 1” OHMS-PH SS - 20860000 LARGE CLEVIS RING -
8030214 SCREW 1/4-20 x 1” BTN HD - 20860100 LARGE CLEVIS RING / 100 PACK -
8030231 SCREW 10-32 x 3/8 P-THMS - 21180000 HOG RING 1/2” S/S, BLUNT, 14 G -
8030251 SCREW 10-32 X 1” FHMS - 22080011 JIB BATTEN PKT PROT W/SCREWS -
8030261 SCREW #10 X 1-1/4 PHSMS-P - 36601000 DECAL FLYING “H” SMALL BLK -
8030281 SCREW 10-32 X 3/4” RHMS-P SS - 36601011 DECAL FLYING “H” SMALL WHT -
8030285 SCREW 10-32 X 5/8” FLMS-P - 37380001 CLAMCLEAT MINI CL204 -
8030335 SCREW 1/4-20 x 3/4 HX SCKT CAP - 37661091 LANYARD GTWY WING LEG -
8030346 SCREW W/NUT ISLAND GUDGEON - 38120031 NYLON PUSH-IN PANEL RIVET -
8030355 SCREW 5/16-24 x 3/4 BTN HD SCK - 38652000 TRAILER HOBIE ALUM KAYAK SINGL OS
8030361 SCREW 5/16-18 X 1-1/4 SOC HD - 38652001 TRAILER HOBIE ALUM KAYAK TI SI OS
8030382 SCREW, 1/4-20 x 7/8” BUTTON HE - 38652200 TRAILER HOBIE ALUM KAYAK DOUBL OS
8030422 SCREW 1/4-20x1 PH-LONG LOK* - 38652201 TRAILER ALUM KAYAK DOUBLE DOUB OS
8030451 SCREW 1/4-20 X 1-3/4 SCKT HD - 38652202 TRAILER HOBIE ALUM KAYAK PA17 OS
8030502 SCREW 8-32 X 3/8 PMMS - 38652210 TOWER - TRAILER HOBIE ALUM DOU OS
8030551 SCREW 8-18x1/2 FLT HD DRL BLK - 38653300 TRAILER PAD KIT - KAYAKS -
8030591 SCREW 1/4-20 x 1-5/8 P-OHMS w/ - 38670011 S HOOK,WAVE HALYD DWNHL -
8030641 SCREW 10-32 X 1/2 THMS-P SS - 40590001 TILLER CONNECTOR RETAINER -
8030671 SCREW 8-32 X 5/8 PHMS-P - 41220001 EYELET POST -
8030781 SCREW 1/4-20 X 1/2” SOC CAP - 53170020 SCREW 1/4-20 X 1/2 SKTST (ABA) -
8030791 SCREW 1/4-20 X 5/8 SOC CAP - 53180011 HOG RING 3/8” S/S FOR 3/16” BU -
8030981 SCREW 10-32 x 3/4 PHPMS - 61070000 CLAMCLEAT JUNIOR CL203 -
8031032 SCREW, 10-16x1” SELF-TAP S.S. - 70050001 HOBIE BOAT CLEANER-12oz -
8031033 SCREW, 10-16x1 1/2” SELF-TAP S - 70060001 HOBIE UV PROTECTANT-12oz -
8031065 SCREW 10-32 x 7/8” THMS-P - 71110001 PAD EYE-BLK NYLON-3/8” -
8031069 SCREW 10-32x 1-1/4 THMS-P - 71113001 DRAIN PLUG -
HOBIE.COM 77
HOBIE CAT COMPANY
Holding Company
Oceanside, CA, U.S.A.
1-800-HOBIE-49
hobie.com
I N T E R N AT I O N A L 8 7 3 6 7 0 4 8