Professional Documents
Culture Documents
Technical specification
Bore (without jaws) 102 mm 4.0 in Feed force/Pull force 65 kN 14 600 lbf
Bore (without covers) 170 mm 6.7 in Feed speed 1,0 m/s 3,28 fps
2
Rotation unit Power units
The rotation unit is available in two There are two different power units available, one electric and one
sizes, A-N and B-H, they are easily diesel version. They have two variable flow hydraulic pumps, mount-
interchangeable. The rotation unit ed in tandem. The electric version is supplied with a 130 liter (34,4
consists of a hydraulic motor, a gal) oil tank, and the diesel version is equipped with a 120 liter (31,7
sealed gear box, a hollow spindle gal) oil tank. Both are equipped with a water type oil cooler and fil-
and an Atlas Copco patented hy- ters. An air type of oil cooler is available as option for the electric ver-
draulic chuck. The chuck grips the sion, and standard on the diesel version. Length of hoses between
rod by hydraulic pressure, which rig and power unit is 7 m (275”).
is adjustable. The chuck jaws are
of quick change type. The rotation ELECTRIC VERSION PU6E DIESEL VERSION PU6D
speed is adjustable from the control
Rating at Rating at
console. The chuck and rod holder 90 kW* 122 hp 153 kW 205 hp
1 450 rpm 1 800 rpm
are synchronized. The B-H rotation
unit is available with two different Main pump Main pump
hydraulic motors to cover a large Max flow 200 l/min 52.8 gpm Max flow 200 l/min 52.8 gpm
RPM-Torque area. Max pressure 315 bar 4 569 psi Max pressure 315 bar 4 569 psi
Service pump Service pump
80CC A-N
Max flow 65 l/min 17.2 gpm Max flow 85 l/min 23 gpm
Max rotation 1 640 rpm
Max pressure 240 bar 3 481 psi Max pressure 240 bar 3 481 psi
Max torque 1 080 Nm 796 ft lbf
* Due to intermittent drilling cycles, higher power than 90 kW can occur.
Spindle inner diameter 78 mm 3.1 inch
Chuck axial holding force 100 kN 22 480 lbf
Electric power unit, Diesel power unit,
Weight 162 kg 357 lb dimensions and weight dimensions and weight
110CC B-H A 1 845 mm 73 in A 2 540 mm 100 in
Max rotation 1 380 rpm B 1 250 mm 49 in B 2 330 mm 92 in
Max torque 1 590 Nm 1 173 ft lbf C 790 mm 31 in C 1 200 mm 47 in
Spindle inner diameter 101 mm 4.0 inch Weight 1 050 kg 2 315 Ib Weight 2 200 kg 4 850 Ib
Chuck axial holding force 150 kN 33 720 lbf
Weight 254 kg 560 lb
160CC B-H
Max rotation 1 190 rpm
Max torque 2 300 Nm 1 696 ft lbf
Spindle inner diameter 101 mm 4.0 inch B
Chuck axial holding force 150 kN 33 720 lbf
Weight 280 kg 617 lb
A C
Torque
(Nm) Optional eqipment and accessories
2500
Device suitable for use in narrow tunnels and drifts. It
Bracing device allows simple anchoring of the feed frame between the
2000
160cc B-H floor and roof/wall of the gallery, drift or tunnel.
Wheel kits For both rig and power unit.
1500 110cc B-H Wireline sheave For steep up hole drilling.
Air/Oil cooler Air cooled heat exchanger for cooling of the hydraulic oil.
1000 The water collector seals against the rock face and
Water collector
allows collection of flush water and cuttings.
The casing bracket and casing clamps are used to help
500 Casing bracket
80cc A-N guide the rig on a casing tube.
With the optional 5 m feed extension tubes, the total
Extra feed
length of the feed frame can be increased to 7,5 m.
400 800 1200 1600 rpm extension
(Standard length 3,5–4,5 m.)
Keyhole wall
Available for both A-N and B-H size.
bracket
3
Measurements & weights
may show equipment with optional extras. Specifications and equipment subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
contents or any part thereof is prohibited. This applies in particular to trademarks, modeldenominations, part numbers and drawings. lllustrations and photos in this brochure
Transport dimensions
© Copyright 2012, Atlas Copco Craeliuss AB, Märsta, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorised use or copying of the
A
850 1 800
Dimension mm in mm in
A 3 300 130 3 800 154
B 2 100 83 2 100 83
C 2 700 106 2 700 106 B
D 1 100 43 1 100 43
Weights
A-N Rot B-H Rot
Rig type kg Ib kg Ib C
The above drill depth capacities only serve as guidelines and refer to verti-
cal down drilling. Atlas Copco cannot guarantee that these results can be A
achieved in all drilling conditions.
Working dimensions
850 1 800
Dimension mm in mm in
B
A 2 842 112 3 598 142
B 2 842 112 3 598 142 C