Professional Documents
Culture Documents
DESCRIPTION
Bostik Anchor Grout is polyester resin based grout material APPLICATION PROCEDURE
suitably blended with a hardening compound and fillers and Hole Preparation and formation : Optimum performance of
supplied as a pre measured, two part, resin grout. After Bostik Anchor Grout requires rough sided, dust free holes. Uses
hardening, the grout has high mechanical properties. Bostik of rotary percussive drills with air or water flushing is
Anchor Grout is used where the difference between the hole recommended. Diamond drilled holes should be under - reamed
diameter and bar diameter is = 25 mm. unless necessary safety factors are incorporated.
Cast holes should preferably be inverse dovetail configuration. If
RECOMMENDED USES parallel sides holes are cast they should be rough to provide
Bostik Anchor Grout is used for high strength corrosion adequate keying.
resistant anchoring of bolts and bars from 12 - 25 mm diameter Bar preparation : All bars should preferably be degreased and all
into concrete, rock, masonry or brickwork where high speed of flaky rust removed.
installation and early application of load is required. Mixing : A complete pack of resin and catalyzed filler should be
Permanent installation of reinforcement starter bars, mixed in one operation. Mixing may be carried out mechanically.
foundation bolts, base plates, barriers and safety fences, When a smooth, even consistency is achieved the grout is ready
railway tracks, tie-back anchors, reinforcement dowelling for use and should be placed well within the get time of the grout.
abutments, ground anchors for towers, cranes, dock sills.
PACKAGING
FEATURES & BENEFITS 1 Kg
• Rapid strength gain. • Non expansive.
• Vibration resistant. • Can be placed under water. STORAGE & SHELF LIFE
• Corrosion resistant. 6 months in original packing.