Professional Documents
Culture Documents
Contents iii
Einführung in Pro Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Anschließen von Kopfhörern oder Lautsprechern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Wiedergabe der Demo-Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Erstellen einer neuen Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Aufnehmen von Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Zeitmessung in Minuten und Sekunden oder Takten und Schlägen . . . . . . . . . . . . . . . . . . . 85
Importieren von Audiodateien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Bearbeiten von Audiomaterial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
MIDI-Sequencing mit einem Virtual Instruments-Plug-In . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Mischen und Plug-In-Verarbeitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Exportieren Ihres Mix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Weitere Informationen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Contents iv
Pro Tools キϸ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
䔋ᣒ㕠ᱧᝃយฝக . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
᧚ᩫ⑁ጒ⼸ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
݈ᐧጒ⼸ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
䴠䶾ᒂ ݣ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
В “ ܳহ ” ᝃ “ ᄼ㞯হၽ ” ≸䛼ᬣ䬡 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
ᄩڒ䴠䶾 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
㑃䒾䴠䶾 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Ҭ⩕㮇᠌ͽகУ㑃䒾 MIDI Ꮌ݄ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
⌤䴠হУั⤳ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
ᄩ⌤ܧ䴠 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
γ㼐ᰡ็ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Contents v
Introduction to Pro Tools
Headphone level
Master volume
level
Toolbar
Tracks
Edit window
Connecting a mic to Mic/Line Input 1 on the rear panel of an Mbox with an XLR cable
Main Counter
Grid mode
Timebase
Rulers
Timeline
Pro Tools Timeline and Main Counter (with the Main Time Scale set to Minutes and Seconds)
Changing the Main Time Scale Pro Tools creates a new Auxiliary Input track with
the Click II plug-in on the first track insert. When
To set the Main Time Scale, do one of the following:
you start playback or recording, the click provides
Click a Main Counter selector (located at the top a countoff and continues according to the meter and
of the Edit or Transport window (when it is set to tempo map in the Pro Tools Timeline.
display Counters) and select a Time Scale.
2 Select View > Transport > MIDI Controls to view
the MIDI controls in the Transport Window.
3 In the Transport, ensure that the Metronome and
Count Off buttons are selected.
4 Ensure that the Conductor button is enabled if
Main Counter selector (in the Edit window) you want the click to follow the session tempo
If a Timebase ruler is displayed, click its name (on the Timeline). Disable the Conductor button
so it becomes highlighted. if you want to adjust the tempo manually.
5 Press the Spacebar or click the Play button in the
Setting the Main Time Scale to the timebase
Transport to start playback and hear the click.
currently displayed in the Sub Counter
switches the two Time Scales, setting the Sub
Time Scale to the previous timebase of the Tempo
Main Time Scale.
Count Off button
Metronome button
Setting the Main Time Scale to Bars|Beats
Conductor button
Click/Countoff dialog
3 Click OK.
Tempo ruler
1 Ensure that the MIDI controls are shown in the
Transport by selecting View > Transport > MIDI
Controls.
Tempo
Conductor button
Importing Audio
Many music production workflows include using
audio loops and audio from sample libraries. For
example, you can use drum loops instead of a click
track for recording. You can even combine and
arrange audio loops and “one-shot” samples from a
variety of sources to create a whole new piece of
music.
Workspace
song start
Edit Tools
What is MIDI?
MIDI (Musical Instrument Digital Interface) data is
not audio. MIDI does not generate sound. MIDI is
a way for MIDI-equipped devices—like
synthesizers, samplers, controllers, keyboards, and
sequencers—to communicate control data, to
“talk” to one another. MIDI effectively tells sound
generating devices (like hardware synthesizers or
samplers, or software virtual instruments) what to
play.
You can also use Instrument tracks with external MIDI devices.
Insert
selector
For more information about the Xpand!2 plug-in, see the AIR Creative Collection Plug-Ins Guide.
At the top of the plug-in window, click the Librarian menu (<factory default>) and select a preset from
any of the sub-menus. With Xpand!2, presets are grouped in sub-menus by category.
MIDI notes must be selected before they can be MIDI notes can be transposed by dragging them up
edited. or down with the Pencil tool or any Grabber tool. If
several notes are selected before dragging, each
To select MIDI notes: note is transposed.
1 Set the MIDI or Instrument track to Notes view.
To transpose a MIDI note:
2 Do one of the following:
1 Set the MIDI or Instrument track to Notes view.
With the Pencil tool or any Grabber tool, Shift-
2 Select the Pencil tool or any Grabber tool.
click each note.
3 While holding Shift, drag the note up or down.
With any Grabber tool, move the cursor to where
there are no notes (the Marquee appears) and
draw a rectangle around the group of notes you
want to edit.
When using a Grabber tool, if any portion of the While dragging, each new note sounds and the
rectangle touches a note (either its start or end Cursor Location Value indicator (in the Edit
point), the note is included in the selection. window) indicates the number of semitones and
direction (+/–) for the transposition.
With the Selector tool, drag across a range of
notes. Hold Control (Mac) or Start (Windows) and
press Plus (+) on the numeric keypad to
transpose the selected MIDI notes up by one
semitone, or press Minus (–) on the numeric
keypad to transpose the selected MIDI notes
down by one semitone.
Like clips, MIDI notes can be dragged left or right Like clips, start and end points for MIDI notes can
with the Pencil tool or any Grabber tool to change be adjusted with the Trim tool. If several notes are
their start point on the Pro Tools Timeline. If selected when performing the trim, each note is
several notes are selected before dragging, they are changed.
all moved together.
To change the start or end points for a group of
To move a MIDI note: MIDI notes:
1 Set the MIDI or Instrument track to Notes view. 1 Set the MIDI or Instrument track to Notes view.
2 With the Pencil tool or any Grabber tool, drag 2 Select the notes you want to trim.
the note left or right (press Shift while dragging 3 Do one of the following:
to preserve the note’s pitch).
• Select the Trim tool.
As the note is dragged, the Cursor Location Value • Use the Pencil tool.
indicator (in the Edit window) displays the new
start point. 4 Move the cursor near the beginning of any of the
highlighted notes, so the Trim tool appears.
If the Edit mode is set to Grid, the dragged note Drag right to shorten the notes, or drag left to
snaps to the nearest Grid boundary. If the Edit lengthen them.
mode is set to Spot, the Spot dialog opens.
When a MIDI or Instrument track is set to Velocity In addition to deleting selected notes with the Clear
view, or when the Velocity lane is revealed under a command in the Edit menu, individual notes can
track, each note’s attack velocity is represented also be deleted with the Pencil tool.
with a velocity stalk. The taller the velocity stalk,
the higher the velocity value (0–127). To delete a group of MIDI notes with the Clear
command:
To edit MIDI velocity in the Edit window: 1 Select the notes to be deleted.
1 Do one of the following: 2 Do one of the following:
• Set the MIDI or Instrument track to Velocity • Choose Edit > Clear to delete the selected notes.
view. The track’s underlying controller data remains
• Reveal the Controller lane for the MIDI or In- intact.
strument track and show Velocity. • With any Edit tool, Right-click any selected note
and choose Clear.
• Press the Delete (Mac) or the Backspace (Win-
dows) key.
3 On the Auxiliary Input track you just added, click the Track Input selector and select Bus > Bus 1–2.
Track Input
selector
Selecting Bus 1–2 from the Input selector on an Auxiliary Input track
Send A
selector
5 Repeat the previous step for each additional track that you want to send to the Auxiliary Input track for
reverb processing.
Bussing sends from audio tracks to an Auxiliary Input track for reverb processing with D-Verb
7 You can use individual Send Output windows to adjust the Send level from source tracks; or, you can set
the Sends view to display the send controls for a particular send (for example, select View > Sends A–E
> Send A).
8 Press the Spacebar and slowly raise the small fader in the Send Output window or in the Sends track
controls. This adjusts how much of the source track you are sending to the Auxiliary Input track for
Reverb processing.
9 Keep playing and listening, adjusting the individual track send levels, and checking out different plug-in
settings to find just the right effect for your mix.
You can write automation for all write-enabled 7 Switch the Automation mode back to Read to
controls by moving those controls during playback. play back the automation you just wrote.
To write automation on tracks: After the first automation pass, you can write
additional automation to the track without
1 Choose Window > Automation.
completely erasing the previous pass by
2 Make sure the automation type is write-enabled. choosing Touch mode or Latch mode. These
modes add new automation only when you
Track actually move a control.
Automation
Mode Manually Editing Automation
selector
Automation
For all tracks in a session, Pro Tools provides
window several ways to edit automation data. You can edit
automation data graphically by adjusting
breakpoints in any automation playlist. You can
also cut, copy, and paste automation data in the
same manner as audio and MIDI data.
Automation breakpoint
Automation breakpoint value Using the Grabber tool to create a new breakpoint
Track View
selector Using the Pencil tool to delete a breakpoint
Automation Using the Trim Tools
Type selector
The Trim tools let you adjust all selected
Volume breakpoints up or down by dragging anywhere
automation
within that selection.
track view
Automation
lanes
Selector tool
Timeline selection
Session audio
selected and ready
to Bounce to Disk
2 Choose File > Bounce to > Disk. 3 In the Bounce Options dialog, do the following:
• Select the as the Bounce Source (this will be the
main channel path for your mix, such as main
(Stereo) –> Analog 1–2).
• Select the File Type (for example, WAV).
• Select Interleaved for the Format.
• If you will be burning the bounced audio file to
CD, select 16 Bit for the Bit Depth.
• If you will be burning the bounced audio file to
CD, select 44.1 kHz for the Sample Rate.
• For faster than real-time Bounce, select the
Offline option.
Burning Your Mix to CD You can also use the online Pro Tools Help
(Help > Pro Tools Help) to search for specific
After the bounce is completed, you will have an topics.
audio file that you can burn to an audio CD using
CD burning software (such as iTunes or Roxio
Toast) that can be played on standard CD players.
Listening to a reference CD in an environment
other than your studio is a time-tested way to hear
how your mix translates to other systems and
listening environments.
Volume du casque
Barre
d'outils
Pistes
Fenêtre d'édition
Connexion d'un micro avec un câble XLR à l'entrée micro/ligne 1 du panneau arrière d'une Mbox
Sélecteur de
chemin
Création d'une nouvelle piste audio mono d'entrée
audio
Si vous souhaitez enregistrer les deux entrées
simultanément, créez une piste stéréo ou deux pistes
mono selon le type de source à enregistrer et le
matériel utilisé :
Compteur principal
Mode Grid
Règles de
base de
temps
Timeline
Timeline et compteur principal de Pro Tools (l'échelle temporelle principale est définie sur minutes et secondes)
L'échelle temporelle principale de Pro Tools pour la timeline de la session est définie par défaut sur
Min:Secs (minutes et secondes). Vous pouvez également l'afficher en Mesures|Temps si vous souhaitez
enregistrer avec une piste de clic, à une signature rythmique et un tempo spécifiques. Une échelle temporelle
principale basée sur les mesures et temps est également utile pour la création, l'édition et la manipulation de
données audio et MIDI sur une grille graduée en mesures et temps.
Définition de la métrique de la
Bouton du chef d'orchestre
session
Pour configurer les paramètres du clic :
Veillez à définir la métrique de la session afin qu'elle
1 Sélectionnez Configuration > Clic/Décompte. corresponde à celle de votre musique. Si la métrique
d'une session ne correspond pas à celle de la musique
2 Choisissez l'une des options suivantes :
que vous enregistrez, les temps forts de la piste de
• En cours de lecture et d'enregistrement : le clic clic ne tomberont pas sur ceux de votre musique.
est audible pendant la lecture et l'enregistrement Par conséquent, les données enregistrées risquent
• En cours d'enregistrement uniquement : le clic de ne pas être alignées sur les intervalles en mesures
n'est audible que pendant l'enregistrement, et non et temps de la grille de la fenêtre d'édition.
pendant la lecture
Pour définir la métrique d'une session :
• En cours de décompte uniquement : le clic n'est
audible que pendant le décompte précédant le 1 Double-cliquez sur la métrique actuelle affichée
début de la lecture ou de l'enregistrement dans la zone Meter de la fenêtre de transport.
Définition du tempo de la
session Fenêtre Changement de tempo
Dans Pro Tools, les nouvelles sessions sont créées
avec un tempo par défaut de 120 BPM. Si vous Vous pouvez saisir un tempo spécifique ou
souhaitez enregistrer à un tempo différent de 120 BMP, utiliser la touche T pour battre la mesure.
ajustez le tempo en conséquence.
3 Définissez la valeur du champ Emplacement sur
Pour modifier le tempo de la session : 1|1|000 afin que l'événement de tempo inséré
remplace celui créé par défaut.
1 Effectuez l'une des opérations suivantes :
• Double-cliquez sur le marqueur de début de 4 Dans le menu déroulant Métrique, sélectionnez
morceau de la fenêtre d'édition. une valeur de note pour les temps. Pour une mesure
en 6/8 par exemple, sélectionnez une noire pointée.
• Cliquez sur le bouton Ajouter un changement de
tempo (+), situé au début de la règle de tempo. 5 Cliquez sur OK.
Espace de travail
Outil Smart
Copier-coller de clips
L'exemple suivant montre comment copier et coller
un clip audio d'une piste vers d'autres endroits de la
timeline ou d'autres pistes de la session. Une boucle
audio rythmique importée sera utilisée.
Vous pouvez également les utiliser avec des périphériques MIDI externes.
Sélecteur
d'insert
Pour plus d'informations sur le plug-in Xpand!2, reportez-vous au Guide des plug-ins AIR Creative Collection.
En haut de la fenêtre de plug-in, cliquez sur le menu de bibliothèque (<valeur d'usine>) et sélectionnez
un préréglage dans l'un des sous-menus. Les presets du plug-in Xpand!2 sont classés par catégorie dans
des sous-menus.
Enregistrement MIDI avec un 9 Cliquez une nouvelle fois sur le bouton Activer
contrôleur externe l'enregistrement de la piste pour la sortir du mode
d'activation pour l'enregistrement et écouter ce que
Vous pouvez enregistrer dans Pro Tools des données vous venez d'enregistrer.
MIDI provenant d'un contrôleur MIDI.
Pour enregistrer du MIDI sur une piste d'instrument : Programmation d'une séquence
MIDI avec le Crayon
1 Assurez-vous que votre contrôleur MIDI est
connecté à une interface MIDI avec des câbles Vous pouvez programmer une séquence MIDI dans
MIDI ou directement à votre ordinateur via un Pro Tools en utilisant l'outil Crayon.
câble USB.
Lorsque vous insérez des notes MIDI ou
2 Créez une piste d'instrument stéréo et insérez le d'autres données MIDI avec le Crayon, des
plug-in Xpand!2 (reportez-vous à la section limites de clip MIDI sont créées sur les barres
« Création d'une piste d'instrument avec un de mesure les plus proches.
plug-in d'instrument » à la page 60).
3 Sélectionnez un préréglage de basse (aussi
appelé « patch »).
4 Sélectionnez Options > MIDI Thru. (Vérifiez si
l'option MIDI Thru est cochée et sélectionnez-la
si elle ne l'est pas.)
Lorsque le mode Grid est activé, le point de Lorsque vous utilisez un outil de saisie, si une partie
fin de la note MIDI est aligné par défaut sur du rectangle touche une note (que ce soit son point
la limite de grille la plus proche. Pour de début ou de fin), celle-ci est incluse dans la
désactiver momentanément l'alignement sur sélection.
la grille, maintenez la touche Commande
Faites glisser le sélecteur sur une plage de notes.
(Mac) ou Ctrl (Windows) enfoncée pendant
que vous faites glisser le Crayon.
Vous devez sélectionner les notes MIDI avant de Transposition des notes
pouvoir les éditer.
Vous pouvez transposer les notes MIDI en les faisant
Pour sélectionner des notes MIDI : glisser avec un outil de saisie ou le Crayon vers le
haut ou le bas. Si plusieurs notes sont sélectionnées
1 Affichez la piste MIDI ou d'instrument en vue
avant de faire glisser l'outil de saisie, elles sont toutes
Notes.
transposées.
2 Effectuez l'une des opérations suivantes :
Pour ajuster la position des points de début ou de Pour modifier la vélocité MIDI dans la fenêtre
fin d'un groupe de notes MIDI : d'édition :
1 Affichez la piste MIDI ou d'instrument en vue Notes. 1 Effectuez l'une des opérations suivantes :
2 Sélectionnez les notes sur lesquelles vous souhaitez • Affichez la piste MIDI ou d'instrument en vue
réaliser l'opération de trim. Velocity.
3 Effectuez l'une des opérations suivantes : • Affichez la ligne de contrôleur de la piste MIDI
ou d'instrument et affichez les vélocités.
• Sélectionnez l'outil de trim.
• Utilisez le Crayon.
4 Déplacez le curseur près du début de l'une des
notes sélectionnées ; le pointeur de l'outil de trim
apparaît. Faites-le glisser vers la droite pour
raccourcir les notes ou vers la gauche pour les
rallonger.
Affichage de la ligne de vélocité
3 La fenêtre du plug-in Dyn III s'ouvre. Utilisez La configuration « départ-retour » est l'une des plus
les presets du plug-in comme point de départ et efficaces afin d'incorporer une reverb à un mix. Dans
découvrez comment chaque paramètre de Pro Tools, les départs des pistes permettent de router
l'égaliseur agit sur le son. très facilement l'audio provenant de plusieurs pistes
vers un même effet de reverb. Les pistes source
sembleront ainsi toutes avoir été enregistrées dans
la même pièce.
3 Cliquez sur le sélecteur d'entrée de piste de la piste d'entrée auxiliaire que vous venez de créer et sélectionnez
Bus > Bus 1–2.
Sélecteur d'entrée
de piste
Sélection du Bus 1-2 à partir du sélecteur d'entrée d'une piste d'entrée auxiliaire
Sélecteur du
départ A
5 Répétez l'étape précédente pour chaque piste supplémentaire que vous souhaitez envoyer vers la piste
d'entrée auxiliaire pour le traitement de reverb.
Routing des départs de pistes audio vers une piste d'entrée auxiliaire pour leur traitement dans la reverb D-Verb
7 Utilisez les fenêtres de départs individuelles pour ajuster le niveau du départ des pistes source. Vous
pouvez également configurer la vue Départs étendus afin que les commandes d'un départ particulier soient
affichées (sélectionnez par exemple Afficher > Départs étendus > Départ A).
8 Appuyez sur la barre d'espace et montez doucement le petit fader de la fenêtre de sortie du départ ou des
commandes de piste du départ. Vous ajustez ainsi la quantité de signal source envoyée sur la piste
d'entrée auxiliaire pour le traitement de reverb.
9 Continuez à écouter votre mix et ajustez les niveaux des départs de piste individuels et expérimentez
différents paramétrages du plug-in pour obtenir l'effet souhaité.
Pour écrire une automation sur des pistes : Après la première passe d'automation, vous
pouvez écrire d'autres mouvements d'automation
1 Sélectionnez Fenêtre > Automation.
sur la piste sans effacer complètement le
2 Assurez-vous que l'écriture est activée pour ce passage précédent, en mode Touch ou Latch.
type d'automation. Ces modes ajoutent des données d'automation
uniquement lorsque vous déplacez une
Sélecteur de commande.
mode
d'automation Édition manuelle d'une automation
de piste
Pro Tools propose plusieurs méthodes d'édition des
données d'automation des pistes d'une session. Vous
Fenêtre
Automation pouvez modifier les données d'automation
graphiquement, en ajustant les points d'une playlist
d'automation. Vous pouvez également couper, copier
et coller les données d'automation comme s'il s'agissait
de données audio ou MIDI.
Point d'automation
Fenêtre d'automation, automation de volume activée
Variation de la valeur d'un point d'automation Création d'un point d'automation avec la Main
Sélecteur de
vue de piste Suppression d'un point d'automation avec le Crayon
Sélecteur de Utilisation des outils de trim
type
d'automation Les outils de trim permettent de déplacer les points
Vue de piste d'automation sélectionnés vers le haut ou le bas en
d'automation les faisant glisser à partir d'un point quelconque de
du volume la sélection.
Lignes
d'automation
Sélecteur
Sélection de timeline
Sélection audio de la
session prête pour le
bounce sur disque
2 Sélectionnez Ficher > Bounce sur > Disque. 3 Dans la boîte de dialogue des options de bounce,
effectuez les opérations suivantes :
• Sélectionnez une source dans le menu Source du
bounce (chemin principal de sortie des canaux
de votre mix, tel que main (Stereo) –> Analog
1–2).
• Sélectionnez un type de fichier dans le menu
Type de fichier (WAV par exemple).
• Sélectionnez Entrelacé dans le menu Format.
Vous obtiendrez ainsi un fichier stéréo.
• Si vous souhaitez graver sur CD le fichier résultant,
sélectionnez 16 Bit dans le menu Résolution.
• Si vous souhaitez graver sur CD le fichier résultant,
sélectionnez 44,1 kHz dans le menu Fréquence
d'échantillonnage.
Boîte de dialogue Bounce • Pour un bounce plus rapide qu'en temps réel,
sélectionnez l'option Offline.
Introduction à Pro Tools 75
4 Cliquez sur Bounce. Si aucune sélection de timeline
n'est active, l'opération de bounce s'appliquera à Pour en savoir plus
la durée totale de la session, du début à la fin. Nous espérons que cette rapide présentation du logiciel
5 Dans la boîte de dialogue Enregistrer, entrez le Pro Tools vous a donné envie de vous mettre à l'œuvre.
nom du fichier audio qui sera généré et Pour en savoir plus sur les fonctionnalités abordées
sélectionnez son emplacement d'enregistrement. dans ce document, reportez-vous au Guide de
référence Pro Tools (Aide > Guide de référence de
6 Cliquez sur Enregistrer. Pro Tools). Vous accéderez à des informations
détaillées sur tous les logiciels et systèmes
Pro Tools lance l'opération de bounce sur disque.
Pro Tools. Le Guide de référence Pro Tools fournit
Si l'option Offline n'est pas activée, le processus de des explications exhaustives sur l'ensemble des
bounce de Pro Tools est réalisé en temps réel et aspects et fonctionnalités de Pro Tools, classés par
vous pouvez entendre la lecture audio de votre mix tâche de production audio et musique (comme
pendant l'opération. Cependant, il est impossible de Enregistrement, Édition et Mixage).
modifier les paramètres d'un mix Pro Tools
Vous pouvez également utiliser l'aide en ligne de
pendant cette procédure.
Pro Tools (Aide > Aide de Pro Tools) pour
rechercher des informations spécifiques.
Gravure de votre mix sur CD
Lorsque l'opération de bounce est terminée, vous
obtenez un fichier audio que vous pouvez graver
sur un CD audio à l'aide d'un logiciel de gravure tel
qu'iTunes ou Roxio Toast. Ce CD pourra être lu par
n'importe quel lecteur CD standard. Écouter un CD
de référence dans un autre environnement que votre
studio est un excellent moyen de se rendre compte
si votre mix sonne correctement sur d'autres
systèmes et environnements d'écoute.
Kopfhörerpegel
Master-Lautstärkepegel
6,3-mm-Kopfhörerbuchse
Bedienelemente und Anschlüsse auf der Mbox-Vorderseite
Symbol-
leiste
Spuren
Edit-Fenster
Quellen-Selektor für
Eingang 1 (Front-
/Rear-Taste) Eingang 1
Mic/Line-Eingang
Anschließen eines Mikrofons mit einem XLR-Kabel an den Mic/Line-Eingang 1 auf der Rückseite einer Mbox
• Wenn die Pegelanzeige rot wird, ist dieVerstärkung Zurück zu Null Abspielen Aufnahme
zu hoch. Verringern Sie den Eingangs-Gain.
• Wird kaum ein grüner Pegel angezeigt, ist die
Verstärkung zu gering. Erhöhen Sie den
Eingangs-Gain.
Grid-
Modus
(Raster-
Modus)
Timebase-
Leiste
Timeline
Pro Tools-Timeline und -Hauptzähler (mit der Haupt-Zeitskala in Minuten und Sekunden)
In dieser Pro Tools-Session ist die Haupt-Zeitskala Wenn eine Zeitbasis-Leiste angezeigt wird, klicken
für die Timeline standardmäßig auf Min:Sek Sie auf ihren Namen, sodass sie hervorgehoben
(Minuten und Sekunden) eingestellt. Sie können die wird.
Haupt-Zeitskala jedoch zu Takte|Schläge ändern,
wenn Sie mit einer Metronomspur in einer Wenn Sie die Haupt-Zeitskala auf die derzeit
festgelegten Taktart und einem festgelegten Tempo im Nebenzähler angezeigte Zeitbasis einstellen,
aufnehmen möchten. Die Haupt-Zeitskala auf Takte werden die zwei Zeitskalen vertauscht, d. h.,
und Schläge zu setzen ist auch dann hilfreich, wenn die Sub-Zeitskala wird auf die Haupt-Zeitskala
Sie Audio und MIDI in einem Takte|Schläge-Raster eingestellt.
erstellen, bearbeiten und arrangieren möchten.
Pro Tools erstellt mit dem Klick II-Plug-In auf dem So passen Sie die Metronom-Einstellungen an:
Insert der ersten Spur eine neue Auxiliary-Eingangs- 1 Wählen Sie Setup > Klick/Vorzählen.
Spur. Wenn Sie mit der Wiedergabe oder
Aufnahme beginnen, zählt Ihnen der Klick das 2 Wählen Sie eine der folgenden Optionen:
Tempo vor und bietet je nach Taktart und Tempo- • Bei Wiedergabe und Aufnahme – der Klick ist
Karte in der Pro Tools-Timeline eine fortlaufende während der Wiedergabe und der Aufnahme zu
Referenz. hören.
2 Wählen Sie Ansicht > Transport > MIDI • Nur bei Aufnahme – der Klick ist nur während
Bedienelemente, um die MIDI-Steuerelemente der Aufnahme, nicht während der Wiedergabe zu
im Transportfenster anzuzeigen. hören.
3 Stellen Sie sicher, dass im Transport-Fenster die • Nur beim Vorzählen – der Klick ist nur beim
Metronom- und die Vorzählen-Schaltflächen Vorzählen, vor Beginn von Aufnahme oder
aktiviert sind. Wiedergabe, zu hören.
Tempoauflösung
Tempo
Dirigent
Tempowechsel-Fenster (Schaltfläche)
Manuell Tempo-Modus
Sie können ein bestimmtes Tempo eingeben
oder mit der T-Taste das Tempo „klopfen“. 3 Klicken Sie auf den Tempo-Auflösung-Selektor
und wählen Sie einen Notenwert. (Bei 6/8 wählen
3 Stellen Sie Position auf „1|1|000“ (um das Sie beispielsweise eine punktierte Viertelnote
Standard-Event durch das eingefügte Tempo- oder bei 3/4 eine Viertelnote.)
Event zu ersetzen).
4 So geben Sie ein neues Tempo ein:
4 Wählen Sie im Auflösung-Popup-Menü einen
• Klicken Sie auf den Tempowert, geben Sie eine
Notenwert für den Takt aus. (Bei 6/8 wählen Sie
neue Zahl ein und drücken Sie die Eingabetaste.
beispielsweise eine punktierte Viertelnote.)
• Klicken Sie auf den Tempowert und ziehen Sie ihn
5 Klicken Sie auf OK. nach oben oder unten, um die Einstellung zu ändern.
Um detailliertere Anpassungen vorzunehmen,
halten Sie beim Ziehen die Befehlstaste (Mac)
bzw. die Strg-Taste (Windows) gedrückt.
• Klicken Sie auf den Tempowert und drücken Sie
die T-Taste auf Ihrer Computertastatur im
gewünschten Tempo, um einen Wert festzulegen.
5 Wenn Sie alle gewünschten Audiodateien und - Neue Spur – jede Audiodatei wird in eine eigene
Clips zur Importliste hinzugefügt haben, können Spur und in die Clipliste importiert.
Sie die Konvertierung der Samplerate wie im Clipliste – Audiodateien werden in die Clipliste
Folgenden beschrieben anwenden: importiert, ohne dass eine neue Spur erstellt wird.
• Aktivieren Sie SRC anwenden. Importierte Audiodateien werden in der Clipliste
• Geben Sie die Quell-Sample-Rate an, indem Sie angezeigt und können dann in Audiospuren
eine Zahl eingeben oder im Popup-Menü eine gezogen werden.
Samplerate auswählen. 9 Beim Erstellen einer neuen Spur wählen Sie eine
• Wählen Sie die Konvertierung der Samplerate im Position für die importierte Datei in der Spur aus:
Qualität-Popup-Menü aus. Diese Einstellung
Session-Start – platziert die Datei oder den Clip am
setzt die Sample Rate-Konvertierungsqualität-
Start der Session.
Einstellung in dem Voreinstellungen-Menü
“Bearbeitung” außer Kraft. Song-Start – setzt den Beginn der Datei oder des Clips
an den Songstart-Marker.
6 Klicken Sie auf Fertig.
7 Wenn Sie Dateien kopieren oder konvertieren, Auswahl – setzt den Beginn der Datei oder des Clips
wählen Sie einen Speicherort für die neuen auf den Edit-Cursor oder auf den Beginn einer
Dateien, etwa den Audiodateien-Ordner der Auswahl in der Timeline.
aktuellen Session. Beim Hinzufügen von Dateien Spot – zeigt das Spot-Dialogfeld an, über das Sie
wird auf den ursprünglichen Speicherort der die Datei oder den Clip an präzisen Positionen,
Datei verwiesen. basierend auf einer der verfügbaren Zeitskalen,
8 Wählen Sie im Audio-Importoptionen- positionieren können.
Dialogfeld aus, wo die importierten Dateien in 10 Klicken Sie auf OK.
der Session platziert werden sollen.
Workspace
Smart-Tool
Insert-
Selektor
Weitere Informationen zum Xpand!2-Plug-In finden Sie im AIR Creative Collection Plug-Ins Handbuch.
Klicken Sie oben im Plug-In-Fenster auf das Bibliothek-Menü (<Werkstandard>) und wählen Sie ein
Preset aus einem der Untermenüs. Bei Xpand!2 sind Presets in Untermenüs nach Kategorie geordnet.
3 Klicken Sie auf der eben erstellten Auxiliary-Eingangs-Spur auf den Input-Selektor und wählen Sie
Bus > Bus 1–2.
Input-Selektor
Auswählen von Bus 1-2 aus dem Input-Selektor auf einer Auxiliary-Eingangs-Spur
Send A-Selektor
5 Für weitere Spuren, die Sie zur Hallbearbeitung an die Auxiliary-Eingangs-Spur senden möchten,
wiederholen Sie den letzten Schritt.
Bus-Sends von einer Audiospur auf eine Auxiliary-Eingangs-Spur zur Reverb-Bearbeitung mit D-Verb
7 Zum Einstellen der Send-Pegel von Quellspuren können Sie einzelne Send-Output-Fenster verwenden.
Alternativ können Sie auch die Sends-Ansicht so einstellen, dass die Send-Steuerelemente für einen
bestimmten Send angezeigt werden (wählen Sie etwa Ansicht > Erweiterte Sends > Send A).
8 Drücken Sie die Leertaste und schieben Sie langsam den kleinen Fader im Send-Output-Fenster oder in
den Sends-Spur-Steuerelementen nach oben. Damit legen Sie fest, wie viel Ihrer Quellspur für die
Reverb-Verarbeitung an die Auxiliary-Eingangs-Spur gesendet wird.
9 Hören Sie sich das Resultat an, passen Sie die Send-Pegel der einzelnen Spuren an und testen Sie die
verschiedenen Plug-In-Einstellungen, bis Sie den richtigen Effekt für Ihren Mix gefunden haben.
Spurdarstel-
lung
Automations-Breakpoint „Lautstärke-
Automation“
Durch Ziehen dieser Breakpoints lassen sich die
Automationsdaten direkt im Edit-Fenster und in den Automation-
Spuren
MIDI Editor-Fenstern editieren. Wenn Sie einen
Automations-Breakpoint nach oben oder unten ziehen,
wird die Wertänderung angezeigt. Spurdarstellung und Automation-Spuren
Mit dem Stift-Tool können Sie neue Breakpoints Mit dem Trim-Tool können Sie alle selektierten
erzeugen, indem Sie auf die Diagrammlinie klicken. Breakpoints nach oben oder unten verschieben,
Zum Entfernen von Breakpoints klicken Sie mit indem Sie sie innerhalb der Selektion ziehen.
dem Stift-Tool bei gedrückter Wahl- (Mac) bzw.
Alt-Taste (Windows) darauf.
Selektor-Tool
Timeline-Selektion:
Session-Audio
selektiert und für
„Bounce auf die
Festplatte“ bereit
Nivel de auriculares
Nivel de volumen
principal
Barra de
herra-
mientas
Pistas
Ver la Edición
Ventana de Edición
• Si al iniciar Pro Tools se abre el cuadro de diálogo 1 Lleva a cabo uno de estos procedimientos:
Inicio Rápido, selecciona Crear Sesión en • Si vas a utilizar un micrófono, conéctalo a una
Blanco y haz clic en Aceptar. entrada Mic/Line del equipo Mbox mediante un
• Elige Archivo › Nueva Sesión. Si tienes una cable XLR.
sesión abierta actualmente, se te pedirá que • Si vas a utilizar un instrumento, conéctalo a una
guardes todos los cambios. En el cuadro de entrada DI del equipo Mbox con un cable con
diálogo Nueva Sesión, selecciona Crear Sesión conector de ¼".
en Blanco y haz clic en Aceptar.
2 Lleva a cabo uno de estos procedimientos:
3 En el cuadro de diálogo Guardar, selecciona la
• Si tienes un sistema Mbox, asegúrate de que el
ubicación donde desees guardar la sesión, dale
interruptor Front/Rear esté en la posición correcta
un nombre y haz clic en Guardar.
para una conexión frontal o posterior.
Mediante este procedimiento se ha creado una sesión • Si tienes un sistema Mbox Mini, según la entrada
nueva sin pistas. A continuación, puedes conectar un que uses, asegúrate de que el interruptor Line/DI
micrófono o cable de instrumento y crear pistas o Mic/Line esté en la posición correcta para el
nuevas para grabar audio. tipo de conexión.
Selector de fuente de
entrada 1 (conmutador
Front/Rear) Entrada 1
Entrada Mic/Line
Conexión de un micrófono mediante cable XLR a la entrada 1 Mic/Line del panel posterior de un sistema Mbox
Creación de una pista de audio mono Para grabar una pista de audio:
1 Haz clic en el botón Activar para grabación para
Si deseas grabar ambas entradas a la vez, crea una
habilitar la pista para grabar. El botón parpadeará
pista estéreo o dos pistas mono, dependiendo de lo
en rojo.
que tengas conectado y lo que pienses grabar:
• Para grabar dos fuentes diferentes (como un
micrófono de voz y una guitarra eléctrica), crea Activación para grabación
dos pistas de audio Mono. Esto permite grabar (botón)
dos señales de entrada a la vez. Tras la grabación,
puedes editarlas, procesarlas y equilibrarlas de Activación de una pista para grabar en la ventana de
forma independiente. Mezcla
• Para grabar una fuente estéreo de dos canales, como 2 Canta o interpreta algo frente al micrófono, o
un piano electrónico estéreo, crea una pista de bien toca el instrumento.
audio con la opción Estéreo.
Observa el nivel del medidor en la pista de Pro Tools
3 Comprueba que la ventana de Mezcla esté
mientras aumentas la ganancia de entrada en el
abierta. Para ello, elige Ventana › Mezcla.
interface de audio. (Observa que mover el
atenuador en pantalla no afecta a los niveles de
entrada; solo es para ajustar los niveles de
monitorización).
Contador principal
Modo Grid
Reglas de
base de
tiempo
Línea de tiempo
Línea de tiempo de Pro Tools con contador principal (tiempo en minutos y segundos)
Tempo
Botón Cuenta previa
2 Selecciona una de las opciones siguientes: Silencia la pista de metrónomo haciendo clic sobre
el botón M (silenciar) en los controles de pista.
• Durante reproducción y grabación: el
metrónomo suena durante la grabación y En la ventana de Transporte, anula la selección
reproducción. del botón Metrónomo, de forma que no se
muestre resaltado en azul. Después anula la
• Sólo durante grabación: el metrónomo se
selección del botón Descuento para que no esté
escuchará en la grabación, pero no en la
resaltado. (Hacer ambas cosas silencia la pista
reproducción.
de metrónomo y desactiva la opción Descuento).
• Sólo durante descuento: el metrónomo solo se
escuchará al realizar una cuenta previa antes de
que comience la grabación o la reproducción.
Resolución de tempo
Tempo
Pista de Director (botón)
Espacio de Trabajo
Para importar archivos como pistas nuevas: Cuenta Inicio de la formas de onda
1 Selecciona los archivos que quieras importar en previa pieza (canales derecho e
izquierdo)
un navegador de espacio de trabajo, el Explorador
de Windows o el Finder de Mac.
En la imagen, las formas de onda estéreo te permiten
2 Efectúa cualquiera de los procedimientos visualizar las distintas secciones del tema musical.
siguientes: Podemos aprovechar la característica “lo que se ve
es lo que se oye” de Pro Tools para silenciar
• Pulsa Mayús y arrastra los archivos a la ventana
rápidamente la cuenta previa ajustando el inicio de
de Edición.
la canción.
• Arrastra los archivos a la lista de pistas.
• Arrastra archivos hasta un espacio vacío en la
ventana de Edición, debajo de las pistas o entre
pistas.
Separación y reorganización de
clips
Hay varias maneras de crear nuevos clips de audio
en Pro Tools: Puedes importar o grabar clips de audio
de archivo entero. También puedes crear clips de
audio que solo se refieren a partes de archivos de
audio mediante ajuste (consulta “Ajuste de clips de
Clips nuevos creados al separar el clip superior en el
audio” en la página 132) o separando clips de límite de la selección de edición
archivo entero.
Selector
de inserto
Para mayor información sobre el plug-in Xpand!2, consulta el manual AIR Creative Collection Plug-Ins
Guide.
En la parte superior de la ventana del plug-in, haz clic en el menú Librería (<ajuste de fábrica> se encuentra
seleccionada de forma predeterminada) y selecciona un preset de cualquiera de los submenús. Con
Xpand!2, los presets se agrupan en submenús por categoría.
Importa una secuencia MIDI (o programa una 3 Selecciona un preset de bajo (también conocido
secuencia MIDI) a la pista de instrumento en la que como “patch”).
está insertado el instrumento virtual, y comienza 4 Selecciona Options › MIDI Thru. (Comprueba que
a reproducir. la opción MIDI Thru esté seleccionada; si no lo
está, selecciónala).
5 Haz clic en el botón Activar para grabación para
activar la pista de instrumento para la grabación
MIDI.
6 En la ventana de transporte, haz clic en el botón
Grabar.
7 Toca usando el teclado del controlador MIDI.
Deberías escuchar el sonido que has seleccionado.
8 Cuando tengas todo listo para grabar, haz clic en
el botón Reproducir o pulsa la barra espaciadora.
Para parar, haz clic en Detener o pulsa la barra
espaciadora.
2 Con la herramienta de lápiz o cualquier 2 Selecciona las notas que desees ajustar.
herramienta de mano, arrastra la nota hacia la 3 Lleva a cabo uno de estos procedimientos:
derecha o hacia la izquierda (pulsa la tecla
• Selecciona la herramienta de ajuste.
Mayús durante el arrastre para conservar la
altura de la nota). • Utiliza la herramienta de lápiz.
El indicador del valor de ubicación del cursor (en la 4 Coloca el cursor cerca del comienzo de cualquier
ventana de Edición) muestra dinámicamente el nota resaltada para que aparezca la herramienta
nuevo punto de inicio a medida que se arrastra la de ajuste. Arrastra las notas a la derecha para
nota. acortarlas o a la izquierda para alargarlas.
Cuando una pista MIDI o de instrumento está Además de eliminar las notas seleccionadas con el
configurada en la vista de velocidad, o cuando la comando Borrar del menú Editar, las notas también
ruta de velocidad se muestra bajo una pista, la se pueden eliminar una a una con la herramienta de
velocidad de ataque de cada una de las notas se lápiz.
representa con un tallo de velocidad. Cuanto más
alto sea este indicador, mayor será el valor de Para eliminar un grupo de notas MIDI con el
velocidad (0-127). comando Borrar:
1 Selecciona las notas que quieras eliminar.
Para editar la velocidad MIDI en la ventana de
Edición: 2 Lleva a cabo uno de estos procedimientos:
1 Lleva a cabo uno de estos procedimientos: • Elige Editar › Borrar para eliminar las notas
seleccionadas. Los datos de controlador
• Configura la pista MIDI o de instrumento en la
subyacentes en la pista permanecen intactos.
vista de velocidad.
• Con cualquier herramienta de edición, haz clic
• Muestra la ruta de controlador de la pista MIDI o
derecho en cualquier nota seleccionada y elige
de instrumento y la velocidad
Borrar.
• Pulsa la tecla Supr (Mac) o Retroceso (Windows).
Mostrar ruta de velocidad Para eliminar una nota MIDI con la herramienta de
lápiz:
2 Selecciona cualquier herramienta de mano.
Con la herramienta de lápiz seleccionada, pulsa
3 Arrastra la parte superior (en forma de rombo) la tecla Opción (Mac) o Alt (Windows) y haz clic
del indicador de velocidad arriba o abajo. en la nota. La herramienta de lápiz se convierte en
una goma de borrar al pulsar la tecla Opción (Mac)
o Alt (Windows).
3 En la pista de entrada auxiliar que has añadido, haz clic en el selector de entrada de pista y selecciona
Bus › Bus 1–2.
Selector de entrada
de pista
Seleccionar Bus 1–2 del selector de entrada o una pista de entrada auxiliar
Selector de
envío A
5 Repite el paso anterior por cada pista adicional que desees enviar a la pista de entrada auxiliar para
procesar con reverb.
Enviar pistas de audio a una pista de entrada auxiliar para procesamiento de reverb con D-Verb
7 Puedes usar las ventanas individuales Salida de Envío para ajustar el nivel de envío de pistas fuente; o
puedes configura la opción vista de envíos para mostrar los controles de envío para un envío concreto (por
ejemplo, selecciona Ver › Envíos Expandidos › Envíos A).
8 Pulsa la barra espaciadora y levanta lentamente el pequeño atenuador en la ventana Salida de Envío o
en los controles de pista Envios. Esto ajusta qué cantidad de la pista fuente envías a la pista de entrada
auxiliar para procesamiento con reverb.
9 Sigue escuchando y reproduciendo, ajustando los niveles individuales de envío, y comprobando distintos
ajustes de plug-ins para encontrar el efecto apropiado para tu mezcla.
Selector de
vista de pista
Selector de Uso de la herramienta de lápiz para eliminar un punto
tipo de crítico
automatización Uso de las herramientas de ajuste
Vista de pista de
automatización La herramienta de ajuste permite ajustar los puntos
de volumen críticos seleccionados hacia arriba o hacia abajo
arrastrándolos a cualquier lugar en la selección.
Rutas de
automatización
Herramienta de selección
Selección de línea
de tiempo
Sesión de audio
seleccionada y lista
para usar el comando
Realizar Bounce a
Disco
2 Elige Archivo › Realizar Bounce a › Disco. 3 En el cuadro de diálogo Realizar Bounce, haz lo
siguiente:
• Selecciona la fuente como Fuente del Bounce
(este será el camino principal para tu mezcla,
Principal (Estéreo) –› Analog 1–2).).
• Selecciona el tipo de archivo (como por ejemplo
WAV).
• Selecciona Intercalado como formato.
• Si vas a grabar el archivo de audio exportado a
CD, selecciona 16 Bits para la profundidad de
bits (Bit Depth).
• Si vas a grabar el archivo de audio exportado a
CD, selecciona 44.1 kHz en Frequencia de
Muestreo (Sample Rate).
• Para un hacer bounce más rápido que en tiempo
Cuadro de diálogo Realizar Bounce real, selecciona la opción Offline.
࣊ࢵࢻࣇ࢛ࣥࡲࡓࡣࢫࣆ࣮࣮࢝ࢆ᥋⥆ࡍࡿ
Pro Tools ࡛࣮࢜ࢹ࢜ࢆ⫈ࡃࡣࠊ࣮࢜ࢹ࣭࢜ࣥࢱ࣮ࣇ࢙ࢫ࣊ࢵࢻࣇ࢛ࣥࡲࡓࡣ
ࢫࣆ࣮࣮࢝ࢆ᥋⥆ࡋࡲࡍ㸦ࡇࡢ࢞ࢻ࡛ࡣ Pro Tools | Mbox ® ࣮࢜ࢹ࣭࢜ࣥࢱ࣮ࣇ࢙
ࢫࢆㄝ᫂ࡋࡲࡍ㸧ࠋ࣊ࢵࢻࣇ࢛ࣥࢆࡈ⏝ࡢሙྜࠊ࣊ࢵࢻࣇ࢛࣭ࣥࣞ࣋ࣝࢆୗࡆ࡚࠾
ࡁࡲࡍ㸦ࣀࣈࢆィᅇࡾᅇࡍ㸧ࠋࢫࣆ࣮࣮࢝ࢆࡈ⏝ࡢሙྜࠊ࣐ࢫࢱ࣮࣭࣮࣒࣭࣎ࣜࣗ
ࣞ࣋ࣝࢆୗࡆ࡚࠾ࡁࡲࡍ㸦ࣀࣈࢆィᅇࡾᅇࡍ㸧ࠋ⫈ຊࡲࡓࡣࡈ⏝ࡢᶵჾࡢᦆയࢆ
㜵ࡄࡓࡵࡶࠊ࣮࣒࣎ࣜࣗࢆ᭱ᑠࡋ࡚࠾ࡃࡇࡀ㔜せ࡛ࡍࠋPro Tools ࢆ㉳ືࡋࢭࢵࢩࣙࣥࢆ
㛤࠸࡚ࡽ㸦ࡲࡓࡣ᪂つࢭࢵࢩࣙࣥࢆసᡂࡋ࡚ࡽ㸧ࠊ࣮࣒࣭࣎ࣜࣗࢥࣥࢺ࣮ࣟࣝࢆືࡋ
࡚㐺ษ࡞ࣞ࣋ࣝ࡞ࡿࡼ࠺ㄪᩚࡋࡲࡍࠋ
࣊ࢵࢻࣇ࢛࣭ࣥࣞ࣋ࣝ
࣐ࢫࢱ࣮࣭࣮࣒࣭࣎ࣜࣗ
ࣞ࣋ࣝ
1/4 ࣥࢳ࣭࣊ࢵࢻࣇ࢛࣭ࣥࢪࣕࢵࢡ
Mbox ࣇࣟࣥࢺ࣭ࣃࢿࣝࡢࢥࢿࢡࢱ࣮ࢥࣥࢺ࣮ࣟࣝ
ࢹ࣭ࣔࢭࢵࢩࣙࣥࢆ⏕ࡍࡿ
ࢹ࣭ࣔࢭࢵࢩࣙࣥࢆ⏝ࡋ࡚ࠊ࣊ࢵࢻࣇ࢛ࣥࡸࢫࣆ࣮࣮࢝ࡢࢸࢫࢺࢆ⾜ࡗࡓࡾࠊPro Tools
ࡢᶵ⬟ࢆヨࡍࡇࡀ࡛ࡁࡲࡍࠋ
ࢹ࣭ࣔࢭࢵࢩࣙࣥࢆࣥࢫࢺ࣮ࣝࡋ࡚㛤ࡃࡣ㸸
1 ௨ୗࡢ࠸ࡎࢀࡢ᧯సࢆ⾜࠸ࡲࡍࠋ
• Pro Tools ࣥࢫࢺ࣮࣮࣭ࣛࢹࢫࢡࢆ DVD ࢻࣛࣈᤄධࡋࠊ㹙 Additional Files 㹛ࣇ࢛ࣝ
ࢲ࣮ࢆ㛤࠸࡚㹙 Demo Session 㹛ࣇ࢛ࣝࢲ࣮ࢆࣁ࣮ࢻࢹࢫࢡࢻࣛࢵࢢࡋࡲࡍࠋ 㸦᭱㐺
ࡢࣃࣇ࢛࣮࣐ࣥࢫࢆᚓࡿࡣࠊࢩࢫࢸ࣒࣭ࢻࣛࣈ࡛ࡣ࡞ࡃ Avid ࡢせ௳ࢆ‶ࡓࡋࡓእࡅ
ࣁ࣮ࢻࢹࢫࢡࢆࡈ⏝ࡃࡔࡉ࠸ࠋ㸧
• Pro Tools ࡢࢹ࣭ࣔࢭࢵࢩࣙࣥࢆࠊ࢜ࣥࣛࣥࡢ Avid ࢝࢘ࣥࢺ Avid ࡽࣁ࣮ࢻࢹࢫ
ࢡࢲ࣮࢘ࣥࣟࢻࡋࡲࡍ㸦᭱㐺ࡢࣃࣇ࢛࣮࣐ࣥࢫࢆᚓࡿࡣࠊࢩࢫࢸ࣒࣭ࢻࣛࣈ࡛
ࡣ࡞ࡃ Avid ࡢせ௳ࢆ‶ࡓࡋࡓእࡅࣁ࣮ࢻࢹࢫࢡࢆࡈ⏝ࡃࡔࡉ࠸㸧ࠋ
2 Pro Tools ࢆ㉳ືࡋࡲࡍࠋ
3 ⏬㠃ୖࡢ⾲♧ᛂࡌ࡚௨ୗࡢ࠸ࡎࢀࢆ⾜࠸ࡲࡍࠋ
• ࢡࢵࢡࢫࢱ࣮ࢺ࣭ࢲࣟࢢࡀ⾲♧ࡉࢀࡓሙྜࠊ㹙ࢭࢵࢩࣙࣥࢆ㛤ࡃ㹛㸦Open Session㸧
㹙 Demo Session 㹛ࣇࣝ㸦 .ptx 㸧ࢆ㑅ᢥ
ࢆࢡࣜࢵࢡࡋ࡚ࡽ㹙OK㹛ࢆࢡࣜࢵࢡࡋࡲࡍࠋ
ࡋࠊ㹙㛤ࡃ㹛㸦Open㸧ࢆࢡࣜࢵࢡࡋࡲࡍࠋ
•㹙ࢡࢵࢡࢫࢱ࣮ࢺ㹛
㸦 Quick Start 㸧ࢲࣟࢢࡀ⾲♧ࡉࢀ࡞࠸ሙྜࡣࠊ
㹙ࣇࣝ㹛
㸦File㸧
> 㹙ࢭࢵࢩࣙࣥࢆ㛤ࡃ㹛㸦Open Session㸧ࢆ㑅ᢥࡋ࡚ ࢹ࣭ࣔࢭࢵࢩ࣭ࣙࣥࣇࣝࢆᣦᐃ
ࡋࠊ㹙㛤ࡃ㹛㸦 Open 㸧ࢆࢡࣜࢵࢡࡋࡲࡍࠋ
ࢹ࣭ࣔࢭࢵࢩࣙࣥࡘ࠸࡚ヲࡋࡃࡣࠊࠗࢹ࣭ࣔࢭࢵࢩࣙࣥ ࠾ㄞࡳࡃࡔࡉ࠸࠘ࢆࡈཧ↷ࡃ
ࡔࡉ࠸ࠋ
ࢺࣛࢵࢡ
ࢹ࣭ࣔࢭࢵࢩࣙࣥࢆ⏕ࡍࡿࡣ㸸
1 ࣮࢜ࢹ࢜ࡀ㡢㔞࡛⏕ࡉࢀ࡞࠸ࡼ࠺ࠊ࣮࢜ࢹ࣭࢜ࣥࢱ࣮ࣇ࢙ࢫࡢ࣮࣒࣎ࣜࣗࢆ
ୗࡆ࡚࠾ࡁࡲࡍࠋ
2 Pro Tools ࡛ࢹ࣭ࣔࢭࢵࢩࣙࣥࡢ⏕ࢆ㛤ጞࡋࡲࡍࠋ Pro Tools ࢆ⏕ࡲࡓࡣṆࡍࡿ
ࡣࠊ௨ୗࡢ࠸ࡎࢀࢆ⾜࠸ࡲࡍࠋ
• ࢥࣥࣆ࣮ࣗࢱ࣮࣭࣮࣮࢟࣎ࢻࡢࢫ࣮࣌ࢫࣂ࣮ࢆᢲࡋࡲࡍࠋ
• ࢺࣛࣥࢫ࣏࣮ࢺ࣭࢘ࣥࢻ࢘㸦㹙࢘ࣥࢻ࢘㹛
㸦Window㸧> 㹙ࢺࣛࣥࢫ࣏࣮ࢺ㹛
㸦Transport㸧㸧ࡲࡓࡣ⦅㞟࢘ࣥࢻ࣭࢘ࢶ࣮ࣝࣂ࣮ࡢ⏕
ࡲࡓࡣṆ࣎ࢱࣥࢆࢡࣜࢵࢡࡋࡲࡍࠋ
Ṇ ⏕
ࢺࣛࣥࢫ࣏࣮ࢺ࣭࢘ࣥࢻ࢘ࡢṆ⏕ࡢࢥࣥࢺ࣮ࣟࣝ
• MIDI ࢚ࢹࢱ࣮࣭࢘ࣥࢻ࡛࢘ࡣࠊࠕࣆ
ࣀ࣮ࣟࣝࠖࢫࢱࣝࡢࣥࢱ࣮ࣇ࢙
ࢫࠊࣈ࣮ࣞࢡ࣏ࣥࢺ⦅㞟࠾ࡼࡧ୍⯡ⓗ
࡞グ㆕ἲࢆ⏝ࡋ࡚ MIDI ࢹ࣮ࢱࢆ⦅㞟
࡛ࡁࡲࡍࠋ
⦅㞟࢘ࣥࢻ࢘ࢆ⾲♧ࡍࡿࡣ㸸
㹙࢘ࣥࢻ࢘㹛
㸦Window㸧> 㹙⦅㞟㹛
㸦Edit㸧ࢆ㑅ᢥࡋࡲࡍࠋ
⦅㞟࢘ࣥࢻ࢘ࡢࡍ࡚ࡢ⾲♧࢜ࣉࢩࣙࣥࢆ⾲♧ࡍࡿࡣ㸸
㹙⾲♧㹛
㸦View㸧> 㹙⦅㞟࢘ࣥࢻ࢘㹛
㸦Edit Window㸧> 㹙ࡍ࡚㹛
㸦All㸧 ࢆ㑅ᢥࡋࡲࡍࠋ
⦅㞟࢘ࣥࢻ࢘
࣑ࢵࢡࢫ࣭࢘ࣥࢻ࢘ࢆ⾲♧ࡍࡿࡣ㸸
㹙࢘ࣥࢻ࢘㹛
㸦Window㸧> 㹙࣑ࢵࢡࢫ㹛
㸦Mix㸧 ࢆ㑅ᢥࡋࡲࡍࠋ
࣑ࢵࢡࢫ࣭࢘ࣥࢻ࢘ࡢࡍ࡚ࡢ⾲♧࢜ࣉࢩࣙࣥࢆ⾲♧ࡍࡿࡣ㸸
㹙⾲♧㹛
㸦View㸧> 㹙࣑ࢵࢡࢫ࢘ࣥࢻ࢘㹛
㸦Mix Window㸧> 㹙ࡍ࡚㹛
㸦All㸧 ࢆ㑅ᢥࡋࡲࡍࠋ
࣑ࢵࢡࢫ࣭࢘ࣥࢻ࢘㸦ࢺࣛࣥࢫ࣏࣮ࢺࣉࣛࢢ࣭ࣥ࢘ࣥࢻ࢘ࢆ⾲♧㸧
ࡇࢀ࡛ࠊࢺࣛࢵࢡࡀྵࡲࢀ࡚࠸࡞࠸᪂ࡋ࠸
ࢭࢵࢩࣙࣥࡀసᡂࡉࢀࡲࡋࡓࠋḟࠊ࣐
ࢡࡲࡓࡣᴦჾࢣ࣮ࣈࣝࢆ᥋⥆ࡋࠊ࣮࢜ࢹ
࢜㘓㡢⏝ࡢ᪂つࢺࣛࢵࢡࢆసᡂࡋࡲࡍࠋ
ࢺࣛࢵࢡࢆసᡂࡍࡿ
࣮࢜ࢹ࣭࢜ࢺࣛࢵࢡࢆసᡂࡋ࡚ࣞࢥ࣮ࢹࣥࢢࡢ‽ഛࢆࡍࡿࡣ㸸
1 ᪂つࢭࢵࢩࣙࣥࢆసᡂࡍࡿࠊ᪤Ꮡࡢࢭࢵࢩࣙࣥࢆ㛤ࡁࡲࡍࠋ
2 㹙ࢺࣛࢵࢡ㹛
㸦Track㸧> 㹙᪂つ㹛
㸦New㸧 ࢆ㑅ᢥࡋࡲࡍࠋ
3 ࡈ⏝ࡢ࣮࢜ࢹ࣭࢜ࣥࢱ࣮ࣇ࢙ࢫ᥋⥆ࡉࢀ࡚࠸ࡿ 1 ࡘࡢ࣐ࢡࡲࡓࡣࣥࢫࢺ
࣓ࣝࣥࢺࢆ㘓㡢ࡍࡿࡣࠊ 㹙᪂つࢺࣛࢵࢡ㹛㸦 New Tracks 㸧ࢲࣟࢢ࡛ࠊ 1 ࡘࡢ㹙 Mono 㹛
㹙࣮࢜ࢹ࢜ࢺࣛࢵࢡ㹛㸦 Audio Track 㸧ࢆ㹙ࢧࣥࣉࣝ㹛㸦 Samples 㸧ᙧᘧ࡛ᣦᐃࡋࠊ㹙సᡂ㹛
㸦 Create 㸧ࢆࢡࣜࢵࢡࡋࡲࡍࠋ
᪂つࣔࣀ࣭࣮࢜ࢹ࣭࢜ࢺࣛࢵࢡࢆసᡂࡍࡿ
2 ࡘࡢධຊࢆྠ㘓㡢ࡋࡓ࠸ሙྜࠊ᥋⥆ࡉࢀ࡚࠸ࡿᶵჾ࠾ࡼࡧ㘓㡢ᑐ㇟ᛂࡌ࡚ࠊ1 ࡘࡢ
ࢫࢸ࣭ࣞ࢜ࢺࣛࢵࢡࡲࡓࡣ 2 ࡘࡢࣔࣀ࣭ࢺࣛࢵࢡࢆసᡂࡋࡲࡍࠋ
• 2 ࡘࡢ␗࡞ࡿࢯ࣮ࢫ㸦 1 ࡘࡢ࣮࣭࣐࣎࢝ࣝࢡ 1 ྎࡢ࢚࣭ࣞ࢟ࢠࢱ࣮࡞㸧ࢆ㘓㡢ࡍࡿ
ࡁࡣࠊࣔࣀ࣭࣮࢜ࢹ࣭࢜ࢺࣛࢵࢡࢆ 2 ࡘసᡂࡋࡲࡍࠋࡇࢀ࡛ 2 ࡘࡢධຊಙྕࢆྠ
㘓㡢ࡍࡿࡇࡀ࡛ࡁࡲࡍࠋ㘓㡢ᚋࠊ⦅㞟ࠊࣉࣟࢭࢵࢩࣥࢢࠊࣂࣛࣥࢩࣥࢢࢆಶู᧯స࡛
ࡁࡲࡍࠋ
• 2 ࢳࣕࣥࢿࣝࡢࢫࢸ࣭ࣞ࢜ࢯ࣮ࢫ㸦ࢫࢸ࣭࣮࣮ࣞ࢜࢟࣎ࢻ࡞㸧ࢆ㘓㡢ࡍࡿࡁࡣࠊࢫࢸ
࣭࣮ࣞ࢜࢜ࢹ࣭࢜ࢺࣛࢵࢡࢆ 1 ࡘసᡂࡋࡲࡍࠋ
4 㹙࢘ࣥࢻ࢘㹛
㸦Window㸧 > 㹙࣑ࢵࢡࢫ㹛
㸦Mix㸧ࢆ㑅ᢥࡋࠊ࣑ࢵࢡࢫ࣭࢘ࣥࢻ࢘ࡀ㛤࠸࡚
࠸ࡿࡇࢆ☜ㄆࡋࡲࡍࠋ
࣮࢜ࢹ࣭࢜
ࣥࣉࢵࢺ࣭ • ࢺࣛࢵࢡ࣭࣓࣮ࢱ࣮ࡀ㉥Ⰽ࡞ࡿࡼ࠺࡞
ࣃࢫ࣭ࢭࣞࢡ ࡽࠊࢤࣥࡀ㧗ࡍࡂࡲࡍࠋࡑࡢሙྜࡣࢤ
ࢱ࣮ ࣥࢆୗࡆࡲࡍࠋ
• ࢺࣛࢵࢡ࣭࣓࣮ࢱ࣮ࡀࢇ⥳Ⰽ࡞
ࡽ࡞࠸ࡼ࠺࡞ࡽࠊࢤࣥࡀపࡍࡂࡲࡍࠋࡑ
ࡢሙྜࡣࢤࣥࢆୖࡆࡲࡍࠋ
₇ዌࢆࢺࣛࢵࢡ㘓㡢ࡍࡿ
࣮࢜ࢹ࣭࢜ࢺࣛࢵࢡ㘓㡢ࡍࡿࡣ㸸
1 ࢺࣛࢵࢡࡢࣞࢥ࣮ࢻ࣭࣎ࢱࣥࢆࢡࣜࢵࢡ
ࡋࠊࢺࣛࢵࢡࢆ㘓㡢ྍ⬟ࡋࡲࡍࠋ࣎ࢱࣥ
ࡀ㉥ⰍⅬ⁛ࡋࡲࡍࠋ
ࣞࢥ࣮ࢻ࣭࣎ࢱࣥ
࣑ࢵࢡࢫ࣭࢘ࣥࢻ࡛࢘ࢺࣛࢵࢡࢆ㘓㡢ྍ⬟ࡍࡿ
ࢺࣛࢵࢡ࣭࣓࣮ࢱ࣮
2 ࣐ࢡ㡢ኌࢆ྿ࡁ㎸ࡴࠊᴦჾࢆ₇ዌ
ࡋࡲࡍࠋ
ࡈ⏝ࡢ࣮࢜ࢹ࣭࢜ࣥࢱ࣮ࣇ࢙ࢫࡢ
ࢤࣥࢆୖࡆ࡞ࡀࡽ Pro Tools ࢺࣛࢵࢡࡢ
࣓࣮ࢱ࣮ࢆ☜ㄆࡋࡲࡍࠋ㸦⏬㠃ୖࡢࣇ࢙࣮
ࢲ࣮ࢆືࡋ࡚ࡶࠊࣥࣉࢵࢺ࣭ࣞ࣋ࣝ
ࡣᙳ㡪ࡋࡲࡏࢇࠋ⏬㠃ୖࡢࣇ࢙࣮ࢲ࣮ࡣࣔ
ࢽࢱࣜࣥࢢ࣭ࣞ࣋ࣝࡢㄪᩚࡢࡳ⏝ࡋࡲ
ࡍࠋ㸧
㘓㡢ࡋࡓࢺࣛࢵࢡࢆ⏕ࡍࡿࡣ㸸
1 ࢺࣛࢵࢡࡢࣞࢥ࣮ࢻ࣭࣎ࢱࣥࢆࡶ࠺୍ᗘ
ࢡࣜࢵࢡࡋࠊࣞࢥ࣮ࢻ࣭࣮ࣔࢻࢆ⤊ࡋࡲ
ࡍࠋࣞࢥ࣮ࢻ࣭࣎ࢱࣥࡢ㉥ⰍࡢⅬ⁛ࡀṆࡲ
ࡾࡲࡍࠋ
6 㹙࢘ࣥࢻ࢘㹛
㸦Window㸧> 㹙⦅㞟㹛
㸦Edit㸧 2 ⏕ࢆ㛤ጞࡍࡿࡣࠊࢫ࣮࣌ࢫࣂ࣮ࢆᢲ
ࢆ㑅ᢥࡋࠊ㘓㡢≧ែࢆどㄆ࡛ࡁࡿࡼ࠺ࡋ ࡍ ࠊࢺ ࣛ ࣥ ࢫ ࣏ ࣮ ࢺ ࡢ ⏕ ࣎ ࢱ ࣥ ࢆ ࢡ
࡚࠾ࡁࡲࡍࠋ ࣜࢵࢡࡋࡲࡍࠋ
7 㘓㡢ࢆ㛤ጞࡍࡿ‽ഛࡀᩚࡗࡓࡽࠊࢫ࣮࣌ 3 ⏕ࢆṆࡍࡿࡣࠊࢫ࣮࣌ࢫࣂ࣮ࢆᢲ
ࢫࣂ࣮ࢆᢲࡍࠊࢺࣛࣥࢫ࣏࣮ࢺࡢ⏕࣎ ࡍ ࠊࢺ ࣛ ࣥ ࢫ ࣏ ࣮ ࢺ ࡢ Ṇ ࣎ ࢱ ࣥ ࢆ ࢡ
ࢱࣥࢆࢡࣜࢵࢡࡋࡲࡍࠋࢺࣛࣥࢫ࣏࣮ࢺࡢ ࣜࢵࢡࡋࡲࡍࠋ
ࣞࢥ࣮ࢻ࣭࣎ࢱࣥࢺࣛࢵࢡࡢࣞࢥ࣮ࢻ࣭
࣎ࢱࣥࡀⅬ⁛ࢆṆࡋࠊ㘓㡢୰ࡣⅬⅉࡋࡓ 」ᩘࡢࢺࣛࢵࢡࢆࣞࢥ࣮ࢹࣥࢢࡍࡿ
ࡲࡲ࡞ࡾࡲࡍࠋ
ྠࡌᡭ㡰ࢆ⧞ࡾ㏉ࡍࡇ࡛ࠊูࡢ࣮࢜ࢹ
8 㘓㡢ࢆṆࡍࡿࡣࠊࡶ࠺୍ᗘࢫ࣮࣌ࢫ ࣭࢜ࢺࣛࢵࢡ㸦ࣔࣀࡲࡓࡣࢫࢸࣞ࢜㸧ࢆస
ࣂ࣮ࢆᢲࡍࠊࢺࣛࣥࢫ࣏࣮ࢺࡢṆ࣎ࢱࣥ ᡂࡋࠊࡉࡽከࡃࡢࢺࣛࢵࢡࢆ㘓㡢ࡍࡿࡇ
ࢆࢡࣜࢵࢡࡋࡲࡍࠋ㸦ࢺ ࣛ ࣥ ࢫ ࣏ ࣮ ࢺ ࡢ ࣞ ࡀ࡛ࡁࡲࡍࠋࡇ࠺ࡋ࡚ࠊࡍ࡛㘓㡢ࡉࢀ
ࢥ࣮ࢻ࣭࣎ࢱࣥࡀ࢜ࣇ࡞ࡾࡲࡍࡀࠊࢺࣛࢵ ࡚࠸ࡿࢺࣛࢵࢡᑐࡋู࡚ࡢࣃ࣮ࢺࢆ㘓㡢
ࢡࡢࣞࢥ࣮ࢻ࣭࣎ࢱࣥࡣ࢜ࣥࡢࡲࡲ࡞ࡾࠊ ࡍࡿࡇࡀ࡛ࡁࡲࡍࠋࡇࢀࡣࠊࡉࡲࡊࡲ࡞
ࢡࣜࢵࢡࡍࡿࡲ࡛㉥ⰍⅬ⁛ࢆ⥆ࡅࡲࡍࠋ㸧 ࣃ࣮ࢺࢆ㔜ࡡ࡚ᴦ᭤ࡢࣞࣥࢪࢆసᡂࡍࡿ
㝿୍⯡ⓗ⏝ࡉࢀࡿไసࢸࢡࢽࢵࢡ࡛
ࡇࢀ࡛ࠊ࣮࢜ࢹ࣭࢜ࢺࣛࢵࢡࢆ㘓㡢ࡍࡿ
ࡍࠋ
ࡇࡀ࡛ࡁࡲࡋࡓࠋ
࣓࣭ࣥ࢝࢘ࣥࢱ࣮
ࢢࣜࢵࢻ࣭
࣮ࣔࢻ
ࢱ࣒࣮࣋ࢫ࣭
࣮࣮ࣝࣛ
ࢱ࣒ࣛࣥ
࣓࣭ࣥ࢝࢘ࣥࢱ࣮ࡢࢭࣞࢡࢱ࣮㸦⦅㞟࢘ࣥࢻ࢘ࡲࡓࡣ࢝࢘ࣥࢱ࣮ࡀ⾲♧ࡉࢀ࡚࠸ࡿࢺࣛ
ࣥࢫ࣏࣮ࢺ࣭࢘ࣥࢻ࢘ࡢ୍␒ୖ㸧ࢆࢡࣜࢵࢡࡋࠊࢱ࣒ࢫࢣ࣮ࣝࢆ㑅ᢥࡋࡲࡍࠋ
࣓࣭ࣥ࢝࢘ࣥࢱ࣮ࡢࢭࣞࢡࢱ࣮㸦⦅㞟࢘ࣥࢻ࢘㸧
ࢱ࣒࣮࣋ࢫ࣭࣮࣮ࣝࣛࡀ⾲♧ࡉࢀ࡚࠸ࡿࡁࡣࠊࡑࡢྡ๓ࢆࢡࣜࢵࢡࡍࡿࣁࣛࢺ⾲
♧ࡉࢀࡲࡍࠋ
ࢧࣈ࣭࢝࢘ࣥࢱ࣮⾲♧ࡉࢀ࡚࠸ࡿࢱ࣒࣮࣋ࢫࢆ࣓࣭ࣥࢱ࣒ࢫࢣ࣮ࣝタᐃ
ࡍࡿࠊࡑࢀࡲ࡛࣓࣭ࣥࢱ࣒࣮࣋ࢫ⾲♧ࡉࢀ࡚࠸ࡓࢱ࣒࣮࣋ࢫࡀࢧࣈ࣭ࢱ
࣒ࢫࢣ࣮ࣝタᐃࡉࢀࡲࡍࠋ
࣓࣭ࣥࢱ࣒ࢫࢣ࣮ࣝࢆ㹙ᑠ⠇ | ᢿ㹛タᐃࡍࡿ
ࢡࣜࢵࢡ࣭ࢺࣛࢵࢡࢆ⏝ࡋ࡚㘓㡢ࡍࡿ
ࢡࣜࢵࢡ࣭ࢺࣛࢵࢡࡣࠊ㘓㡢୰ࠊࢸ࣏ࣥࡢཧ↷࡞ࡿ࣓ࢺࣟࣀ࣮࣒㡢ࢆ⏕ࡋࡲࡍࠋ≉ᐃࡢ
ᢿᏊࢸ࣏ࣥྜࢃࡏ࡚ࢺࣛࢵࢡࢆ㘓㡢࣭⦅㞟ࡋࡓ࠸ሙྜࡣࠊ࣓࣭ࣥࢫࢣ࣮ࣝࢆ㹙ศ :
⛊㹛࡛ࡣ࡞ࡃ㹙ᑠ⠇ | ᢿ㹛タᐃࡋࡲࡍࠋ
ࢡࣜࢵࢡ࣭ࢺࣛࢵࢡࢆసᡂࡍࡿࡣ㸸
1 㹙ࢺࣛࢵࢡ㹛
㸦Track㸧> 㹙ࢡࣜࢵࢡࢺࣛࢵࢡసᡂ㹛
㸦Create Click Track㸧 ࢆ㑅ᢥࡋࡲࡍࠋ
ࢸ࣏ࣥ
࢝࢘ࣥࢺ࢜ࣇ࣭࣎ࢱࣥ
[ ࢡࣜࢵࢡ / ࢝࢘ࣥࢺ࢜ࣉࢩࣙࣥ㹛࢘ࣥࢻ࢘
3 㹙OK㹛 ࢆࢡࣜࢵࢡࡋࡲࡍࠋ
࣓ࢺࣟࣀ࣮࣒࣭࣎ࢱࣥ ࢡࣜࢵࢡ࣭ࢺࣛࢵࢡࢆ↓㡢ࡍࡿࡣࠊ௨ୗࡢ࠸ࡎࢀ
ࢥࣥࢲࢡࢱ࣮࣭࣎ࢱࣥ ࢆ⾜࠸ࡲࡍࠋ
ࢡࣜࢵࢡ࣭ࢺࣛࢵࢡࡢ M㸦࣑࣮ࣗࢺ㸧࣎
ࢡࣜࢵࢡ㡢ࡢタᐃࢆ⾜࠺ࡣ㸸 ࢱࣥࢆࢡࣜࢵࢡࡋࠊࢡࣜࢵࢡ࣭ࢺࣛࢵࢡࢆ
࣑࣮ࣗࢺࡋࡲࡍࠋ
1㹙タᐃ㹛 㸦Setup㸧> 㹙ࢡࣜࢵࢡ / ࢝࢘ࣥࢺ࢜
ࣇ㹛㸦Click/Countoff㸧 ࢆ㑅ᢥࡋࡲࡍࠋ ࢺ ࣛ ࣥ ࢫ ࣏ ࣮ ࢺ࣭࢘ ࣥ ࢻ ࢘ ࡛ ࣓ ࢺ ࣟ
ࣀ࣮࣒࣭࣎ࢱࣥࡢ㑅ᢥࢆゎ㝖ࡋࠊ㟷Ⰽࡢࣁ
2 ḟࡢ࠸ࡎࢀࢆ㑅ᢥࡋࡲࡍࠋ ࣛࢺ⾲♧ࢆゎ㝖ࡋࡲࡍࠋḟࠊ࢝࢘ࣥ
•㹙⏕ / 㘓㡢㹛— ࢡࣜࢵࢡ㡢ࡣ⏕ ࢺ࢜ࣇ࣭࣎ࢱࣥࡢ㑅ᢥࢆゎ㝖ࡋࠊࣁࣛࢺ
㘓㡢⪺ࡇ࠼ࡲࡍ ⾲♧ࢆゎ㝖ࡋࡲࡍࠋ 㸦୧᧯సࡼࡾࠊࢡࣜ
•㹙㘓㡢ࡢࡳ㹛— ࢡࣜࢵࢡ㡢ࡣ㘓㡢ࡢࡳ⪺ ࢵࢡ࣭ࢺࣛࢵࢡࡀ࣑࣮ࣗࢺࡉࢀࠊ࢝࢘ࣥࢺ࣭
ࡇ࠼ࠊ⏕ ࢜ࣇࡀゎ㝖ࡉࢀࡲࡍࠋ㸧
ࡣ⪺ࡇ࠼ࡲࡏࢇ
•㹙࢝࢘ࣥࢺ࢜ࣇࡢ㛫ࡢࡳ㹛— ࢡࣜࢵࢡ㡢ࡣ ࢭࢵࢩࣙࣥࡢᢿᏊࢆタᐃࡍࡿ
㘓㡢๓ࡲࡓࡣ⏕㛤ጞ๓ࡢ࢝࢘ࣥࢺ࢜ࣇ ࢭࢵࢩࣙࣥࡢᢿᏊࡀࠊᴦ᭤ࡢᢿᏊྜࢃࡏ
ࡢ㛫ࡢࡳ⪺ࡇ࠼ࡲࡍ ࡚ṇࡋࡃタᐃࡉࢀ࡚࠸ࡿࡇࢆ☜ㄆࡋࡲ
ࡍࠋࢭࢵࢩࣙࣥࡢᢿᏊᴦ᭤ࡢᢿᏊࡀ୍⮴
ࡋ࡚࠸࡞࠸ࠊࢡࣜࢵࢡ㡢ࡢࢡࢭࣥࢺ
₇ዌࡀࡎࢀ࡚ࡋࡲ࠸ࠊ㘓㡢ෆᐜࡀ⦅㞟࢘
ࣥࢻ࢘ࡢᑠ⠇ᢿࡢࢢࣜࢵࢻᥞࢃ࡞ࡃ࡞
ࡾࡲࡍࠋ
1 ࢺࣛࣥࢫ࣏࣮ࢺ࣭࢘ࣥࢻ࢘ࡢ㹙⌧ᅾࡢ 1 ௨ୗࡢ࠸ࡎࢀࡢ᧯సࢆ⾜࠸ࡲࡍࠋ
ᢿᏊ㹛࣎ࢱࣥࢆࢲࣈࣝࢡࣜࢵࢡࡋࡲࡍࠋ • ⦅㞟࢘ࣥࢻ࢘ࡢࢯࣥࢢ࣭ࢫࢱ࣮ࢺ࣭࣐࣮
࣮࢝ࢆࢲࣈࣝࢡࣜࢵࢡࡋࡲࡍࠋ
• ࢸ࣏࣭࣮࣮ࣥࣝࣛࡢඛ㢌࠶ࡿࠊࢸ࣏ࣥ
ኚ᭦㏣ຍ࣎ࢱࣥ㸦 + 㸧ࢆࢡࣜࢵࢡࡋࡲࡍࠋ
㹙⌧ᅾࡢᢿᏊ㹛࣎ࢱࣥ ࢯࣥࢢ࣭ࢫࢱ࣮ࢺ࣭࣐࣮࣮࢝
2 ࢭ ࢵ ࢩ ࣙ ࣥ ࡢ ᢿᏊ ࢆ ධ ຊ ࡋࠊሙ ᡤ ࢆ
㹙 1|1|000 㹛タᐃࡋࡲࡍ㸦ࢹࣇ࢛ࣝࢺࡢᢿᏊ
ࢸ࣏࣭ࣥ
࣋ࣥࢺධࢀ᭰࠼ࡲࡍ㸧ࠋ
࣮࣮ࣝࣛ
ࢸ࣏ࣥኚ᭦ࢆ㏣ຍ࣎ࢱࣥ
ࢸ࣏࣭࣮࣮ࣥࣝࣛ
2 㹙ࢸ࣏ࣥࡢኚ᭦㹛ࢲࣟࢢ࡛ࠊࢭࢵࢩࣙ
ࣥࡢ BPM ್ࢆධຊࡋࡲࡍࠋ
㹙ᢿᏊࡢኚ᭦㹛࢘ࣥࢻ࢘
3㹙ࢡࣜࢵࢡ㹛 㸦Click㸧࣏ࢵࣉࢵࣉ࣓ࢽ࣮ࣗ
ࡽᢿࡢ್ࢆ㑅ᢥࡋࡲࡍࠋ 㸦ࡓ࠼ࡤࠊ6/8 ࡛
࠶ࢀࡤⅬ 4 ศ㡢➢ࢆ㑅ᢥࡋࡲࡍࠋ㸧
4 㹙OK㹛 ࢆࢡࣜࢵࢡࡋࠊ᪂ࡋ࠸ᢿᏊ࣋ࣥ
ࢺࢆᤄධࡋࡲࡍࠋ
㹙ࢸ࣏ࣥࡢኚ᭦㹛࢘ࣥࢻ࢘
ࢭࢵࢩࣙࣥࡢࢸ࣏ࣥࢆタᐃࡍࡿ
ࢸ࣏ࣥࢆᩘ್࡛ධຊࡍࡿࠊࢸ࣏ࣥ
ࢭࢵࢩࣙࣥࢆ᪂つసᡂࡍࡿࠊ 120BPM ࡢ ྜࢃࡏ࡚ T ࣮࢟ࢆᢲࡋ࡚ࢸ࣏ࣥࢆᣦᐃ
ࢹ ࣇ ࢛ ࣝ ࢺ࣭ࢸ ࣥ ࣏ ࡀ タ ᐃ ࡉ ࢀ ࡲ ࡍࠋ
ࡋࡲࡍࠋ
120BPM ௨እࡢࢸ࣏࡛ࣥࢡࣜࢵࢡ㡢ࢆ⏝
ࡋ࡚㘓㡢ࡍࡿሙྜࡣࠊࢸ࣏ࣥタᐃࢆኚ᭦ࡍ 㸦Location㸧ࢆ㹙1|1|000㹛タᐃࡋࡲ
3 㹙ሙᡤ㹛
ࡿᚲせࡀ࠶ࡾࡲࡍࠋ ࡍ㸦ࢹࣇ࢛ࣝࢺࡢࢸ࣏࣭ࣥ࣋ࣥࢺධࢀ
᭰࠼ࡲࡍ㸧ࠋ
4 㹙ࣞࢰ࣮ࣜࣗࢩࣙࣥ㹛 㸦Resolution㸧࣏ࢵࣉ
ࢵࣉ࣓ࢽ࣮ࣗࡽᢿࡢ್ࢆ㑅ᢥࡋࡲࡍࠋ 㸦ࡓ
࠼ࡤࠊ6/8 ࡛࠶ࢀࡤⅬ 4 ศ㡢➢ࢆ㑅ᢥࡋ
ࡲࡍࠋ㸧
ࢸ࣏ࣥࢆᡭື࡛タᐃࡍࡿࡣ㸸
࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺࡍࡿ
1 ࢺࣛࣥࢫ࣏࣮ࢺ࣭࢘ࣥࢻ࢘ MIDI ࢥࣥ
ࢺ࣮ࣟࣝࡀ⾲♧ࡉࢀ࡚࠸ࡿࡇࢆ☜ㄆࡋࡲࡍ 㡢ᴦไస࣮࣡ࢡࣇ࣮࡛ࣟࡣࠊ࣮࢜ࢹ࣭࢜
㸦㹙⾲♧㹛 㸦View㸧 > 㹙ࢺࣛࣥࢫ࣏࣮ࢺ㹛 ࣝ ࣮ ࣉ ࡸ ࢧ ࣥ ࣉ ࣭ࣝࣛ ࣈ ࣛ ࣜ ࣮ ࡢ ࢜ ࣮
㸦Transport㸧 > 㹙MIDI ࢥࣥࢺ࣮ࣟࣝ㹛
㸦MIDI ࢹ࢜ࡀ⏝ࡉࢀࡿࡇࡀ࠶ࡾࡲࡍࠋࡓ࠼
Controls㸧㸧ࠋ ࡤࠊࣞࢥ࣮ࢹࣥࢢ࡛ࡣࠊࢡࣜࢵࢡ࣭ࢺࣛࢵ
ࢡࡢ௦ࢃࡾࢻ࣒࣭࣮ࣛࣝࣉࢆ⏝ࡍࡿࡇ
2 ࢺࣛࣥࢫ࣏࣮ࢺ࡛ࠊࢥࣥࢲࢡࢱ࣮࣭࣎ࢱ ࡀ ࡛ ࡁ ࡲ ࡍࠋࡉ ࡲ ࡊ ࡲ ࡞ ࢯ ࣮ ࢫ ࡢ ࢜ ࣮
ࣥࢆࢡࣜࢵࢡࡋ࡚ࣁࣛࢺ⾲♧ࢆゎ㝖 ࢹ࣭࣮࢜ࣝࣉࠕ࣡ࣥࢩࣙࢵࢺࠖ ࣭ࢧࣥࣉ
ࡋࠊࢸ ࣥ ࣏࣭ࣝ ࣮ ࣛ ࣮ ࢆ ↓ ຠ ࡋ ࡲ ࡍࠋ ࣝࢆ⤌ࡳྜࢃࡏ࡚ࣞࣥࢪࡋࠊࡲࡗࡓࡃ᪂
Pro Tools ࡀ࣐ࢽ࣭ࣗࣝࢸ࣏࣭࣮ࣥࣔࢻ ࡋ࠸ᴦ᭤ࢆసᡂࡍࡿࡇࡶ࡛ࡁࡲࡍࠋ
ษࡾ᭰ࢃࡾࡲࡍࠋࡇࡢ࣮ࣔࢻ࡛ࡣࠊࢸ࣏࣭ࣥ
ࢺࣛࢵࢡࡢࢸ࣏࣭ࣥ࣋ࣥࢺࡀ࡚↓ຠ Pro Tools ࡛ࡣࠊ࠸ࡃࡘࡢ᪉ἲ࡛ࡉࡲࡊࡲ
࡞ࡾࡲࡍࠋ ࡞ࢯ࣮ࢫࡽࢭࢵࢩ࣮ࣙࣥ࢜ࢹ࣭࢜
ࣇࣝࢆ࣏࣮ࣥࢺࡍࡿࡇࡀ࡛ࡁࡲ
ࢸ࣏ࣥゎീᗘ ࡍࠋ㹙࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺ㹛ࢥ࣐ࣥࢻࢆ
⏝ࡍࡿࠊࡶࡋࡃࡣ࣮࣡ࢡࢫ࣮࣌ࢫ࣭ࣈࣛ
ࢸ࣏ࣥ
࢘ࢨ࣮ࠊFinder㸦 Mac 㸧ࡲࡓࡣ࢚ࢡࢫࣉ࣮ࣟ
ࢥࣥࢲࢡࢱ࣮࣭࣎ࢱࣥ ࣮ࣛ㸦 Windows 㸧ࡽ࣮࢜ࢹ࢜ࢆࢻࣛࢵ
ࢢ ࡋࠊࣁ ࣮ ࢻ ࢹ ࢫ ࢡࠊࢿ ࢵࢺ࣮࣡ࢡ࣭࣎
࣮࣒ࣜࣗࠊ࣮࢜ࢹ࢜ CDࠊ࣒࣮ࣜࣂࣈ࣭࣓ࣝ
࣐ࢽ࣭ࣗࣝࢸ࣏࣭࣮ࣥࣔࢻ
ࢹࡽ࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺࡍࡿࡇ
3 ࢸ ࣥ ࣏ ゎ ീ ᗘ ࢭ ࣞ ࢡ ࢱ ࣮ ࢆ ࢡ ࣜ ࢵ ࢡ ࡋࠊ ࡀ࡛ࡁࡲࡍࠋ
㡢౯ࢆ㑅ᢥࡋࡲࡍࠋ㸦ࡓ࠼ࡤࠊ 6/8 ᢿᏊ࡛
࠶ࢀࡤⅬ 4 ศ㡢➢ࠊ3/4 ᢿᏊ࡛࠶ࢀࡤ 4 ศ 㹙࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺ㹛ࢥ࣐ࣥࢻࢆ
㡢➢ࢆ㑅ᢥࡋࡲࡍࠋ㸧 ⏝ࡍࡿ
4 ᪂ࡋ࠸ࢸ࣏ࣥࢆධຊࡍࡿࡣࠊḟࡢ࠸ࡎ 㹙࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺ㹛ࢥ࣐ࣥࢻࢆ⏝
ࢀࢆ⾜࠸ࡲࡍࠋ ࡍࡿࠊ࣮࢜ࢹ࣭࢜ࣇࣝࡲࡓࡣࢡࣜࢵ
• ࢸ್࣏ࣥࢆࢡࣜࢵࢡࡋࠊᩘᏐࢆࢱࣉධ ࣉࢆ Pro Tools ࢭࢵࢩ࣏࣮ࣙࣥࣥࢺ࡛
ຊࡋ࡚ࡽ Enter ࢆᢲࡋࡲࡍࠋ ࡁࡲࡍࠋ
Pro Tools ࡛ ࡣࠊࢧ ࣥ ࣉ ࣝ ࣞ ࣮ ࢺ ࡀ ␗
࡞ࡿࣇࣝࢆࢭࢵࢩࣙࣥ㏣ຍ࡛ࡁ
ࡲࡍࠋ
㹙࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺ㹛ࢲ
ࣟࢢࡢࢥ࣓ࣥࢺ࣭ࣇ࣮ࣝࢻࠊࡇ
ࢀࡽࡢࣇࣝࡣኚࡋ࡞࠸㐺ษ
㹙࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺ㹛ࢲࣟࢢ ࡞㏿ᗘࣆࢵࢳ࡛⏕ࡉࢀࡿ࠸࠺ෆ
ᐜࡢ࣓ࢵࢭ࣮ࢪࡀ⾲♧ࡉࢀࡲࡍࠋ
3 㑅ᢥࡋࡓࣇࣝࡲࡓࡣࢡࣜࢵࣉࢆࣥ
࣏࣮ࢺ๓ࣉࣞࣅ࣮ࣗࡍࡿࡣࠊ㹙࣮࢜ࢹ 5 ࣮࢜ࢹ࣭࢜ࣇࣝࢡࣜࢵࣉࡍ࡚ࢆ
࢜ࢆ࣏࣮ࣥࢺ㹛ࢲࣟࢢࡢ⏕࣎ࢱࣥ ࣏࣮ࣥࢺ࣭ࣜࢫࢺຍ࠼ࡓࡽࠊ௨ୗࡢ࠸ࡎࢀ
ࢆࢡࣜࢵࢡࡋࡲࡍࠋṆ࣎ࢱࣥࢆᢲࡍࣉ ࡢ᪉ἲ࡛ࢧࣥࣉ࣮ࣝࣞࢺኚࢆ㐺⏝࡛ࡁ
ࣞࣅ࣮ࣗࡀṆࡋࡲࡍࠋࣉࣞࣅ࣮ࣗ㡢㔞ࡣ ࡲࡍࠋ
⦪ࢫࣛࢲ࣮࡛ㄪᩚ࡛ࡁࡲࡍࠋࣇࣝࡢ
•㹙ࢧࣥࣉ࣮ࣝࣞࢺኚࢆ㐺⏝㹛
㸦Apply SRC㸧
≉ᐃࡢሙᡤ⛣ືࡍࡿࡣࠊ⏕࣎ࢱࣥ
ࢆ࢜ࣥࡋࡲࡍࠋ
Ṇ࣎ࢱࣥࡢୗ࠶ࡿỈᖹࡢࢫࣛࢲ࣮ࢆ
⏝ࡋࡲࡍࠋ • ᩘᏐࢆࢱࣉධຊࡍࡿࠊ࣏ࢵࣉࢵࣉ
࣓ ࢽ ࣗ ࣮ ࡽࢧࣥࣉ࣮ࣝࣞࢺࢆ㑅ᢥࡋ࡚
㹙࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺ㹛ࢲࣟࢢ 㹙ࢯ ࣮ ࢫ ࡢ ࢧ ࣥ ࣉ ࣝ ࣞ ࣮ ࢺ㹛
㸦Source
ࡢࣉࣞࣅ࣮࣭࣮࣒ࣗ࣎ࣜࣗࡢࢥࣥࢺ࣮ࣟ Sample Rate㸧 ࢆᣦᐃࡋࡲࡍࠋ
ࣝࡣࠊࢡࣜࢵࣉ࣭ࣜࢫࢺࡢࢡࣜࢵࣉヨ
⫈࣮࣒࣎ࣜࣗࡶไᚚࡋࡲࡍࠋ
㹙࣮࢜ࢹ࣏࣮࢜ࣥࢺ࢜ࣉࢩࣙࣥ㹛ࢲࣟࢢ
᪂つࢺࣛࢵࢡ ྛ ࢜ ࣮ ࢹ ࣭࢜ࣇ ࣝ ࡣࠊ
ࣇࣝ⊂⮬ࡢࢺࣛࢵࢡ࠾ࡼࡧࢡࣜࢵࣉ࣭
ࣜࢫࢺ࣏࣮ࣥࢺࡉࢀࡲࡍࠋ
ࢡࣜࢵࣉ࣭ࣜࢫࢺ ࣮࢜ࢹ࣭࢜ࣇࣝࡣࠊࢡ
ࣜࢵࣉ࣭ࣜࢫࢺ࣏࣮ࣥࢺࡉࢀࡲࡍࠋ᪂
つࢺࣛࢵࢡࡣసᡂࡉࢀࡲࡏࢇࠋ࣏࣮ࣥࢺ
ࡉࢀࡓ࣮࢜ࢹ࣭࢜ࣇࣝࡣࢡࣜࢵࣉ࣭
ࣜࢫࢺ⾲♧ࡉࢀࠊ࣮࢜ࢹ࣭࢜ࢺࣛࢵࢡ
ࢻࣛࢵࢢࡍࡿࡇࡀ࡛ࡁࡲࡍࠋ
࣮࣡ࢡࢫ࣮࣌ࢫ
࣓ࢹࡲࡓࡣࢭࢵࢩ࣭ࣙࣥࣇࣝࢆ᪤
Ꮡࡢࢺࣛࢵࢡࡲࡓࡣࢺࣛࢵࢡ࣭ࣜࢫࢺࢻ
ࣛࢵࢢࡋ࡚᪂つࢺࣛࢵࢡࡋ࡚㏣ຍࡍࡿ
ࢡࣜࢵࣉ࣭ࣜࢫࢺࣇ
ࣝࢆࢻࣛࢵࢢࡋ࡚ࣥ
࣏࣮ࢺࡍࡿ
ࢻࣛࢵࢢࡋ࡚࣮࣡ࢡࢫ࣮࣌ࢫࡽ࣏࣮ࣥࢺࡍࡿ
᪂つࢺࣛࢵࢡࣇࣝࢆ࣏࣮ࣥࢺࡍࡿࡣ㸸
࢝࢘ࣥࢺ ࢯࣥࢢ࣭ Ἴᙧ㸦ᕥ࠾ࡼࡧ
1 ࣮࣡ࢡࢫ࣮࣌ࢫ࣭ࣈࣛ࢘ࢨ࣮ࠊMac Finderࠊ ࢜ࣇ ࢫࢱ࣮ࢺ ྑࢳࣕࣥࢿࣝ㸧
Windows ࢚ ࢡ ࢫ ࣉ ࣟ ࣮ ࣛ ࣮ ࡢ ࠸ ࡎ ࢀ ࡛ࠊ
࣏࣮ࣥࢺࡍࡿࣇࣝࢆ㑅ᢥࡋࡲࡍࠋ
ࡇࡢࢫࢸࣞ࢜Ἴᙧࡼࡾࠊ᭤ࡢࢭࢡࢩࣙࣥࢆ┠
2 ௨ୗࡢ࠸ࡎࢀࢆ⾜࠸ࡲࡍࠋ ど࡛☜ㄆࡍࡿࡇࡀ࡛ࡁࡲࡍࠋPro Tools ࡛ࡣࠊ
• ࣇࣝࢆ⦅㞟࢘ࣥࢻ࢘ࡢ௵ពࡢሙᡤ ࡇࡢࡼ࠺ࠕ㡢ࢆ┠࡛☜ㄆࠖࡍࡿࡇࡀ࡛ࡁࡿ
Shift- ࢻࣛ ࡓࡵࠊ᭤ࡢ㢌ࢆࢺ࣒ࣜࡋ࡚࢝࢘ࣥࢺ࢜ࣇࢆྲྀࡾ
ࢵࢢࡋࡲࡍࠋ 㝖ࡃࡇ࡞ࡀ⡆༢⾜࠼ࡲࡍࠋ
• ࢺࣛࢵࢡ࣭ࣜࢫࢺࣇࣝࢆࢻࣛࢵࢢ
ࡋࡲࡍࠋ
• ⦅㞟࢘ࣥࢻ࢘ࡢࠊࢺࣛࢵࢡࡢୗࡢ✵ࡁ
ࢫ࣮࣌ࢫࣇࣝࢆࢻࣛࢵࢢࡋࡲࡍࠋ
ࢯࣥࢢ࣭ࢫࢱ࣮ࢺ ⦅㞟ࢶ࣮ࣝ
3 ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆ⏝ࡍࡿሙྜࠊࢥࣆ࣮
& ࣮࣌ࢫࢺࡋࡓ࠸ࢡࣜࢵࣉࢆࢡࣜࢵࢡࡋࡲ
ࡍࠋࢭ ࣞ ࢡ ࢱ ࣮࣭ࢶ ࣮ ࣝ ࢆ ⏝ ࡍ ࡿ ሙ ྜࠊ
ࢥࣆ࣮ & ࣮࣌ࢫࢺࡋࡓ࠸ࢡࣜࢵࣉࢆࢲࣈࣝ
ࢡࣜࢵࢡࡋࡲࡍࠋ
2 ࢺࣛࢵࢡࡢ࢝࢘ࣥࢺ࢜ࣇ᭤ࡢጞࡲࡾࡢ㛫ࢆ
ࢡࣜࢵࢡࡋࡲࡍ㸦࣮࢝ࢯࣝࡀࢺ࣒࣭ࣜࢥ ࢫ࣐࣮ࢺ࣭ࢶ࣮࡛ࣝࡣࠊ⦅㞟࣮࢝ࢯ
ࣥኚࡋࡲࡍ㸧ࠋྑࢻࣛࢵࢢࡋ࡚ࢡࣜࢵ ࣝࢆࢡࣜࢵࣉࡢࡇࡊࡍᛂ
ࣉࡢඛ㢌ࢆෆྥࡁࢺ࣒ࣜࡋࠊᕥࢻࣛࢵࢢ ࡌ࡚ࠊ⦅㞟ࢶ࣮ࣝࡀษࡾ᭰ࢃࡾࡲࡍࠋ
ࡋ࡚እྥࡁࢺ࣒ࣜࡋࡲࡍࠋ
ࢺ࣒࣭ࣜࢶ࣮࡛ࣝᕥ᪉ྥࢻࣛࢵࢢࡋࠊࢡ
ࣜࢵࣉࡢࢺ࣒ࣜࢆྲྀࡾᾘࡍࡇࡶ࡛ࡁࡲࡍࠋ
ඖࡢ࣮࢜ࢹ࢜㸦࢝࢘ࣥࢺ࢜ࣇ㸧ࡀࡧ⾲♧
ࡉࢀࡲࡍࠋࡇࢀࡣࠊPro Tools ࡛ࡢ⦅㞟ࡀ㠀
◚ቯⓗ࡛࠶ࡿࡇࢆ♧ࡍ୍࡛ࡍࠋ
1 ࢻ࣒ࣛࡢ࣮࢜ࢹ࣭࣮࢜ࣝࣉࢆ Pro Tools
ࢭࢵࢩ࣏࣮ࣙࣥࣥࢺࡋࡲࡍ㸦 169 ࣮࣌
ࢪࡢࠕ࣮࢜ࢹ࢜ࢆ࣏࣮ࣥࢺࡍࡿࠖཧ↷㸧ࠋ
2 ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࡲࡓࡣࢭࣞࢡࢱ࣮࣭ࢶ࣮
ࣝ㸦⦅㞟࢘ࣥࢻ࢘ࡢࢶ࣮ࣝࣂ࣮࠶ࡾࡲ
ࡍ㸧ࢆࢡࣜࢵࢡࡋ࡚㑅ᢥࡋࡲࡍࠋ
1 ࢭࣞࢡࢱ࣮࣭ࢶ࣮࡛࣮ࣝ࢜ࢹ࣭࢜ࢡࣜࢵ
ࣉෆࡢ⦅㞟⠊ᅖࢆᣦᐃࡋࡲࡍࠋ
ูࡢࢺࣛࢵࢡࡢูࡢ㛫⨨ࢡࣜࢵࣉࢆ࣮࣌ࢫࢺ ⦅㞟⠊ᅖࢆ㑅ᢥࡍࡿ
ࡍࡿ
2㹙⦅㞟㹛 㹙ࢡࣜࢵࣉࢆศ㹛
㸦Edit㸧> 㸦Separate
Region㸧>㹙㑅ᢥ⠊ᅖ㹛㸦At Selection㸧ࢆ㑅ᢥ
⌧ᅾࡢ㑅ᢥ⠊ᅖࢆࢡࣜࢵࣉ࣮࣎ࢻࢥࣆ࣮
ࡋࡲࡍࠋ
ࡍࡿࡣࠊCommand+C㸦Mac㸧ࡲࡓࡣ Con-
trol+C㸦Windows㸧ࢆᢲࡋࡲࡍࠋࢡࣜࢵࣉ ⌧ᅾࡢ㑅ᢥ⠊ᅖ࡛ࢡࣜࢵࣉࢆศࡍࡿ
࣮࣎ࢻࡢෆᐜࢆ⌧ᅾࡢ⦅㞟⨨࣮࣌ ࡣࠊCommand+E㸦Mac㸧ࡲࡓࡣ Control+E
ࢫࢺࡍࡿࡣࠊCommand+V㸦 Mac 㸧ࡲ 㸦Windows㸧ࢆᢲࡋࡲࡍࠋ
ࡓ ࡣ Control+V 㸦 Windows 㸧ࢆ ᢲ ࡋ ࡲ
ࡍࠋ
ࢡࣜࢵࣉࢆศ࣭㓄⨨ࡍࡿ
Pro Tools ࡛ࡣࠊࡉࡲࡊࡲ࡞᪉ἲ࡛᪂つ࣮࢜ࢹ
࣭࢜ࢡࣜࢵࣉࢆసᡂ࡛ࡁࡲࡍࠋࡲࡎࡣ࣮࢜
ࢹ ࣭࢜ࣇ ࣝ ࢆ ࢡ ࣜ ࢵ ࣉ ࡋ ࡚ ࣥ
࣏࣮ࢺࡲࡓࡣ㘓㡢࡛ࡁࡲࡍࠋࡲࡓࠊࡇࡢࡼ
࠺࡞ࢡࣜࢵࣉࢆࢺ࣒ࣜ㸦 169 ࣮࣌ࢪࡢࠕ࣮࢜ 㑅ᢥ⠊ᅖቃ⏺࡛ࡢศࡼࡾసᡂࡉࢀࡓ᪂つࢡࣜࢵ
ࢹ࣭࢜ࢡࣜࢵࣉࢆࢺ࣒ࣜࡍࡿࠖ㸧ࡸศࡍ ࣉ
ࡿࡇ࡛ࠊ࣮࢜ࢹ࣭࢜ࣇࣝࡢ୍㒊ࢆ
ཧ↷ࡍࡿ࣮࢜ࢹ࣭࢜ࢡࣜࢵࣉࢆసᡂ࡛ࡁ
ࡲࡍࠋ
ḟࡢ࡛ࡣࠊࢭࢵࢩࣙࣥෆࡢ࣮࢜ࢹ࣭࢜
ࢡࣜࢵࣉࢆศ࣭㓄⨨ࡍࡿࡉࡲࡊࡲ࡞᪉
ἲࡘ࠸࡚ㄝ᫂ࡋࡲࡍࠋࡇࡢ࡛ࡣࠊࣥ
࣏࣮ࢺࡋࡓࢻ࣒ࣛࡢ࣮࢜ࢹ࣭࣮࢜ࣝࣉࢆ
⏝ࡋࡲࡍࠋ
⦅㞟࣮ࣔࢻ㸦ࢢࣜࢵࢻ࣭࣮ࣔࢻࡀ㑅ᢥࡉࢀ࡚࠸ࡿ≧ែ㸧
ࢡࣜࢵࣉࢆ㓄⨨ࡍࡿࡣࠊ௨ୗࡢ࠸ࡎࢀࢆ⾜࠸ࡲ
ࢺࣛࣥࢪ࢙ࣥࢺ࡛ศࡉࢀࠕࢩࣕࢵࣇࣝࠖࡉࢀࡓࣜࢬ
ࡍࠋ
࣒ࡢ࣮࢜ࢹ࣭࣮࢜ࣝࣉ
ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆࢫࣜࢵࣉ࣭࣮ࣔࢻ࡛
⏝ࡋ࡚࠸ࡿሙྜࠊ࣮࢜ࢹ࣭࢜ࢡࣜࢵࣉ
ࢆ᪂ࡋ࠸⨨ࢻࣛࢵࢢࡋࡲࡍࠋࢡࣜࢵࣉ
ࡣࡑࡢ⨨⛣ືࡋࡲࡍࠋ
1㹙ࢺࣛࢵࢡ㹛
㸦Track㸧> 㹙᪂つ㹛
㸦New㸧 ࢆ㑅ᢥࡋࡲࡍࠋ㹙᪂つࢺࣛࢵࢡ㹛㸦 New Track 㸧ࢲ
ࣟࢢ࡛௨ୗࢆ⾜࠸ࡲࡍࠋ
•㹙ࢫࢸࣞ࢜㹛㸦Stereo㸧ࢆ㑅ᢥࡋࡲࡍࠋ
•㹙࣮࢜ࢹ࢜ ࢺࣛࢵࢡ㹛(Audio Track㸧⾲♧ࡉࢀ࡚࠸ࡿ࣏ࢵࣉࢵࣉ࣭࣓ࢽ࣮ࣗࢆࢡࣜࢵ
ࢡࡋࠊ㹙ࣥࢫࢺ࣓ࣝࣥࢺ ࢺࣛࢵࢡ㹛
㸦Instrument Track㸧 ࢆ㑅ᢥࡋࡲࡍࠋ
•㹙సᡂ㹛㸦Create㸧 ࢆࢡࣜࢵࢡࡋࡲࡍࠋ
㹙᪂つࢺࣛࢵࢡ㹛ࢲࣟࢢ㸦㹙ࢫࢸࣞ࢜㹛㹙ࣥࢫࢺ࣓ࣝࣥࢺ ࢺࣛࢵࢡ㹛ࡀ㑅ᢥࡉࢀ࡚࠸ࡿ≧ែ㸧
2 ᚲせᛂࡌ࡚ࠊ㹙࢘ࣥࢻ࢘㹛
㸦Window㸧> 㹙࣑ࢵࢡࢫ㹛
㸦Mix㸧 ࢆ㑅ᢥࡋ࡚࣑ࢵࢡࢫ࣭࢘
ࣥࢻ࢘ࢆ⾲♧ࡉࡏࡲࡍࠋ
3 ࣥࢫࢺ࣓ࣝࣥࢺ࣭ࢺࣛࢵࢡࡢ୍␒ୖ㏆ࡃ࠶ࡿࢺࣛࢵࢡ࣭ࣥࢧ࣮ࢺ࣭ࢭࣞࢡࢱ࣮
ࢆࢡࣜࢵࢡࡋࠊࣥࢫࢺ࣓ࣝࣥࢺ࣭ࢧࣈ࣓ࢽ࣮ࣗࡽ 㹙Xpand2㹛 ࢆ㑅ᢥࡋࡲࡍࠋ
ࣥࢧ࣮
ࢺ࣭ࢭࣞ
ࢡࢱ࣮
2
4 ࣉࣛࢢ࣭ࣥ࢘ࣥࢻ࢘ࡀ⾲♧ࡉࢀࠊXpand! ࣉࣛࢢࣥࡀ⾲♧ࡉࢀࡲࡍࠋࡇࢀ࡛ࠊMIDI
ࢆࡗ࡚㬆ࡽࡍࢧ࢘ࣥࢻ࣭ࣉࣜࢭࢵࢺࢆ㑅ᢥ࡛ࡁࡲࡍࠋ
࣮࢝ࢯࣝࡢࣆࢵࢳ⨨
࣌ࣥࢩ࣭࣮ࣝ࢝ࢯࣝ
࣮࢝ࢯࣝࡢࢱ࣒ࣛࣥ⨨
ࣥࢫࢺ࣓ࣝࣥࢺ࣭ࢺࣛࢵࢡ࡛ࣀ࣮ࢺ࣭ࣅ࣮ࣗࢆ㑅
ᢥࡍࡿ
2 ࣌ࣥࢩ࣭ࣝࢶ࣮ࣝࢆ㑅ᢥࡋࠊ 㹙ࣇ࣮ࣜࣁࣥ
ࢻ㹛㸦 Free Hand㸧タᐃࡉࢀ࡚࠸ࡿࡇࢆ☜
ㄆࡋࡲࡍࠋࣀ࣮ࢺ࣭ࣅ࣮ࣗࡢ MIDI ࢺࣛࢵࢡࡲ
ࡓࡣࣥࢫࢺ࣓ࣝࣥࢺ࣭ࢺࣛࢵࢡࡢࣉࣞ
ࣜࢫࢺ࣐࢘ࢫ࣮࢜ࣂ࣮ࡍࡿࠊ࣮࢝ࢯࣝ
ࡀ࣌ࣥࢩ࣭ࣝࢶ࣮ࣝኚࡋࡲࡍࠋ
࣮࢝ࢯࣝࡢ⨨ࡑࡢ್
3 ᢿ 4 ศ㡢➢ࢆᤄධࡍࡿࡣࠊ௨ୗࢆ⾜࠸
ࡲࡍࠋ
• ࣓࣭ࣥࢱ࣒ࢫࢣ࣮ࣝࢆᑠ⠇ | ᢿタᐃ
ࡋࡲࡍࠋ
• ⦅㞟࣮ࣔࢻࢆࢢࣜࢵࢻ࣭࣮ࣔࢻࡋࡲࡍࠋ
• ࢢࣜࢵࢻ್ࢆ 4 ศ㡢➢ࡋࡲࡍࠋ
•㹙ࢹࣇ࢛ࣝࢺ ࣀ࣮ࢺ ࢹ࣮ࣗࣞࢩࣙࣥ㹛
㸦 Default Note Duration 㸧ࢆ 4 ศ㡢➢ࡲࡓ
㸦Follow Grid㸧 タ
ࡣ㹙ࢢࣜࢵࢻᚑ࠺㹛
ᐃࡋࡲࡍࠋ
ࢢࣜࢵࢻ࣭࣮ࣔࢻࡀ࢜ࣥࡢሙྜࠊࢹࣇ࢛
ࣝࢺ࡛ࡣࠊMIDI ࣀ࣮ࢺࡢ⤊⨨ࡣ
᭱ࡶ㏆࠸ࢢࣜࢵࢻቃ⏺ࢫࢼࢵࣉࡋ
࣌ࣥࢩ࣭ࣝࢶ࣮ࣝࢆࡗ࡚ᤄධࡉࢀࡓ MIDI ࣀ࣮ࢺ
ࡲࡍࠋ࣌ࣥࢩ࣭ࣝࢶ࣮࡛ࣝ Command-
ࢻࣛࢵࢢ㸦Mac㸧ࡲࡓࡣ Control- ࢻࣛࢵ
ࢢࣜࢵࢻ࣭࣮ࣔࢻࡀ࢜ࣥࡢሙྜࠊࢹࣇ࢛
ࢢ㸦 Windows 㸧ࡋࠊࢢࣜࢵࢻࡢࢫ
ࣝࢺ࡛ࡣࠊMIDI ࣀ࣮ࢺࡢ㛤ጞ⨨ࡣ
ࢼࢵࣉࢆ୍ⓗ↓ຠࡍࡿࡇࡀ
᭱ࡶ㏆࠸ࢢࣜࢵࢻቃ⏺ࢫࢼࢵࣉࡋ
࡛ࡁࡲࡍࠋ
ࡲࡍࠋ࣌ࣥࢩ࣭ࣝࢶ࣮ࣝࢆࣇ࣮ࣜࣁ
ࣥࢻ࡛⏝ࡍࡿሙྜࠊCommand ࣮࢟ MIDI ࣀ࣮ࢺࢆ⦅㞟ࡍࡿ
㸦 Mac 㸧ࡲ ࡓ ࡣ Control ࣮࢟
ࢫࢱ࣮ࢺ࠾ࡼࡧ࢚ࣥࢻ⨨ࠊࢹ࣮ࣗࣞࢩࣙ
㸦 Windows 㸧ࢆᢲࡋࡓࡲࡲࡍࡿࡇ
ࣥ㸦㛗ࡉ㸧ࠊ㡢㧗ࠊ࣋ࣟࢩࢸ࡞ࠊ MIDI
࡛ࠊࢢࣜࢵࢻࡢࢫࢼࢵࣉࢆ୍ⓗ ࣀ ࣮ ࢺ ࡣ ⦅ 㞟 ࢘ ࣥ ࢻ ࢘ ࡲ ࡓ ࡣ MIDI ࢚
↓ຠࡍࡿࡇࡀ࡛ࡁࡲࡍࠋ ࢹࢱ࣭࢘ࣥࢻ࡛࢘⦅㞟ࡍࡿࡇࡀ࡛ࡁ
ࡲࡍࠋࢭࣞࢡࢱ࣮ࠊࢢࣛࣂ࣮ࠊࢺ࣒ࣜࠊ࣌
ᤄධࡋࡓࣀ࣮ࢺࡢ࣋ࣟࢩࢸࡣࠊ㹙ࣀ࣮ࢺ ࣥࢩࣝࡢྛࢶ࣮ࣝࢆࡗ࡚ࠊಶࠎࡢࣀ࣮ࢺ
࢜ࣥ ࣋ࣟࢩࢸࡢࢹࣇ࢛ࣝࢺ್㹛タᐃࡼࡗ ࡣࡶࡕࢁࢇࠊ」ᩘࣀ࣮ࢺࢆࡲࡵ࡚᧯సࡍ
࡚Ỵࡲࡾࡲࡍࠋ㛗ࡉࡣࠊ㑅ᢥࡋࡓ㹙ࢹࣇ࢛ࣝ ࡿࡇࡶ࡛ࡁࡲࡍࠋ
ࢺ ࣀ࣮ࢺ ࢹ࣮ࣗࣞࢩࣙࣥ㹛࡛Ỵࡲࡾࡲࡍࠋ
ࢢࣜࢵࢻ࣭࣮ࣔࢻࡀ࢜ࣥࡢሙྜࠊࣀ࣮ࢺ࣭࢜ࣥ MIDI ࣀ࣮ࢺࢆ㑅ᢥࡍࡿ
ࡢ⨨ࡣࢢࣜࢵࢻࡢ༢ࡼࡗ࡚Ỵࡲࡾࡲ
ࡍࠋ MIDI ࣀ࣮ࢺࢆ⦅㞟ࡍࡿࡣࠊ๓ MIDI
ࣀ࣮ࢺࢆ㑅ᢥࡍࡿᚲせࡀ࠶ࡾࡲࡍࠋ
㹙⦅㞟୰ MIDI ࣀ࣮ࢺࢆ⏕㹛࢜ࣉࢩࣙࣥࡀ࢜
ࣥࡢሙྜࠊྛࣀ࣮ࢺࡀᤄධࡉࢀ࡚࠸ࡿ࠾ MIDI ࣀ࣮ࢺࢆ㑅ᢥࡍࡿࡣ㸸
ࡾ㬆ࡾࡲࡍࠋ
1 MIDI ࢺࣛࢵࢡࡲࡓࡣࣥࢫࢺ࣓ࣝࣥ
࣌ࣥࢩ࣭ࣝࢶ࣮࡛ࣝࢡࣜࢵࢡࡋ࡚ࡽ㸦ࣜ ࢺ࣭ࢺࣛࢵࢡࢆࣀ࣮ࢺ࣭ࣅ࣮ࣗタᐃࡋࡲ
࣮ࣜࢫࡏࡎ㸧ࢻࣛࢵࢢࡋࠊࣀ࣮ࢺࡢ㡢㧗 ࡍࠋ
ࡲࡓࡣ㛗ࡉࢆㄪᩚࡍࡿࡇࡀ࡛ࡁࡲࡍࠋྑ
᪉ྥࢻࣛࢵࢢࡍࡿࠊࣀ࣮ࢺࡢ㛤ጞ⨨ 2 ௨ୗࡢ࠸ࡎࢀࡢ᧯సࢆ⾜࠸ࡲࡍࠋ
࣌ࣥࢩ࣭ࣝࢶ࣮ࣝࡲࡓࡣࢢࣛࣂ࣮࣭ࢶ࣮
࡛ࣝࠊྛࣀ࣮ࢺࢆ Shift- ࢡࣜࢵࢡࡋࡲࡍࠋ
ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆࡗ࡚ࣀ࣮ࢺࢆ㑅ᢥࡍࡿ
ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆ⏝ࡍࡿ㝿ࠊ㛗᪉ᙧࡢ୍㒊
ࡀࣀ࣮ࢺ㸦ࣀ࣮ࢺࡢࢫࢱ࣮ࢺࡲࡓࡣ࢚ࣥࢻ
⨨㸧ゐࢀ࡚࠸ࡿࠊࡑࡢࣀ࣮ࢺࡣ㑅ᢥ⠊ᅖ
ྵࡲࢀࡲࡍࠋ ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆࡗ࡚ࢺࣛࣥࢫ࣏࣮ࢬࡍࡿ
ࣀ࣮ࢺࢆࢻࣛࢵࢢࡍࡿࠊ㡢⛬ࡀኚࢃࡿࡓ
ࡧࣀ࣮ࢺࡀ㬆ࡾࡲࡍࠋࡲࡓ࣮࢝ࢯࣝ⨨
ࣥࢪࢣ࣮ࢱ࣮㸦⦅㞟࢘ࣥࢻ࢘ෆ㸧ࡣࠊ
ࢺࣛࣥࢫ࣏࣮ࢬ㔞ࡀ᪉ྥ㸦㸩 / ࣮㸧ࢆྵࡵ༙
㡢༢࡛⾲♧ࡉࢀࡲࡍࠋ
ඖࡢࣀ࣮ࢺኚ᭦ࢆຍ࠼࡞࠸࡛ࢥ
ࣆ࣮ࡍࡿࡣࠊOption ࣮࢟㸦 Mac 㸧
ࡲࡓࡣ Alt ࣮࢟㸦 Windows 㸧ࢆᢲࡋ
࡞ࡀࡽࢻࣛࢵࢢࡋࡲࡍࠋ
ࢺ࣒࣭ࣜࢶ࣮ࣝࢆࡗ࡚ࣀ࣮ࢺࡢ⤊⨨ࢆኚ᭦ࡍࡿ
ࢢ ࣜ ࢵ ࢻ࣭ࣔ ࣮ ࢻ ࡛ ࡣࠊ Command
࢟ ࣮㸦 Mac 㸧ࡲ ࡓ ࡣ Control ࢟ ࣮
㸦Windows㸧ࢆࡗ࡚ࢢࣜࢵࢻ࣭࣮ࣔ ࣋ࣟࢩࢸ⥺ࢆࢻࣛࢵࢢࡍࡿ
ࢻࢆ୍ⓗ↓ຠࡍࡿࡇࡀ࡛ࡁ
ࡲࡍࠋ ࣌ࣥࢩ࣭ࣝࢶ࣮࡛ࣝࠊ」ᩘࡢࣀ࣮
ࢺࡢ࣋ࣟࢩࢸࢆ⦅㞟࡛ࡁࡲࡍࠋ
ࣀ࣮ࢺ࣭࣋ࣟࢩࢸࢆᡭື࡛⦅㞟ࡍࡿ
MIDI ࣀ࣮ࢺࢆ๐㝖ࡍࡿ
MIDI ࢺࣛࢵࢡࡲࡓࡣࣥࢫࢺ࣓ࣝࣥࢺ࣭
ࢺࣛࢵࢡࡀ࣋ࣟࢩࢸ࣭ࣅ࣮ࣗタᐃࡉࢀ ⦅㞟࣓ࢽ࣮ࣗࡢࢡ࣭ࣜࢥ࣐ࣥࢻࢆࡗ࡚
࡚࠸ࡿሙྜࠊࡲࡓࡣࢺࣛࢵࢡࡢୗ࣋ࣟࢩ 㑅ᢥࡉࢀ࡚࠸ࡿࣀ࣮ࢺࢆ๐㝖ࡍࡿࡔࡅ࡛࡞
ࢸ࣭࣮ࣞࣥࡀ⾲♧ࡉࢀ࡚࠸ࡿሙྜࠊྛࣀ࣮ ࡃࠊ࣌ࣥࢩ࣭ࣝࢶ࣮ࣝࢆࡗ࡚ಶࠎࡢࣀ࣮
ࢺࡢࢱࢵࢡ࣭࣋ࣟࢩࢸࡣᆶ┤ࡢ⥺࡛⾲ ࢺࢆ๐㝖ࡍࡿࡇࡶ࡛ࡁࡲࡍࠋ
♧ࡉࢀࡲࡍࠋ࣋ࣟࢩࢸ⥺ࡀ㧗࠸ࠊ࣋
ࣟࢩࢸ್ࡀ㧗ࡃ࡞ࡾࡲࡍ㸦 0-127 㸧ࠋ ࢡ࣭ࣜࢥ࣐ࣥࢻࢆࡗ࡚」ᩘࡢ MIDI ࣀ࣮ࢺࢆࡲ
ࡵ࡚๐㝖ࡍࡿࡣ㸸
⦅㞟࢘ࣥࢻ࡛࢘ MIDI ࣋ࣟࢩࢸࢆ⦅㞟ࡍࡿࡣ㸸
1 ๐㝖ࡍࡿࣀ࣮ࢺࢆ㑅ᢥࡋࡲࡍࠋ
1 ௨ୗࡢ࠸ࡎࢀࡢ᧯సࢆ⾜࠸ࡲࡍࠋ
2 ௨ୗࡢ࠸ࡎࢀࡢ᧯సࢆ⾜࠸ࡲࡍࠋ
• MIDI ࢺࣛࢵࢡࡲࡓࡣࣥࢫࢺ࣓ࣝࣥ
ࢺ࣭ࢺࣛࢵࢡࢆ࣋ࣟࢩࢸ࣭ࣅ࣮ࣗタ •㹙⦅㞟㹛
㸦Edit㸧> 㹙ࢡࣜ㹛
㸦Clear㸧ࢆ㑅ᢥ
ᐃࡋࡲࡍࠋ ࡋࠊ㑅ᢥࡉࢀ࡚࠸ࡿࣀ࣮ࢺࢆ๐㝖ࡋࡲࡍࠋ
ࡇࡢሙྜࡣࠊࢺࣛࢵࢡࡢࢥࣥࢺ࣮࣮࣭ࣟࣛ
• MIDI ࢺࣛࢵࢡࡲࡓࡣࣥࢫࢺ࣓ࣝࣥ ࢹ࣮ࢱࡣ๐㝖ࡉࢀࡲࡏࢇࠋ
ࢺ࣭ࢺࣛࢵࢡ⏝ࢥࣥࢺ࣮࣮࣭࣮ࣟࣛࣞࣥ
ࢆ⾲♧ࡋࠊ࣋ࣟࢩࢸࢆ⾲♧ࡋࡲࡍࠋ • ⦅㞟ࢶ࣮ࣝࡢ 1 ࡘ࡛ࠊ㑅ᢥࡋࡓࣀ࣮ࢺࢆྑࢡ
ࣜࢵࢡࡋࠊ
㹙ࢡࣜ㹛
㸦Clear㸧ࢆ㑅ᢥࡋࡲࡍࠋ
• Delete ࣮࢟㸦Mac㸧ࡲࡓࡣ Backspace ࣮࢟
㸦Windows㸧ࢆᢲࡋࡲࡍࠋ
2 ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆ㑅ᢥࡋࡲࡍࠋ
࣑࢟ࢩࣥࢢࢆ⾜࠺㝿ࠊࣜࣝࢱ࣒࣭ࣉࣛ
ࢢ ࣥ ࡸ ࣁ ࣮ ࢻ ࢘ ࢙ ࣭ ࣥ ࢧ ࣮ ࢺ ࡛ ࢚
࣌ࣥࢩ࣭ࣝࢶ࣮ࣝࢆࡗ࡚ࣀ࣮ࢺࢆ๐㝖ࡍࡿ ࣇ࢙ࢡࢺࡸಙྕฎ⌮ࢆࡋࡲࡍࠋPro Tools
ࡣࠊ㘓㡢ࡋࡓ࣮࢜ࢹ࢜ࡢຍᕤ⏝࡛
ࣉࣟࢢ࣒࣭ࣛࢳ࢙ࣥࢪ࠾ࡼࡧࢩࢫࢸ ࡁࡿ࣮࢜ࢹ࣭࢚࢜ࣇ࢙ࢡࢺ࣭ࣉࣛࢢࣥ
࣒࣭࢚ࢡࢫࢡ࣮ࣝࢩࣈࡶࠊ࣌ࣥࢩ࣭ࣝ ࡀᩘከࡃᒓࡋ࡚࠸ࡲࡍࠋࡇࡢࢭࢡࢩࣙࣥ
࡛ࡣࠊࣉࣛࢢࣥࢆ⏝ࡋ࡚ࢧ࢘ࣥࢻࢆຍ
ࢶ࣮࡛ࣝ Option- ࢡࣜࢵࢡ㸦 Mac 㸧ࡲ
ᕤࡍࡿ᪉ἲࢆ 2 ࡘࡢࢆ⏝࠸࡚ㄝ᫂ࡋࡲࡍࠋ
ࡓࡣ Alt- ࢡࣜࢵࢡ㸦 Windows 㸧ࡋ࡚
๐㝖࡛ࡁࡲࡍࠋ Pro Tools ᒓࡍࡿࡍ࡚ࡢࣉࣛࢢ
ࣥࡘ࠸࡚ヲࡋࡃࡣࠊ࣮ࠗ࢜ࢹ࣭࢜ࣉ
ࣛࢢ࣭ࣥ࢞ࢻ࠘ࢆ ࡈ ཧ ↷ ࡃ ࡔ ࡉ ࠸
㸦㹙࣊ࣝࣉ㹛> 㹙࣮࢜ࢹ࢜ ࣉࣛࢢࣥ
࢞ࢻ㹛㸧ࠋ
ࢥࣛࢮ࣮ࢩࣙࣥࢥࣥࣉࣞࢵࢩࣙ
ࣥࢆ㐺⏝ࡍࡿ
㏻ᖖࠊ࣮࢜ࢹ࢜ࡢ࣑࢟ࢩࣥࢢ࡛ࡣࠊࢺࣛࢵ
ࢡಶูࢥࣛࢮ࣮ࢩࣙࣥࢥࣥࣉ
ࣞࢵࢩࣙࣥࢆࡅࠊ࣮࢜ࢹ࢜ࡢ⪺ࡇ࠼ල
ྜࢆㄪᩚࡋࡲࡍࠋ
ࢥࣥࣉࣞࢵࢩࣙࣥ ࣮࢜ࢹ࢜ࡢࢲࢼ࣑ࢡࢫ
ࢆࢫ࣒࣮ࢬࡋࡲࡍࠋ⮬ື㡢㔞ࢥࣥࢺ࣮ࣟ
ࣝࡢࡼ࠺ᶵ⬟ࡋࠊ㡢㔞ࡢ㒊ศࡀࡁࡃ
࡞ࡾࡍࡂ࡞࠸ࡼ࠺ᢚ࠼ࡿࡇࡀ࡛ࡁࡲ
ࡍࠋࢥ ࣥ ࣉ ࣞ ࢵ ࢩ ࣙ ࣥ ࢆ ⏝ ࡍ ࡿ ࡇ ࡛ࠊ
࣮࣭࣎࢝ࣝࢧ࢘ࣥࢻࢆࡼࡾ๓㠃ฟࡋࡓࡾࠊࢩ
ࣥࣂࣝ࡞ࡢࢧ࢘ࣥࢻࡀ⏥㧗ࡃ࡞ࡾࡍࡂ࡞
࠸ࡼ࠺ࢥࣥࢺ࣮ࣟࣝࡍࡿࡇࡀ࡛ࡁࡲࡍࠋ
ࡉࡽ࣑ࣜࢵࢱ࣮ࢆ࠼ࡤࠊ࣮࢜ࢹ࢜ಙ
ྕࡢ࡞࡛ࠊࢫࣞࢵࢩࣙࣝࢻ㸦୍ᐃࡢ㡢㔞㸧
ࢆ㉸࠼ࡿࣆ࣮ࢡ㒊ศࡔࡅࢆᢚ࠼ࡿࡇࡶ࡛
ࡁࡲࡍࠋPro Tools ࡣࠊ✀㢮ࡢ␗࡞ࡿࢲࢼ
࣑ࢡࢫ࣭ࣉࣛࢢࣥࡀ࠸ࡃࡘᒓࡋ࡚࠸
ࡲࡍࠋ
࣑ࢵࢡࢫ࣭࢘ࣥࢻ࢘ࡢࢺࣛࢵࢡࡢࣥࢧ࣮ࢺ࣭ࢭࣞ
ࢡࢱ࣮
4 ࣉࣞࣂࢵࢡࢆ㛤ጞࡋࠊ࢚ࣇ࢙ࢡࢺࡢస⏝ࢆ
⪺ࡁࡲࡍࠋ
2 㹙ࢺࣛࢵࢡ㹛
㸦Track㸧> 㹙᪂つ㹛㸦New㸧 ࢆ㑅ᢥࡋࠊ 㹙 1 ࢫࢸࣞ࢜ AUX ධຊࢺࣛࢵࢡ㹛ࡀస
ᡂࡉࢀࡿࡼ࠺タᐃࡋࠊ㹙సᡂ㹛 㸦Create㸧 ࢆࢡࣜࢵࢡࡋࡲࡍࠋ
ࢺࣛࢵࢡ࣭ࣥࣉࢵࢺ࣭
ࢭࣞࢡࢱ࣮
ࢭࣥࢻ A ࢭࣞࢡࢱ࣮
7 ྛࢭࣥࢻ࣭࢘ࢺࣉࢵࢺ࣭࢘ࣥࢻ࢘ࢆ⏝ࡋ࡚ࠊࢯ࣮ࢫ࣭ࢺࣛࢵࢡࡽࡢࢭࣥࢻ࣭ࣞ࣋ࣝࢆㄪ
⠇࡛ࡁࡲࡍࠋࡲࡓࠊ≉ᐃࡢࢭࣥࢻࡢࢥࣥࢺ࣮ࣟࣝࡀ⾲♧ࡉࢀࡿࡼ࠺ࢭࣥࢻ࣭ࣅ࣮ࣗࢆタᐃࡍ
ࡿࡇࡶ࡛ࡁࡲࡍ㸦ࡓ࠼ࡤࠊ 㸦 View 㸧>㹙ࢭࣥࢻᣑᙇ⾲♧㹛
㹙⾲♧㹛 㸦 Expanded Sends 㸧>
㹙ࢭࣥࢻ A 㹛㸦 Send A㸧㸧ࠋ
8 ࢫ࣮࣌ࢫࣂ࣮ࢆᢲࡋࠊࢭࣥࢻ࣭࢘ࢺࣉࢵࢺ࣭࢘ࣥࢻ࢘ࡲࡓࡣࢭࣥࢻ࣭ࢺࣛࢵࢡ࣭ࢥ
ࣥࢺ࣮ࣟࣝࡢᑠࡉ࡞ࣇ࢙࣮ࢲ࣮ࢆࡺࡗࡃࡾୖࡆ࡚࠸ࡁࡲࡍࠋࡇࡢ᧯స࡛ࠊࣜࣂ࣮ࣈฎ⌮ࡢ
ࡓࡵ AUX ධຊ ࢺࣛࢵࢡ㏦ࡗ࡚࠸ࡿࢯ࣮ࢫ࣭ࢺࣛࢵࢡࡢ㔞ࢆㄪᩚࡋࡲࡍࠋ
9 ⏕㡢ࢆ⪥࡛☜ㄆࡋ࡞ࡀࡽྛࢺࣛࢵࢡࡢࢭࣥࢻ࣭ࣞ࣋ࣝࢆㄪᩚࡋࠊࣉࣛࢢࣥタᐃࢆኚ
᭦ࡋ࡚࣑ࢵࢡࢫ㐺ษ࡞ຠᯝࢆぢࡘࡅࡲࡍࠋ
࣮࢜ࢺ࣓࣮ࢩࣙࣥࢆグ㘓ࡍࡿ
᭩ࡁ㎸ࡳྍ⬟࡞ࢥࣥࢺ࣮ࣟࣝࢆࣉࣞࣂࢵ
ࣉࣞࣂࢵࢡ୰
ࢡ୰ືࡍࡇ࡛ࠊࢥࣥࢺ࣮ࣟࣝࡢ࣮࢜
࣮࣒࣭࣎ࣜࣗ
ࢺ࣓࣮ࢩࣙࣥࢆ᭩ࡁ㎸ࡴࡇࡀ࡛ࡁࡲࡍࠋ
ࣇ࢙࣮ࢲ࣮ࢆ⛣
ࢺࣛࢵࢡࡢ࣮࢜ࢺ࣓࣮ࢩࣙࣥࢆ᭩ࡁ㎸ࡴࡣ㸸 ືࡍࡿ
1㹙࢘ࣥࢻ࢘㹛 㸦Window㸧>㹙࣮࢜ࢺ࣓࣮
ࢩࣙࣥ㹛
㸦Automation㸧 ࢆ㑅ᢥࡋࡲࡍࠋ
2 ࣮࢜ࢺ࣓࣮ࢩ࣭ࣙࣥࢱࣉࡀ᭩ࡁ㎸ࡳྍ
⬟࡞ࡗ࡚࠸ࡿࡇࢆ☜ㄆࡋࡲࡍࠋ ࣮࢜ࢺ࣓࣮ࢩ࣭ࣙࣥ࢘ࣥࢻ࢘ࠊ࣮࣒࣭࣮࣎ࣜࣗ࢜ࢺ
࣓࣮ࢩ࣭ࣙࣥ࢜ࣥ
3 ࣑ࢵࢡࢫ࣭࢘ࣥࢻ࢘ࡲࡓࡣ⦅㞟࢘ࣥ
ࢻ࡚࢘ࠊ࣮࢜ࢺ࣓࣮ࢩࣙࣥࢆຍ࠼ࡓ࠸ྛ
ࢺࣛࢵࢡࡢ࣮࢜ࢺ࣓࣮ࢩ࣭࣮ࣙࣥࣔࢻ࣭ࢭࣞࢡ
ࢱ࣮ࢆࢡࣜࢵࢡࡋࠊ࣮࢜ࢺ࣓࣮ࢩ࣭࣮ࣙࣥࣔ
ࢻᣦᐃࡋࡲࡍࠋ᭱ึࡢ࣮࢜ࢺ࣓࣮ࢩ࣭ࣙࣥ
ࣃࢫࡣࠊ㹙 Write 㹛
㸦᭩ࡁ㎸ࡳ㸧࣮ࣔࢻࢆ㑅
ᢥࡋࡲࡍࠋ
4 ࣉࣞࣂࢵࢡࢆጞࡵ࡚࣮࢜ࢺ࣓࣮ࢩࣙࣥ
ࡢ᭩ࡁ㎸ࡳࢆ㛤ጞࡋࡲࡍࠋ
5 ࣮࢜ࢺ࣓࣮ࢩࣙࣥࢆ⾜࠺ࢥࣥࢺ࣮ࣟࣝ
㸦ࢺࣛࢵࢡࡢ࣮࣒࣭࣎ࣜࣗࣇ࢙࣮ࢲ࣮࡞㸧
ࢆືࡋࡲࡍࠋ
6 ࡋࡓࡽࠊࣉࣞࣂࢵࢡࢆṆࡋࡲࡍࠋ
࣮࢜ࢺ࣓࣮ࢩ࣭ࣙࣥࢹ࣮ࢱࡣࠊ⦅㞟ྍ⬟࡞
ࣈ࣮ࣞࢡ࣏ࣥࢺࡀ᭩ࡁ㎸ࡲࢀࡓ⥺ࢢࣛࣇ
ᙧᘧ࡞ࡗ࡚࠸ࡲࡍࠋ
࣮࢜ࢺ࣓࣮ࢩ࣭ࣙࣥࣈ࣮ࣞࢡ࣏ࣥࢺ
࣮࢜ࢺ࣓࣮
ࢩࣙ ࣭ࣥ
ࢱࣉ࣭
ࢭࣞࢡࢱ࣮
࣌ࣥࢩ࣭ࣝࢶ࣮࡛ࣝࣈ࣮ࣞࢡ࣏ࣥࢺࢆ๐㝖ࡍࡿ
࣮࢜ࢺ࣓࣮
ࢺ࣒࣭ࣜࢶ࣮ࣝࢆ⏝ࡍࡿ
ࢩ࣭ࣙࣥ
࣮ࣞࣥ ࢺ࣒࣭ࣜࢶ࣮ࣝࢆ࠺ࠊ㑅ᢥ⠊ᅖෆࡢ௵
ពࡢሙᡤࢆࢻࣛࢵࢢࡋ࡚㑅ᢥࡋࡓࡍ࡚ࡢ
࣮࣒࣭࣎ࣜࣗ ࣈ࣮ࣞࢡ࣏ࣥࢺࢆୖୗㄪᩚ࡛ࡁࡲࡍࠋ
࣮࢜ࢺ࣓࣮ࢩ࣭ࣙࣥ
ࢺࣛࢵࢡ࣭ࣅ࣮ࣗ
ࢺࣛࢵࢡ࣭ࣅ࣮࣮ࣗ࢜ࢺ࣓࣮ࢩ࣭࣮ࣙࣥࣞࣥ
ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆ⏝ࡍࡿ
ࢺ࣒࣭ࣜࢶ࣮ࣝࢆࡗ࡚ࣈ࣮ࣞࢡ࣏ࣥࢺࢆ⛣ືࡍࡿ
ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆࡗ࡚ࠊࢢࣛࣇ⥺ࢆࢡ
ࣜࢵࢡࡋ᪂つࣈ࣮ࣞࢡ࣏ࣥࢺࢆసᡂࡋࡓ
ࡾࠊ᪤Ꮡࡢࣈ࣮ࣞࢡ࣏ࣥࢺࢆࢻࣛࢵࢢࡋ
࡚ㄪᩚࡍࡿࡇࡀ࡛ࡁࡲࡍࠋࢢࣛࣂ࣮࣭ࢶ࣮
࡛ࣝࣈ࣮ࣞࢡ࣏ࣥࢺࢆ Option- ࢡࣜࢵࢡ
㸦Mac㸧ࡲࡓࡣ Alt- ࢡࣜࢵࢡ㸦Windows㸧ࡍࡿ
ࠊࣈ࣮ࣞࢡ࣏ࣥࢺࡀ๐㝖ࡉࢀࡲࡍࠋ
ࢢࣛࣂ࣮࣭ࢶ࣮ࣝࢆࡗ࡚ࣈ࣮ࣞࢡ࣏ࣥࢺࢆ᪂つస
ᡂࡍࡿ
ࢭࢵࢩࣙࣥࡢ࣑ࢵࢡࢫࢆࢫࢸࣞ࢜ࡢ࣮࢜ࢹ࣭࢜ࣇࣝࡋ࡚࢚ࢡࢫ࣏࣮ࢺࡍࡿࡣ㸸
1 ࢭࣞࢡࢱ࣮ࢆࡗ࡚ࢱ࣒ࣛࣥ㸦ࡲࡓࡣࢺࣛࢵࢡ㸧ࡢࢭࢵࢩࣙࣥࢭࢵࢩࣙࣥࡢ㑅ᢥࡋ
ࡲࡍࠋ
ࢭࣞࢡࢱ࣮࣭ࢶ࣮ࣝ
ࢱ࣒ࣛࣥ⨨
㑅ᢥࡉࢀࠊࢹࢫࢡ
ࣂ࢘ࣥࢫࡍࡿ‽ഛ
ࡀᩚࡗࡓࢭࢵࢩࣙࣥ
ࡢ࣮࢜ࢹ࢜
ࢹࢫࢡࣂ࢘ࣥࢫࡍࡿࢱ࣒ࣛࣥ⠊ᅖࢆ㑅ᢥࡍࡿ
Pro Tools ࡀࢹࢫࢡࡢࣂ࢘ࣥࢫࢆ㛤ጞ
ࡋࡲࡍࠋ
㹙࢜ࣇࣛࣥ㹛 㸦Offline㸧ࡀ㑅ᢥࡉࢀ࡚࠸࡞࠸
ሙྜࠊࣂ࢘ࣥࢫࡣࣜࣝࢱ࣒࡛⾜ࢃࢀࡿࡓ
ࡵࠊࣂ࢘ࣥࢫฎ⌮୰࣑ࢵࢡࢫࡢ࣮࢜ࢹ
࣭࢜ࣉࣞࣂࢵࢡࡀ⪺ࡇ࠼ࡲࡍࠋ 㸦ࣂ࢘ࣥࢫ
୰ࡣ Pro Tools ࡢࢥࣥࢺ࣮ࣟࣝࡣㄪᩚ࡛ࡁ
ࡲࡏࢇࠋ㸧
㹙ࣂ࢘ࣥࢫ㹛ࢲࣟࢢ
㸦 Bounce 㸧࢜ࣉࢩ࣭ࣙࣥࢲ
3 㹙ࣂ࢘ࣥࢫ㹛 ࣑ࢵࢡࢫࢆ CD ಖᏑࡍࡿ
ࣟࢢ࡛௨ୗࢆ⾜࠸ࡲࡍࠋ
ࣂ࢘ࣥࢫࡀࡍࡿࠊ࣮࢜ࢹ࣭࢜ࣇ
•㹙ࣂ࢘ࣥࢫࢯ࣮ࢫ㹛
㸦Bounce Source㸧࣑ࢵ ࣝࡀసᡂࡉࢀࡲࡍࠋࡇࡢࣇࣝࡽࠊ
ࢡࢫࡢ࣓࣭ࣥࢳࣕࣥࢿ࣭ࣝࣃࢫࢆ㑅ᢥࡋࡲ CD సᡂࢯࣇࢺ࢙࢘㸦 iTunes ࠊRoxio Toast
ࡍࠋ㸦㹙࣓ࣥ㸦ࢫࢸࣞ࢜㸧-> ࢼࣟࢢ 1-2㹛 ࡞㸧ࢆࡗ࡚ᶆ‽ⓗ࡞ CD ࣉ࣮࣮࡛ࣞࣖ
㸦main (Stereo) –> Analog 1–2㸧 ࡞㸧 ⏕࡛ࡁࡿ࣮࢜ࢹ࢜ CD ࢆసᡂ࡛ࡁࡲࡍࠋ
•㹙ࣇࣝࢱࣉ㹛㸦File Type㸧ࢆ㑅ᢥࡋࡲ ࢫࢱࢪ࢜௨እࡢ⎔ቃ࡛ࣜࣇࣞࣥࢫ CD ࢆ
ࡍࠋ
㸦㹙WAV㹛 ࡞㸧 ⫈ࡃࡇ࡛ࠊ⏕ࢩࢫࢸ࣒ࡸ⏕⎔ቃࡢ㐪
•㹙ࣇ࢛࣮࣐ࢵࢺ㹛
㸦Format㸧㹙ࣥࢱ࣮࣮ࣜ ࠸ࡼࡿ࣑ࢵࢡࢫࡢ⪺ࡇ࠼᪉ࡢኚࢆ☜ㄆ
ࣈ㹛
㸦Interleaved㸧 ࢆ㑅ᢥࡋࡲࡍࠋ ࡍࡿࡇࡀ࡛ࡁࡲࡍࠋ
• ࣂ࢘ࣥࢫࡋࡓ࣮࢜ࢹ࣭࢜ࣇࣝࢆ CD
ಖᏑࡍࡿࡘࡶࡾࡢሙྜࠊ
㹙ࣅࢵࢺࢹࣉࢫ㹛
㸦Bit Depth㸧
㹙16 ࣅࢵࢺ㹛 㸦16 Bit㸧 ࢆ㑅ᢥࡋࡲࡍࠋ
• ࣂ࢘ࣥࢫࡋࡓ࣮࢜ࢹ࣭࢜ࣇࣝࢆ CD
ಖᏑࡍࡿሙྜࠊ 㹙ࣅࢵࢺࢹࣉࢫ㹛 㸦Bit Depth㸧
ࡣ㹙44.1 ࣅࢵࢺ㹛㸦16 Bit㸧ࢆ㑅ᢥࡋࡲࡍࠋ
• ࣜࣝࢱ࣒ࡼࡾࡶ㏿࠸ࣂ࢘ࣥࢫࢆ⾜࠺
ࡣࠊ 㸦Offline㸧࢜ࣉࢩࣙࣥ
㹙࢜ࣇࣛࣥ㹛
ࢆ㑅ᢥࡋࡲࡍࠋ
㕠ᱧ䴠䛼
ͨ䴠䛼
1/4 㠞ᄥ㕠ᱧႁ
Mbox ݺ䲏Წ⮱䔋ᣒऐ̻ᣔݣ㷲㒛
Mbox ऻ䲏Წ⮱យฝகᣒऐ
2 ड़ߕ Pro Toolsȡ
ጒڤᴼ
䴠䒕
“ ⑁ጒ⼸ ” ᭜ጟ㏼䓴㑃ᢿȠ㑃䒾হ⌤䴠ั⤳⮱䶦Ⱋ
Ҹȡᗕᬍ䰭䔁ఋ “ ⑁ጒ⼸ ” ᴒⰸ᱙ᠴࢄ䔝⮱ڣ
Ⴐڲღ喑ѳౕγ㼐 Pro Tools ᰡ็ߌ㘪ऻ喑ᗕज㘪
чጹ᱈⁎ںᴒ䬲ȡ
ᴒⰸ Edit 喍㑃䒾喎⿄ऐ
᭫㑃䒾⿄ऐ喟
᭫㑃䒾⿄ऐ͚ᰶ⮱㻳ఫ䔶䶦喟
ӊ⁎䔶᠖ View > Edit Window > All 喍㻳ఫ > 㑃䒾⿄ऐ > ڕ䘕喎ȡ
Edit 喍㑃䒾喎⿄ऐ
᭫⌤䴠⿄ऐ喟
᭫⌤䴠⿄ऐ͚ᰶ⮱㻳ఫ䔶䶦喟
䔶᠖ View > Mix Window > All喍㻳ఫ > ⌤䴠⿄ऐ > ڕ䘕喎ȡ
• 䔶᠖ File > New Session 喍᪴У > ᐧጒ⼸喎ȡ㠒ᒀ • 㠒Ҭ⩕ͽக喑䄤Ҭ⩕ 1/4 㠞ᄥ⩢㐳ᄳڣ䔋ᣒ ݝMbox
ݺᰶកᐭ⮱ጒ⼸喑݆㈨㐌ᄳԊႅևᰡᩦȡౕ ̷⮱ DI 䓀ڒȡ
New Session 喍ᐧጒ⼸喎ᄦ䄊ᵳ͚喑䔶᠖ Create 2 ប㵹В̸᧺҉̭喟
Blank Session 喍݈ᐧ⾧⮪ጒ⼸喎Ꭳࢂ ܨOK 喍Ⴧ喎ȡ
• 㠒Ҭ⩕ Mbox喑䄤Ԋጟ䦵ᄦݺ䲏Წᝃऻ䲏Წ䔋ᣒₐ
3 ౕ Save 喍Ԋႅ喎ᄦ䄊ᵳ͚喑পऺ䄒ጒ⼸喑䔶᠖䔯ᒀ⮱ 䃫㒛 Front/Rear 喍 ݺ/ ऻ喎ᐭڠȡ
ԊႅѺ㒛喑♣ऻࢂ ܨSave 喍Ԋႅ喎ȡ
• 㠒Ҭ⩕ Mbox Mini喑䄤ᵦᢛ⩕⮱䓀ڒᐼ喑Ԋ
䔆ᵤ喑ᗕᅞ݈ᐧγ̭̺͗क़䴠䒕⮱ጒ⼸ȡ̸̭ₒ喑ᗕ Line/DI喍㏬ ڲ/DI喎ᐭڠᝃ Mic/Line喍叓 ䷻ٸ/ ㏬ڲ喎
ᄳ䔋ᣒ̭͗叓䷻ٸᝃͽக⩢㐳Ꭳ݈ᐧ⮱ᒂ䴠䒕䖀ȡ ᐭڠ䦵ᄦڤҀ䔋ᣒㆨಸₐ䃫㒛ȡ
䄤Ҭ⩕ XLR ⩢㐳ᄳ叓䷻ٸ䔋ᣒ ݝMbox ऻ䲏Წ̷ Mic/Line 喍叓 ䷻ٸ/ ㏬ڲ喎䓀 ڒ1
݈ᐧࢂฝ䖀䴠䒕
ᄳ⑁ᒂݣ㜠䴠䒕
㠒ጹ᱈̭⁎ᒂ͗͑ݣ䓀ڒ喑䄤݈ᐧ̭͗⿸Ҁฝ䴠䒕ᝃ͑
͗ࢂฝ䖀䴠䒕喑ڤҀः۠λᗕͽ⮱ڒகᝃฝ⎽হ䃎
ᒂݣ䴠䒕喟
ܿᒂڲ⮱ݣღ喟
• 㠒㺮ᒂ̺͗͑ݣह⮱ฝ⎽ 喍Ҹຯฝͽ叓䷻ٸহ⩢ၽश 1 ࢂܨ䴠䒕̷⮱ Record Enable 喍ड़⩕ᒂ䴠喎ᠶ䧛喑
Ѓ喎喑䄤݈ᐧ 2 ͗ࢂฝ䖀䴠䒕ȡ䔆ᵤᗕᅞजВहᬣᒂ ड़⩕䴠䒕۳ิᒂ䴠ȡᠶ䧛䬗◮㏏ٶȡ
͗͑ݣ䓀ڒԎतȡᒂݣ㐀ऻ喑जВᄦ䔆ψڲღܳݘ
䔈㵹㑃䒾Ƞั⤳হᎠ㶎ȡ
“ ड़⩕ᒂ䴠 ” ᠶ䧛
• 㠒㺮ᒂࣹݣ䕇䖀⿸Ҁฝฝ⎽喍Ҹຯ⿸Ҁฝ䩛Ⰵ喎喑䄤݈
ᐧ 1 ͗⿸Ҁฝ䴠䒕ȡ
ౕ Mix 喍⌤䴠喎⿄ऐ͚Ҭ䴠䒕ัλᒂ䴠ड़⩕⟣ᔮ
2 ᄦⱭ叓䷻ٸਫ਼⁹ᝃ᧚ᩫ喑ᝃ⑁ͽகȡ
ౕߍ䴠䶾ᣒऐ̷⮱䓀ڒ⯷⮱हᬣ㻯ᄌ Pro Tools 䴠䒕
⮱䴠䶾⩢ᎠѺ㒛ȡ喍䄤∕ᘼ喑⼨ߕᅼᎂ̷⮱ᣕၽ̺чᄦ䓀
⩢ڒᎠϔ⩌Ш҂ᒞ৺喑Ⴐग⩕λ䄰᪡⯾ख़⩢Ꭰȡ喎
ఋݝ䊤◦ ᧚ᩫ ᒂݣ
• 㠒䴠䒕⩢Ꭰ᭫㏏㞟喑݆㶕⯷䓴倅喑䰭㺮䭺ѻ䓀
ڒ⯷ȡ
• 㠒ͻ܍ᒵᄾⰸݝ䴠䒕㶕᭫㐬㞟喑݆㶕⯷䓴ѻ喠
ₑᬣ喑䄤倅䓀ڒ⯷ȡ
7 ̭ ܴ ᅞ 㐗 Ꭳ ۳ ิ ᐭ ᒂ 䴠 ᬣ喑䄤 ᠶ ⾧ ᵩ 䩛 ᝃ ࢂ ܨ
Transport 喍䊝ፓᣔݣ喎͚⮱ Play 喍᧚ᩫ喎ᠶ䧛ȡᒂ
䴠䓴⼸͚喑Transport喍䊝ፓᣔݣ喎⮱ Record喍ᒂݣ喎
ᠶ䧛হ䴠䒕̷⮱ Record Enable 喍ड़⩕ᒂ䴠喎ᠶ䧛
чअ㏜㏏㞟ȡ
8 㠒㺮։ᒂ䴠喑䄤⁎ںᠶ⾧ᵩ䩛ᝃࢂ ܨTransport
喍䊝ፓᣔݣ喎͚⮱ Stop 喍։喎ᠶ䧛ȡ喍Transport
喍䊝ፓᣔݣ喎⮱ Record 喍ᒂݣ喎ᠶ䧛чᐭ喑㔹䴠
䒕̷⮱ Record Enable 喍ड़⩕ᒂ䴠喎ᠶ䧛чԊᠮड़⩕
⟣ᔮᎣ䬗◮㏏ٶ喑ⰡݝᗕࢂܨႰͧȡ喎
ᗕጟᒂݣγ㜗ጞ⮱仃⃢䴠䒕ȡ
䴠䒕⩢Ꭰ
ᒂࢂ⮱ऻݣฝ䖀䴠䒕
ͨ䃎க
㑾ᵩ ᐼ
ᬣ䬡ധ۳ᴴᅧ
ᬣ䬡䒡
Pro Tools ͚⮱ Timeline 喍ᬣ䬡䒡喎হ Main Counter 喍ͨ䃎க喎喍Main Time Scale 喍ͨᬣ䬡ݨᏓ喎䃫㒛ͧ Minutes and
Seconds 喍ܳহ喎喎
䕌Ꮣ
ᄳͨᬣ䬡ݨᏓ䃫㒛ͧᄼ㞯 | 㞯 “ 䶱ิ ” ᠶ䧛
“ 㞯க ” ᠶ䧛
“ ᠴᡒ ” ᠶ䧛
3 ࢂ ܨOK 喍Ⴧ喎ȡ
㠒㺮Ҭ㞯க䴠䒕䲆䴠喑䄤ប㵹В̸᧺҉̭喟
Meter Change 喍तअࡃ喎⿄ऐ
ࢂ“ ܨ㞯க ”䴠䒕⮱ “䴠䒕ᣔУ ”ᣔУ͚⮱ M喍䲆䴠喎
3 ϻ Click 喍㞯க喎 ᑦܧ㤉ࢂ͚䔶᠖㞯⮱䴠こթȡ
ᠶ䧛Ҭ “ 㞯க ” 䴠䒕䲆䴠ȡ
喍Ҹຯ喑㠒䛴⩕ 6/8 喑݆䔶᠖こ◦ 4 ܳ䴠こ喎ȡ
ౕ Transport 喍䊝ፓᣔݣ喎⿄ऐ͚喑ः⊵䔶᠖ 4 ࢂ ܨOK 喍Ⴧ喎Вڒ⮱㞯θУȡ
Metronome 喍㞯க喎ᠶ䧛喑ҬႰ̺ںВ㨊㞟倅ϛ
᭫ȡ♣ऻः⊵䔶᠖ Count Off 喍䶱ิ喎ᠶ䧛喑Ҭ
Ⴐ̺ں倅ϛ᭫ȡ喍䔆͑͗᧺҉㘪์Ҭ㞯க䴠䒕䲆
䴠Ꭳ⺮⩕䶱ิ喎
“ 䕌Ꮣ ” ᴴᅧ 䕌ᏓᏓ
䕌Ꮣ
ᠴᡒ ᠶ䧛
ߍ䕌Ꮣअࡃ ᠶ䧛
ߕ䕌Ꮣ ᐼ
“ 䕌Ꮣ ” ᴴᅧ
3 ࢂ ܨTempo Resolution喍䕌ᏓᏓ喎䔶᠖கᎣ䔶᠖
2 ౕ Tempo Change 喍䕌Ꮣअࡃ喎ᄦ䄊ᵳ͚喑䓀ڒ䄒 ̭͗䴠こթȡ喍Ҹຯ喑㠒䛴⩕ 6/8 喑݆䔶᠖こ◦ 4
ጒ⼸⮱ BPM թȡ ܳ䴠こ喠㠒䛴⩕ 3/4 喑݆䔶᠖ 4 ܳ䴠こȡ喎
4 㠒㺮䓀ڒ䕌Ꮣ喑䄤ប㵹В̸᧺҉̭喟
• ࢂܨ䕌Ꮣթ喑䩛̭͗ڒ⮱ႄ喑♣ऻᠶ Enterȡ
• ࢂܨ䕌ᏓթᎣ̷̸᠃ߕ喑Вᰡᩦ䃫㒛ȡ㠒㺮䄰喑䄤ౕ
ᠶѼ Command (Mac) ᝃ Ctrl (Windows) ⮱हᬣ
᠃ߕ⏾ᱳȡ
• ࢂ ܨTempo 喍䕌Ꮣ喎թ喑♣ऻВ᱈⮱䕌Ꮣᠶ̸䃎ツ
ᱧ䩛Ⰵ̷⮱ “T” 䩛喑В䃫ჇⰥᏁ⮱թȡ
जВ䓀➦ڒჇ䕌Ꮣ喑ᝃजВҬ⩕ T 䩛В◦ܨᐼ
䃫㒛䕌Ꮣȡ
4 ϻ Resolution喍Ꮣ喎ᑦܧ㤉ࢂ͚䔶᠖㞯⮱䴠こթȡ
喍Ҹຯ喑㠒䛴⩕ 6/8 喑݆䔶᠖こ◦ 4 ܳ䴠こȡ喎
5 ࢂ ܨOK 喍Ⴧ喎ȡ
1 ӊ⁎䔶᠖ File > Import > Audio喍᪴У > ᄩ > ڒ䴠䶾喎ȡ Pro Tools 䔅जВᄳ᪴У⌨ߍݝ䛴ᵤ⢴̺ह⮱
2 ౕ Import Audio 喍ᄩڒ䴠䶾喎ᄦ䄊ᵳ͚喑ឫݝᎣ䔶 ጒ⼸ȡౕ Import Audio 喍ᄩڒ䴠䶾喎ᄦ䄊ᵳ⮱
᠖䴠䶾᪴УВ᭫ڣᆋᕔহڠ㖁❴⃢ȡ “ ∕䛷 ” ႄ⃢͚ч᭫䂓ॷԎᖜ喑㠒̺䒙ᢏ䔆
ψ᪴У喑݆᧚ڣᩫ䕌Ꮣহ䴠倅ч̺ₐȡ
5 ᗕౕᄳڕ䘕䴠䶾᪴Уহ❴⃢⌨ߍݝᄩ݄ڒ㶕ऻ喑जВប
㵹В̸᧺҉ᲒᏁ⩕䛴ᵤ⢴䒙ᢏߌ㘪喟
• ड़⩕ Apply SRC 喍Ꮑ⩕ 䛴ᵤ⢴䒙ᢏ 喍SRC喎喎ȡ
• 䕇 䓴 䩛 ڒ ႄ ᝃ ϻ ᑦ ܧ㤉 ࢂ ͚ 䔶 ᠖ 䛴 ⩕ ⢴喑ᠴ Ⴧ
Source Sample Rate 喍⎽䛴ᵤ⢴喎ȡ
• ϻ Quality 喍䉕䛼喎ᑦܧ㤉ࢂ͚䔶᠖䛴ᵤ⢴䒙ᢏ䉕䛼ȡ
ₑ䃫㒛ᄳᩦ ۆProcessing 喍ั⤳喎仃 䔶䶦䶢 ͚⮱
Sample Rate Conversion Quality喍䛴⩕⢴䒙ᢏ䉕䛼喎
䃫㒛ȡ
6 ࢂ ܨDone 喍Ⴙ喎ȡ
7 ฺౕݣᝃ䒙ᢏ᪴Уᬣ喑䄤ͧ᪴У䔶᠖व䔯⮱Ԋႅ
Ѻ㒛喑Ҹຯ⩕λᒀݺጒ⼸⮱ Audio Files 喍䴠䶾᪴У喎
Import Audio 喍ᄩڒ䴠䶾喎ᄦ䄊ᵳ ᪴Уȡౕ⌨ߍ᪴Уᬣ喑ₑ᪴Учϻ࣌ڣѺ㒛ᑂ⩕ȡ
“ 䴠䶾ᄩڒ䔶䶦 ” ᄦ䄊ᵳ
䴠䒕 ͗䴠䶾᪴Уᄩڣڒऱ㜗⮱䴠䒕হ❴⃢݄㶕͚ȡ
❴⃢݄㶕 䴠䶾᪴Уౕ̺݈ᐧ䴠䒕⮱ᗲ̸ۢᄩ⃢❴ڒ
݄㶕ȡᄩ⮱ڒ䴠䶾᪴Уᄳౕ᭫❴⃢݄㶕͚喑䮼ऻ䔅ज
В᠃ݝ䴠䶾䒕͚ȡ
9 㠒䔶᠖݈ᐧ䴠䒕喑䄤ౕ䴠䒕͚ͧᄩ⮱ڒ᪴У䔶᠖̭
͗Ѻ㒛喟
ጒ⼸䊤◦ ᄳ᪴Уᝃ❴⃢ᩫౕጒ⼸⮱䊤Ѻ㒛ȡ
⁹ᰟ䊤◦ ᄳ᪴Уᝃ❴⃢⮱ᐭ◦ᄦ命ݝᰟⰛ䊤ᴴ䃝◦ȡ
䔶ࡧ ᄳ᪴Уᝃ❴⃢⮱ᐭั̻㑃䒾ٶᴴᝃᬣ䬡䒡͚䔶
ࡧ⮱ᐭัᄦ命ȡ
Ⴧ◦ ᭫ Spot 喍Ⴧ◦喎ᄦ䄊ᵳ喑ᗕजᵦᢛШ҂ज⩕⮱
ᬣ䬡ᴴᅧᄳ᪴Уᝃ❴⃢Ⴧ◦ݝڒѺ㒛ȡ
10 ࢂ ܨOK 喍Ⴧ喎ȡ
ጒ҉ࡧ
ᄳ྿Ҁᝃጒ⼸᪴У᠃ᩫݝ⣝ᰶ䴠䒕͚喑
ᝃ҉ͧ䴠䒕᠃ᩫ ݝTrack List
喍䒕䖀݄㶕喎͚
ᄳ ᪴ У ᠃ ߕ ݝClip List
喍❴⃢݄㶕喎͚ВӬᄩڒ
䕇䓴᠃ᩫϻጒ҉ࡧᄩڒ
̷ఫͫҸ䄡ᬻγВ᠃ᩫᐼϻ Workspace喍ጒ҉ࡧ喎≼
㻵க͚ᄩڒ᪴Уᬣ⮱ψज⩕䔶䶦ȡ
2 ᄳ䔶Ⴧ⮱᪴У᠃݄⃢❴ڒ㶕͚ȡ
ԛ᪡䴠䶾❴⃢
ᄳ᪴Уᄩݝڒ⣝ᰶ䒕䖀͚喟 В̸Ҹϸ㏺ຯ҂䕇䓴キࢂ㑃䒾Გᩦअ⁹ᰟ⮱ᐭѺ㒛ȡ
ౕ᱙Ҹ͚喑जВख़ݝ呀ౕ⁹ᰟᐭ “ ݺ䶱្ၽ ”
1 ౕ Workspace 喍ጒ҉ࡧ喎≼㻵கȠ Mac Finder ᝃ
(“1...2...1.2.3...”) 喍մჇ䔆̭⿸Ҁฝ䒕䖀᭜䕇䓴᳣ၽ呀
Windows Explorer ͚䔶᠖㺮ᄩ⮱ڒ᪴Уȡ ̷⮱叓䷻ٸᒂ⮱ݣ喎 ȡВ̸ͧ䔆⃢䴠䶾ౕ Pro Tools
2 ᄳ䔶Ⴧ᪴У᠃کݝღ䒕䖀̷⮱͗Ѻ㒛ȡ ͚⮱㻳㻶᩵ȡ
ᄳ᪴Уᄩͧڒ䒕䖀喟
⁹ᰟ䊤◦
2 ౕ䶱ิऻহ⁹ᰟᐭܨࢂݺ䒕䖀喍ᗕчⰸٶݝᴴ᭫
ͧ “ ԛ᪡ ” ఫᴴ喎ȡाठ᠃ߕВᄳ❴⮱䊤Ѻ㒛ा
ڲԛ᪡喑ᝃाጓ᠃ߕВᄳ❴⮱䊤Ѻ㒛ाใԛ᪡ȡ Ҭ⩕ Grabber 喍ៀःக喎ጒڤ䔶᠖❴⃢
ฺݣহ㇅䉡̭͗❴⃢喟
“ 䔶᠖க ” ጒڤ
ᄳ❴⃢㇅䉡̺ݝह䒕䖀⮱̺हᬣ䬡Ѻ㒛
“ ៀःக ” ጒڤ
݈ᐧ̭͗㑃䒾䔶ࡧ 㠒㺮䛺㑃ᢿ❴⃢喑䄤ប㵹В̸᧺҉̭喟
2 䔶᠖ Edit > Separate Clip > At Selection 喍㑃䒾 > ౕ Slip喍⏾ߕ喎ᐼ̸Ҭ⩕ Grabber喍ៀःக喎ጒڤ喑
ܳ⃢❴ޟ > ౕ䔶ࡧ喎ȡ ᄳ䴠䶾❴⃢᠃ݝ⮱Ѻ㒛ȡ䄒❴⃢ч⼨㜠ᗕ⼨ߕ⮱
ܴѺ㒛ȡ
ᠶ̸ Command+E (Mac) ᝃ Ctrl+E (Windows)
ౕᒀ ⮱ݺEdit 喍㑃䒾喎䔶ࡧܳ⃢❴ޟȡ ౕ Grid喍㑾ᵩ喎ᐼ̸Ҭ⩕ Grabber喍ៀःக喎ጒڤ喑
ᄳ䴠䶾❴⃢᠃ݝ⮱Ѻ㒛ȡ䄒❴⃢ч䌠㜠ᗕ⼨ߕ⮱ᰭ
䓾㑾ᵩѺ㒛ȡ
ౕ Spot喍Ⴧ◦喎ᐼ̸Ҭ⩕ Grabber喍ៀःக喎ጒڤ喑
ᄳ䴠䶾❴⃢᠃ݝ⮱Ѻ㒛ȡ Spot 喍Ⴧ◦喎ᄦ䄊ᵳчក
ᐭ喑ᗕजͧ䄒❴⃢ᠴჇܴ⮱ᬣ䬡Ѻ㒛ȡ
㞯ᕔ䴠䶾ᓗ⣜ౕⳙᔮ̸ܳޟᎣ “ 㷘 “ ᠃ᰠ ” ᧺҉ ”
ᰶ ڠ㑃 䒾 হ 䛺 㑃 ᢿ 䴠 䶾 ⮱ 䄓 ㏳ Ԏ ᖜ喑䄤 ࣯ 㻮
ȨPro Tools ࣯㔰ᠴࢄȩ͚䔝 Edit Modes 喍㑃䒾
ᐼ喎হ Edit Tools 喍㑃䒾ጒڤ喎Ƞ Clip Groups
喍❴⃢㏱喎Вࣷ Elastic Audio喍ᑦᕔ䴠䶾喎⮱」㞯ȡ
Ҭ⩕㮇᠌ͽகУ㑃䒾 MIDI Ꮌ݄
В̸ӈ̭͗Ҹ喑ϸ㏺ຯ҂ౕ Instrument喍ͽக喎䒕䖀
̷㑃䒾 MIDI Ꮌ݄В⑁㮇᠌ͽகУȡ᱙Ҹ͚Ҭ⩕
AIR Music Technology ӈ⮱ Xpand!2 Уȡ
ϭ͵᭜ MIDI喤
MIDI 喍ͽகႄ⩹䲏喎ᢛᎣ䲋䴠䶾ȡ MIDI ̺чࣾܧ
ฝ䴠ȡ MIDI ᭜ MIDI 䃫ิ 喍ҸຯवகȠ䛴ᵤகȠ
ᣔݣகȠ䩛Ⰵহ䴠Ꮌக喎䬡⩕ᲒϑᢏᣔݣᢛহοⰥ
“ ᄦ䄊 ” ⮱̭ᐼȡ MIDI जᰶ᩵ॷⴒऱࣾฝ䃫ิ
喍ҸຯУवகᝃ䛴ᵤக喑ᝃ䒜У㮇᠌ͽக喎Ꮑ䄒⑁
҂ͽகȡ
݈ᐧͽக䒕䖀ᎣͽڒகУ喟
“ ” ڒ䔶᠖க
ᄳ Xpand!2 Уͽڒக䒕䖀
Ҭ⩕ใ䘕ᣔݣகᒂ ݣMIDI
Pro Tools Ӭᗕ䕇䓴 MIDI ᣔݣகᒂ ݣMIDI ᢛȡ
ౕͽக䒕䖀̷ᒂ ݣMIDI喟
3 䔶᠖̭͗䉊䶱䃫 喍Ό⼝ͧ “ 䴠㞟 ”喎
4 䔶᠖ Options > MIDI Thru 喍䔶䶦 > MIDI Thru喎ȡ ౕ “ ͽக ” 䒕͚䔶᠖ “ 䴠こ ” 㻳ఫ
喍䃑᭜॓ጟ䔶᠖ MIDI Thru 喠㠒ᅇ᱗䔶᠖喑䄤䔶᠖
䄒䔶䶦ȡ喎 2 䔶᠖ Pencil 喍䧲ぁ喎ጒڤᎣԊ㷘䃫㒛ͧᒿ㐅ݣȡ
ౕ Notes 喍䴠こ喎㻳ఫ͚ᄳٶᴴ⼨ ݝMIDI 䒕ᝃͽ
5 ࢂܨ䴠䒕͚⮱ Record Enable 喍ड़⩕ᒂ䴠喎ᠶ䧛喑 க䒕⮱᧚ᩫ㶕ࡧഌ̷ᬣ喑ٶᴴࢠअ Pencil 喍䧲ぁ喎
ड़⩕ͽக䒕䖀䔈㵹 MIDI ᒂ䴠ȡ ጒڤȡ
6 ౕ Transport喍䊝ፓᣔݣ喎⿄ऐ͚喑ࢂ ܨRecord喍ᒂ
ݣ喎ᠶ䧛ȡ
7 ⑁ MIDI ᣔݣக⮱䩛ⰅȡᗕᏁ䄒㘪ख़ݝ䔶⮱ฝ䴠ȡ
8 ۳ิສᐭᒂ䴠ᬣ喑ࢂ ܨPlay喍᧚ᩫ喎ᝃᠶ⾧ᵩ䩛ȡ
㠒㺮։喑䄤ࢂ ܨStop 喍։喎ᝃᠶ⾧ᵩ䩛ȡ
3 㠒㺮ౕၽ̷ ڒ4 ܳ䴠こ喑䄤ប㵹В̸᧺҉喟
• ᄳ Main Time Scale 喍ͨᬣ䬡ݨᏓ喎䃫㒛ͧ
Bars|Beats 喍ᄼ㞯 | ၽ喎ȡ
• ᄳ Edit 喍㑃䒾喎ᐼ䃫㒛ͧ Grid 喍㑾ᵩ喎ȡ
• ᄳ Grid 喍㑾ᵩ喎թ䃫㒛ͧ 4 ܳ䴠こȡ
ᒂͽ “ ݣக ” 䒕͚⮱ MIDI ᢛ • ᄳ Default Note Duration 喍吅䃑䴠こ䪬Ꮣ喎թ䃫ͧ
9 ܨࢂ⁎ں䴠䒕͚⮱ Record Enable 喍ड़⩕ᒂ䴠喎ᠶ䧛 4 ܳ䴠こ 喍ᝃ Follow Grid 喍䌌䮼㑾ᵩ喎喎ȡ
ज։ड़⩕ᒂ䴠Ꭳ᧚ᩫᒂ⃢❴⮱ݣȡ
ٶᴴᬣ䬡䒡Ѻ㒛
Ctrl (Windows) ᝃ Command (Mac) ⮱हᬣҬ⩕
Pencil 喍䧲ぁ喎ጒߕ᠃ڤ喑जᮯᬣ⺮⩕ Snap to
Grid 喍ᄦ命ݝ㑾ᵩ喎ߌ㘪ȡ
㑃䒾 MIDI 䴠こ
जౕ Edit喍㑃䒾喎⿄ऐᝃ MIDI Editor喍MIDI 㑃䒾க喎
⿄ऐ͚ᄦ MIDI 䴠こ䔈㵹㑃䒾喑࠲᠙䴠こ⮱ᐭ̻㐀
◦Ƞ䪬ᏓȠ䴠倅Вࣷ߈Ꮣぶȡ Selector 喍䔶᠖க喎 Ƞ
Grabber 喍ៀःக喎Ƞ Trim 喍ԛ᪡喎হ Pencil 喍䧲ぁ喎
ጒڤजВ᧺҉ࢂ͗䴠こᝃ㏱䴠こȡ
䔶᠖ MIDI 䴠こ
Ҭ⩕ Grabber喍ៀःக喎ጒڤ喑ᄳٶᴴ⼨ߕ⇎ݝᰶ䴠
こ⮱ౝ 喍䔶ᵳܧ⣝喎喑డ㐂㺮㑃䒾⮱䴠こ㏱᠃⩨ܧ
⩕ Pencil 喍䧲ぁ喎ጒڤ ⮱ڒMIDI 䴠こ ̭͗䔶ःᵳȡ
㠒㺮Ҭ䄒䴠こ⮱ޜ᱙䒙䄰ѳԊᠮ࣌䴠こ̺अ喑
䄤ᠶ Alt (Windows) ᝃ Option (Mac) 䩛⮱हᬣ
᠃ߕȡ
⩕ Selector 喍䔶᠖க喎ጒڤ䔶᠖䴠こ
⼨ߕ䴠こ
Ҭ⩕ Selector 喍䔶᠖க喎ጒڤᬣ喑㺮䔶ः䴠こ喑䔶᠖㠰
డ͚ᓲ䶨࠲क़䴠こ⮱䊤◦ȡ ̻᧺҉❴⃢⮱ᐼㆨѩ喑जВҬ⩕ Pencil 喍䧲ぁ喎ጒڤ
ᝃШ̭ Grabber喍ៀःக喎ጒڤጓठ᠃ߕ MIDI 䴠こᲒ
䴠こ䒙䄰 ᩦअႰЙౕ Pro Tools Timeline 喍ᬣ䬡䒡喎̷⮱䊤◦ȡ
㠒ౕ᠃ߕݺ䔶᠖γ็͗䴠こ喑݆ᄳ̭Ꭳ⼨ߕȡ
जВҬ⩕ Pencil喍䧲ぁ喎ጒڤᝃШ̭ Grabber喍ៀःக喎
ጒ ߕ᠃̸̷ڤMIDI 䴠こВᄦڣ䒙䄰ȡ㠒ౕ᠃ߕݺ䔶᠖ ⼨ߕ MIDI 䴠こ喟
γ็͗䴠こ喑݆чᄦ͗䴠こ䔈㵹䒙䄰ȡ
1 ᄳ MIDI 䒕ᝃͽக䒕䃫㒛 ݝNotes 喍䴠こ喎㻳ఫȡ
ᄦ MIDI 䴠こ䒙䄰喟 2 Ҭ⩕ Pencil喍䧲ぁ喎ጒڤᝃШ̭ Grabber喍ៀःக喎
ጒڤጓठ᠃ߕ䴠こ喍᠃ߕᬣᠶѼ Shift जԊᠮ䴠こ⮱
1 ᄳ MIDI 䒕ᝃͽக䒕䃫㒛 ݝNotes 喍䴠こ喎㻳ఫȡ 䴠倅̺अ喎ȡ
2 䔶᠖ Pencil喍䧲ぁ喎ጒڤᝃШ̭ Grabber喍ៀःக喎
᠃ߕ䴠こᬣ喑ٶᴴѺ㒛թᠴக喍ౕ Edit 喍㑃䒾喎⿄ऐ͚喎
ጒڤȡ
᭫䴠こ⮱䊤◦Ѻ㒛ȡ
3 ᠶѼ Shift ⮱हᬣ̷̸᠃ߕ䴠こȡ
㠒 Edit 喍㑃䒾喎ᐼ䃫㒛ͧ Grid 喍㑾ᵩ喎喑݆㷘᠃ߕ
䴠こᄳ㜗ߕ̻ᰭ䓾⮱㑾ᵩ䓦⩹ᄦ命喠 㠒 Edit喍㑃䒾喎ᐼ
䃫㒛ͧ Spot 喍Ⴧ◦喎喑݆чកᐭ Spot 喍Ⴧ◦喎ᄦ䄊ᵳȡ
㠒㺮ฺݣ䔶䴠こѳԊᠮ࣌䴠こ̺अ喑䄤ᠶ
Alt (Windows) ᝃ Option (Mac) 䩛⮱हᬣ
᠃ߕȡ
Ҭ⩕ Grabber 喍ៀःக喎ጒڤ䔈㵹䒙䄰
ߕ㑃䒾䴠こ߈Ꮣ
1 䔶᠖㺮ݍ䮑⮱䴠こȡ ⌤䴠䬡喑ᬣУহУУӈ➦᩵হԎतั⤳ȡ
2 ប㵹В̸᧺҉̭喟 Pro Tools 䮼䭱䴠䶾➦᩵ั⤳УຄУ喑जВ⩕λᩦअ
ᒂ⮱ݣฝ䴠ȡ᱙㞯ᄳ䄡ᬻ͑͗ᰶڠຯ҂Ҭ⩕Уั⤳
• 䔶᠖ Edit > Clear喍㑃䒾 > ⌲䮑喎পБݍ䮑䔶Ⴧ䴠こȡ ฝ䴠⮱Ҹȡ
䒕䖀⮱䮽क़ᣔݣகᢛԊᠮ̺अȡ
ᰶ ڠPro Tools 䮼䭱У⮱䄓㏳Ԏᖜ喑䄤࣯䬲
• ⩕ݖШᘼ㑃䒾ጒڤ喑ठ䩛ࢂܨШᘼ䔶Ⴧ⮱䴠こᎣ䔶᠖
Clear 喍⌲䮑喎ȡ Ȩ䴠䶾Уᠴࢄȩ喍Help > Audio Plug-ins Guide
喍ߖ > 䴠䶾Уᠴࢄ喎喎ȡ
• ᠶ䔭ᵩ䩛 (Windows) ᝃ Delete (Mac) 䩛ȡ
ݍ䮑̭⃢䔶Ⴧᬣ䬡㠰డ⮱ڲ䴠こᬣ喑ᄳहᬣݍ䮑 Ꮑ⩕ “ 㶎 ” ̻ “ ࢸ㑖 ”
⮱͚ڣᰶ䮽क़ᣔݣகহ㜗ߕࡃᢛȡ
ౕ䴠䶾⌤䴠ᬣ喑ᗕ䕇፥䰭㺮ᄦऱ͗䒕䖀Ꮑ⩕㶎হࢸ㑖
В㣤ᓄ␎ᘼ⮱ฝ䴠᩵ȡ
Ҭ⩕ Pencil 喍䧲ぁ喎ጒݍڤ䮑ࢂ͗ MIDI 䴠こ喟
㶎 (EQ) जൾ䕍ฝ䴠⮱䶾䅞ȡ㶎⮱̭͗キࢂҸၽᅞ
䔶͚ Pencil 喍䧲ぁ喎ጒऻڤ喑ᠶ Alt (Windows) ᝃ
᭜ᒵ็⿸Ҁฝ䴠৺㈨㐌̷⮱ѻ䴠হ倅䴠ᣔУȡҬ⩕䔆ψ
Option (Mac) 䩛⮱हᬣࢂܨ䴠こȡᠶ Alt
ᣔУजВߍ 喍๔喎ᝃۼᄼ 喍䭺ѻ喎䴠䶾⮱ѻ䶾হ倅
(Windows) ᝃ Option (Mac) ᬣ喑 Pencil
䶾䘕ܳȡҬ⩕ EQ जߖܳᐭ䉊थহशЃȠ倅呀ฝȠ
喍䧲ぁ喎ጒڤअͧᾎ⯛ᨓȡ
⾮ܧฝͽ喑⩇㜠जВ⊵䮑̺ᓲ㺮⮱ฝȡ Pro Tools ӈ
็̺हㆨಸ⮱ EQ У喑⩕λൾ䕍ฝ䴠ȡ
Compression 喍ࢸ㑖喎ज䃖䴠䶾ߕᔮअᓄᰡߍ≮⩲ȡ
ᅞ䆎᭜̭͗䴠䛼㜗ߕᣔݣ喑䃖৺ϛ⮱䘕̺ܳ㜠䓴λ倅Ϗȡ
Ҭ⩕ࢸ㑖ज䃖ฝͽ䘕ܳख़䊤Გᰡͧϟܴ喑ᝃ䃖䨆䧦ख़䊤
Გ̺㜠λ๗ݧ㕠ȡҬ⩕䭽ݣகज䃖䴠䶾Ԏत⮱ምթ䘕ܳ
⩕ݖPencil 喍䧲ぁ喎ጒݍڤ䮑䴠こ ̺ч䊲ܧ䬵թ喑ϻ㔹̺ᒞ৺ѻλₑ⩢Ꭰ⮱䴠䶾᩵ȡ
Pro Tools ӈ็̺हㆨಸ⮱ߕᔮУ喑⩕λൾ䕍ฝ
䴠⮱ߕᔮȡ
䴠㞟अࡃθУহ㈨㐌̀⩕ԎᖜθУΌजВҬ⩕
Pencil 喍䧲ぁ喎ጒڤ䕇䓴 Alt- ࢂ( ܨWindows) ᝃ
Option- ࢂ( ܨMac) 䔈㵹ݍ䮑ȡ
4 ᐭఋᩫВ㕳ख़᩵ȡ
4 ᐭఋᩫВ㕳ख़᩵ȡ
3 ౕ݇݇⌨ߍ⮱ Auxiliary Input 喍䒲ߖ䓀ڒ喎䴠䒕̷喑ࢂ ܨTrack Input 喍䒕䖀䓀ڒ喎䔶᠖கᎣ䔶᠖ Bus > Bus 1–2
喍ᕨ㏬ > ᕨ㏬ 1-2喎 .
“ 䒕䖀䓀 ” ڒ䔶᠖க
ౕ䒲ߖ䓀ڒ䒕䖀̷ϻ䓀ڒ䔶᠖க䔶᠖ᕨ㏬ 1-2
“ ࣾ䔮 A” 䔶᠖க
9 㐔㐚᧚ᩫহ㕳ख़喑䄰᪡ऱ͗䴠䒕ࣾ䔮䴠䛼喑Ꭳᷭᴒ̺हУ䃫Ⴧ喑ϻ㔹ឫݝᗕ㺮⮱⌤䴠᩵ȡ
ౕす̭⁎㜗ߕࡃ᧺҉ऻ喑जВ䕇䓴䔶᠖㼓ᦥᐼ
ा䒕䖀͚ڒۆ㜗ߕࡃ喟
ᝃᵀ䔋ᐼᄳ䭱ߍ㜗ߕࡃڒۆ䄒䒕䖀喑㔹̺ᓲႹ
1 䔶᠖ Window > Automation 喍⿄ऐ > 㜗ߕࡃ喎ȡ ݍڕ䮑⮱ݺٵ㜗ߕࡃ᧺҉ȡ䔆ψᐼगᰶౕᗕ
䭲⼨ߕᣔУᬣч㜗ߕࡃȡ
2 Ԋ㜗ߕࡃㆨಸัλڒۆड़⩕⟣ᔮȡ
ߕ㑃䒾㜗ߕࡃ
“ 䒕䖀㜗ߕࡃᐼ ”
䔶᠖க ᄦλ̭͗ጒ⼸͚⮱ᰶ䒕䖀喑 Pro Tools ӈ็∂
⩕λ㑃䒾㜗ߕࡃᢛȡᗕजВ䄰᪡Ш҂㜗ߕࡃ᧚ᩫ㶕͚
⮱ܳ⩹◦喑Вఫᒏᐼ㑃䒾㜗ߕࡃᢛȡΌजВ⩕㑃䒾
“ 㜗ߕࡃ ” ⿄ऐ 䴠䶾হ MIDI ᢛ⮱Ⱕह∂ᲒܴޗȠᠤ䉊হ㇅䉡㜗ߕ
ࡃᢛȡ
㜗ߕࡃᢛ᭜⩕⩞ज㑃䒾ܳ⩹◦㏱⮱㏬ᒏ㶕⮱ȡ
ౕ᧚ᩫ䓴⼸͚⼨ߕ
䴠䛼ᣕၽ
㜗ߕࡃܳ⩹◦
䕇䓴᠃ߕ䔆ψܳ⩹◦喑जВⰡᣒౕ㑃䒾⿄ऐহ MIDI 㑃䒾
க⿄ऐ͚ԛᩦ㜗ߕࡃᢛȡ̷̸᠃ߕ㜗ߕࡃܳ⩹◦ᬣ喑
թ⮱अࡃч᭫ܧᲒȡ
㜗ߕࡃ⿄ऐ 喍ጟड़⩕䴠䛼㜗ߕࡃ喎
㜗ߕࡃܳ⩹◦թ
“ 䴠䒕㻳ఫ ”
䔶᠖க
“ 㜗ߕࡃㆨಸ ” Ҭ⩕䧲ぁጒݍڤ䮑ܳ⩹◦
䔶᠖க
Ҭ⩕ “ ԛ᪡ ” ጒڤ
䴠䛼㜗ߕࡃ
㻳ఫ Ҭ⩕ “ ԛ᪡ ” ጒౕڤ䔶ࡧڲШᘼ᠃ߕ喑जВा̷ᝃा̸䄰
㞯ᰶ䔶Ⴧ⮱ܳ⩹◦ȡ
㜗ߕࡃ 㵹
䴠䒕㻳ఫহ㜗ߕࡃ㵹
Ҭ⩕ៀःகጒڤ Ҭ⩕ԛ᪡ጒ◦⩹ܳߕ⼨ڤ
Ҭ⩕ៀःகጒܨࢂڤ㏬ᒏज݈ᐧ⮱ܳ⩹◦喑ᝃ㔲⩕ៀ
ःகጒߕ᠃ڤ⣝ᰶܳ⩹◦जВᄦႰЙ䔈㵹䄰᪡ȡᠶѼ
Option (Mac) ᝃ Alt (Windows) ⮱हᬣ⩕ៀःகጒڤ
ࢂ◦⩹ܳܨजᄳܳ⩹◦ݍ䮑ȡ
Ҭ⩕ៀःகጒڤᐧܳ⩹◦
ᄳ⌤䴠ϻጒ⼸ᄩ⿸ͧܧҀฝ䴠䶾᪴У喟
“ 䔶᠖க ” ጒڤ
ᬣ䬡䒡䔶ࡧ
ጟ䔶᠖Ꭳ́۳ิᎣ䒕㜠
ⷮⰅ⮱ጒ⼸䴠䶾
2 䔶᠖ File > Bounce to > Disk喍᪴У > Ꭳ䒕Ⰵⷮ > ݝ喎ȡ 3 ౕ Bounce Options 喍Ꭳ䒕䔶䶦喎ᄦ䄊ᵳ͚喑ប㵹В
̸᧺҉喟
• 䔶᠖ Bounce Source 喍Ꭳ䒕⎽喎喍䔆ᄳ᭜⌤䴠⮱ͨฝ
䖀䌜ᒱ喑Ҹຯ main (Stereo) –> Analog 1–2喎ȡ
• 䔶᠖ File Type 喍᪴Уㆨಸ喎喍Ҹຯ WAV喎ȡ
• 䔶᠖ Interleaved 喍ऍߍ喎⩕λ Format 喍ᵩᐼ喎ȡ
• 㠒㺮ᄳᎣ䒕䴠䶾᪴Уݨᒂ ݝCD ̷喑䄤䔶᠖ 16 ℁➦
҉ͧ℁➦Ꮣȡ
• 㠒㺮ᄳᎣ䒕䴠䶾᪴Уݨᒂ ݝCD ̷喑䄤䔶᠖ 44.1 kHz
҉ͧ䛴ᵤ⢴ȡ
• 㠒㺮䊲䊷ᬣᎣ䒕䕌Ꮣ喑䄤䔶᠖ Offline ( ⻨㏬ ) 䔶
䶦ȡ
4 ࢂ ܨBounce 喍Ꭳ䒕喎ȡ喍㠒ᗕ⇎ᰶ䔶᠖ᬣ䬡䒡䔶ࡧ喑
݆᪡͗ጒ⼸ᄳϻᐭᎣ䒕ݝ㐀ȡ喎
5 ౕ Save 喍Ԋႅ喎ᄦ䄊ᵳ͚喑䩛ڒᎣ䒕⮱䴠䶾᪴У⮱
ऺ⼝喑♣ऻ䔶᠖㺮Ԋႅ⮱Ѻ㒛ȡ
Bounce 喍Ꭳ䒕喎ᄦ䄊ᵳ
6 ࢂ ܨSave 喍Ԋႅ喎ȡ
ᄳ⌤䴠ݨᒂ ݝCD ̷
ႹᎣ䒕ऻ喑ᗕजВҬ⩕ CD ݨᒂ䒜У 喍ຯ iTunes ᝃ
Roxio Toast喎ᄳ⩌⮱䴠䶾᪴Уݨᒂݝ䴠䶾 CD ͚喑
ВӬౕᴴ۳ CD ᧚ᩫக̷䔈㵹᧚ᩫȡౕጒ҉ბВใ⮱⣜
ධ͚㕳ख़࣯㔰 CD ᭜侹䃮⌤䴠ຯ҂䒙ᢏ㜠ڣЃ㈨㐌̻㕳
ख़⣜ධ⮱㵹ᰶ᩵⮱ᐼȡ
γ㼐ᰡ็
Йጹ᱈䕇䓴䔆͗ Pro Tools ᔘ䕌ϸ㏺喑㘪⓭ࣾ䊤ᗕ݈
҉䴠ͽ⮱ڡ䋐ȡ㠒㺮γ㼐ڠλ䬽䔝Ш҂䄊䷅⮱ᰡ็
Ԏ ᖜ喑䄤࣯ 䬲 ȨP r o To o l s ࣯㔰ᠴࢄȩ喍H e l p >
Pro Tools Reference Guide 喍ߖ > Pro Tools ࣯㔰
ᠴࢄ喎 喎͚ڠλᰶ Pro Tools ㈨㐌ࣷ䒜У⮱Ⴙ᪡䄓㏳
ԎᖜȡȨPro Tools ࣯㔰ᠴࢄȩ䕇䓴䴠䶾হ䴠ͽ҉ݣШߎ
喍ҸຯᒂݣȠ㑃䒾হ⌤䴠喎ᄦᰶ Pro Tools ߌ㘪হắ
ᔢևγ䔼ᒨ⮱㼐䛷ȡ