Professional Documents
Culture Documents
Sika® Rokkon RB
NON EXPLOSIVE DEMOLITION AGENT
PRODUCT INFORMATION
Packaging 5 kg bag
Shelf Life Sika® Rokkon RB has a minimum shelf life of 9 months.
Storage Conditions Dry, cool, shaded place
Do not place Sika® Rokkon RB bags directly on the floor.
1/3
SYSTEM INFORMATION
System Structure Hole Diameter
Minimum 35 mm
Maximum 50 mm
The larger the hole diameter is, the greater the expansive stress becomes
Hole Depth
The hole length varies with the shape of the object to be demolished
When the length is less than 3 times that of the hole diameter, less crack-
ing will occur, the breaking effect is lessened and the time required for the
demolition is increased
Kind of Object Hole Depth
Rock/boulder 80 % of height
Concrete 90 % of height
Hole Spacing
Hole Spacing Hole spacing varies with the properties of rock, joint and con-
dition of the surface, rebars quantity, secondary breaking required etc
Rock Hole Spacing
Hard virgin rock 40 - 60 cm
Soft virgin rock 50 - 70 cm
Concrete Hole Spacing
Unreinforced concrete 40 - 70 cm
Reinforced concrete 20 - 35 cm (depending on quantity
of rebars per m3 of concrete)
APPLICATION INFORMATION
Product Temperature 15 °C - 35 °C
(do not use Sika® Rokkon RB beyond the above application temperature)
Ambient Air Temperature 15 °C - 35 °C
(do not use Sika® Rokkon RB beyond the above application temperature)
Substrate Temperature 15 °C - 35 °C
(do not use Sika® Rokkon RB beyond the above application temperature)
Curing Time Cover the filled holes with a plastic cover or wet hessian to avoid any incid-
ents caused by blown-out shots.
The time required for the crack formation is normally between 10 – 24
hours depending on the temperature, hole diameter and spacing.
2/3
▪ Do not use for other purposes besides the cracking of LEGAL NOTES
rocks or concrete
▪ Whenever possible keep filled holes covered for pro- The information, and, in particular, the recommenda-
tection tions relating to the application and end-use of Sika
▪ Ensure the area is suitably isolated prior to com- products, are given in good faith based on Sika's cur-
mencement of works rent knowledge and experience of the products when
properly stored, handled and applied under normal
BASIS OF PRODUCT DATA conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
All technical data stated in this Product Data Sheet are strates and actual site conditions are such that no war-
based on laboratory tests. Actual measured data may ranty in respect of merchantability or of fitness for a
vary due to circumstances beyond our control. particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
LOCAL RESTRICTIONS from this information, or from any written recom-
mendations, or from any other advice offered. The
Please note that as a result of specific local regula- user of the product must test the product’s suitability
tions the declared data and recommended uses for for the intended application and purpose. Sika re-
this product may vary from country to country. Please serves the right to change the properties of its
consult the local Product Data Sheet for the exact products. The proprietary rights of third parties must
product data and uses. be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
ECOLOGY, HEALTH AND SAFETY refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
For information and advice on the safe handling, stor- be supplied on request.
age and disposal of chemical products, users shall refer
to the most recent Safety Data Sheet (SDS) containing
physical, ecological, toxicological and other safety-re-
lated data.
SikaRokkonRB_en_ID_(09-2016)_1_1.pdf
3/3