o Manufacturer – DAP Products Inc. o Storage – Keep away from heat and sources of ignition. Protect material from direct sunlight. Keep containers tightly closed in a dry, cool and well-ventilated place. Do not store at temperatures above 120 degrees F. Store containers away from excessive heat and freezing. Store away from caustics and oxidizers o Handling – Make sure nozzle is directed away from yourself prior to discharge. Keep away from open flames, hot surfaces and sources of ignition. Avoid breathing vapor and contact with eyes, skin and clothing. Use only with adequate ventilation. Open all windows and doors or use other means to ensure cross-ventilation and fresh air entry during application and drying. Odor is not an adequate warning for hazardous conditions. Provide fresh air such that chemical odors cannot be detected during use and while drying. Do not breathe dust. While dry sanding, use of a NIOSH-approved dust mask is recommended. Wash thoroughly after handling. o Toxicity – this item is toxic Ingestion – do not induce vomiting; seek medical attention immediately Inhalation – remove to fresh air; if not breathing, give artificial respiration; if breathing is difficult, give oxygen; get medical attention immediately Eye Contact – immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides; get medical attention immediately Skin Contact – remove and wash contaminated clothing; wash off immediately with soap and plenty of water; use a rag to remove excess foam from skin and remove contaminated clothing; use of a solvent, such as acetone (nail polish remover) or mineral spirits, may help in removing uncured foam residue from clothing or other surfaces (avoid eye contact); cured foam may be physically removed by persistent washing with soap and water. If irritation develops, use mild skin cream; if irritation persists, obtain medical attention o Flammability – this item is a category one flammable aerosol (extremely flammable aerosol) Zinsser Bulls Eye Shellac o Manufacturer – Rust-Oleum Corporation o Storage – keep containers tightly closed; isolate from heat, electrical equipment, sparks and open flame; keep away from heat, sparks, flame and sources of ignition; keep container closed when not in use; product should be stored in tightly sealed containers and protected from heat, moisture, and foreign materials; store in a dry, well ventilated place; keep container tightly closed when not in use; avoid excess heat; do not store above 120 ° F; store large quantities in buildings designed and protected for storage of NFPA Class II combustible liquids o Handling – wash thoroughly after handling; wash hands before eating; use only with adequate ventilation; follow all MSDS/label precautions even after container is emptied because it may retain product residues; remove contaminated clothing and launder before reuse; avoid breathing fumes, vapors, or mist; avoid contact with eyes, skin and clothing o Toxicity – this item is toxic Ingestion – aspiration hazard: do not induce vomiting or give anything by mouth because this material can enter the lungs and cause severe lung damage; get immediate medical attention; if swallowed, get medical attention Inhalation – remove to fresh air; if not breathing, give artificial respiration; if breathing is difficult, give oxygen; get immediate medical attention; do not use mouth-to-mouth resuscitation; if you experience difficulty in breathing, leave the area to obtain fresh air; if continued difficulty is experienced, get medical assistance immediately Eye Contact – immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open; get medical attention; do not allow rubbing of eyes or keeping eyes closed Skin Contact – Wash skin with soap and water; remove contaminated clothing; get medical attention if irritation develops or persists. o Flammability – this is item is a category two flammable liquid (highly flammable liquid and vapor)