Professional Documents
Culture Documents
PowerCase A
1/4
Drawer 75H
287mm
mm
m 293 Ergonomic
80m
Carry Handle
Modern
Flow-Line
Design
Stackable
Non-slip studs
High Impact
Plastic Material
PowerCase B
1/2 Scratch-resistant
Drawer 75H
399mm
mm
m 411
81m
PowerCase C
1/2
Drawer 150H
399mm
www.boxo-tools.com
mm
411
mm
104
PowerCase D
1/2 1
Drawer 150H Drawer 75H
399mm
or
mm
411
m
126m
02
VVP001
Suspension System
• Designed to stop the damper-rod from rotating while the
retaining nut is removed or replaced.
• Allows the use of a torque-wrench to achieve the correct
torque without the risk of the damper-rod rotating. 6 7 8 9 10
18 19 20 21 22 23 24 25 26
31 32 33 34 35 36 37 38 39
27 28 29 30 15 16 17
03
VVP006
20Pc Turnbuckle for shock absorber toplid
• Designed to stop the damper-rod from rotating while the retaining nut is
Suspension System
removed or replaced.
• Allows the use of a torque-wrench to achieve the correct torque without
the risk of the damper-rod rotating.
• Includes: VP001-7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 19 / 20 / 22 / 25 / 28 /
29 / 30 / 31 / 33 / 36 / 37 / 38
VVP002
MacPherson Spring Dumper Extractor
(Replaceable)
Applicable:
BMW, TOYOTA, FORD, MITSUBISHI, VW, AUDI, SAAB, NISSAN,
HONDA, ACCORD, SUBARU, VOLVO, OPEL, PORCHE, SEAT,
ALFA ROMEO, CHRYSLER
Instruction:
Step 1: Choose an suitable a pair of jaws.
Step 2: Screw and fasten the jaws on fix jaw mount.
Step 3: Using a 21 mm hex-inside spanner and tightening
the tool axle clockwise to press coil spring.
04
VP002-1
Compressor Fixed Base
Suspension System
• There are 5 holes on the frame use to
fix on the workbench.
• Use adjustable clamp with different size
of compressor cylinders.
• The fixed base is using to fix the
compressor tightly, it will not move
easily on working.
• It`s more safe, easy, and convenient.
VVP003
Spring Compressor for Mercedes-Benz
• Telescopic compressor for shock absorber springs.
• Suitable for removing and positioning helicoidal springs within multi-link,
independent arm suspension systems-both front and rear.
• Supplied with two pairs of interchangeable caps provided with a three-hook
safety system
Ø70/130:
Mercedes-Benz (124,202,210), Saab, Ford, Skoda
Ø90/150:
Mercedes-Benz (126,140)100/200, Opel, GM, Lada, Peugeot 406/605 Rover,
Hyundai, Saab, Volvo, VW, FIAT, Mazda, Toyota, Nissan, Mitsubishi, Ford
Special safety shape design No.1 The data in the table is given B
(like waves) could easily lock the disc by way of example,as the car
(part No. 2) manufacturer may make some
changes.
VVP005
www.boxo-tools.com
05
VVR004
Micro-Engineering Puller Kit
Steering System
A
Always grease all threaded
bar & metal products
VVR006
B
Always grease all threaded
bar & metal products
VVR007
5Pc Tie-Rod / Ball Joint
www.boxo-tools.com
06
VVA001
Axis Repair
• A great tool used to replace front wheel
bearing without removing the steering
knuckle & strut assembly.
• As the spindle assemble isn`t removed
there is no need to align front end after the
job is done.
• Fit on most cars.
• Could be worked with shop press also.
• 21pcSIZE: 38 – 50 – 55-59 – 63. 5 – 66.5
– 70.5 – 71. 5 73 – 73. 5 – 74. 5 – 76 77.5 –
81. 5 – 83. 5 – 86 – 86 – 88.5 – 91 – 102 –
102mm
1pc: Nut /1pc: Screw /1pc: Washer
D
Always grease all threaded
bar & metal products
VVA002
VVA003
C
Always grease all threaded
bar & metal products
07
VVA005
5Pc Bolt Extractor Set
Axis Repair
A
Always grease all threaded
bar & metal products
VVA006
VVA008
B
• Correct area • Don't through
08
VA401~405
Bearing Separator
Axis Repair
VA401: VA405:
Capacity 1-1/4"~2-1/4". (30x 50mm) Capacity 6"~8". (150x 200mm)
Bolt(9.5mm x L 125mm x 3/8" x 24UNF) Bolt(1" x L 350mm x 1" x 12UNF)
Body thread 3/8" x 16UNC Body thread 3/4" x 10UNC
VA402:
Capacity 2-1/4"~3-1/2". (50x 75mm)
Bolt(12.7mm x L 135mm x 1/2" x 20UNF)
Body thread 3/8" x 16UNC
VA403: VA404:
Capacity 3"~4-1/2". (75x 105mm) Capacity 4"~6". (100x 150mm)
Bolt(16mm x L 165mm x 5/8" x 18UNF) Bolt(19mm x L 260mm x 3/4" x 16UNF)
Body thread 1/2" x 13UNC Body thread 5/8" x 11UNC
VA411 VA412
Wheel Weight Tool Panel Wedge Tool
• Easily removes and replaces wheel • Application:BENZ all model
weights, as well as cutting and crimping. • Used to remove the door
• Made of heat strengthened steel. panels and timbers or plastic
Included comfortable vinyl handle grips. on the dashboard
• With self-open function spring on the
handle for easier operation.
www.boxo-tools.com
09
VVB001
18Pc Brake Caliper Wind Back Tool Set
• Winds back brake piston for replacing brake pads.
• 15 special adaptors and reaction plate holder.
Brake Service & Hydraulic System
M 4 Z
• Left and right hand threaded screw and T-bar.
• Helps to prevent damages for pistons or seals. 0
VVB004
19Pc Extra Brake Caliper Wind Back Tool Set
• Extra 15 adaptors for VVB001
• Extra 4 different plate holders for different sizes of brake.
• Designed for push back and wind back broken piston.
www.boxo-tools.com
10
Adapter No. Application
B Ford (USA) Mercury, Monarch, Thunderbird; Lincoln Continental; Subaru 1600 Kombi(79-), 1.6-1.8 SRX, Kombi ('79-'83), 1800; ('84), 1800 Lim, Kombi, Tourismo
4WD ('82-'83), 1800GT, GTS; XT, Turbo ('85)
C Mini Austin; Nissan Primera (02); Opel Vectra 02-; Toyota Avensis
D Renault; Citroen BX ('83-), BX 16V ('88-);
H Peugeot 206 CC/Hdi/ Gti. A 16mm spanner is required with wind back pistons;
P VW. Nissan Premira 2.0, Bluebird; Opel Astrac Zafira (with Bosch rear Callipers); Vauxhall Astra G. Zafira
Q Subaru, Alfa Romeo 164 2.0 1; Fiat Uno, Turbo ie- Barchetta;Ford Escort 2000RS 16v , Mondeo. V6 24v; Honda Civic Vti.- CRX -Accord, Concerto S 1.6; Rover 220
C turbo (95); Saab 99L, 900 Turbo (74-81), 900 (81-87).
R Ford (Australia & NZ) Telstar, Laser; Mazda 323 Gti, GTX (86-), 929 (82-), RX7 (81-) 626 16V (87-), 626 GT (86-), 929 V6 (88-); Mitsubishi Gatant GLSi; Toyota
Celica, Corolla GT, MR2
S Audi 100TQi (91); BMW 740l 8 cyl. (91); Lancia Delta 1.9 TD (95);Proton 416; Renault-most models; Renault Laguna 2.0(94), Laguna 2.2D (95), Safrane 2.0-2.2 TD
V6; Rover 623 Si; Volkswagen Golf Gti Mk III & IV, Passat VR6, Vento GT (92)
T Renault/R21, Modus
V Renault Clio
W VW
VB004-4 Semi-circle holder
VB004-3 Open head medium holer
VB004-2 Open head small holer 8
VB004-1 Open head big holer
VVB006
Operation Instructions:
1.Choose an adapter suitable for working on the brake caliper
piston. Fit it onto magnetic adapter. Connect the tool to the
compressed air line, making sure that it does not exceed 8 bar
pressure. (Fig.1)
www.boxo-tools.com
2.Press the release button and operate lever to move the push
spindle forward or backward and fit the tool in to the caliper. Always grease all threaded
3.Press pressure button and rotating lever to rotate the brake bar & metal products
caliper piston. (Fig.2)
4.After pushing the piston backward, press release button and
pull lever to move the push spindle backward, releasing the tool
from the caliper. (Fig.3)
11
VVB003
High-Quality Brake Tool Set
• For brake maintenance / repair
Brake Service & Hydraulic System
D
Always grease all threaded
bar & metal products
VB003-4 VB003-6
Brake Bleeding Wrench Assembly Tool
• For brake bleeding without dismounting the wheels, replacement of • For installing and removing the draw spring of hand brake
wheel brake cylinder, master brake cylinder and tube connections shoes, e.g. on MERCEDES-BENZ passenger cars with rear
• Different hexagon size on both sides (10mm x 11mm), for Honda, disc brakes as well as on VW Crafter since 2006 and LT since
Mazda, Mercedes-Benz, Mitsubishi, Nissan, Peugeot, Renault, 1997
Suzuki, Toyota, Vo;vo, VW-Audi. • Hook with T-Handle
• Chrome-Vanadium
Applicable:
Honda, Mazda, Mercedes-Benz, Mitsubishi,
Nissan, Peugeot, Renault, Suzuki,
Toyota, Vo;vo, VW-Audi.
VB003-7 VB003-8
Brake Calliper File Brake Calliper Brush
• Extra slim style (width 10 mm), especially appropriate for • For removal of brake dust and dirt from the brake calliper
www.boxo-tools.com
12
VB003-9 VB003-11
Brass Brake Calliper Brush Brake Spring Pliers
• For cleaning aluminium brake callipers • For installing and removing the brake shoe recuperating
VB003-12 VB003-13
VVB005
Vacuum Brake Fluid Bleeder Set
• Brake Fluid Bleeder for the extraction of brake fluid
on wheel brake cylinders / brake callipers.
• Suitable for anti-lock brake systems
• By means of compressed air, the integrated Venturi-
system creates a vacuum, enabling thus the bleeding
of the brake system.
• With universal plastic nozzle, suitable for all
common vehicle types
www.boxo-tools.com
VB005-1:
• 1 litre capacity.
• Uses Standard Workshop air supply. VB005-1
VB005-2
• Refill container with flexible nozzle
VB005-2: VB424
• 1 litre capacity.
• Uses Standard Workshop air supply.
• Refill container with fix nozzle
VB424:
• Vacuum brake bleeder.
• 1 litre capacity.
• Uses Standard Workshop air supply. 1L Brake Fluid Supply 1L Vacuum Brake 1L Brake Fluid Supply
• Removes fluid via bleed nipples to allow
bleeding or entire fluid replacement. Bottle - Fix Nozzle Fluid Bleeder Bottle - Adjustable Nozzle
13
VB401 VB403~404
Disc Brake Piston Spreader Pentagon Brake Socket
• Fits in brake caliper to push back pistons for new brake • VB403: 19mm Pentagon Brake • VB404: 14mm Pentagon Brake
Brake Service & Hydraulic System
VB405 VB407
VB-407-1
VB-407-2
stones when not in use. and protects stones when not in use.
• For boring out brake cylinders. • For boring out brake cylinders.• For use
• For use with a standard drill. with a standard drill.
• Range: 3/4"~2-1/2"(19~64mm) • Range: 5/8"~2-3/4"(16~70mm) • Stone
• Stone size: 28.5 x 5 x2 (3pcs) size: 28 x 5 x2 (2pcs)
14
VB411 VB412
Brake Retainer Spring Compressor Brake Spring Compressor
• This tool's special head design and comfortable plastic handle,
VB416 VB425~427
INSTRUCTIONS :
1. To remove or install spring with
Brake Fluid Tester (Battery Included) Spring Brake Pliers pliers,place pointed end jaw on outside
of shoe,engage spring with hook end
• Identify percentage of water in brake fluid. jaw,and bring handles together to stretch
• Mades relining drum brakes easy. spring.
• Essential safety check. • Deep jaws clear shoe and strong 2. To remove anchor spring ,place cup
• Quick and simple tool. hook holds spring securely. end handle over anchor pin and rotate
tool so that tang goes under spring hook
• Colour coded LED's show level of water. • Handle ends remove and install and lifts if off pin.
• Battery supplied. anchor springs. 3. To install anchor spring,engage shoe
end of spring in shoe hole,pass notched
end handle through spring hook,catch
notch on pin,and pry tool until spring
snaps into place.
VB425 VB427
VB426
• Green: Battery Ok, i.e.: No water contained in the brake fluid. VB410
• Green/Yellow: Less than 1% of water content in brake fluid.
• Green/Yellow/Yellow: Approx. 2% of water content in brake fluid. Brake Retainer Spring Compressor
www.boxo-tools.com
15
VVS001
VVS002
Two Sets Bearing Separator Kit
• Two versatile gear and bearing splitters.
• Dropped forged and hardened.
• Bearing separator VA401 & VA402 inside( Sizes range from 30-
50mm and 50-75mm.)
• Pullout the bear with the H-type beam and bolts
• Complete set of accessories.
VVS003
Bearing Separator Kit
www.boxo-tools.com
B
Always grease all threaded
bar & metal products
16
VVS004
VVS005
www.boxo-tools.com
17
VVE001
5Pc Oil Filter Socket Set 3/8"
• 3/8” Drive. Drive
Engine Tools-Oil (Lubrication) System
VVE002
3/8"
Drive
9Pc Cup Type Oil Filter Wrenches Set
• Use with 3/8” Dr. or 21mm Spanner.
• Includes: VE002-1~8 and a specialized 21mm
Spanner
Applicable: BENZ,BMW,VOLVO,VW,FI
AT,RENAUIT,HONDA, MAZDA, NISSAN,
TOYOTA..etc
www.boxo-tools.com
VE003-14 3/8" 86 18 Alfa Romeo (petrol and diesel), Fiat, Seat, Mercedes-Benz,VW.Golf (MKIII. Tdi,passat Tdi,)Audi A6 Tdi, Renault
(Clio.Rapid 1.9 D Laguna.Safrane. Espace 2.1D), Cifroen, Peugeot, Renault
VE003-15 3/8" 93 36 Motorcraft only-(FL1A,FLA1B,FL300,Fl820), Ford
VE003-16 3/8" 76 12 Citroën Visa Dti AX/Saxo/ZX, Xantia, Peugeot 205/306/309/405/406/806, Renault Megane, Laguna 1.5/ 1.9/ 2.2/2.5
dCi engines, Mercedes-Benz, Fiat (z.B. Ducato, Scudo, Ulysee)
VE003-17 3/8" 108 18 Renault ( Espace,Laguna,Master,Safrane,Traffic 2.4 , 2.5, 2.8D,TD)
VE003-18 3/8" 96 18 Audi, Renault, Renault (1.5/1.9/2.2/2.5 dCi), VW(Passat 97 Tdi)
VE003-19 3/8" 86 16 BMW, Volvo(S40, S60, S70, S80.)
VE003-20 3/8" 66 6 Fiat (Punto,1.2), Renault Clio with Grove fi lters
VE003-21 3/8" 93 45 VW-Audi.(Tdi 2.4,2.6,2.8L)
VE003-22 3/8" 76 30 Motorcraft only- FL400A,Ford
VE003-23 3/8" 108 15 Volvo(C70/S70/V70/Tdi/TD/Turbo/Diesel/850)
VE003-24 3/8" 95 15 Transit vans, Toyota # 15600-41010, Alfa, GM, Ford, Chrysler
VE003-25 3/8" 106 15 Fiat (Ducato 2.5D. Td)
VE003-26 3/8" 93 15 Casite, Champ, Champion, GM, Fram, Hastings, Vauxhall/Opel, Mazada, Volvo, Mitsubishi, Purolator, Wix, Nissan,
VW, Porsche, Renault, Ford, Honda, Audi
VE003-27 3/8" 92 10 Cinquecento, Coupe, Croma, Fiat, Panda, Regata, Ritmo, Fiat, Seicento, Tempra, Tipo, Lancia (Beta.Dedra.Kappa.
Monte.Carlo.Prisma.Thema.Trevi), Volvo
VE003-28 3/8" 76 8 Fiat, Lancia, Moto Guzzi motorcycles
VE003-29 3/8" 65~120 - -
19
VVE046 3/8"
Drive
16Pc Cup Type Oil Filter Wrenches
Set-Euro Cars
Engine Tools-Oil (Lubrication) System
• These cup-type filters are made of 7 & 16 gauge construction and are
able to withstand up to 85 ft.Ibs of torque.
• Cup-type design grips like a socket minimizing the possiblity of crushing
filters.
• Fits 3/8" or 1/2" square drive tool Coated with electro-black oxide finish
for protection against rust.
• Includes: VE003-3 / 11 / 14 / 16 / 17 / 18 / 19 / 20 / 21 / 23 / 25 / 26 / 27
/ 28 / 29.
D
Applicable: Most Euro Cars in the world.
VVE047 3/8"
Drive
15Pc Cup Type Oil Filter Wrenches
Set - Japanese/ US/ AU Cars
• These cup-type filters are made of 7 & 16 gauge construction and are able to
withstand up to 85 ft.Ibs of torque.
• Cup-type design grips like a socket minimizing the possiblity of crushing filters.
• Fits 3/8" or 1/2" square drive tool Coated with electro-black oxide finish for
protection against rust.
• Includes: VE003-1 / 2 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 12 / 13 / 15 / 22 / 24 /29-2
Two Way Oil Filter Wrench (63-102mm) Self-Griping Oil Filter Wrench
• This oil filter wrench removes and tightens oil filters •For oil filters in areas with restricted access
VE411 VE412
Oil Filter Cartridge Wrench (Heavy Duty) Oil Filter Wrench - Reversible
•For oil filters in areas with restricted access • Special design allows the oil filter to be reversed
•Left-hand and right-hand operation and installed quickly and easily.
•Universal application • The steel jaws grips the fi lter without slipping.
•drive 1/2” 1/2" 95~165 • Fits sizes 60mm - 80mm.
• Can be used with all 1/2"D accessories.
•Suitable For Filter 95-165mm Drive mm
1/2" 60~80
Drive mm
VE421 VE422
Oil Filter Chain Wrench 350mm Oil Filter Chain Wrench 520mm
www.boxo-tools.com
• The cranked long handle on this oil fi lter wrench • The cranked long handle on this oil fi lter wrench
gives access to confi ned spaces.
60~105 gives access to confi ned spaces. 60~160
mm mm
• Size range 60mm-105mm. • Size range 60mm-160mm.
• Flexible offset handle for confi ned spaces. • Flexible offset handle for confi ned spaces.
• Duplex chain for strength | wipe clean plastic grip. • Duplex chain for strength | wipe clean plastic grip.
•Length of Chain: 350mm •Length of Chain: 520mm
21
VE423 VE424
Swivel Jaw Filter Wrench Pliers 57~120 Swivel Jaw Filter Wrench 80~190
mm mm
57~120mm Pliers 80~190mm
Engine Tools-Oil (Lubrication) System
• Jaws swivel 90° in either direction to access most oil and fuel filters. • Jaws swivel 90° in either direction to access most oil and fuel
• Works where other oil and fuel filter pliers and wrenches don't. filters.
• Jaws adjust to 4 positions, (30° increments) to fit most applications. • Works where other oil and fuel filter pliers and wrenches
• Slip-joint handle offers a big range from 2-1/4" to 4-3/4" (57mm don't.
to120mm). • Jaws adjust to 4 positions, (30° increments) to fit most
• Sure grip teeth prevent slipping. applications.
• Cushioned handles provide comfort. • Slip-joint handle offers a big range from 3-1/8" to 7-1/2" (80mm
to190mm).
• Sure grip teeth prevent slipping.
• Cushioned handles provide comfort.
Fiat Ritmo D 108mm x 18 Flutes VE003-17 Vauxhall/Opel Omega Di 16v Oil Filter Socket 36mm VE001-4
Fiat Scudo 108mm x 18 Flutes VE003-17 Vauxhall/Opel Vectra Oil Filter Socket 38mm VE001-5
Fiat Seicento 108mm x 18 Flutes VE003-17 Vauxhall/Opel Vectra B Oil Filter Socket 36mm VE001-4
Fiat Tempra 108mm x 18 Flutes VE003-17 Vauxhall/Opel Zafira Oil Filter Socket 32mm VE001-3
Fiat Tipo 108mm x 18 Flutes VE003-17 Vauxhall/Opel Zafira (1998>) Oil Filter Socket 36mm VE001-4
Fiat Ulysee 108mm x 18 Flutes VE003-17 Volkswagen 2.4 Tdi 108mm x 18 Flutes VE003-17
Ford Mondeo 2.0D 16v Oil Filter Socket 36mm VE001-4 Volkswagen 2.5 Tdi 108mm x 18 Flutes VE003-17
Ford Transit 2.5 | 2.0 Oil Filter Socket 36mm VE001-4 Volkswagen 2.8 Tdi 108mm x 18 Flutes VE003-17
Ford Transit Van Transit 93mm x15 Flutes VE003-24 Volkswagen Golf mkIII | Diesel 108mm x 18 Flutes VE003-17
Ford Vehicles with Duratorq Oil Filter Socket 36mm VE001-4 Volkswagen Passat D Turbo 108mm x 18 Flutes VE003-17
diesel engines
Honda Accord V type 100mm x 15 Flutes VE003-13 Volkswagen VR6 Oil Filter Socket 36mm VE001-4
Lancia Beta | Dedra | Delta | 108mm x 18 Flutes VE003-17 Volvo 850 Tdi | Td 108mm x 18 Flutes VE003-17
Kappa | Monte Carlo
Lancia Prisma | Thema | Trevi 108mm x 18 Flutes VE003-17 Volvo C70 Tdi | Td 108mm x 18 Flutes VE003-17
Mercedes-Benz A Class Oil Filter Socket 27mm VE001-2 Volvo S40 86mm x 16 Flutes VE003-19
Mercedes-Benz Sprinter 76mm x 8 Flutes VE003-28 Volvo S40 108mm x 18 Flutes VE003-17
Mercedes-Benz Vehicles with 116 mb Oil Filter Socket 36mm VE001-4 Volvo S70 108mm x 18 Flutes VE003-17
engine Vito Cdi
Peugeot 205 | 306 | 405 | 406 | 806 76mm x 12 Flutes VE003-16 Volvo S70 Tdi | Td 108mm x 18 Flutes VE003-17
Renault Clio 66mm x 6 Flutes - Ren VE003-20 Volvo S80 86mm x 16 Flutes VE003-19
Volvo V70 Tdi | Td 108mm x 18 Flutes VE003-17
22
VVE005
Engine Tools
• Works on both valves still seated or removed.
• For removing and installation of valve seal.
• Precision machined seal driving adapters for proper setting of
valve seal.
• Includes:
1-Valve stem seal plier. VE005-1B(standard),VE005-1A(option)
1-Drive handle 6”(150mm) long.
2-Deep seal driving sockets for seals O.D. 10.8-14.8mm
7-Seal driving adapters fit seals 5, 5.5, 6, 6.6, 7, 8 & 3/8”.
Part No. Applicable
VE005-1B VW-AUDI, FORD, OPEL, NISSAN, etc.
VE005-1A multi-valve engines, e.g. on OPEL, VW and FORD
VVE007
Valve Spring Compressor Set
• C Type
• Used for Car & Motorcycle.
• Pusher size: 16mm, 19mm, 23mm, 25mm, and
30mm.
• 5pcs pusher for fitting the valve spring correctly
and easier to compress the valve spring.
B
Always grease all threaded
bar & metal products
VVE008
Ignition Coil Puller - Volkswagen / Audi 1 2
• Three T-bar ignition coil pullers for use on Volkswagen and Audi
www.boxo-tools.com
VVE011
Glow Plug and Spark Plug Socket Set -
Extra Long (With Clip)
• Designed to grip plug being extracted.
• Sizes: 8mm | 9mm | 10mm | 12mm | 14mm |16mm.
• Extra long for greater access (6 x 3/8"DR. X 158mmL).
• Includes universal joint for restricted access.
• Includes VE011-1~6
Part No. Size(mm) Applicable
VE011-1 16 Alfa Romeo ,Fiat ,Ford ,Mazda,Citroen , Peugeot ,Honda
,Mercedes ,Nissan ,Vauxhall ,Parsche
VE011-2 14 Renault ,Citroen ,Peugeo
VE011-3 12 MERCEDES-BENZ 201 and 202 with 4 valve technique, OPEL,
BMW
FORDdiesel engines
VE011-4 10 VW, AUDI diesel direct injection engines TDi and MERCEDES-
BENZ CDI, SMART
VE011-5 9 OPEL, FIAT, ALFA, LANCIA diesel engines
VE011-6 8 MERCEDES-BENZ, SMART, VW, FIAT and OPEL with diesel
engines
VVE012
www.boxo-tools.com
• Set of 4 cutters.
Diesel Injector Seat Cutter Set • Used for re-cutting injector seats when reconditioning the diesel injectors.
Supplied In
PowerCase
Available Drawer
-75H of all BOXO
cabinets
Engine Tools
• Also removal and replacement of fan hubs.
Applicable:
BMW, Ford, Fiat, Mercedes-Benz, Volkswagen, Opel
VE017-1 VE017-2
Fan Clutch Tools (BMW) Fan Clutch Tools (Benz)
• Removes lock nuts on the thermo- • Removes lock nuts on thermo-Viscous fans found on Ford,
Viscous fans found on Ford, Mercedes…many vehicles.
BMW…many vehicles. • Size: 36mm
• Size: 32mm
VVE018
Radiator pressure tester Set
• To test water tank and density of water tank cover.
• Content of this radiator pressure tester:
#0 - Needle thermometer.,
#1 - Pressure Testing Pump with Gauge (gauge reading from 0~35 psi)
#2 Radiator Cap adaptor (GM)
#2A-Black connector avaiable for radiator Cap #3(R123) & # 4 (R124).
#2B-Blue connector avaiable for radiator #3(R123) & # 5 (R125)..
#3 R123 Test Cap adaptor
#4 R124 Test Cap adaptor
#5 R125 Test Cap adaptor
www.boxo-tools.com
25
VVE019
Universal radiator pressure tester Set
(Delrin Plastic-NYLON 66)
Engine Tools
fig1 fig2
VVE034
17Pc Drain Plug Key Set
• A set of popular keys for draining differentials | sumps | axles | gearboxes
on most modern vehicles.
• Now includes 10mm (f) square, the latest triangular in 3/8"D and Spline Bit M16.
• Hex sizes: 6 | 8 | 9 | 10 | 12 | 13.1 | 14 | 17mm.
• Square sizes: 7 | 8 | 9.5 | 10 | 11 | 13.1mm.
Size Vehicle
www.boxo-tools.com
26
VVE035
1 2 3 4 5
7Pc Oxygen Sensor Socket Set
• For use on lambda sensors (oxygen sensors).
Engine Tools
• This tool covers a wide variety of options and fits most heated and
non-heated sensors.
• Include VE035-1~7 & Sizes:
1/2"Dr. x 29mm x 90mmL (7mm Slot) / 3/8"Dr. x 7/8"(22mm) x
90mmL (20mm Slot)
1/2"Dr. x 27mm(12PT) x 82mmL / 3/8"Dr. x 7/8"(22mm) x
80mmL (7mm Slot) 6 7
3/8"Dr. x 1-1/16" x 74mmL / 1/2"Dr. x 7/8"(22mm) x 50mmL /
3/8"Dr. x 7/8"(22mm) x 31mmL
VE035-1 1/2" 29
VE035-2 3/8" 22 Mitsubishi, Nissan, Ford, GM, Chrysler, Volkswagen, Audi Group
VE035-3 1/2" 27 BMW diesel M21& M51, FORD diesel LINCOLN Continental (USA), LINCOLN Mark VII, VIILSC
VE035-4 3/8" 22 Japanese cars, Nissan,VW, Seat, Skoda, Ford, GM, Chrysler & other cars.
VE035-5 1/2" 1-1/16" inch 2.0, 2.3, 2.5, 2.8, 3.0L GM’s cars.
VE035-6 1/2" 22 VW-Audi, BMW, Mercedes, Ford, Opel/Vauxhall, Peugeot, Citroën, Renault, Seat, Skoda, japanese cars, etc.
VE035-7 3/8" 22 VW-Audi, BMW, Mercedes, Ford, Opel/Vauxhall, Peugeot, Citroën, Renault, Seat, Skoda, japanese cars, etc.
VVE039
Automotive Vacuum & Pressure Tester
This vacuum and pressure pump creates and holds a metered vacuum
for testing a widevariety of automotive, marine, aircraft and agricultural
equipment. A complete kit for vacuumtesting and one-man brake bleeding.
Applications:
• Automatic transmission. • Vacuum reservoirs.
• Air conditioning and heating. • Heater cones.
• Brake systems including ABS and conventional.
• Engine management systems. • Emission control systems.
• Engine management including cylinder heads.
• Ideal for a wide range of applications on many vehicles.
• Piston ring retainers on diesel engines.
• Waste gases on turbo chargers.
www.boxo-tools.com
27
VVE040
• For Testing:
- Automatic transmission / Vacuum Modulators
- Body and Accessories / Vacuum reservoirs / Air Conditioning &
heating / Heater cores
- Brake Systems / Antilock Brake System / Conventional Brake
System / Power Brake System
- Computerized Engine Control System / Ford EEC-III and MCU
System / Chrysier Electronic Fuel Control System / American
Motors engine Controls
- Emission Control System / Heated-inlet Air System /
EGR(Exaust Gas Recirculation) System
Applicable:
VW-Audi, Porsche, Chrysler, Daihatsu, Nissan, Toyota,
Peugeot, Citroën, Renault, BMW, Mercedes, GM Opel/
Vauxhall, Rover, Saab, Volvo
VVE041
Engine Oil Pressure Tester
• Designed to check engine oil pressure in both cars and trucks.
Read dual scale gauge easily. Complete with 24” (600mm) of oil
www.boxo-tools.com
28
VVE044
Gasoline Cylinder Compression Tester
• Stem with release valve and quick release chuck for attaching fittings.
Engine Tools
• Displays in psi / bar (0-300psi).
• Complete with M10 | M12 | M14 long reach adaptors.
• The fl exi hose is fi tted with a dual M14 | M18 adapt.
• This product can be used on a wide variety of petrol.
• The set is complete with spare washers.
Instruction
1. Preparation
• Stop engine the disconnect the spark plug and the connecting wire. (Fig.1)
• Choose an appropriate adapter and hose, attach them into cylinder.
VVE045
Piston Service Tool Set
• Piston ring compressor w/ratchet key. 2 3
H:3''(53-125mm) , H:3-1/2''(90-175mm) , H:4''(90-175mm)
• Hose Clamp Pliers capacity:50-100mm.
• Piston ring groove cleaning tool
Fits : 2''- 5''(51 to 127mm) 1
Blade 1 size:1/16'' to 3/16'' / Blade 2 size:2.0mm to 4.5mm , 1/4'' 4
/ Blade 3 size:1.2mm to 5.5mm
• Offset screwdrivers: +
׀
Include: VE045-1~5
VVE048
www.boxo-tools.com
•Designed to repair threads for the most commonly used metric bolt
sizes.
•Fits M5, M6, M8, M10 and M12 sizes.
•Bring damaged threads back to the original thread size and better
than new using stainless steel inserts
•Includes 110 assorted stainless steel(SUS304) coils included : 25 pc
each of M5-0.8x1.5D, M6-1.0x1.5D, M8-1.25x1.5D, M10-1.5x1.5D,
and 10 pc of M12-1.75x1.5D
•Includes HSS drill bits, HSS taps, tang punchers and coil insert tools
for M5, M6, M8, M10, M12
•Metal storage case
29
VE430 VE434
2Pc Valve Grinders Air Valve Lapper
•For hand grinding flat head, unslotted valves. Synthetic •This high quality simple tool can quickly and effectively grinds
Engine Tools
rubber vacuum cups are resistant to oil, grease, gasoline valves in seconds.
and are replaceable. Comes with 16, 20, 30 and 35mm sucker heads to fit most valves.
• Sizes: 16, 20, 29, 35mm diameter cups.
• For grinding and lapping valves.
• Time saver
VE439 VE440
In-line Ignition Spark Tester Spark-Plug Socket 14mm - Magnetic
• Instructions included on packaging. • With a magnetic insert the spark plug can be removed
• Metal to HT lead connector. quickly and efficiently.
• Rubber connector • Ideal for deep seated spark plugs.
• Flash indicator • size: 3/8"Dr. x 14mm x 12PT x 250 mm long.
Applicable:
BMW E 90 N 54 engine,
335 ilimousine since 2006,
RENAULT Modus,
Twingo, Clio, Kangoo with 1.2
16 V engine, PEUGEOT 207,
307, CITROËN C4 with 1.4
and 1.6 l 16 V engine, C5 with
2.0 HPi engine as well as on
MERCEDESBENZ engine M
156, engine M 276, NISSAN
Micra, Note, MINI 1.2 – 1.4 l
4-cyl. since 2007
VE441 VE452
Diesel Injector Puller TDC Timing Degree Wheel
• Includes M8 | M12 | M14 adaptors.
www.boxo-tools.com
30
VE462 Applicable: VE469
Beetle 1998 on, Bora
VAG Multi Purpose up to 05, Corrado up to
1995, Eos 2006 on,
Piston Ring Compressor
Tensioner Wrench Golf up to 2008, Jetta
up to 2009, Passat • With Hex key for tensioning
Engine Tools
2005 on, Sharon 2005 • May be locked continuously
• Similar to the VE459, VE460 and VE461 • High-strength spring band steel
above but specific to later engines. on, Touran up to 2009,
Transporter up to 2010, • Safety Valve locking prevents
• Multi-fit tensioner wrench with an Codes 1.6D/P, 1.7D, premature release and allows positive
adjustable head position. Used across the 1.8P, 1.9D, 2.0D/P locking action.
• 75mm height, Capacity: 53-125mm
VAG range.
VE470 VE471
Piston Ring Compressor Piston Ring Compressor
• With Hex key for tensioning • With Hex key for tensioning
• May be locked continuously • May be locked continuously
• High-strength spring band steel • High-strength spring band steel
• Safety Valve locking prevents premature • Safety Valve locking prevents
release and allows positive locking action. premature release and allows positive
• 75mm height, Capacity: 90-175mm locking action.
• 100mm height, Capacity: 90-175mm
VE472 VE473
Piston Ring Compressor Angular Torque Gauge
www.boxo-tools.com
VE476 VE477
Flexible Hose Clamp Set Belt Tension Gauge
• Ideal for use on flexible hose lines • It can be used to
adjust the tension on Applicable:
on brakes | fuel | heater | radiators.
the cam belt where the Audi, Ford,
• Lightweight | non-conductive
material. movement of timing belt Opel, VW…
• High-vis colour for easy location. is measured by load. etc.
• With jaws of 1/2" to 3/4" diameter. • Suitable for use on
various cam belt widths.
• Clear incremental
marking with knurled
knob for precise
measurement.
• Dual scale allows
reading from top or
bottom of tool.
•A simple and effective
means of measuring the
tension on a drive belt.
•This tool measures the
tension on the belt by
measuring its deflection
for a given load.
VE486 VE489
Angle Tip Lock Ring Pliers Gasoline Tube Street Dismantles To
• Used to spread snap rings found on Unload Pliers
www.boxo-tools.com
32
VE490 VE498
Engine Cylinder Hone Engine Cylinder Hone (57~127mm)
(50~178mm)
Engine Tools
• Clean and de-glaze cylinders
• Clean and de-glaze cylinders of carbon deposits quickly and
effectively. of carbon deposits quickly and
• Bore diameter 50 -178mm. effectively.
• Use with cordless drill for speedy results. • Bore diameter 57 -127mm.
• An indispensable tool for engine overhauls. • Use with cordless drill for speedy
• Enables the inside surface of engine cylinders to be cleaned of results.
carbon deposits and re-surfaced quickly and effectively. • An indispensable tool for engine
• Range: 2"~7"(50~178mm) overhauls.
• Stone size:100 x 10 x8 (3pcs) • Enables the inside surface of
engine cylinders to be cleaned of
carbon deposits and re-surfaced
quickly and effectively.
• Range: 2-1/4"~5"(57~127mm)
• Stone size: 76 x 11 x 6.3 (3pcs)
VE499
Engine Cylinder Hone (32~89mm)
• Clean and de-glaze cylinders of carbon
deposits quickly and effectively.
• Bore diameter 32~89mm.
• Use with cordless drill for speedy results.
• An indispensable tool for engine overhauls.
• Enables the inside surface of engine
cylinders to be cleaned of carbon deposits
and re-surfaced quickly and effectively.
• Range: 1-1/4"~3-1/2"(32~89mm) • Stone
size:50 x 8 x 5 (3pcs)
VE492 VE-497
8.5L Pneumatic Fluid Extractor 10L Hand operation fluid extractor
• Capscity 8.5L for extracting somekind car engine oil. • Capacity:10L • Non-spark.
• Pneumatic extractor non-spark. Non-power fluid extractor.
• One man in same step operate. • Three air outlets with check
• 1 Meter silicon hose with universal rubber adapter can valve design for quick & easy
fit most t[ye brake fitting. to release the air from the
• Fixing valve & safety cup for automatic CUT-OFF
extracting. extractor.
• Air inlet : 1/4" • Easy to operate suitable for
• Avg. Air Cons : 4.5 CFM engine oil, gear oil ,brake fluid,
• Working Pressure : 40~170 PSI water.
www.boxo-tools.com
33
VE494 VE495
Adjustable Hose Remover Adjustable Style Hose Remover
• Adjustable to fi t hoses 48mm - 115mm diameter. •This tool specifically designed for removing hoses, quick and easily
Engine & Clutch Tools
• Special profi le jaws grip securely. loosens and removes hoses with a simple forward and backward motion
• Fitted with removable cable for pulling stubborn hoses. •Without needing screwdrivers and multi-grip pliers, no more torn hoses,
• Soft grip handle for easy comfortable use. no more damage to plastic couplings
• Suitable for use on a wide range of applications. •Tool consisting of a body and moving jaw that adjusts to fit hose
diameter between φ 24 to φ 53MM
VE496
VVC001
Operation:
Before removal, pre-tension the clutch pressure plate by means of the
clamping device.
1. For this purpose unscrew the three fastening screws and screw three
thread bolts in their place. Place the pretension jack on the thread bolts
and fix them with the knurled nuts. Screw the compression strut to the
clamping device until the diaphragm spring reaches the limit stop. Screw
out the remaining fastening screws, unstress the diaphragm spring and the Always grease all threaded
pretension jack and remove Blow Mould Case packing Only bar & metal products
the clutch pressure plate.
2. Centering clutch plate: Insert the centering tool and the clutch plate Applicable:
together with a suitable centering dome into the fly wheel. 3-hole division:VW-Audi, BMW, Mercedes, Volvo, Opel/
3. Putting on pressure plate: Put the pressure plate on the fly wheel and Vauxhall, Renault etc.
install the clutch pretensioner as during removal. 4-hole division: MERCEDES BENZ, type 169 since
4. Stress the diaphragm spring up to the limit stop position and screw the 2004 (A-class)
relative fastening screws.
34
VVC003
Universal Clutch Alignment Rectifier Set
Clutch Tools
• Available for manual passengers and small trucks(below 3500c.c).
• Available for manual transmission system: Nearly all vehicles with single
disc & Some vehicles with double discs.
• Not suitable for DSG(Double clutch) system.
VVC006
35
VVD002
Applicable:
Audi, Becker, Blaupunkt, BMW, Ford,
Grundig, Mercedes-Benz, Skoda, VW, 2-1 1-9 1-8 1-7 1-6 1-5 1-4 1-2 1-3 1-1
Porsche
VVD005
1 2 3 4 5 6 7 8 9 10 11
23Pc System Release Tools
• For a damage-free releasing of e.g Flat plug contacts.
• Connection defects and corrosion can be repaired fast
and easily.
• Assortment with 23 parts for the universal application in
the motor electric sector.
B 18 15
Body / Interior
• 3/8"(10mm) Ratchet Wrench
• 5/16"(8mm) GM Battery Terminal Wrench
• 3/8"(10mm) GM Battery Terminal Wrench
2
1
B
Always grease all threaded
bar & metal products
Part No. Size Part Name
inch / mm
VD006-1 - Angle Nose Plier
VD006-2 - Side Terminal Cleaner
VD006-3 - Terminal Cleaner with Side Terminal Brush
VD006-4 - Self-Locking Pole and Battery Terminal Puller
VD006-5 3/8" / 10 mm Ratchet Wrench
VD006-6 5/16" / 8mm GM Battery Terminal Wrench
VD006-7 3/8" / 10mm GM Battery Terminal Wrench
VVD010
Auto Circuit Tester with LED display Set
(6~24V)
•Design to test the system without re-connection between the
vehicle battery and the testing components.
•Test the automotive electrical system within 6 to 24V.
•Determine the polarity and circuit circumstance (short/open).
•Activating the components with positive or negative current
without jumper wire.
•Testing the voltage and continuity of the circuit .
•Include a cigarette lighter adapter, a hook-up clip, and extension
20 feet lead.
VVD011
Multi-Function Auto Circuit Tester with
LCD display (6~24V)
•Four Modes:Measure Voltage(0-60V)/Locate Missing Cylinders/
Measuring rotational speed/Peak Detection
www.boxo-tools.com
Measuring Method:
-->1-Cylinder gasoline engine
-->Distributor type multi-cylinder gasoline engine
-->Where all the high-tension wires of cylinders are bundled together.
-->High-tension wire connecting distributor and ignition coil.
A
37
VVD012
Trim Pin Removers Set
• Blades are made from stainless steel with heat treated.
Body / Interior
VD013-13
5Pc Handy Remover Set
• For plastic upholstery fasteners.
• Place tool under edge of door panel and insert into fastener
as fast as pobbible, and then simply pry up.
• Large support area to protect clips and pad.
13-10
13-7
13-9
13-8
13-11
www.boxo-tools.com
38
VVD014 4
6
Window Removal Kit Set
• Suitable for all glued windscreens as well as for most side and rear 5
Body / Interior
windows
• Cutting wire for fast and easy cutting of nearly all adhesive beads
• Wire Starter Tool made of spring steel with large T-handle to pierce 1
the wire through the bead.
• Self-closing safety pull handles hold the cutting or sawing wire 3 2
firmly.
•Includes VD014-1~6.
2
B
VD014-2 2 pcs Wire Grip Handle Set
VD014-3 Standard Cold Knife
VD014-4 T-Handle Handled Wire Starter Tool
VD014-5 Moulding Release Tool
VD014-6 Door Upholstery Remover
VVD015
Universal Axles Slide Hammer Set
• Increased the coverange with the two
axle pullers.
• Works together with other tools is
easier.
• Included 3-jaw puller and many types
of joint.
VVD016
Dent Puller Set
www.boxo-tools.com
39
VVD020
19-3
7Pc Air Bag Removal Tool Kit
• 7 specifi cally designed pieces for removing air bags. 19-4
Body / Interior
• Specialist tool.
• Help prevent damage to expensive SRS components..
19-6
• Warning: always follow vehicle manufacturer's instructions when
working with SRS systems. 19-7
19-5
Fitted with 19-2
VD019-1 : For VW GOLF 4 (BJ,1998-2004), VW PASSATAB
BJ. 1997, BORA AB BJ.19991 19-1
VD019-2 : Airbag removal tool is used to remove
driverairbag from steering wheel on 1999-04 new body style
VW PASSAT , JETTA, GOLF & BEETLE.
VD019-3 : For VW PASSAT B5, POLO,LUPO; AUDI
A4,A6;SKODA SUPERB.
VD019-4 : For VW GOLF 4, NEW BEETLE,SEAT,SKODA
FABIA, OKTAVIA AB BJ . 991
VD019-5 : For VW-MODELLE U.A: PASSAT AB BJ. 2000 Available Drawer
VD019-6 : 1/4"Dr. x 87mm(L) Bit Socket - T30 ( For AUDI, Supplied In
PowerCase -75H of all BOXO
OPEL, RENAULT, VW ) cabinets
VD019-7 : 1/4"Dr. x 87mm(L) Bit Socket -T25 ( For BMW )
A
VD409 VD410
VD416
40
VD421 VD422
Heavy Duty Scraper Super Scraper Set
•Sharp,hardened steel blades remove carbon, old gasket • Ideal for removing trim, badges and decals from bodywork.
Body / Interior
material, sludge and other hard-to-clean substances. •Also suitable for removing residue from alloy wheels.
•Comes complete with three blades. •Sharp,hardened steel blades remove carbon, old gasket
•Overall length: 11" material, sludge and other hard-to-clean substances.
•Includes: VD418 & VD421
VD423 VD424
Window Scraper Razor Scraper Blade (30 pcs)
• Offset Scraping head and short handle are great for tight • For replace razor blades.
scraping jobs. • Fit with VD421 & VD423
• Overall length: 4"
VD427
Circuit Tester for General and Hybrid Car
• Compatible with voltage 12V system plus newer 42V system.
• Safe for low current circuit since tester only draws 3 milliamps at
www.boxo-tools.com
12V.
• Automatic voltage identification with blue for 12V and red for 42V
systems.
• Two super-bright LED for visibility under alll conditions.
• New crystal-clear handle provides 360° visibility, even under bright
light.
• Extra-long 12' coil 3-1/2" probe length 7-1/4 overall length.
• Cord remain flexible in low temperatures.
41
VD428 VD429
Cordless Circuit Tester (3~28V) Car Check Tester (6~48V)
• Detects from 3 to 28 volts. • To test for voltage presence of a low voltage electrical
Body / Interior
VD467 VD468
Car Body File Holder Automatic Welding Slide Hammer
• Aluminium body, for 14" flexible file.
• Full length:435mm
• Adjustable, with tightening screw
• Connect the positive handle of
• With 1 file blade(9TPI)
welding machine into the connector.
• To weld and slide the hammer at
the same time.
VD469 VD470
Slide Hammer Hook 2Pc Rubber Ring Hook
• Full length:435mm Puller Set
• To pull out the washer which welding in the indentation • For quick and easy removal and
replacement of the exhaust mounting rubbers.
• 2 Sizes : Hook length-17 mm
www.boxo-tools.com
Hook length-40 mm
Applicable:
Hook length-17 mm :
VW-Audi, Mercedes, Opel,
Japan vehicles, etc.
Hook length-40 mm:
Ford, BMW, etc.
42
VD477 VD478
Professional Suction Cup - Twin Body and Fender Dent Puller
• Lifting capacity 80kg. • Removes dents without removing the interior panels and upholstery
VVG002
14Pc Screw Extractor Set
• To extract screws, nuts and bolts when locating threads or hexagons
are damaged.
• Due to the special insert design (tapered and special left section)
both screws and nuts and bolts can be easily loosen and removed.
• Supplied tools (insert dimensions): Drive: 1/2
• Size: 10,11,12,13,14,16,17,18,19,21,22,24,27mm+ a bar
• Material:SNCM439※Hardness:50~53 degree
A
Always grease all threaded
bar & metal products
VVG003
9Pc Hose Clamp Pliers Kit Applicable:
Alfa Romeo, Audi, Citroën, Fiat, Ford,
• For replacement of hose-clips on Fuel-lines, Oil-pipes and water- Hyundai, Lancia, MAN, Mercedes, Opel/
hoses. Vauxhall, Peugeot, Porsche, Renault, Seat,
Toyota, VW, Volvo, etc.
• Special design allows the spring hose clips to be securely gripped
and safely expanded.
• Contents different styles of hose clamp pliers which will service most
of the flat-band ring style and CLIC-R hose clamp, also others.
• Includes seal puller, Slot Driver and VG003-1~7. 2
www.boxo-tools.com
3
Supplied In Available Drawer
PowerCase -75H of all BOXO
cabinets
43
VVG004
3Pc CV Banding & Cutter Tool Set
General Tools
VVG005
C
www.boxo-tools.com
44
VG401 VD402
CV Boot Clamp Pliers (Heavy Duty) CV Boot Clamp Banding Tool
General Tools
• For fitting stainless steel bands on drive • Work on all CV Joint with band-type boot clamps.
shafts where a torque setting is specified. • This tool provides fast installation of clamps with ease.
• Heavy duty pliers. Applicable: • This is a small, inexpensive functional tool for 1/4" &
• Can be used by hand or with the
assistance of a power bar. VW-Audi, Ford, Opel/ 3/8" width band.
• Can also be used with BOXO Torque Vauxhall etc.
Wrench.
VG403 VG404
Universal Boot Hose Clamp Cutter Universal CV Boot Clamp Pliers
• To open or cut „earless“ Hose-Bands • For earless-type clamps.
• A sturdy, low-cost tool.
on CV-Joints, Drive-Shafts, Radiator • Works on earless-type clampsn
Hoses, Fuel-lines, etc. axle collars, water and fuel hoses.
• Designed easy to cut the stainless
clamp.
Applicable:
• Avoid hurting C.V. Boot
• Width:Under 10mm Specially suitable for
• Thickness: Under 0.5mm~0.7mm VW-Audi etc.
VG405 VG407
CV Boot Clamp Pliers Exhaust Clamp Spreader
www.boxo-tools.com
Applicable:
Citroën | Peugeot |
Renault
VG411 VG412
Hose Clamp Pliers Piston Ring Pliers
• This tool can be used to move Clamp Hose • Make installing piston rings safe and
• As the tooth edge design of lattice-like, so easy without over-expending rings.
its use does not fall off. • Works on most common piston diameter.
• Lattice-shaped tooth design, horizontal, • Tapered jaws to remove and install most
oblique, longitudinal direction of the use of passenger car and light truck rings
either.
• Install 12-47mm the soft tube of the • Capacity: 3/64” to 1/4” thickness.
diameter.
VG414 VG415
Seal Puller Set Pick and Hook Set
www.boxo-tools.com
• Quickly and easily remove O-Ring or • Straight and curved hooks, long
grease and oil seal. fine tips.
• No space limitation; Unique design of • Packed in handy storage wallet.
"curled" head. • 90° and 45° hooks.
• Special angle on the tool head provides • Ideal for precision work in
a better work.
automotive | electronics.
• Use for detail works and
scribing, picking jobs.
46
VG416 VG420
8Pc Mini Pick & Driver Set 10L Pressure Fluid Dispenser
• Set contents – Straight, Hook, Combination, 90°, Phillips#0, • Adopt durable polyethylene material.
Slotted1/8”, Star T-15, Star T-20
General Tools
• Venturi design with air power operated.
•Heat treated. Chrome plated, chrome vanadium steel, shafts w/
magnetic tips. • Capacity: 10L
• Hooks and picks for use on cotter keys, O-Rings, sprins, snap rings. • Maintenance free/Easy dispensing job./
• Screwdrivers, for use on electric Appliances in home, shop and Safety valve design
workplace.
• Cellulose acetate plastic handles.
VG421 VG426
4Pc Pry Bar Set 4Pc Stud Extractor and Inserting
Set consists of four hard wearing
pry bars applicable for a number
Tool Set
of different jobs. e.g. •For removal and replacement of threaded studs (left or right
• Dismantling stubborn handstuds)
components. •Special designed for using on screw damaged or without head to
• Positioning components. screw up and pull up.
• Holder components in required •Size: 1/2"Dr. : 6, 8, 10 & 12mm
position.
• Spreading clamp-fixtures, etc.
VG422--> Size: 24"
VG423--> Size: 18"
VG424--> Size: 12"
VG425--> Size: 8"
47
BXI-016
16Pc Insulated Tool Set
in BOXO Fabric Tool Box
Insulated Tools
Description
1000V Insulated Screwdriver SL8x175mm, SL4x100mm, SL5.5x125mm, SL6.5x150mm
1000V Insulated Screwdriver PH1x80mm, PH2x100mm
1000V Insulated Cutting Plier 6"(160mm)
1000V Heavy Duty Insulated Cutting Plier 7"(180mm)
1000V Insulated Combination Pliers 7"(180mm)
1000V Insulated Wire Stripper 6"(160mm)
1000V Insulated Cable Cutter 235mm
1000V Insulated Adjustable Wrench 30mm
1000V Electrician's Knife
Electrical Tape 20M
Multi-function tester 12V~690V(LED)
Foldable Plastic Ruler 2M
BXI-044
44Pc Insulated Tool Set
in BOXO Fabric Tool Box
• For fitting electrical gear & workshop or on-site electrical work
Description
1000V Insulated Screwdriver SL8x175mm, SL3x100mm, SL4x100mm,
SL5.5x125mm, SL6.5x150mm
1000V Insulated Screwdriver PH0x60mm, PH1x80mm, PH2x100mm
1000V Insulated Cutting Plier 6" (160mm)
1000V Heavy Duty Insulated Cutting Plier 7"(180mm)
1000V Insulated Combination Pliers 7"(180mm)
1000V Insulated Wire Stripper 6"(160mm)
1000V Insulated Cable Cutter 235mm
1000V Insulated Round nose Pliers 160mm
1000V Insulated Adjustable Wrench 30mm
1000V Electrician's Knife
Electrical Tape 20M
Multi-function tester 12V~690V(LED)
Foldable Plastic Ruler 2M
Circuit Tester 6~24V
1000V Insulated Open Wrenches 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm,
14mm
1000V 3/8"DR.Ratchets
1000V 3/8"DR.Extensions 150mm, 250mm
1000V 3/8"DR.T-Handle
1000V 3/8"DR.Sockets 8mm, 10mm, 12mm, 13mm, 14mm, 17mm, 19mm, 22mm
1000V 3/8"DR.Hex Bits Sockets 4mm, 5mm, 6mm, 8mm
BXI-012
www.boxo-tools.com
Description
1000V Insulated Screwdriver SL2.5x75mm, SL3x100mm, SL4x100mm
1000V Insulated Screwdriver PH0x60mm, PH1x80mm
1000V Insulated Cutting Plier 6"(160mm)
1000V Insulated Combination Pliers 7"(180mm)
1000V Electrician's Knife
Electrical Tape 20M
Mini Cutting Plier 115mm
Mini Long-Nose Pliers 135mm
Cut & Strip Regular Wire
48
BXI-038
38Pc Electro-technical Maintenance Tool
Assortment for Hy-brid
Insulated Tools
Description
1000V Insulated Screwdriver SL8x175mm, SL2.5x75mm, SL3x100mm, SL4x100mm,
SL5.5x125mm, SL6.5x150mm
1000V Insulated Screwdriver PH0x60mm, PH1x80mm, PH2x100mm
1000V Insulated Cutting Plier 6"(160mm)
1000V Heavy Duty Insulated Cutting Plier 7"(180mm)
1000V Insulated Combination Pliers 7"(180mm)
1000V Insulated Wire Stripper 6"(160mm)
1000V Insulated Cable Cutter 235mm
1000V Insulated Round nose Pliers 160mm
1000V Insulated Adjustable Wrench 30mm
1000V Electrician's Knife
Electrical Tape 20M
Multi-function tester 12V~690V(LED)
Foldable Plastic Ruler 2M
Cut & Strip Regular Wire
1000V 3/8"DR.Ratchets
1000V 3/8"DR.Extensions 150mm, 250mm
1000V 3/8"DR.T-Handle
1000V 3/8"DR.Sockets 8mm, 10mm, 12mm, 13mm, 14mm, 17mm, 19mm, 22mm
1000V 3/8"DR.Hex Bits Sockets 4mm, 5mm, 6mm, 8mm
1000V 3/8"DR. Torque Wrench 5-25N-M
WR1013I-010 PRCCI-011
1000V Insulated Adjustable Wrench 1000V Insulated Copper and
30mm aluminium cable cutter 235mm
• With VDE insulation as per DIN EN 60900 • Handles with VDE insulation as per DIN EN 60900
• Finger stops • For cutting multi-strand copper and aluminum cables
• 2-colour warning" insulation • Cutting edges inductively hardened
• Precision ground for a clean, smooth cut
• Less force required due to the optimum lever action and new
cutting-edge geometry
www.boxo-tools.com
CUTKI-06
49
www.boxo-tools.com
www.boxo-tools.com