Professional Documents
Culture Documents
CIRCUIT DESCRIPTION
The exhaust solenoid discharges high pressure air from the system by opening the solenoid valve according
to the signal from the suspension control ECU.
DTC No. DTC Detecting Condition Trouble Area
Either the condition 1. or 2. is detected:
1. With the exhaust solenoid valve inactivated, an open
S Exhaust solenoid valve
signal of the exhaust solenoid valve is detected for 1
C1735 S Exhaust solenoid valve circuit
sec. or more.
S Suspension control ECU
2. With the exhaust solenoid valve activated, a short
signal of the valve is detected 8 times successively.
WIRING DIAGRAM
Air Suspension ECU
Short Connector (Suspension Control ECU)
H12
(Height Control)
Height Control Exhaust Valve
7 7 5
W−B V−Y V−Y
S9 S8 A20 SLEX
2 1
EB
F45823
INSPECTION PROCEDURE
1 RECONFIRM DTC
OK
OK
Suspension Control ECU: (a) Disconnect the suspension control ECU A20 connector.
(b) Measure the resistance according to the value(s) in the
table below.
Standard:
A20
Tester Connection Specified Condition
A20−5 (SLEX) − H12−1 (SLEX) Below 1 Ω
A20−5 (SLEX) − Body ground 10 kΩ or higher
SLEX
G25094 F44492
H12
OK
Exhaust Solenoid Valve: (a) Measure the resistance according to the value(s) in the
table below.
Standard:
H12 Tester Connection Specified Condition
H12−2 (GND) − Body ground Below 1 Ω
OK