Professional Documents
Culture Documents
Informations
Informations
my design is a development of a previous design from previous study (I will send you the
pervious study)
whereby, in the previous study they changed the length of aluminum blocks gradually, with 5
channels, and the coolant flow in one direction (check previous study to understand).
But in my design I keep the length of the aluminum blocks constant and increase one more
channel (6 channels total) and the coolant will flow in counter-flow to cool the battery cells
evenly and decrease the temperature difference (see figure below).
The geometry of the model is same as the previous study except adding one more channel and
keeping the length of the aluminum blocks constant and the direction of the coolant flow.
Run the simulation with 3 different inlet velocities; 0.1 m/s , 0.2 m/s, 0.3 m/s , and optimize the
best design,
Get the results and compare it with the previous study
Get all battery specifications (c-rate, properties, dimensions, etc..) and heat generation from one
cell
Wam
WhatsApp: +966580701636