Professional Documents
Culture Documents
Omm Crane Kobelco Cks 1100
Omm Crane Kobelco Cks 1100
Model : CKS1100
3 SPECIFICATIONS
5 GENERAL DIMENSIONS
7 WORKING RANGES
10 SUPPLEMENTAL DATA
11 LIFTING CAPACITIES
17 LIFTING CAPACITIES
19 LIFTING CAPACITIES
21 LIFTING CAPACITIES
22 TRANSPORTATION PLAN
3
Lower Structure Weight
Steel-welded carbody with axles. Crawler assemblies can be Including upper and lower machine, 34.6 ton counterweight and
hydraulically extended for wide-track operation or retracted for 6.5 ton carbody weight, basic boom (or basic boom + basic jib),
transportation. Crawler belt tension is maintained by hydraulic hook, and other accessories.
jack force on the track-adjusting bearing block. Weight: 102 ton
Carbodyweight: 6.5 ton Ground pressure: 95.4 kPa
Crawler drive: Independent hydraulic propel drive is built into
each crawler side frame. Each drive consists of a hydraulic Attachment
motor propelling a driving tumbler through a planetary gear
box. Hydraulic motor and gear box are built into the crawler side Boom & Jib:
frame within the shoe width. Welded lattice construction using tubular, high-tensile steel
Crawler brakes: Spring-set, hydraulically released parking chords with pin connection between sections.
brakes are built into each propel drive.
Steering mechanism: A hydraulic propel system provides
Boom and Jib length
both skid steering (driving one track only) and counter-rotating
steering (driving each track in opposite directions). Min. Length Max. Length
Track rollers: Sealed track rollers for maintenance-free (Min. combination) (Max. combination)
operation. Crane Boom 15.2 m 70.1 m
Shoe (flat): 900 mm wide each crawler Fixed Jib 27.4 m + 9.1 m 61.0 m + 21.3 m
Max. gradeability: 40%
4
GENERAL DIMENSIONS
(Unit: mm)
4,430
900
0
,86
R4
40
,2
15
O M
BO
C
SI
6,090
BA
3,360 1,100
2,990
1,495
940
7,380
2,030
3,500
450
2,200
1,270
5,800 3,500
6,770 (CRAWLER RETRACTED)
5,300
(CRAWLER EXTENDED)
This catalog may contain photographs of machines with specifications, attachments and optional equipment.
L L’
Hook L
110 t hook 4.2 m Hook L’
70 t hook 4.1 m Ball hook 3.6 m
35 t hook 3.9 m 35 t hook 3.9 m
5
BOOM AND JIB ARRANGEMENTS
15.2 (50) B T
48.8 (160) ※ B 10 20 40 40A T
18.3 (60) ※ B 10 T
※ B 10 10 20 40 40A T
※ B 10 10 T
51.8 (170) B 20 20 40 40A T
21.3 (70)
B 20 T
B 40 40 40A T
24.4 (80) ※ B 10 20 T
※ B 10 20 20 40 40A T
54.9 (180)
※ B 10 10 20 T B 10 40 40 40A T
27.4 (90) B 20 20 T
※ B 10 10 20 20 40 40A T
B 40A T
※ B 10 20 20 T
B 20 40 40 40A T
30.5 (100)
B 10 40A T
※ B 10 10 20 20 T
※ B 10 10 20 40 40 40A T
B 20 40A T
※ B 10 10 20 40A T
※ mark shows the standard boom arrangement which make the boom arrangement
B 20 40 40A T
of less than the each boom length possible.
mark shows the installing of the cable roller for the insert boom.
12.2 (40) B 10 T
6
WORKING RANGES
Crane Boom
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
+HLJKWDERYHJURXQGP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P%RRP
P
5DGLXVIURPFHQWHURIURWDWLRQP
&HQWHURI
URWDWLRQ
P
7
Fixed Jib 10°
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
+HLJKWDERYHJURXQGP
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P
5DGLXVIURPFHQWHURIURWDWLRQP
&HQWHURI
URWDWLRQ
P
8
WORKING RANGES
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
+HLJKWDERYHJURXQGP
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P%RRPP-LE
P
5DGLXVIURPFHQWHURIURWDWLRQP
&HQWHURI
URWDWLRQ
P
9
SUPPLEMENTAL DATA
· Ratings according to EN13000. (Crane boom lifting)
· The total load that can be lifted is the value for weight of main
· Operating radius is the horizontal distance from centerline of
hook block, slings, and all other load handling accessories
rotation to a vertical line through the center of gravity of the
deducted from crane boom ratings shown.
load.
· Deduct weight of hook block (s), slings and all other load (Fixed jib lifting)
handling accessories from main boom ratings shown. · The total load that can be lifted is the value for weight of jib
· Ratings shown are based on freely suspended loads and make hook block, slings, and all other load handling accessories
no allowance for such factors as wind effect on lifted load, deducted from fixed jib ratings shown.
· The availability of fixed jib mounting
ground conditions, out-of-level, operating speeds or any other
condition that could be detrimental to the safe operation of this - On crane boom : Range 27.4 m to 61.0 m.
equipment.
The operator, therefore, has the responsibility to judge the <Reference Information>
existing conditions and reduce lifted loads and operating Main hoist loads
No. of Parts of Line 1 2 3 4 5
speeds accordingly.
Maximum Loads (kN) 108 216 324 431 539
· Ratings are for operation on a firm and level surface, up to 1 % Maximum Loads (t) 11.0 22.0 33.0 44.0 55.0
gradient. No. of Parts of Line 6 7 8 9 10
Maximum Loads (kN) 647 755 863 971 1,079
· At radii and boom lengths where no ratings are shown on
Maximum Loads (t) 66.0 77.0 88.0 99.0 110.0
chart, operation is not intended nor approved.
· Boom inserts and guy lines must be arranged as shown in the Auxiliary hoist loads
No. of Parts of Line 1 2
"operator's manual". Maximum Loads (kN) 108 216
· Boom hoist reeving is 10 part line. Maximum Loads (t) 11.0 22.0
· The boom should be erected over the front of the crawlers, not Operation of this equipment in excess of rated loads
or disregard of instruction voids the warranty.
laterally.
· Ratings inside of boxes are limited by strength of
materials.
· The minimum rated load is 1.5 (Ton).
10
LIFTING CAPACITIES
Counterweight: 34.6 t
Crane Boom Lifting Capacities Carbody Weight: 6.5 t
Unit: metric ton
Boom Boom
length length
Working (m) 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 39.6 42.7 (m) Working
radius (m) radius (m)
Boom Boom
length length
Working (m) 45.7 48.8 51.8 54.9 57.9 61.0 64.0 67.1 70.1 (m) Working
radius (m) radius (m)
Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.
11
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 34.6 t
Carbody Weight: 6.5 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 27.4 30.5 33.5 Boom length (m)
Jib length (m) 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 Jib length (m)
Jib length (m) 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 Jib length (m)
Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.
12
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 34.6 t
Carbody Weight: 6.5 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 45.7 48.8 51.8 Boom length (m)
Jib length (m) 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 Jib length (m)
Jib length (m) 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 Jib length (m)
32.0 5.6 5.7 5.8 5.9 6.0 5.4 5.6 5.7 5.8 5.8 5.4 5.5 5.6 5.7 5.8 32.0
34.0 5.0 5.1 5.2 5.3 5.4 4.9 5.0 5.1 5.2 5.2 4.8 4.9 5.0 5.1 5.2 34.0
36.0 4.5 4.6 4.7 4.8 4.9 4.4 4.5 4.6 4.7 4.7 4.3 4.4 4.5 4.6 4.6 36.0
38.0 4.1 4.2 4.3 4.3 4.4 3.9 4.0 4.1 4.2 4.3 3.8 3.9 4.0 4.1 4.2 38.0
40.0 3.6 3.8 3.9 3.9 4.0 3.5 3.6 3.7 3.8 3.8 3.4 3.5 3.6 3.7 3.8 40.0
42.0 3.3 3.4 3.5 3.6 3.6 3.1 3.2 3.3 3.4 3.5 3.0 3.1 3.3 3.3 3.4 42.0
44.0 2.9 3.1 3.1 3.2 3.3 2.7 2.9 3.0 3.1 3.1 2.6 2.7 2.9 3.0 3.0 44.0
46.0 2.6 2.7 2.8 2.9 3.0 2.4 2.5 2.6 2.7 2.8 2.2 2.4 2.5 2.6 2.7 46.0
48.0 2.2 2.4 2.5 2.6 2.6 2.0 2.2 2.3 2.4 2.4 1.9 2.1 2.2 2.3 2.3 48.0
50.0 2.0 2.1 2.2 2.3 2.3 1.7 1.9 2.0 2.1 2.1 1.6 1.8 1.9 2.0 2.0 50.0
52.0 1.7 1.8 1.9 2.0 2.1 1.6 1.7 1.8 1.8 1.6 1.7 1.7 52.0
54.0 1.6 1.7 1.7 1.8 1.5 1.6 54.0
56.0 1.5 1.6 56.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.
13
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 34.6 t
Carbody Weight: 6.5 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 27.4 30.5 33.5 Boom length (m)
Jib length (m) 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 Jib length (m)
24.0 8.6 6.4 5.1 4.2 3.7 8.9 6.5 5.2 4.2 3.8 9.2 6.7 5.2 4.2 3.9 24.0
26.0 6.1 4.9 4.1 3.5 8.6 6.3 5.0 4.2 3.6 8.8 6.4 5.1 4.2 3.7 26.0
28.0 5.8 4.6 3.9 3.3 8.2 6.0 4.8 4.0 3.4 8.1 6.2 4.9 4.1 3.5 28.0
30.0 4.5 3.7 3.2 5.8 4.6 3.8 3.3 7.3 6.0 4.7 3.9 3.3 30.0
32.0 4.3 3.6 3.0 4.4 3.7 3.1 5.8 4.5 3.8 3.2 32.0
34.0 3.4 2.9 3.5 3.0 4.4 3.6 3.1 34.0
36.0 2.8 3.4 2.9 3.5 3.0 36.0
38.0 2.7 2.8 3.4 2.9 38.0
40.0 2.8 40.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Jib length (m) 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 Jib length (m)
28.0 8.0 6.3 5.0 4.2 3.6 7.9 6.5 5.1 4.2 3.6 7.8 6.6 5.2 4.2 3.7 28.0
30.0 7.2 6.1 4.8 4.0 3.4 7.1 6.3 4.9 4.1 3.5 7.0 6.4 5.0 4.2 3.6 30.0
32.0 6.5 5.9 4.7 3.8 3.3 6.4 6.1 4.8 3.9 3.3 6.3 6.2 4.9 4.0 3.4 32.0
34.0 5.7 4.5 3.7 3.1 5.9 4.6 3.8 3.2 5.7 5.9 4.7 3.9 3.3 34.0
36.0 4.4 3.6 3.0 5.4 4.5 3.7 3.1 5.2 5.3 4.6 3.7 3.2 36.0
38.0 4.2 3.5 2.9 4.3 3.5 3.0 4.9 4.4 3.6 3.1 38.0
40.0 3.4 2.8 3.4 2.9 4.3 3.5 3.0 40.0
42.0 2.7 3.4 2.8 3.4 2.9 42.0
44.0 2.7 2.7 3.3 2.8 44.0
46.0 2.7 46.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.
14
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 34.6 t
Carbody Weight: 6.5 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 45.7 48.8 51.8 Boom length (m)
Jib length (m) 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 Jib length (m)
32.0 6.1 6.3 5.0 4.1 3.5 6.1 6.3 5.0 4.1 3.5 6.0 6.2 5.1 4.2 3.6 32.0
34.0 5.5 5.7 4.8 3.9 3.3 5.5 5.7 4.9 4.0 3.4 5.4 5.6 5.0 4.1 3.4 34.0
36.0 5.0 5.2 4.7 3.8 3.2 4.9 5.1 4.7 3.9 3.3 4.8 5.0 4.8 3.9 3.3 36.0
38.0 4.6 4.7 4.5 3.7 3.1 4.5 4.6 4.6 3.8 3.2 4.4 4.5 4.7 3.8 3.2 38.0
40.0 4.4 3.6 3.0 4.2 4.4 3.7 3.1 3.9 4.1 4.2 3.7 3.1 40.0
42.0 4.0 3.5 2.9 3.8 4.0 3.6 3.0 3.7 3.9 3.6 3.0 42.0
44.0 3.4 2.8 3.6 3.5 2.9 3.4 3.5 3.5 2.9 44.0
46.0 2.8 3.4 2.8 3.2 3.3 2.9 46.0
48.0 2.7 3.1 2.7 3.0 2.8 48.0
50.0 2.6 2.7 2.7 2.7 50.0
52.0 2.5 52.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Jib length (m) 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 9.1 12.2 15.2 18.3 21.3 Jib length (m)
Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.
15
SUPPLEMENTAL DATA FOR CLAMSHELL RATING CHART
· Operating radius is the horizontal distance from centerline of (Clamshell bucket lifting)
rotation to a vertical line through the center of gravity of the
· The total load that can be lifted is the value for weight of
load.
bucket, slings, and all other load handling accessories
· Deduct weight of bucket, slings and all other load handling deducted from main boom ratings shown.
accessories from main boom ratings shown.
· The weight of bucket and materials must not exceed rated
· Ratings shown are based on freely suspended loads and make load.
no allowance for such factors as wind effect on lifted load,
· Optimum bucket should be required according to material.
ground conditions, out-of-level, operating speeds or any other
condition that could be detrimental to the safe operation of · Bucket capacity (m3) x specified gravity of material (ton/m3) +
this equipment. The operator, therefore, has the responsibility bucket weight (ton) = rated load.
to judge the existing conditions and reduce lifted loads and · Bucket weight must also be decreased according to operating
operating speeds accordingly. cycle and bucket lowering height.
· Rated loads do not exceed 66% of minimum tipping loads. · Rated loads are determined by stability and boom strength.
· Ratings are for operation on a firm and level surface, up to 1% During simultaneous operations of boom and swing, rapid
gradient. acceleration or deceleration must be avoided.
· At radii and boom lengths where no ratings are shown on · Do not attempt to cast the bucket while swinging or diagonal
chart, operation is not intended nor approved. draw-cutting.
· Crawler frames must be fully extended for all crane operations. No.2 No.3
No.1
Counterweights
Carbody weights
16
LIFTING CAPACITIES
Counterweight: 23.1 t
Clamshell Rating Charts Without Carbody Weight
Crawler Fully Extended
Crane Boom Capacities Unit: metric ton
Boom Boom
length length
Load (m) 15.2 18.3 21.3 24.4 (m) Load
radius (m) radius (m)
Note:
Please refer rated chart in operator’s cabin.
17
SUPPLEMENTAL DATA FOR REDUCED WEIGHTS RATING CHART
· Ratings according to EN13000. (Crane boom lifting)
· Operating radius is the horizontal distance from centerline of · The total load that can be lifted is the value for weight of hook
rotation to a vertical line through the center of gravity of the block, slings, and all other load handling accessories deducted
load. from main boom ratings shown.
· Deduct weight of hook block (s), slings and all other load
Boom lenght
handling accessories from main boom ratings shown. Counterweight Carbody weight
Without aux. With aux.
· Ratings shown are based on freely suspended loads and make 23.1 ton Without 15.2 m ∼ 57.9 m 15.2 m ∼ 54.9 m
18
LIFTING CAPACITIES
Counterweight: 23.1 t
Reduced Weights Rating Charts Without Carbody Weight
Crawler Fully Extended
Crane Boom Lifting Capacities Unit: metric ton
Boom Boom
length length
Working (m) 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 39.6 42.7 (m) Working
radius (m) radius (m)
Boom Boom
length length
Working (m) 45.7 48.8 51.8 54.9 57.9 (m) Working
radius (m) radius (m)
8.0 8.2m/26.3 8.7m/24.0 8.0
9.0 23.9 23.2 9.1m/22.2 9.6m/20.3 9.0
10.0 21.3 20.8 20.1 19.5 18.9 10.0
12.0 17.4 17.0 16.5 16.0 15.5 12.0
14.0 14.1 14.0 13.8 13.4 13.0 14.0
16.0 11.6 11.6 11.4 11.4 11.0 16.0
18.0 9.8 9.7 9.6 9.6 9.4 18.0
20.0 8.3 8.3 8.1 8.1 8.0 20.0
22.0 7.2 7.1 7.0 7.0 6.8 22.0
24.0 6.3 6.2 6.1 6.0 5.9 24.0
26.0 5.5 5.4 5.3 5.3 5.1 26.0
28.0 4.9 4.8 4.6 4.6 4.5 28.0
30.0 4.3 4.2 4.1 4.0 3.8 30.0
32.0 3.8 3.7 3.5 3.5 3.3 32.0
34.0 3.3 3.3 3.1 3.0 2.8 34.0
36.0 2.9 2.9 2.7 2.6 2.4 36.0
38.0 2.6 2.5 2.3 2.2 2.1 38.0
40.0 2.2 2.2 2.0 1.9 1.7 40.0
42.0 40.8m/2.1 1.9 1.7 1.6 42.0
44.0 43.5m/1.6 44.0
46.0 46.0
48.0 48.0
50.0 50.0
52.0 52.0
54.0 54.0
56.0 56.0
58.0 58.0
Reeves 3 3 3 2 2 Reeves
Note:
Ratings according to EN13000.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.
19
SUPPLEMENTAL DATA FOR BARGE RATING CHART
· Operating radius is the horizontal distance from centerline of · The boom should be erected over the front of the crawlers, not
rotation to a vertical line through the center of gravity of the laterally.
load.
· Ratings inside of boxes are limited by strength of
· Deduct weight of hook block (s), slings and all other load materials.
handling accessories from main boom ratings shown.
·The minimum rated load is 1.5 (ton).
· Condition of barge stability this rating chart were determined
·Crawler frames must be fully extended for all crane operations.
under the condition below. The stability of barge shall meet
below condition. During operation the machinery static · The machinery should be fastened to the deck of the barge to
inclination against horizontal level. prevent tip over and sliding.
(A) Both sides (right & left) of machine ·Towing area
Maximum inclination shall be within 1.5 degrees Towing area shall be within coastal area and quiet wave
(B) Front & backward of macine condition. Offshore and open sea is not considered for this
Maximum inclination shall be within 3.0 degrees machinery. Depend on the height of wave, counterweight shall
Direction of Right and Left be reduced during towing.
for Machinery
· The total load that can be lifted is the value for weight of hook
block, slings, and all other load handling accessories deducted
from main boom ratings shown.
<Reference Information>
Main hoist loads
No. of Parts of Line 1 2 3 4 5
Maximum Loads (kN) 108 216 324 431 539
Direction of Front and Rear
for Machinery Maximum Loads (t) 11.0 22.0 33.0 44.0 55.0
20
LIFTING CAPACITIES
Counterweight: 34.6 t
Barge Raiting Chart Carbody Weight: 6.5 t
Crawler Fully Extended
Crane Boom Lifting Capacities Unit: metric tons
Boom Boom
length length
Load (m) 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 (m) Load
radius (m) radius (m)
Note:
Ratings according to japanese construction codes for mobile cranes and japanese safety ordinance on cranes, etc.
Ratings shown in are determined by the strength of the boom or other structual components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator’s cabin.
21
TRANSPORTATION PLAN
Weight
Name Dimension
(kg)
Base Machine
15,780
· Boom base
· Gantry
3,550
· Crawler
3,500
57,410
· Wire rope
(Front / rear /
boom hoist) 3,500
Base Machine
9,420
· Gantry
· Crawler
3,550
3,500
· Wire rope
54,090
(Front / rear /
boom hoist)
3,500
Base Machine
· Boom base 15,780 2,990*1
· Gantry
· Wire rope
3,100
3,050
33,550
(Front / rear /
boom hoist)
· Without crawler
3,500 2,990
· Without side steps
Base Machine
· Gantry 8,650 2,990*1
· Wire rope
3,100
3,100
(Front / rear /
3,050
30,230
boom hoist)
· Without crawler
· Without side steps 3,500 2,990
Crawler
6,770 900
1,130
11,930
1,100
22
23
24
PARTS AND ATTACHMENTS
15,780
Jib Tip
Weight: 280 kg
3,500
800
800 5,000
Jib Base
3,550
Weight: 200 kg
800
3,500 4,810 800
800
1,130
800
970
970
740
840
3,620 2,010
230
230
620
720
1,480 1,480
Counterweight No.1 Counterweight No.3, No.5 (R) Counterweight No.2, No.4 (L)
Weight: 11,600 kg Weight: 5,750 kg Weight: 5,750 kg
1,170
1,170
4,430
830
Carbody Weight (With float) Carbody Weight (Without float) Self Removal Unit
Weight: 3,320 kg / 1 piece Weight: 3,250 kg / 1 piece Weight: 870 kg
1,590 980
820
1,260
2,080
1,900
2,080
660
660
25
Boom Tip Gantry
Weight: 1,525 kg Weight: 1,320 kg
1,680 8,320
1,250
1,650
1,690
5,360
Boom Base
760
Weight: 2,235 kg
7,790 1,730
1,780 310
3.0 m
Boom Insert
Weight: 380 kg
800
3,160 1,680
1,690
Lower Spreader
Weight: 200 kg
6.1 m
Boom Insert 225
Weight: 655 kg
6,210 1,680
700
1,690
910
12.2 m
Boom Insert
Weight: 1,195 kg
Ball Hook 35 t Hook
12,310 1,680 Weight: 450 kg Weight: 700 kg
1,140
1,210
1,580
12.2 m
Boom Insert (with Lug)
Weight: 1,220 kg
1,690
1,430
1,930
26
Note: This catalog may contain photographs of machines with specifications, attachments and optional equipment not certified for operation in your
country. Please consult KOBELCO for those items you may require. Due to our policy of continual product improvements all designs and
specifications are subject to change without advance notice.
Copyright by KOBELCO CRANES CO., LTD. No part of this catalog may be reproduced in any manner without notice.
Inquiries To :
17-1, Higashigotanda 2-chome, Shinagawa-ku,Tokyo 141-8626 JAPAN
Tel: +81-3-5789-2130 Fax: +81-3-5789-3372
URL: http://www.kobelco-cranes.com/
KOBELCO is the corporate mark used by Kobe Steel on a variety of products Bulletin No. CKS1100-SPEC-NR2 131201F Printed in Japan
and in the names of a number of Kobe Steel Group companies.