You are on page 1of 57

LICENCIAMIENTO

PROCESOS DEL EQUIPO


PROCESO DE MONITOREO
Información general del equipo:
Versión CIT
Interfaces
Fecha y Hora
Tiempo de encendido
Estado de Interfaces
Licencias activas
Estadísticas y errores para todas las
interfaces

Estadísticas adicionales por interfaz


TELDAT_H1 +system cpu-text
CPU Short-Term Usage (5 sec.): 1.6%
CPU Medium-Term Usage (1 min.): 1.6%
CPU Long-Term Usage (5 min.): 1.4%

TELDAT_H1 +system cpu-graph


CPU usage during the last 5 minutes (%):

100_ 111111111211111111111211111111111211111111111211111211212222
90_|
80_|
70_|
60_|
50_|
40_|
30_|
20_|
10_|
0_|____________________________________________________________
5min. 1min. 0
PROCESO DE CONFIGURACIÓN
TELDAT_H1 *config
TELDAT_H1 Config>file list
Config Media: Flash only
A: SOLO_3G.CFG 1208 01/01/00 00:28 Flash
A: CONFIG.DEF 205 03/07/11 11:59 Flash
A: ROUTER.CFG 3787 01/01/00 01:52 Flash
A: WIFI.CFG 463 01/01/00 00:00 Flash
A: SIGRES.CFG 12823 01/01/00 00:07 Flash
A: TEMP.CFG 4365 01/01/00 00:09 Flash
Flash Available Space : 512 Kbytes
Flash Backup Available Space : 0 Kbytes

TELDAT_H1 Config>file type A:TEMP.CFG


TELDAT_H1 Config>user teldat password teldat
TELDAT_H1 Config>set hostname TELDAT_H1
TELDAT_H1 Config>banner login "Equipo de Laboratorio"
TELDAT_H1 Config>time set
Month[1]? 5
Day[5]? 8
Year[0]? 2012
Week day (1 Monday, 7 Sunday)[3]? 2
Hour[6]? 16
Minute[42]? 29
Seconds[47]? 00
CONFIGURACIÓN DE INTERFACES
add device ppp 1
add device bvi 0
add device loopback 1
add device eth-subinterface ethernet0/0 100
network loopback100
; -- Loopback interface configuration --
ip address 172.28.15.254 255.255.255.255
;
exit
;
network ethernet0/0
; -- Ethernet Subinterface Configuration --
description LAN
ip address 192.168.125.5 255.255.255.0
;
exit
;
network bvi0
; -- Bridge Virtual Interface configuration --
description BRIDGE
;
ip address 192.168.100.254 255.255.255.0
;
exit
CONFIGURACIÓN VLAN
Configuración VLAN
INTERFAZ BRIDGE
add device bvi 0
;
protocol asrt
; -- ASRT Bridge user configuration --
bridge
irb
port ethernet0/0 1
port wlan0/0 2
route-protocol ip
exit
;
network bvi0
; -- Bridge Virtual Interface configuration --
description LAN
;
ip address 192.168.100.254 255.255.255.0
;
exit
RUTAS ESTATICAS
protocol ip
; -- Internet protocol user configuration --
route 0.0.0.0 0.0.0.0 10.10.10.4
route 10.129.0.10 255.255.255.255 tnip3
route 10.201.0.1 255.255.255.255 10.10.10.1 200 track nsla-advisor 1
route 172.24.10.1 255.255.255.255 ppp1
route 172.28.0.0 255.255.0.0 10.10.10.1
exit
OSPF
TELDAT_H1 OSPF config>show config
;
enable ospf
;
area 0.0.0.0 default
;
as-boundary-routing default
as-boundary-routing import subnet-routes
as-boundary-routing import direct-routes
as-boundary-routing import static-routes
as-boundary-routing import default-routes
;
interface 10.0.0.1 default
;
redistribute connected
TELDAT_H1 *monitor
Console Operator

TELDAT_H1 +protocol ospf

-- Open SPF-Based Routing protocol monitor --

TELDAT_H1 OSPF+neighbor

Neighbor addr Neighbor ID State LSrxl DBsum LSreq Ifc


10.0.0.2 10.0.0.2 128 0 0 0 ethernet0/1

TELDAT_H1 OSPF+exit
TELDAT_H1 +protocol ip

-- IP protocol monitor --

TELDAT_H1 IP+dump-routing-table
Type Dest net/Mask Cost Age Next hop(s)

sbnt(0)[0] 10.0.0.0/8 [240/1 ] 0 none


spf(0)[1] 10.0.0.0/30 [ 0/1 ] 1 ethernet0/1
dir(0)[1] 192.168.100.0/24 [ 0/1 ] 0 bvi0
spe2(0)[0] 192.168.200.0/24 [150/1 ] 1 10.0.0.2 (ethernet0/1)

Routing table size: 2500 nets (210000 bytes), 4 nets known, 4 shown
BGP
TELDAT_H1 *config
TELDAT_H1 Config>protocol bgp

-- Border Gateway Protocol user configuration --


TELDAT_H1 BGP config>show config
; Showing Menu and Submenus Configuration for access-level 15 ...
; H1+ WAN WL USB IPSec SNA VoIP T+ Router 26 144 Version 10.08.29

enable
;
as 100
export as 200 prot all all
;
group type external peer-as 200
; -- BGP group configuration --
peer 10.0.0.2
exit
;
import as 200 all
;
exit
TELDAT_H1 *monitor
Console Operator

TELDAT_H1 +protocol bgp


TELDAT_H1 BGP+summary
Configuration running
Neighbor V AS MsgRcvd MsgSent NumEst State Time
10.0.0.2 4 200 4 5 1 Established 9s
BGP summary, 1 group, 1 peer.

TELDAT_H1 BGP+routes received_from_peer 10.0.0.2


Flags: A active, M multipath, D deleted, N not install, I incomplete
Proto Route/Mask NextHop Pref Pref2 Metr Metr2 ASPath
---N- BGP 10/30 10.0.0.2 -170 0 1 none (100) 200 Incomplete (Id 2)( 202056)
A---- BGP 192.168.200/24 10.0.0.2 170 0 1 none (100) 200 Incomplete (Id 2)( a02010)

TELDAT_H1 BGP+exit
TELDAT_H1 +protocol ip
-- IP protocol monitor --
TELDAT_H1 IP+dump-routing-table
Type Dest net/Mask Cost Age Next hop(s)

sbnt(0)[0] 10.0.0.0/8 [240/1 ] 0 none


dir(0)[1] 10.0.0.0/30 [ 0/1 ] 0 ethernet0/1
dir(0)[1] 192.168.100.0/24 [ 0/1 ] 0 bvi0
bgp(0)[0] 192.168.200.0/24 [170/1 ] 0 10.0.0.2 (ethernet0/1)

Routing table size: 2500 nets (210000 bytes), 4 nets known, 4 shown
DHCP
protocol dhcp
; -- DHCP Configuration --
server
; -- DHCP Server Configuration --
enable
;
;
shared 1
;
subnet local 1 network 192.168.100.0 255.255.255.0
subnet local 1 range 192.168.100.1 192.168.100.253
subnet local 1 router 192.168.100.254
subnet local 1 dns-server 8.8.8.8
;
exit
;
exit
IPSEC
feature access-lists
; -- Access Lists user configuration --
access-list 300
entry 1 default
entry 1 permit
entry 1 source address 27.0.0.1 255.255.255.255
entry 1 destination address 192.168.11.1 255.255.255.255
;
entry 2 default
entry 2 permit
entry 2 source address 27.0.0.1 255.255.255.255
entry 2 destination address 28.0.0.1 255.255.255.255
;
exit
exit
;
protocol ip
ipsec
; -- IPSec user configuration --
enable
assign-access-list 300
;
template 1 default
template 1 isakmp aes256 sha1
template 1 source-address 10.10.10.2
template 1 destination-address 10.10.10.4
template 1 ike mode aggressive
template 1 ike group two
;
template 2 default
template 2 dynamic esp aes256 sha1
template 2 source-address 10.10.10.2
template 2 destination-address 10.10.10.4
template 2 mapped-to-ifc ethernet0/1
;
map-template 300 2
key preshared ip 0.0.0.0 ciphered 0x0DD598B4F74E201E
exit
;
exit
WLAN
network wlan0/0
; -- Wireless LAN Interface. Configuration --
description WiFi
bss "TELDAT_H1"
privacy-invoked
rsn wpa
cipher aes-ccmp
akm-suite psk
wpa-psk passphrase ciphered 0x84442C0AB7237103FC1C71F2DFABEE9F
exit
;
exit
REDES MOVILES (WWAN)
add device ppp 1
;
global-profiles dial
; -- Dial Profiles Configuration --
profile H1 default
profile H1 dialout
profile H1 3gpp-accessibility-control traffic 100 all
profile H1 3gpp-apn internet.movistar.com.co
;
exit
;
global-profiles ppp
; -- PPP Profiles Configuration --
lcp-options cellular1/1 default
lcp-options cellular1/1 acfc
lcp-options cellular1/1 pfc
lcp-options cellular1/1 accm 0
;
exit
network cellular1/0
; -- Interface AT. Configuration --
coverage-timer 10
network mode automatic
network domain cs+ps
exit
;
network ppp1
; -- Generic PPP User Configuration --
ip address unnumbered
;
ppp
; -- PPP Configuration --
chap refuse
ipcp local address assigned
no ipcp peer-route
lcp echo-req off
exit
;
base-interface
; -- Base Interface Configuration --
base-interface cellular1/1 link
base-interface cellular1/1 profile H1
;
exit
;
exit
TELDAT_H1 *monitor
Console Operator

TELDAT_H1 +network cellular1/0

-- AT Console --

TELDAT_H1 cellular1/0 AT+network status


Querying...Please wait...
Registration state: Home network
PLMN Public Land Mobile Network code: 732123
PLMN Public Land Mobile Network name: movistar
Cell Location Area Code 0x0588 (1416), Identification 0x662b (26155)
System Mode WCDMA
Available module bands:
"GSM850","GSM900","GSM1800","GSM1900","UMTS850","UMTS1900","UMTS2100" (00df)
Available band: "UMTS850"
Network technology currently in use: HSDPA/HSUPA
UTRAN Radio Frequency Channel Number: 4423
Receive signal code power of the active set's strongest cells(RSCP): -77 dBm
Total energy per chip per power density value of set's strongest cells(EcIo): -13 dB
Last EcIo measured in WCDMA DATA mode: -13 dB
Primary Scrambling Code (PSC) 0x0034 (52)
RRC State: 3 - CELL_PCH
RX level (dBm):-75
Coverage level: 4 (**** )
TELDAT_H1 +network cellular1/1

-- AT Console --

TELDAT_H1 cellular1/1 AT+LIS


TELDAT_H1 cellular1/1 AT+list
Daughter Board = SOFTUSB Device Adapter
Module Manufacturer = QISDA
Module Model = H20
Module Firmware = Qisda Build Ver: 7225A-SLCAAVZA-3240,SW Ver: 1.09_1,Boot Block v
IMEI = 353030020211835
IMSI = 732123428333386
SIM Card ICC = 8957123110531047472F
Drop by ping failed =0
Drop by tracert failed =0
Drop by traffic failed =0
Dialers registered = H1
Current dialer registered = H1
State = (5) CONNECT
Call request =1
Access Point Name = internet.movistar.com.co
Total connection time = 1 minute 13 seconds
Current connection time = 1 minute 13 seconds
Time to stablish connection= 2 sec
TELDAT_H1 +protocol ip

-- IP protocol monitor --

TELDAT_H1 IP+interface-addresses
Interface IP Addresses:
-----------------------
Ethernet0/1 10.0.0.1/30
ppp1 unnumbered - using global-address (186.168.35.186)
bvi0 192.168.100.254/24

Special IP Addresses:
---------------------
Internal-address 0.0.0.0
management-address 0.0.0.0
router-id 10.0.0.1
global-address 186.168.35.186
LISTAS DE ACCESO
feature access-lists
; -- Access Lists user configuration --
access-list 100
description NAT
;
entry 1 default
entry 1 permit
entry 1 source address 192.168.0.0 255.255.255.0
;
exit
;
access-list 101
description MARCACION_PLATA
;
entry 1 default
entry 1 permit
entry 1 destination address 200.35.120.2 255.255.255.255
;
exit
;
access-list 102
description MARCACION_ORO
;
entry 1 default
entry 1 permit
entry 1 destination address 69.21.200.10 255.255.255.255
;
exit
access-list 103
description BW_PLATA
entry 1 default
entry 1 permit
entry 1 ds-field 10
;
exit
;
access-list 104
description BW_ORO
entry 1 default
entry 1 permit
entry 1 ds-field 18
exit

access-list 300
entry 1 default
entry 1 permit
entry 1 source address 27.0.0.1 255.255.255.255
entry 1 destination address 192.168.11.1 255.255.255.255

entry 2 default
entry 2 permit
entry 2 source address 27.0.0.1 255.255.255.255
entry 2 destination address 28.0.0.1 255.255.255.255
;
exit
CALIDAD DE SERVICIO
feature bandwidth-reservation
; -- Bandwidth Reservation user configuration --
network ethernet0/1
enable
class local 10
;
class default 40
;
class plata 50
;
class oro 50
;
;
access-list 103 plata high
access-list 104 oro urgent
;
rate-limit 2048
exit
;
exit
feature route-map
; -- Route maps user configuration --
route-map "MARCACION"
network bvi0
entry 1 default
; -- Bridge Virtual Interface configuration --
entry 1 permit
description LAN_ROUTER
entry 1 match ip address 101
;
entry 1 set ip dscp 10
ip address 192.168.0.1 255.255.255.0
;
;
entry 2 default
ip policy route-map MARCACION
entry 2 permit
;
entry 2 match ip address 102
exit
entry 2 set ip dscp 18
;
exit
;
exit
PROTOCOLOS DE REDUNDANCIA EN
REDES LOCALES
network ethernet0/1
; -- Ethernet Interface User Configuration --
;
ip address 10.10.10.2 255.255.255.0
;
ip tvrp 1 ip 10.10.10.1
ip tvrp 1 priority 255
ip tvrp 1 track-interface ethernet0/0.1
;
exit
;
protocol ip
; -- Internet protocol user configuration --
;
tvrp
; -- TVRP Configuration --
enable
;
exit
;
exit
network ethernet0/1
; -- Ethernet Interface User Configuration --
description LAN_NETWORK
;
ip address 10.10.10.2 255.255.255.0
;
ip vrrp 1 ip 10.10.10.1
ip vrrp 1 priority 105
ip vrrp 1 track destination-ip 1.1.1.1
;
exit
;
protocol ip
; -- Internet protocol user configuration --
vrrp
; -- Virtual Router Redundancy Protocol configuration --
accept-vip-packets
;
exit
;
exit
MODULO DE TELECONTROL
TELDAT_H1 *monitor
TELDAT_H1 +feature power-switch
TELDAT_H1 POWER-SWITCH+?
off Cut off the power supply
on Supply power
reset Equivalent to an OFF command which after 10 seconds is followed by an ON
status Display the status (ON/OFF)
version Display the code version
exit
ACTUALIZACIÓN
Jorge Eduardo Lozano Rojas
Profesional de Producto Sr.
jorge.lozano@networkstestamerica.com
Networks Test America
Carrera 67 No 100 - 20 Oficina 501
Tel: +57-1-3564599
Bogotá D.C.

You might also like