Professional Documents
Culture Documents
Inverter type
Mobile
X-ray
System
MUX-10 MobileArt eco
GENERAL
The MUX-10 is a mobile x-ray system. It is designed for radiography
examinations in any location away from the main X-Ray department. The unit
consists of an inverter X-Ray generator, a telescopic tube arm all in a system.
MUX-10
FEATURES
SPECIFICATIONS OF (9) Minimum inherent filtration
(1) Easy positioning: MAIN UNIT
X-ray tube assembly:
Because the tube arm is totally (1) Rating Equivalent to 1.5mmAl,
balanced, any positioning is fast • Maximum tube voltage: 125kV measured at 70kV
and quick. • Maximum tube current: 160mA Collimator:
• Maximum power: 12.5kW Equivalent to 1.0mmAl,
(2) Wide positioning area: (12.5kW at 0.1 sec) measured at 70kV
By telescopic methods of
movements, positioning flexibility is (2) Power supply (10) Number of cassettes
increased. Single phase AC 50/60Hz, 1.5kVA accommodated
Standard voltage: 100, 110, 120, 10 cassettes of 14inch × 17inch
(3) Unobstructed visibility: 200, 220, 230, 240V (11) This unit is not explosion-proof
Because the wide view design, it type.
(3) Adjustment of tube voltage 40 to
can be driven more easily and
125kV in increment of 1kV
safely.
(2) Effective focal spot size: 0.7 × 0.7 CONFIGURATION • Type: Single phase, AC
• Frequency: 50/60 Hz
mm
• Standard voltage: 100, 110, 120,
(1) Inverter type high voltage
generator 200, 220, 230, 240 V
(3) Max. anode heat storage capacity:
• Fluctuation of voltage: ±10% from
140kHU (100kJ)
(2) X-ray tube unit standard voltage
(4) Tube assembly heat storage CIRCLEX 0.7U161CS-36
capacity: 1060kHU(750kJ)
(3) Collimator
R20CA
(5) Max. continuous input:
170HU/S (120 W) (4) Cart
Remarks:
*1 This is max. value which can be used
at the time of adjustment of tube current.
*2 Conditions of detection for the leakage
radiation are
(1) Max. used tube input 125 kV, 160
W continuously.
MUX-10
DIMENSIONS AND
WEIGHT
Height during Approx. 1930 mm (76.0 inch) Tube rotation around
±180°
transportation from floor support arm
±270°
UNIT : mm
Remarks
* Every value in this Product Data Sheet is a standard value, and it may vary a little from the actual at each site.
* The appearances and specifications are subject to change for reasons of improvement without notice.
* Certain configurations may not be available pending regulatory clearance. Contact your Shimadzu
representative for information on specific configurations.
Shimadzu Corporation
Shimadzu Corporation Medical Systems Group has
Headquarter been certified by TÜV Rheinland as a manufacturer
of medical equipment and systems in compliance
1, Nishinokyo-Kuwabaracho, Nakagyo-ku, Kyoto 604-8511, Japan
with ISO9001: 2008 Quality Management Systems
http://www.shimadzu.com and ISO13485: 2003 Medical Equipment Quality
Management Systems.